Civil Engineering Commons^™

Implementing Online Updating To Complex Hysteresis Models In Real- Time Hybrid Simulation Using Constrained Unscented Kalman Filter, Bilal Ahmed Mohammed

Masters Theses

Although conventional experimental methods, such as quasi-static testing, shake table testing, etc., perform well to evaluate structural seismic performance necessary for modern seismic design, the quasi-static loading and/or reduced scale specimen used in shake table testing may not provide true dynamic responses of structural systems. To overcome these limitations, real-time hybrid simulation (RTHS) was developed, which is a combination of physical testing of the experimental substructure and analytical simulation of the numerical substructure. With the advancement of hybrid simulation, it is now possible to economically test large to full-scale specimens in laboratories at the real earthquake rate. Online model updating …

How Student Written Communication Skills Benefit During Participation In An Industry-Sponsored Civil Engineering Capstone Course, Ryan N. Fries, Bradford Cross, Jianpeng Zhou, Chad Verbais

SIUE Faculty Research, Scholarship, and Creative Activity

Because many engineering programs use capstone design courses and value strong communication abilities, authors sought to identify how student written communication skills changed because of industry-sponsored capstone design projects. A student exit survey was collected at the end of the capstone design course during faculty-led projects and projects led by practicing engineers in industry. These results led the researchers to subsequently evaluate two semesters of before-andafter writing samples using a rubric. Student surveys suggested a statistically significant increase in learning about professional issues, problem solving, and written/oral communication. Evaluation of student writing samples suggests that the students significantly improved their …

A Mechanistic-Empirical Impact Analysis Of Different Truck Configurations On A Jointed Plain Concrete Pavement (Jpcp), Lubinda F. Walubita, Tito P. Nyamuhokya, Stefan A. Romanoschi, Xiaodi Hu, Mena I. Souliman

Civil Engineering Faculty Publications and Presentations

Until the last decade, the 1993 American Association of State Highway and Transportation Officials (AASHTO) design guide has been traditionally used for the design of flexible and rigid pavements in the USA and some parts of the world. However, because of its inability to meet the new traffic and material challenges, a Mechanistic Empirical Pavement Design Guide (MEPDG) was introduced based on an NCHRP 1-37 A study conducted in 2004. This study used the MEPDG software and associated models to determine, through comparative truck damage analysis, the effects of nine different truck configurations on a 12 inch-jointed plain concrete pavement …

Behavior And Strength Of Rc Spandrel Members Under Unsymmetrical Bending And Torsion Including Cfrp Retrofitting, Muhammad Fahim

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents the outcome of an experimental and theoretical investigation of the behavior and strength of reinforced concrete spandrel members both with and without carbon fiber reinforced polymer (CFRP) retrofitting. Both isolated spandrel members with L-shaped cross section as well as those integrated with reinforced concrete slabs are studied. A series of isolated spandrel members were tested under separate and combined actions of unsymmetrical bending and torsion. Six of these specimens were retrofitted externally with high-strength CFRP strips. Materially nonlinear analysis procedures are also formulated and programmed for the spandrel members with and without CFRP retrofitting. Furthermore, ultimate bending-torsion …

A Plastic Design Method For Rc Moment Frame Buildings Against Progressive Collapse, Hadi Faghihmaleki

Makara Journal of Technology

In this study, progressive collapse potential of generic 3-, 8- and 12-storey RC moment frame buildings designed based on IBC-2006 code was investigated by performing non-linear static and dynamic analyses. It was observed that the model structures had high potential for progressive collapse when the second floor column was suddenly removed. Then, the size of beams required to satisfy the failure criteria for progressive collapse was obtained by using the virtual work method; i.e., using the equilibrium of the external work done by gravity load due to loss of a column and the internal work done by plastic rotation of …

In Vitro Toxicity Evaluation Of Caffeine Imprinted Polymer (Caf-Mip) For Decaffeination Method On Normal Chang Liver Cells, Fatimah Hashim, Faizatul Shimal Mehamod, Naizatul Akmal Nawi

Makara Journal of Technology

Over consuming of caffeine is one of the factors to a few health problems such as insomnia, hypertension and cardiovascular disease. This preliminary study was conducted to evaluate the Caffeine-Imprinted Polymer (CAF-MIP) toxicity that was synthesized for a new alternative method for decaffeination. It is crucial to evaluate the toxicity of CAF-MIPas this product is potential to be used as complimentary with any drinks containing caffeine. In this study, the CAF-MIP toxicity potential was confirmed on Normal Chang Liver cell (NCLC) based on its IC50 value andacridine orange and propidium iodide (AO/PI) staining for mode of cell death observation.Proliferation assay …

Sorption And Ion Exchange Behaviour Of Natural Zeolite Packing, Chandra Wahyu Purnomo, Bernice Lenora, Wiratni Budhijanto, Hirofumi Hinode

