Feasibility Of Geothermal Energy Piles In New Orleans Alluvial Soils,
2020
University of New Orleans
Feasibility Of Geothermal Energy Piles In New Orleans Alluvial Soils, Patrick A. Thurmond
LSU New Orleans Theses and Dissertations
Geothermal energy piles offer the benefits of modifying existing construction practices to reduce costs associated with heating and cooling. A major obstacle today in effective utilization of these systems is a general lack of site-specific data on the thermal properties of subsoils. To maximize the potential efficiency of these systems, engineers require an understanding of the potential impact of this technology on existing foundation design methodology as well as a means for quantifying potential heat transfer through soil by determination of the soil’s thermal conductivity. This study examines the feasibility of energy piles with a focus on alluvial soils found …
The Impact Of Grinding Time On Properties Of Cement Mortar Incorporated High Volume Waste Paper Sludge Ash,
2020
Department of Civil Engineering, Liverpool John Moores University
The Impact Of Grinding Time On Properties Of Cement Mortar Incorporated High Volume Waste Paper Sludge Ash, Ali A. Shubbar, Monower Sadique, Mohammed S. Nasr, Zainab S. Al-Khafaji, Khalid S. Hashim
Karbala International Journal of Modern Science
Cement is considered a base material in preparing blending mixtures that applying in various projects in the civil engineering field. Nevertheless, the cement production process cause indubitable negative environmental influences such as emitting CO2. The production of cement produces around 7% of the global CO2 emissions. Thus, searching for alternate binders in building processes to minimise or substitute cement has been one of the social problems. A by-product or waste products are among the potential alternatives to the mentioned problem. The present investigation involves the consumption of paper sludge ash (PSA) waste as cement replacement to produce …
Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level,
2020
University of Texas at Tyler
Expanding The Concept Of Comprehensive Area Ratio Parameter To The South-Central States Towards Simplifying The Structural Evaluation Of Flexible Pavements At The Network Level, Nitish R. Bastola
Civil Engineering Theses
The surface deflection bowl data collected through Non-Destructive Testing (NDT) has been widely utilized by various Department of Transportation (DOTs) in the South-Central States and other places. The primary purpose of using deflection-based NDTs in network-level assessment is to identify a weak pavement section that requires further analysis at the project level. The falling weight deflectometer (FWD) test is one of the common NDT based tests utilized by highway agencies in assessing the performance of the flexible pavement. However, a robust method to evaluate pavement sections utilizing FWD data from all the sensors are seldom developed. There is always a …
Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils,
2020
University of Texas at Tyler
Laboratory Testing And Mechanistic Analysis Of Treated Subgrade Soils, Hari Kumar Reddy Yarrapureddi
Civil Engineering Theses
Calcium-based stabilizing agents such as cement and lime have been extensively used to improve the engineering properties of base and subgrade layers of pavement systems. Recently, polymers and chemical stabilizers have become popular due to cost efficiency, ease of application, and fast curing times. In this study, California Bearing Ratio (CBR) values of polymer and chemical treated soils were compared with the CBR values of soils treated with conventional stabilizers. Parametric sensitivity analyses was carried out on key parameters including the type of subgrade soil, stabilizing agent, stabilizing agent treatment levels, and moisture conditioning. Additionally, numerical analyses was performed to …
Housing Pre-Fabrication And Resource Optimization,
2020
Western Michigan University
Housing Pre-Fabrication And Resource Optimization, Emma Dubensky
Honors Theses
Enclosure during construction is often time-consuming, expensive, and at the mercy of the weather. By introducing methods for manufacturing prefabricated enclosure components such as wall panels and roof sections, the impact of the three major variables is reduced. Designs for trusses, roof sections, wall sections, and foundations were developed and selected using civil engineering principles; and manufacturing and logistical processes were optimized using engineering and project management skill sets. These multi-disciplinary efforts were combined to create an accessible and versatile set of designs and instructions that can improve the effectiveness of both a skilled and non-skilled volunteer workforce. By creating …
