Automotive Engineering Commons^™

Exploring Factors Contributing To Injury Severity At Freeway Merging And Diverging Locations In Ohio, Worku Y. Mergia, Deogratias Eustace, Deo Chimba, Maher Butros Qumsiyeh

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Identifying factors that affect crash injury severity and understanding how these factors affect injury severity is critical in planning and implementing highway safety improvement programs. Factors such as driver-related, traffic-related, environment-related and geometric design-related were considered when developing statistical models to predict the effects of these factors on the severity of injuries sustained from motor vehicle crashes at merging and diverging locations. Police-reported crash data at selected freeway merging and diverging areas in the state of Ohio were used for the development of the models. A generalized ordinal logit model also known as partial proportional odds model was applied to …

Review: 'American Cars, 1973‐1980: Every Model, Year By Year', Jack O'Gorman

Roesch Library Faculty Publications

This title, part of an ongoing series, chronicles American cars made between 1973 and 1980. Entries include background on the nameplate, models available, cost, and measurements of the vehicle. Photos of the cars are shown by manufacturer and year, and the advertising slogans used to sell the cars are a nice touch to open each entry.Appendixes include minor makes and "replicars" (a copy of a vintage or classic automobile), option groups and packages, tire sizes, identification and recalls, and manufacturer logos. This work for American car enthusiasts may be better suited in the circulating collection than the reference collection and …

Impact-Acoustic Evaluation Method Of Internal Crack In Rubber Composite Structure, Qin Shen

All Dissertations

The main objective of this work is to investigate the impact acoustic method as a means of nondestructive testing (NDT) for internal cracks in a rubber composite structure, such as that found in a tire. As demonstrated in this dissertation, this approach is an effective and economical alternative to the current NDT methods for tires casing integrity inspection. There are two separate aspects of the impact acoustic signals considered in this work: the impact force signal and the resultant acoustic signal. First, a contact dynamics model is developed based on the Hertz’s impact theory and modified for rubber composite materials. …

Unmanned Ground Vehicle Navigation And Coverage Hole Patching In Wireless Sensor Networks, Guyu Zhang

Doctoral Dissertations

This dissertation presents a study of an Unmanned Ground Vehicle (UGV) navigation and coverage hole patching in coordinate-free and localization-free Wireless Sensor Networks (WSNs). Navigation and coverage maintenance are related problems since coverage hole patching requires effective navigation in the sensor network environment. A coordinate-free and localization-free WSN that is deployed in an ad-hoc fashion and does not assume the availability of GPS information is considered. The system considered is decentralized and can be self-organized in an event-driven manner where no central controller or global map is required.

A single-UGV, single-destination navigation problem is addressed first. The UGV is equipped …

Tdma Slot Reservation In Cluster-Based Vanets, Mohammad Salem Almalag

Computer Science Theses & Dissertations

Vehicular Ad Hoc Networks (VANETs) are a form of Mobile Ad Hoc Networks (MANETs) in which vehicles on the road form the nodes of the network. VANETs provide several services to enhance the safety and comfort of drivers and passengers. These services can be obtained by the wireless exchange of information among the vehicles driving on the road. In particular, the transmission of two different types of messages, safety/update and non-safety messages.

The transmission of safety/update message aims to inform the nearby vehicles about the sender's current status and/or a detected dangerous situation. This type of transmission is designed to …

Team Effectiveness And Project Management In A Student Team Environment, Rahul Girish Patel

All Graduate Theses, Dissertations, and Other Capstone Projects

The objective of this research study was to assess if students enrolled in MSU - Mankato's Automotive Engineering Technology (AET) program required a project management course. At present, a project management course is not included in the AET program. A survey instrument based on "The Team Effectiveness Critique" by Susan Trimble was developed to answer the research question. AET students enrolled in Senior Design courses were the main focus of this study. Survey results indicated that AET Senior Design students who had taken a project management course prior to a Senior Design course had good ratings in survey categories of …

Steam, Electricity & Gas : Historical Perspectives On What We Drive Today And Why, Michael Edward Flinton

Legacy Theses & Dissertations (2009 - 2024)

ABSTRACT

Indeterminate Masses, Elements And Models In Information Fusion, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

In this paper at the beginning, we make a short history of the logics, from the classical Boolean logic to the most general logic of today neutrosophic logic. We define the general logic space and give the definition of the neutrosophic logic. Then we introduce the indeterminate models in information fusion, which are due either to the existence of some indeterminate elements in the fusion space or to some indeterminate masses.

