Construction Engineering Commons^™

Bs News September/October

Building Services Engineering

No abstract provided.

Commercial Construction Schedule Collaborators And Current Scheduling Practices, Evan D. Bingham, Jay P. Christofferson, Mark Hutchings

The Professional Constructor

Construction mangers use the project schedule to communicate aspects of construction timing critical to project success. These schedules may be created using the collaboration of multiple project stakeholders or be the creation of a single manager. The tools used to create and communicate the schedule could range from hand drawn to critical path computer software. Because these practices may vary from company to company, commercial construction mangers can benefit from an understanding of common scheduling practices in the industry. This paper is a report of findings for commercial contractors working in the western United States. Construction managers working for 23 …

Attraction And Retention Of Minority Managerial Employees At Electrical Contractors, Ben F. Bigelow, Anthony J. Perrenoud, Anusree Saseendran

The Professional Constructor

Diversity in the managerial workforce in construction is limited, with a shortage of talent in the industry and the demand projected to grow over the next ten years. The challenge of attracting and retaining managerial talent is exacerbated for trade contractors as they have historically promoted management from the trades. This study explored differences, based on ethnicity, when it comes to factors that attract and retain managerial talent in electrical construction. Data was collected through a nationwide survey of management employees of electrical contractors. It was found that while some factors were influential for all ethnic groups, certain factors became …

Building Information Model-Based Quantity Takeoff – Leadership Support And Training, Morgan Tagg, James P. Smith, Jay P. Christofferson, Kevin R. Miller

The Professional Constructor

Building Information Modeling (BIM) plays an important role in the modern construction industry. BIM models are tools that help stakeholders perform a variety of functions including communication, visualization, trade coordination, and clash detection. A less commonly utilized functionality of BIM that shows strong potential to improve efficiencies and reduce error is model-based quantity take off (QTO). The literature identifies eight challenges to implementing BIM QTO. This paper focuses on the leadership and training elements inherent to two of the identified challenges – 1) New skills and training, and 2) reluctance of employees to adopt. Through semi-structured interviews with estimators, preconstruction …

Effects Of Organizational Trust And Project Delivery Variables On Bim User Confidence, Jason D. Lucas, Saw Sri Neeharika Vijayarao

The Professional Constructor

The use of Building Information Models (BIM) for construction planning has increased in all areas except for automated processes such as quantity take-off. Many model users lack confidence that a model, typically created by a third party, has accurate enough information in it to rely on the data for planning the project. This research is looking at how factors of organization trust and variables related to project delivery can raise user confidence in these situations. Factors of organizational trust were identified through a literature review. Two surveys were utilized to identify which factors were significant in raising user confidence. Finally, …

Accuracy Of Drone Based Surveys To Measure Stockpile Volume, Joseph M. Burgett, Scott Shaffer, Eric Stuckey

The Professional Constructor

This paper outlines a two phase experiment evaluating the accuracy of volumetric calculations using a commercially available drone and structure-from-motion (SfM) software. In the first phase, a large cardboard pyramid with a known volume was used to simulate a stockpile. Using georeferenced images collected by a Phantom 4 Pro drone and the SfM software ContextCapture, the computed volumes ranged between 1.5% and 3.3% of the actual volume. In the second phase of the experiment, a photometric survey was created of a large SCDOT borrow pit. The volumetric calculations were computed using conventional survey practices and with drone collected images. There …

The Effect Of Season On Construction Accidents In Saudi Arabia, Abdurahman Ammar

Emirates Journal for Engineering Research

Construction workers are exposed to extreme conditions over a large portion of the work day during the different seasons of the year when working on construction sites. Some studies have discussed the effect of seasonal timing of work-related injuries and concluded that more injuries occur during the summer months [1]. Other studies concluded that accidents are more likely to occur during rainy seasons [2]. Construction accidents data from 2004 to 2011 were obtained from the General Organization for Social Insurance (GOSI). A two way ANOVA analysis showed that there was no significant difference among the years in terms of number …

Leadership Behaviour And Worker Performance In The Nigerian Construction Industry, Abiodun Kolawole Oyetunji, John Adebiyi, Nathaniel Ayinde Olatunde

The Journal of Values-Based Leadership

Leadership is a dynamic process in which an individual influence other to contribute to the achievement of an assigned task. This paper investigates leadership behaviour and its impact on construction workers’ performance in Lagos, Nigeria. Purposive sampling technique was adopted to select 50 site-supervisors and 250 construction-workers involved in simple construction works. An investigation was carried out using a questionnaire survey method. The leadership variables investigated were ranked, regressed and correlated to workers performance. From the primary data analysis, leadership behaviour exhibited by supervisors were found to influence the site workers commitment to achieving the goal of the construction projects. …

Bs News July/August

Building Services Engineering

No abstract provided.

