Construction Engineering Commons^™

Linking Effective Whole Life Cycle Cost Data To Parametric Building Information Models Using Bim Technologies, Dermot Kehily, Trevor Woods, Fiacra P. Mcdonnell

Conference papers

Abstract ̶ This paper demonstrates the capabilities of BIM (Building Information Modeling) in leveraging Whole Life Cycle Cost (WLCC) data requirements to perform WLCC calculations and produce WLLC estimates. The research determines the extent to which WLCC data, such as time, interest rates, escalation rates and real costs can be attached to parametric BIM data to be used effectively to create speedier and more accurate real-time WLLC analysis. Without incorporating WLCC data in the BIM, a complete picture of a construction project’s WLCC cannot be formed from the default outputs of the model. BIM 5D applications such as CostX utilise …

Bs News November/December

Building Services Engineering

No abstract provided.

Improving Project Performance Using Lean Construction In Egypt ., Marwa Gamal Swefie

Theses and Dissertations

There are numerous challenges and problems facing the construction industry in Egypt. The main criterion for success of any construction project is to deliver the project without time or cost overrun. Lean Construction is a new management technique that has been successfully implemented in many countries to increase the probability of a project success. This research examines the effectiveness of implementing lean thinking on the performance of Egyptian construction projects. First, the current appreciation and awareness of lean construction within the Egyptian construction industry is determined through an actual survey within one of the largest construction firms in Egypt. It …

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

An Analysis Of Safety Culture & Safety Training: Comparing The Impact Of Union, Non-Union, And Right To Work Construction Venues, Harry Miller Csp, Tara Hill, Kris Mason, John S. Gaal Edd

Online Journal for Workforce Education and Development

The construction industry is one of the most dangerous sectors of the US economy. As such, the safety attitudes and climate within small (residential) contracting firms may play a role in providing a safe culture and working environment. The intent of this practitioner-based research study is to compare and determine if there is a difference in safety practices—based on documented field inspections and their related original number of violations observed by OSHA—between union residential carpentry contractors in the St. Louis area and:

1) non-union residential carpentry contractors in the St. Louis area;

2) non-union residential carpentry contractors across Missouri; and …

Evaluation Of Phase Change Materials For Cooling In A Super-Insulated Passive House, Jeffrey Stephen Lauck

Dissertations and Theses

Due to factors such as rising energy costs, diminishing resources, and climate change, the demand for high performance buildings is on the rise. As a result, several new building standards have emerged including the Passive House Standard, a rigorous energy-use standard based on a super-insulated and very tightly sealed building envelope. The standard requires that that air infiltration is less than or equal to 0.6 air changes per hour at a 50 Pascal pressure difference, annual heating energy is less than or equal to 15kWh/m2, and total annual source energy is less than or equal to 120 kWh/m2. A common …

Ua3/9/2 2010-2022 Master Plan, Wku Planning, Design & Construction

WKU Administration Documents

WKU master plan map showing buildings needing renovation, proposed buildings, affiliated buildings and WKU property in Bowling Green, Kentucky.

Bs News September/October

Building Services Engineering

No abstract provided.

Predicting Building Energy Performance: Leveraging Bim Content For Energy Efficient Buildings, Eddie Villanueva Aquino

Master's Theses

Reducing and managing the environmental impacts of building structures has become a priority of building stakeholders and within the architecture, engineering and construction (AEC) community; although, conflicting approaches and methods to combat the issues are present. For example, green building standards are widespread throughout the world; however each one has its own characteristics and consequently its own specific requirements. While all have proven to be effective rating systems and have similar requirements, the distinguishing characteristic that separates them is their treatment of performance and prescriptive metrics. The feature they all severely lack or currently limit is the inclusion of strict …

Implementation Of Integrated Project Delivery On Department Of Navy Military Construction Projects, Christopher S. Lee

UNLV Theses, Dissertations, Professional Papers, and Capstones

The concept of the project delivery system refers to the overall processes by which a project is designed, constructed, and/or maintained. There are many different types of project delivery systems to fit particular situations involving the owner and his intended project. The project delivery system is what establishes the framework that enables a construction project to be developed and ultimately executed.

The construction industry has observed that projects (both private and public) frequently suffer from factors such as adversarial relationships, low roductivity, high inefficiency and rework, frequent contractual disputes concerning who was at fault, and lack of innovation. Not only …

Bs News July/August

Building Services Engineering

No abstract provided.