Makara Journal of Technology

It is well known that zeolite is an efficient metal ions adsorbent. The excess charge of the zeolite building blocks i.e. (AlO4)-5 and (SiO4)-4 creating a negative surface charge that attract metal cations. Beside the surface charge, zeolite also has three dimensional pore structure and reasonably large surface area which also can be used as adsorption sites. Ease of cation uptake make it suitable for many process with adsorption and desorption application. This study was conducted to observe the sorption and ion exchange behaviour of zeolite-betonite rings toward iron and cobalt cations. The results shows that the adsorption patterns follow …

Semicoupled Modeling Of Interaction Between Deformable Tires And Pavements, Jaime Hernandez, Imad L. Al-Qadi

Civil and Environmental Engineering Faculty Research and Publications

The interaction between deformable tires and pavements was studied using finite-element modeling and a semicoupled approach. Three finite-element models were used: (1) a hyperelastic tire rolling on an infinitely rigid surface; (2) a three-dimensional pavement model; and (3) a hyperelastic tire rolling on a deformable viscoelastic body. The tire and pavement models have been successfully compared with experimental measurements. Tire interaction with a rigid surface provided contact stresses to excite the pavement model, and results of the pavement model defined the boundary conditions of the tire rolling on the deformable body. After that, the pavement loaded with the contact stresses …

Correlating Strength And Stiffness Data Of The Pencel Pressuremeter And Triaxial Compression Tests In Florida Sands, Jacob William Jansen

Theses and Dissertations

The poorly graded sands found throughout Florida provide geotechnical engineers with a difficult challenge when performing testing samples in laboratory tests. These challenges have caused lab tests such as the triaxial compression test to be overlooked. Since geotechnical engineers estimate strength and stiffness parameters from basic field tests, they often produce overly conservative designs. Understanding how the automated in-situ PENCEL Pressuremeter (PPMT) test correlates with the triaxial compression test can reduce the time and costs associated with laboratory triaxial testing. Results from triaxial tests yield a Young’s Elastic Modulus, shear strength, and internal friction angle. Results from a PPMT test …

Encapsulation Process Of Propolis Extract By Casein Micelle Improves Sunscreen Activity, Muhamad Sahlan, Dara Dienayati, Darul Hamdi, Soraya Zahra, Heri Hermansyah, Malyn Chulasiri

Makara Journal of Technology

Propolis, a wax bee glue, have antioxidant activity and effective as broad spectrum UVB and UVA photoprotection sunscreens agent. To improve photoprotection activity in sunscreen cream, the propolis was encapsulated by casein micelle. The Indonesian propolis was extracted by ethanol and separated the wax by freeze precipitation. The extract was encapsulated by casein and reduced their size by ball mill homogenizer with the encapsulation efficiency about 80% and size of particles about 80 nm. The particles was applied in sunscreen cream, evaluate their stabillity and photoprotection activity Sun Protection Factor (SPF) spectrophotometer (Optometric 290s). The results shows that the selected …

Nano-Channels Early Formation Investigation On Stainless Steel 316ti After Immersion In Molten Pb-Bi, Abu Khalid Rivai, Mardiyanto Mardiyanto, Annette Heinzel

Makara Journal of Technology

Development of fuel cladding and structural materials in Pb-Bi environment, especially at high temperature, is a critical issue for the deployment of LFR (Lead alloy-cooled Fast Reactor) and ADS (Accelerator Driven Transmutation System). This is because of the corrosive characteristic of Pb-Bi to metals as constituent materials of fuel cladding and structural of the reactors. Corrosion test of a high-chromium austenitic stainless steel i.e. SS316Ti in molten Pb-Bi at 550 ºC has been carried out for about 300 hours continuously. The characterization using SEM-EDS (Scanning Electron Microscopy - Energy Dispersive X-ray Spectroscopy) showed that an iron oxide as the outer …

Synthesis Of Libob Fine Powder To Increase Solubility, Etty Marti Wigayati, Titik Lestariningsih, Christin Rina Ratri, Ibrahim Purawiardi, Bambang Prihandoko

Makara Journal of Technology

Lithium bis (oxalate) borate or LiBOB compound has captured interest of researchers, because it is potentially viable to be used as electrolyte salt in lithium-ion battery system. This compound is easy to synthesize and considered to be more environmentally friendly compared to conventional electrolyte salt because LiBOB does not contain halogen element. This research focused on the synthesis of LiBOB fine powder, which main purpose is improving LiBOB salt solubility in liquid electrolyte solution. This will aid the ion transfer between electrodes which in turn will increase the electrolyte performance. Solid state reaction was employed in this experiment. Synthesis of …

Influence Of Polyethylene Glycol (Peg) In Cmc-Nh4br Based Polymer Electrolytes: Conductivity And Electrical Study, Nur Khalidah Zainuddin, Ahmad Salihin Samsudin

Makara Journal of Technology

The present work was carried with new type and promising polymer electrolytes system by development of carboxyl methylcellulose (CMC) doped NH4Br and plasticized with polyethylene glycol (PEG). The sample was successfully prepared via solution casting with no separation phase and good mechanical properties. The electrical conductivity and thermal conductivity of CMC-NH4Br-PEG based PEs system have been measured by the electrical impedance spectroscopy method in the temperature range of 303–373 K. The highest ionic conductivity gained is 2.48 x 10-3 Scm-1 at ambient temperature for sample contain with 8 wt. % PEG. It can be concluded that the plasticized is accountable …