Workforce Development Through Online Experiential Learning For Stem Education, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

The U.S. workforce is increasingly comprised of older adults, women, and minorities who lack basic skills and are unable to acquire these skills through traditional educational and training programs. New approaches are needed to provide effective training to the adult learner and flexible support for nontraditional students who must balance work-life demands with limited educational opportunities. Contextualized teaching and learning (CTL) is a form of experiential learning that blends both basic skills and occupational training together in environments that allow students to relate subject matter to real-world situations. Virtual CTL environments can be created to better engage students, provide immediate …

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Timber-Strong Design Build Senior Project, Corbin S. Morisada

Architectural Engineering

The 2019 Timber-Strong Design Build Competition was developed by the American Wood Council, Simpson Strong-Tie Company Inc, and APA - The Engineered Wood Association to cultivate timber design, building, and sustainability experience for students. Participating students gained exposure to performance analysis, construction management, building practices, and project bid preparation while practicing as a design construction firm. In the process of this hands-on experience, students were expected to procure all building materials and tools themselves.

The Timber Strong senior project consisted of participating in the Timber-Strong competition, then re-purposing the structure for use as a playhouse in a pre-school. The intent …

Bridge House Restoration, Adam Mcpherson Pruitt, Ben Christopher Sykes, Samantha Sophia Solow, Christopher Ryan Levy, Severin Bechtel Elste

Architectural Engineering

Bridge House was severely neglected for years since its creation. Our team’s primary objective was to rejuvenate the structure and once again make it a priority destination for the public when visiting the Experimental Structures Laboratory. With this goal in mind, we replaced the plywood barricades with guard railings designed and fabricated by the team to complement those installed on the structure by the previous group. With the elimination of the plywood barricades, the Bridge House could once again be a sense of pride in the rich historical landscape of our Cal Poly community.

In addition, our team hoped to …

Pedestrian Bridge In Tanzania, Maja Sagaser, Karina Rosales

Architectural Engineering

This senior project originated to address the need of the community of Same, Tanzania. There is a deep and wide ravine which floods, making the path many adults and children take to the Majevu Primary School increasingly difficult and dangerous. This report encapsulates all of the steps taken to complete an approved final design for a footbridge to be constructed over this ravine. It includes the project overview, the architectural and structural design process, as well as the important considerations. There are also structural drawings that include plans, elevations, and details.

Framing Exterior Partitions For The Great Northern Services Housing Project, Patrick Pierre Shami

Construction Management

In the wake of a fire in Weed, CA that destroyed 150 homes, Great Northern Services (GNS), a nonprofit organization, reached out to Cal-Poly San Luis Obispo about a service-learning opportunity. This opportunity involved designing a single-family home and prefabricating the exterior partitions in San Luis Obispo. In Fall 2017, interdisciplinary teams of students delivered design proposals in the Integrated Project Delivery studio. The selected design was then finalized into a permitted set of drawings, and planning for the prefabrication began. The extent of the prefabrication was limited to the framing and sheathing of the exterior walls. The length of …

Prefabrication Of Exterior Partitions For Great Northern Services, John Christofer Claudio Espino

Construction Management

In the wake of a fire in Weed, CA that destroyed 150 homes, a non-profit organization called Great Northern Services (GNS) reached out to Cal-Poly San Luis Obispo about a service-learning opportunity that involved designing a single-family home and pre fabricating the exterior partitions in San Luis Obispo. In Fall 2017, interdisciplinary teams of students delivered design proposals in the Integrated Project Delivery studio. The selected design was then finalized into a permitted set of drawings and planning for the prefabrication began. The extent of the prefabrication was limited to the framing and sheathing of the exterior walls. The length …

Inception Through Inspection: Quality Control In The Simspon Strong Tie Materials Demonstration Lab, Allyson G. Forster

Construction Management

The purpose of this senior project is to create a quality control program in the Simpson Strong Tie (SST) Materials Demonstration Lab using BIM 360. The goal of this program is to help streamline the building process of the six-foot by eight-foot tiny home in Residential Construction Management. The SST laboratory activities have been developed in the true spirit of “learn by doing” and serve as a way for Construction Management (CM) students to interact with the building process directly. Students in the CM department are taught that quality begins at the inception of a job and should be monitored …

Haiti Transitional Home: Solar Panel System Design, Kasey Riese Hetzel

Construction Management

Haiti is located in a region with optimal access to the sun’s rays, but not enough resources to make use of them. While the country is known for its limited access to electricity and unreliable power quality, it has the potential to become a renewable energy powerhouse. Providing a safe place for families to reunite under one roof, that runs solely on solar power is the ultimate goal of this project. Not only designing the most efficient system, but finding which products are available in country, and which products would be more cost effective to ship internationally was the intent …

Ciob Global Student Challenge – Evaluation Of Virtual And International Competitions Aimed At The Construction Management Curriculum, Nicklaus Bryce Wilcots

Construction Management

Each year the Chartered Institute of Building hosts a six-week virtual competition called the Global Student Challenge. Three Cal Poly Construction Management students and myself competed in this competition. This challenge was an international competition that gave students the ability to manage their own construction company. This competition is the gateway to enhancing higher-level education through academic competitions. Students competitions, such as the ASC competitions, have been shown to improve academic success as Cal Poly’s Learn by Doing methodology is utilized. However, the largest flaw with academic competitions is the negative impact on classes outside of construction management. The purpose …