State Of The Art In Composition, Fabrication, Characterization, And Modeling Methods Of Cement-Based Thermoelectric Materials For Low-Temperature Applications,
2020
Purdue University
State Of The Art In Composition, Fabrication, Characterization, And Modeling Methods Of Cement-Based Thermoelectric Materials For Low-Temperature Applications, Xiaoli Liu, Ruchita Jani, Esther Orisakwee, Conrad Johnston, Piotr Chudzinski, Ming Qu, Brian Norton, Niall Holmes Dr., Jorge Kohanoff, Lorenzo Stella, Hongxi Yin, Kazuaki Yazawa
Articles
The worldwide energy crisis and environmental deterioration are probably humanity’s greatest challenges. Thermoelectricity, which allows for the mutual conversion between thermal and electrical energy, has become a promising technology to alleviate this challenge. Increasingly more research focuses on how to fabricate and apply thermoelectric materials for harvesting energy and regulating the indoor thermal environment. However, only a few studies have focused on cementitious materials with thermoelectric potential. Thermoelectric cement is a composite material in which particular additives can enhance the thermoelectric performance of ordinary cement. By potentially replacing traditional construction materials with thermoelectric cement in building applications, electricity could be …
Housing Prefabrication And Resource Optimization,
2020
Western Michigan University
Housing Prefabrication And Resource Optimization, Megan Scherpereel
Honors Theses
Enclosure during construction is often time-consuming, expensive, and at the mercy of the weather. By introducing methods for manufacturing prefabricated enclosure components such as wall panels and roof sections, the impact of the three major variables is reduced. Designs for trusses, roof sections, wall sections, and foundations were developed and selected using civil engineering principles; and manufacturing and logistical processes were optimized using engineering and project management skill sets. These multi-disciplinary efforts were combined to create an accessible and versatile set of designs and instructions that can improve the effectiveness of both a skilled and non-skilled volunteer workforce. By creating …
Loup Public Power District Fishing Pier & Parking Lot,
2020
University of Nebraska - Lincoln
Loup Public Power District Fishing Pier & Parking Lot, Tyler Ruwe
Honors Program: Senior Projects (Public)
This project was performed in fulfillment of the Civil Engineering Senior Design class (CIVE 489H). The goal of this project was to design an ADA compliant fishing pier and parking lot for the Loup Public Power District in Columbus, Nebraska. The fishing pier and parking lot will be located near the northeast corner of Lake North. A four-member team was formed to delegate the workload to accomplish this design project. I, Tyler Ruwe, served as the team’s project manager and structural engineering lead. Other disciplines of this design project included work involved in geotechnical, water resources, environmental, and transportation engineering. …
Bio-Binder—Innovative Asphalt Technology,
2020
Technological University Dublin
Bio-Binder—Innovative Asphalt Technology, Amir Tabakovic
Articles
The global road network spans 16.3 million km [1], of which 5 million km is in the EU. These road networks fulfil major economic and social goals by facilitating the movement of goods and people throughout the EU, and are therefore of the utmost importance to the economic and social life of the EU [2]. National governments invest heavily in their road networks, e.g., in 2014, EUR 53.33 billion was invested in the development and maintenance of the EU road network [3]. Each year, the world produces 1.6 trillion tonnes of asphalt [4], of which 218 million tonnes is produced …
Benefits Of Pre-Construction Analysis: Cet Senior Capstone Expands Understanding Of An Urban Refuge At Gallopnyc Sunrise Stables,
2020
CUNY New York City College of Technology.
Benefits Of Pre-Construction Analysis: Cet Senior Capstone Expands Understanding Of An Urban Refuge At Gallopnyc Sunrise Stables, Aalaa Mohammed
Publications and Research
For any construction project, there exists a phase of planning known as “pre-construction.” This initial phase of the project provides a definition of the project, identification of potential issues, planning and scheduling, scope, cost estimation, and analysis of needs for the job. My research analyzes a pre-construction case study conducted for Gallop NYC’s Stable in Howard Beach, Queens. The findings suggest that the practice of construction planning is effective in order to avoid delays in construction itself and ensure successful project completion. Supporting literature examines some of the best practices for pre-construction analysis. These include but are not limited to: …
Hydraulic And Mineralogical Characterization Of Organoclay Before And After Reaction With Non-Aqueous Phase Liquid (Napl),