The best approach for dealing with such models is the neutrosophic logic, which is part of neutrosophy. Neutrosophic logic is connected with neutrosophic set and neutrosophic probability and statistics.

Mode And Implementation Of A Hybrid Control System For A 2-Mode Hybrid Electric Vehicle, Zhenhua Zhu

Graduate Theses, Dissertations, and Problem Reports (ETD)

Automotive transportation consumes more than 71% of the world's total petroleum energy. The vehicle will have to use less because it will take less than 30 years to consume the rest of the proven conventional oil reservoir if the fuel consumption keeps the current trend. One of the methods to improve the vehicle efficiency is to develop Hybrid Electric Vehicle (HEV). An HEV combines an internal combustion engine (ICE) and electric motor(s) powered by batteries or capacitors to achieve better fuel economy. Among the HEVs, 2-Mode HEV combines an ICE and two electric motors with two planetary gear sets and …

The Effects Of External Motivation And Real-Time Automated Feedback On Speeding Behavior In A Naturalistic Setting, Ian J. Reagan, James P. Bliss, Ron Van Houten, Bryan W. Hilton

Psychology Faculty Publications

Objective: In this field experiment, the authors tested an alerting system and a monetary incentive system with the objective of reducing speeding more than 5 mph faster than the posted speed limit.

Background: Speeding is a factor in a significant number of traffic fatalities. The systems tested in this project have been evaluated outside but not within the United States. These studies indicated that similar systems led to reductions in speeding.

Method: For this study, eight vehicles were instrumented such that vehicle speed and speed limits were linked in real time. A total of 50 participants drove assigned vehicles for …

Development Of A Supervisory Control Unit For A Series Plug-In Hybrid Electric Vehicle, Brian Neal Harries

Doctoral Dissertations and Master's Theses

A Series PHEV was chosen, as ERAU's entry into EcoCAR2 through a multidisciplinary architecture selection process. The series architecture was chosen for its mechanical feasibility, consumer acceptability and its performance on energy consumption simulations. The Series PHEV architecture was modeled using Matlab, Simulink, and dSPACE ASM tools, to create a plant model for controller development. A supervisory controller was developed to safely control the interactions between powertrain components. The supervisory control unit was tested using SIL and HIL methodologies. The supervisory controller was developed with an emphasis on fault detection and mitigation for safety critical systems. A power management control …

Modeling, Identification, Validation And Control Of A Hybrid Maglev Ball System, Ahmed Elhussein E. Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

In this thesis, the electrodynamics of a single axis hybrid electromagnetic suspension Maglev system was modeled and validated by applying it to a single axis hybrid maglev ball experiment. By exploring its linearized model, it was shown that the single axis hybrid Maglev ball has inherently unstable dynamics. Three control scenarios were explored based on the linearized model; (1) Proportional, Deferential (PD) control, (2) Proportional, Deferential, Integral (PID) and (3) PID controller with pre-filtering. This thesis has shown that a PID controller with a pre-filtering technique can stabilize such a system and provide a well-controlled response.

A parametric system identification …

The Engineering Process For The Design Of A Motorcycle Chassis And Suspension, Derek J. Noce

Doctoral Dissertations and Master's Theses

The thesis objective is to define and establish an engineering process for the design of a modern motorcycle chassis and suspension. The engineering process focuses on the interdisciplinary fields of engineering dealing with design and structural optimization. Specialized software, such as Motorcycle Kinematics, MATLAB, CATIA, HEEDS Professional, and NASTRAN are utilized. Motorcycle Kinematics is used to set up the preliminary motorcycle geometry, and MATLAB is a used to analyze the kinematics and stability of the motorcycle based on this geometry. CATIA (Computer Aided Three-Dimensional Interactive Application) is used to graphically illustrate the geometry of the motorcycle in three dimensional space. …

A Critical Review On Corrosion Of Compression Ignition (Ci) Engine Parts By Biodiesel And Biodiesel Blends And Its Inhibition, B. Singh, John Korstad, Y. C. Sharma

College of Science and Engineering Faculty Research and Scholarship

This paper reviews the effects of corrosion on the engine parts that come in contact with a newly developed biodiesel fuel and its petrodiesel blend. Copper, aluminum, copper alloys (bronze), and elastomers caused significant levels of corrosiveness in biodiesel and biodiesel blend as opposed to low corrosion with petrodiesel. Specimens of stainless steel showed significant resistance to corrosion in biodiesel samples as compared to copper, aluminum, and copper alloys, but the level of corrosion was still higher than that in petrodiesel. Common methods adopted for measurement of corrosion include weight loss through static emersion tests, and electrochemical techniques by electrochemical …