Bim Collaboration In Student Architectural Technologist Learning, Malachy Mathews

Articles

This paper is the result of a qualitative case study which investigated the influence of building information modelling (BIM) collaboration on the learning of student architectural technologists based around a studio group project. The purpose of the paper is to disseminate knowledge gained into a new learning environment facilitated by the collaborative properties of a BIM application. A qualitative case study approach has been used to undertake the examination of the learners’ experiences during the project. This approach allowed the author to map the complex interaction between the participants during the stages of the collaborative design project. The paper provides …

Seismic Performance Comparison Of A Fixed-Base Versus A Base-Isolated Office Building, Nicholas Reidar Marrs

Master's Theses

The topic of this thesis is base isolation. The purpose of this thesis is to offer a relative understanding of the seismic performance enhancements that a typical 12-story steel office building can achieve through the implementation of base isolation technology. To reach this understanding, the structures of a fixed-base office building and a base-isolated office building of similar size and layout are designed, their seismic performance is compared, and a cost-benefit analysis is completed. The base isolation system that is utilized is composed of Triple Friction Pendulum (TFP) bearings.

The work of this thesis is divided into four phases. First, …

Cal Poly Brocade Challenge 2013, Chandler Morehardt, Alexa Coburn, Juan Silva, Kerry Sun, Greg Wang, Raul Chagoya, Jd Torres

Architectural Engineering

No abstract provided.

Analyzing The Factors That Lead To Housing And Construction Cost Escalation: A Case Study Focused On Riyadh, Saudi Arabia, Abdulaziz Saleh Alfouzan

Masters Theses & Specialist Projects

Riyadh city suffers from high housing and construction costs, which have increased by more than 200% over the last 7 years. This problem led to a significant interest from the government and the citizens of the city in understanding the causes of housing and construction cost escalation and the best strategies to address this problem in the short and long-terms, in order to find solutions for affordable housing.

In response to the absence of research regarding this problem, the researcher has decided to conduct a scientific survey about the factors that might have led to this problem in Riyadh. While …

Precast/Prestressed Concrete Truss-Girder For Roof Applications, Peter S. Samir

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Steel trusses are the most popular system for supporting long span roofs in commercial buildings, such as warehouses and aircraft hangars. There are several advantages of steel trusses, such as lightweight, ease of handling and erection, and geometric flexibility. However, they have some drawbacks, such as high material and maintenance cost, and low fire resistance. In this paper, a precast concrete truss is proposed as an alternative to steel trusses for spans up to 160 ft. without intermediate supports. The proposed design is easy to produce and has lower construction and maintenance costs than steel trusses. The proposed design is …

Bs News May/June

Building Services Engineering

No abstract provided.

Vulnerability Of Progressive Collapse In Reinforced Concrete Flat-Plate Buildings, Jinrong Liu

College of Engineering: Graduate Celebration Programs

• Progressive collapse is the spread of initial local failure, causing partial or
  even total collapse of a building.
• Flat plate structure is widely used for office and residential buildings.
• There is a large inventory of older flat plate building without continuous slab bottom reinforcement through columns.
• Limited knowledge exists regarding the risk of disproportionate collapse in
  older flat-plates under sudden column removal during abnormal events.
• Reliable mechanical model is needed for structural evaluation.

Developing A Standard Approach To The Value Engineering Process For The Civil Engineering Industry: A Theoretical, Case Study And Industry Perspective., Charles Anthony Mitchell

Conference papers

The original Value Engineering process developed in North America in the late 1940‟s, was primarily based on functional analysis. However; the North American Value Engineering process was not adopted in Europe. Instead various mixed methods were assembled under the umbrella term of Value Management. Nowadays there is much debate about what Value Engineering is and how is it defined? This question arises in part due to there being no standard approach in Europe as a whole in undertaking ValueManagement or Value Engineering exercises.With this in mind, Masters level research was undertaken from three perspectives (theory, case study and industry). The …

Precast Concrete Insulated Wall Panel Corbels Without Thermal Bridging, Mohamed Elkady

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

The common practice in corbel design is to block out the insulation in order to provide a solid concrete area at the corbel location. This connection practice results in thermal bridging, which significantly reduces the energy performance of the panel. For example, the PCI Design Handbook indicates that the reduction in thermal resistance caused by a solid part with an area equal to 9% of the total panel surface area is as high as 42%. This paper presents a discussion of a new concept for corbel design of insulated wall panels with the thermal break totally preserved. Two different designs …