2020
University of Nebraska-Lincoln
Hydraulic And Mineralogical Characterization Of Organoclay Before And After Reaction With Non-Aqueous Phase Liquid (Napl), Mostafa Afzalian
Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research
Sediment capping—a method used to stabilize and remediate contaminated subaqueous sediment in lakes or river shores by covering the contaminant with multiple layered materials— is a more effective, economic, and durable in situ treatment compared to ex situ methods such as dredging. The caps are typically composed of porous geomaterials such as gravels, sands, Reactive Core Mat (RCM), including reactive soils (e.g., organoclay) and geosynthetics (e.g., geotextiles). The designed caps are regarded as water-permeable so as not to disturb the sediment; however, the caps become unsaturated state because of trapped gas generated from the decomposition of organic matter. Most of …
Influence Of The Shaping Process On The Tensile Properties Of Steel Reinforcement Bars Carbon Steel Grades Bjtp24 And Bjts40,
2020
Department of Civil Engineering, Faculty of Engineering, Universitas Indonesia, Depok 16424, Indonesia
Influence Of The Shaping Process On The Tensile Properties Of Steel Reinforcement Bars Carbon Steel Grades Bjtp24 And Bjts40, Nuraziz Handika, Ridha Amalia Idhar, Jessica Sjah, Essy Arijoeni, Elly Tjahjono
Makara Journal of Technology
According to the current applicable national standard in Indonesia, i.e. SNI 07 2529 1991, in addition to the limitation on the loading rate, the steel bar must be reduced, formed, or lathed, as part of the shaping process of samples. This study determined and compared the effect of the shaping process on the yield strength, ultimate strength, and percent elongation by conducting tensile tests of steel bar grade BJTS40, i.e. deformed bar type of steel, and grade BJTP24, i.e., plain bar type of steel. Three diameters of the deformed bar (BJTS40) and one diameter of the plain bar (BJTP24) were …
A Density Functional Theory Study On Using Montmorillonite To Reduce Air Pollution,
2020
Nuclear Physics and Biophysics Research Group, Department of Physics, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Bandung 40132, Indonesia
A Density Functional Theory Study On Using Montmorillonite To Reduce Air Pollution, Triati Dewi Kencana Wungu, Meqorry Yusfi, Suprijadi Suprijadi
Makara Journal of Technology
In this study, density functional theory (DFT) method is used to investigate the possibility of using a smectite clay mineral called montmorillonite (MMT) in reducing heavy metals, such as Cd, through Cd adsorption. The mechanism of Cd adsorption in MMT is observed theoretically, and the tetrahedrally isomorphic substitution on the upper layer of MMT is considered to observe the role of Al and Fe in strengthening Cd adsorption. Two types of MMT are modeled in this study: Al-MMT and Fe-MMT. The Al-MMT means that Al substitutes one atom in the upper tetrahedral layer of MMT, while Fe-MMT means that Fe …
Ionic Conductiviy Of Alginate-Nh4cl Polymer Electrolyte,
2020
Ionic Materials Team, Faculty of Industrial Science & Technology, Universiti Malaysia, Pahang 26300, Malaysia
Ionic Conductiviy Of Alginate-Nh4cl Polymer Electrolyte, Nurhasniza Mamajan Khan, Noor Saadiah Mohd Ali, Ahmad Faizrin Ahmad Fuzlin, Ahmad Salihin Samsudin
Makara Journal of Technology
This study aims to produce a solid biopolymer electrolyte (SBE) by doping ammonium chloride (NH4Cl) into alginate. Solution casting was used to prepare the alginate–NH4Cl SBE system. Electrical impedance spectroscopy was performed to analyze the electrical properties of the SBE under the applied frequency range of 50 Hz–1 MHz. The incorporation of 8 wt.% NH4Cl enhances the ionic conductivity of the SBE up to 3.18 × 10-7 S/cm at ambient room temperature. Fourier transform infrared spectroscopy shows that complexation occurs between the hydroxyl (-OH), carboxylate (COO-) and ether linkage (C-O-C) functional groups due to the formation of inter- and intra-molecular …
Use Of Viscoplastic Damper For Improving The Resistance Of Steel Frames To Blast Loading,
2020
Faculty of Civil Engineering, Babol Noshirvani University of Technology, Babol 47148-71167, Iran
Use Of Viscoplastic Damper For Improving The Resistance Of Steel Frames To Blast Loading, Gholamreza Abdollahzadeh, Hadi Faghihmaleki, Hamed Hamidi Jamnani, Atefeh Ebrahimi Bardar
Makara Journal of Technology
In this paper, we evaluated the effect of viscoplastic dampers on the response of steel frames under blast loading. We used SAP2000 software and link elements to investigate the responses of nine-story steel frames with and without dampers. The proposed viscoplastic damper is a new type of viscous damper. The application of this damper is based on the availability of its constituent materials. The damper acts as a viscoelastic damper at low levels of vibration, but it acts as a combination of viscoelastic operator and metal-yielding device at extreme levels of vibration. With respect to the height of the structure, …