An Analysis Of Factors Affecting The Effective Use Of Knowledge Management In Counter Improvised Explosive Device (C-Ied) Operations, Umit Gencer, Rafael E. Landaeta, Resit Unal, C. Ariel Pinto, Gokay Sursal

Engineering Management & Systems Engineering Faculty Publications

Improvised Explosive Device (IED) is a weapon of choice and is likely to remain a major component of the Global War on Terrorism. It is critical that gaps in knowledge transfer are quickly addressed in order to more effectively equip personnel to counter IED (C-IED) threat. Therefore, the military must analyze the current Knowledge Management (KM) programs in C-IED arena in order to maximize transfer of knowledge derived from experience and skill to staffs and finally to commanders. This study investigates the factors that influence effective use of KM in C-IED operations in the military. The study suggests that effective …

Detailed Modeling Of Soot Size Distribution Evolution And Pollutant Formation Inside Aircraft And Diesel Engines, Chowdhury Golam Moniruzzaman

Legacy Theses & Dissertations (2009 - 2024)

Combustion emission of soot and pollutant gas species contributes to poor regional air quality near emission sources and to climate change. It is important to understand the formation mechanism and time evolution of these pollutants inside the combustion engine, through detailed modeling of combustion chemistry and microphysics as well as comparison with observation. In this thesis, two multi-zone gas parcel combustion engine models, one for aircraft engines and another for diesel engines, have been developed to study soot size distribution evolution and pollutant formation inside the engines as well as emissions. The models take into account size-resolved (sectional) soot aerosol …

Project-Risk Management And Decision Analysis In Maritime Maintenance And Repair, Michael C. Plumb, C. Ariel Pinto, Rafael Landaeta, Resit Unal, Thomas Murphy

Engineering Management & Systems Engineering Faculty Publications

The purpose of this paper is to provide insights regarding the implementation of using Project Risk Management (PRM) and Decision Analysis (DA) in managing projects for complex systems such as maritime vessels. The PRM approach apprehends many forms of risk both internal and external within a given project and assists the manager in determining the level of importance of each individual project phase and component to optimize project success. Ship Maintenance and Repair project decision-making requires that risk management and risk analysis techniques be applied in order to guide management in making better decisions to meet ship service life perspective. …

Limited Assessment Of A Selected Particulate Matter Sensor Technology In Emission Measurement Applications On Diesel Vehicles, Svetlana Korotkova Espinosa

Dissertations and Theses @ UNI

The study assessed the ability of a novel particle sensor to provide adequate evaluation of real-time emissions from modem diesel engines and estimate the effectiveness of emission control devices. Emission data were obtained from vehicles in real-world field conditions under various test cycles. The datasets were used to determine whether there is an association between particulate matter (PM) measurements produced by particle sensor and the PM measurements from reference instrument. Exploratory analysis was combined with statistical techniques to investigate suitability of particle sensor to adequately measure PM mass concentrations in exhaust gases of modem diesel vehicles. Results of the study …

Development Of A Modular Dual Engine Hybrid Electric Vehicle Simulation Model, Kenan Baltaci

Dissertations and Theses @ UNI

Depleting resources of fossil fuel, climate change impacts, high oil prices, and strict emission requirements are leading to the research on efficient, environmentally friendly, and lowered fossil fuel dependent solutions in the transportation field. While a number of studies used computer modeling and simulation tools to investigate hybrid electric vehicles (HEVs), very few attempted to model and simulate a dual-engine hybrid vehicle. Designing a vehicle engine to meet energy needs in the fully loaded condition is not an optimal solution for manufacturers and customers. The larger the engine, the higher the manufacturing costs for companies, and higher fuel consumption for …

Nonholonomic Feedback Control Among Moving Obstacles, Stephen Gregory Armstrong

Doctoral Dissertations and Master's Theses

A feedback controller is developed for navigating a nonholonomic vehicle in an area with multiple stationary and possibly moving obstacles. Among other applications the developed algorithms can be used for automatic parking of a passenger car in a parking lot with complex configuration or a ground robot in cluttered environment. Several approaches are explored which combine nonholonomic systems control based on sliding modes and potential field methods.