Purification Simulation With Vapor Permeation And Distillation-Adsorption In Bioethanol Plant, Misri Gozan, Mia Sari Setiawan, Kenny Lischer

Makara Journal of Technology

High purity of Bioethanol is required in biofuel mixing with gasoline (EXX). In bioethanol production line, the azeotropic property of ethanol-water becomes the barrier for purification process. This study examined two bioethanol separation processes by support of simulation tools, Superpro Designer 9.0 software. Ethanol purity and a low costeconomical process were the major considerations. Purification method of vapor permeation membrane technology was compared with distillation-adsorption method. Data from previous lab experiments and some literatures were used. The results showed that distillation-adsorption method is more economical compared to vapor permeation technology. Payback period of the simulation is 3.9 years and 4.3 …

Impact-Resistant Behavior Of Reinforced Concrete Bridge Columns, Chen Fang

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

The damage caused by a vehicle collision on a pier column can be catastrophic for the functionality of a bridge, even a total collapse of the bridge. ❖ A vehicle collision and a subsequent vehicle blast cause more damages on the bridge. ❖ Limited researches have been conducted to investigate the behavior of the bridge subjected to the combined effect of vehicle collision and blast. ❖ It is necessary to analyze the responses of the bridge under the vehicle collision and blast and provide some design suggestions to strengthen the bridge.

Conclusions ❖ The finite element models including column, pile …

Optimizing Steel Railway Truss Bridge Health Monitoring, Ahmed Rageh, Daniel Linzell

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Problems - Steel Railway Trusses • Aging • Large system – bridge AND railway • Labor intensive condition eval • Reported conditions: Stringer-to-floor beam connections [Haghani 2012] Stringer flange clip angle cracks [Haghani 2012] Unequal eyebars stress distribution [DelGrego 2008] Displaced eyebar pins [DelGrego 2008

Problems – Condition Evaluation • Visual inspection: Prescribed frequency Costly Subjected to human interpretation • Sensors: Focused on a single bridge Extensive array Costly

Influence Of Skew And Nonlinear Deck On Elastic Versus Inelastic Distribution Behavior And Ultimate Capacity Of Steel Girder Bridges, Fayaz Sofi, Joshua Steelman

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Research Objectives

• Assessment of alternative load distribution methodologies for potential discrepancies that arise when evaluating distribution behavior of skewed steel girder bridges.

• Investigate the influence of skew and material nonlinearities (concrete cracking and steel yielding) on

• Load distribution behavior (elastic versus inelastic).

• System capacities (yielding and ultimate).

Summary and Conclusions • Influence of skew was examined on load distribution behavior, and nonlinear system-based capacities (yielding and ultimate) of composite steel girder bridges in presence of full material nonlinearities. In addition, assessment of two general definitions (beam-line and response fraction approaches) for quantifying load distribution behavior was …

Design For An Aging Population, Trygve Faste, Kiersten Muenchinger

TREC Final Reports

Older Americans are increasing in numbers and addressing their needs through better public transportation design will improve their quality of life. This study sought to increase understanding of the obstacles faced by people with impairments in vision, hearing and/or mobility, which are common issues for older people, and generate physical product solutions. The research was conducted to conceptualize products, structures and services to reduce or eliminate these obstacles.

With a focus on the Eugene, OR, public bus system, elderly riders were surveyed and interviewed. Designers rode on buses noting what worked well and where problems arose. Five ride-along observations of …

Decentralized Wastewater Treatment Plant In Bangalore, India, Cameron Akhavan, Simon Barbe, Alejandro Fernandez Fernandez

Civil, Environmental and Sustainable Engineering Senior Theses

The Vrishabawathi River in Bangalore, India, has high levels of pollution due to untreated wastewater discharges from the city. The city requires significant expansion of its wastewater treatment infrastructure. Smaller-capacity plants spread throughout the city, known as decentralized treatment plants, provide an alternative to centralized treatment plants that can meet these demands. This project involved the design of one decentralized plant. This plant is located in the Kengeri district of the city, a mostly residential area in the outskirts of Bangalore. The designed treatment facility includes two primary clarifiers, two biotowers, and two secondary clarifiers. Plants like these can help …

Inclusion Of An Introduction To Infrastructure Course In A Civil And Environmental Engineering Curriculum, Esmaeili Behzad, Philip J. Parker, Steven D. Hart, Brooke K. Mayer, Led Klosky, Michael R. Penn

Civil and Environmental Engineering Faculty Research and Publications

Civil infrastructure refers to the built environment (sometimes referred to as public works) and consists of roads, bridges, buildings, dams, levees, drinking water treatment facilities, wastewater treatment facilities, power generation and transmission facilities, communications, solid waste facilities, hazardous waste facilities, and other sectors. Although there is a need to train engineers who have a holistic view of infrastructure, there is evidence that civil and environmental engineering (CEE) programs have not fully addressed this increasingly recognized need. One effective approach to address this educational gap is to incorporate a course related to infrastructure into the curriculum for first-year or second-year …