Influence Of Lithium Bromide On Electrical Properties In Bio-Based Polymer Electrolytes,
2020
Ionic Materials Team, Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang, Pahang 26300, Malaysia
Influence Of Lithium Bromide On Electrical Properties In Bio-Based Polymer Electrolytes, Ahmad Faizrin Fuzlin, Bouchta Sahraoui, Ahmad Salihin Samsudin
Makara Journal of Technology
This research presents the influence of lithium bromide (LiBr) on the electrical properties of alginate in bio-based polymer electrolytes (BBPEs) system. Bio-based alginate was prepared using the solution casting technique with various LiBr compositions. The ionic conductivity and electrical properties of the prepared BBPEs samples were studied using electrical impedance spectroscopy over a frequency range of 50 Hz–1 MHz. A maximum ionic conductivity of 7.46 × 10−5 S cm-1 was obtained for a sample containing 15 wt. % lithium bromide-doped alginate BBPEs at ambient temperature (303 K). The electrical analysis revealed that the most conductive sample based on alginate-LiBr BBPEs …
Mechanical Alloying-Assisted Coating Of Fe–Al Powders On Steel Substrate,
2020
Nano Center Indonesia, PUSPIPTEK, Banten 15314, Indonesia
Mechanical Alloying-Assisted Coating Of Fe–Al Powders On Steel Substrate, Alfian Noviyanto, Sri Harjanto, Wahyu Bambang Widayatno, Agus Sukarto Wismogroho, Muhamad Ikhlasul Amal, Nurul Taufiqu Rochman
Makara Journal of Technology
The coating layer of Fe–Al powders on the steel substrate was prepared by mechanical alloying at room temperature. Fe, Al, and the steel substrates were milled with high-energy ball milling for 32 h with a ball-to-powder ratio of 8 in an argon atmosphere to prevent oxidation during milling. Although mechanical alloying was performed for 32 h, no new phases were observed after mechanical alloying, as analyzed by X-ray diffraction. However, the crystallite size of the milled powders for 32 h decreased by factor two compared with the initial powders. Scanning electron micrographs showed that the coating layers formed >8 h …
Performance Of Free-Space Optical Communication Systems Using Optical Amplifiers Under Amplify-Forward And Amplify-Received Configurations,
2020
Informatics Engineering, Faculty of Information and Communications Technology, Universitas Nasional, Jakarta 12520, Indonesia
Performance Of Free-Space Optical Communication Systems Using Optical Amplifiers Under Amplify-Forward And Amplify-Received Configurations, Ucuk Darusalam, Arockia Bazil Raj, Fitri Yuli Zulkifli, Purnomo Sidi Priambodo, Eko Tjipto Rahardjo
Makara Journal of Technology
With the growth of digital technology in the stage of industrial revolution 4.0, the demand for broadcasting large amounts of information to last mile users has increased. Free-space optical (FSO) communication is one of the telecommunication platforms that has shown immense potential in meeting the demand for information broadcasting. In this work, the performance of FSO communication based on wavelength division multiplexing with a data rate of 80 Gbps is investigated through simulations. The configuration of optical amplifiers in the FSO system is set up on the basis of the amplify-forward and amplify-received configurations to expand the network. The investigation …
Iso 9001:2015 Risk-Based Thinking: A Framework Using Fuzzy-Support Vector Machine,
2020
Electronics Engineering Technology, Technological University of the Philippines, Manila 1000, Philippines
Iso 9001:2015 Risk-Based Thinking: A Framework Using Fuzzy-Support Vector Machine, Ralph Sherwin A. Corpuz
Makara Journal of Technology
Risk-based thinking (RBT) is one of the distinct new features of the International Organization for Standardization 9001:2015. Interestingly, the standard does not prescribe any tools. Hence, organizations are puzzled as to the extent of conformance. Some organizations have adopted formal tools. However, these tools seem insufficient in linking the standard into an evidence-based decision support system. To resolve gaps in RBT implementation, this paper proposes a framework based on fuzzy inference system (FIS) and support vector machine (SVM) to automate risk analysis and evaluation, proposal and verification of action plans, and prediction of the feasibility of risks and opportunities according …
Environmental Hygiene For Covid-19: It's All About The Mask,
2020
Missouri University of Science and Technology
Environmental Hygiene For Covid-19: It's All About The Mask, Daniel B. Oerther, Mona Shattell
Civil, Architectural and Environmental Engineering Faculty Research & Creative Works
No abstract provided.
