Architectural Technology Commons^™

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West

Conference papers

As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

Increasing Efficiency In 5d Bim By Utilising ‘Bim Interoperability Tools – Classification Manager’ To Append Icms Cost Codes, Dermot Kehily, Charles Anthony Mitchell

Conference papers

Abstract ̶ This paper discusses Building Information Modelling (BIM), notably the 5th Dimension of BIM, which covers cost management functionality in the BIM workflow. The research proposes an efficient digitised workflow that can facilitate the appendage of an International Quantity Surveying (QS) Cost Code to a consistent parameter in the objects of the model. This paper firstly outlines how QSs are currently inserting ‘user defined’ information by adding their cost Work Breakdown Structure (WBS) to an existing parameter, such as the ‘keynote’ or ‘assembly code’. The QS also has the ability to create a QS specific parameter (QS IDentification), by …

Competence Of A Spray Passive Down-Draft Evaporative Cooling (Pdec) System For Space Cooling, Daeho Kang, Richard K. Strand

Publications and Research

A spray PDEC system has been relatively less considered than other passive cooling strategies as one of the viable low-energy solutions in the cooling of buildings while having a great potential in energy savings. This study is intended to evaluate the capability of a spray PDEC system for space cooling. It comprises four simulation scenarios to see the system response and influence of indoor thermal environment when a spray PDEC system is adopted as a primary cooling system in two different climates. The simulation results show that a spray PDEC system causes a substantial variation in the indoor thermal environment …

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …

Topology And Form Finding Via Genetic Algorithms, Michael Goldenberg, Nick Coburn

Architectural Engineering

The following presents an approach to early applications of the Galapagos program as a means to optimize structural forms. The process was conducted with Rhino’s Grasshopper program, the structural analysis plug-in, Karamba, and the genetic algorithm solver, Galapagos. This topological form finding process was based on flexible parameters that modified brace and column locations, and diaphragm size and positions.

This process worked by having Galapagos modify a parametric model which had initial randomly generated variables for the genomes. After structural analysis, Galapagos was tasked with changing the form in order to minimize overall displacement of the structure. Being an evolutionary …

Revision Of The Archicad Manual For Cm 115, Emma Wagner

Construction Management

Each CM 115: Fundamentals of Construction Management section contains a quarter long project, the goal of which is to familiarize the students with a modeling software. More so, the goal of the project is to introduce them to a set of construction documents- how to get started, what is included, what they need to pay attention to as a construction manager, and most importantly, to implement what they learn from their written coursework completed during class. This manual was written to help students complete this assignment to the best of their ability, producing a piece of work that shows they …

Documentation Of Concrete Slabs Prior To Pours, Peter D. Riley

Construction Management

Concrete slabs in multi-level commercial building projects contain many components that become no longer visible once concrete has been poured. As building designs advance and continue to locate components in concrete, it is important to document what these slabs contain in order to verify accurate craftsmanship and allow for improved future construction workflows and building modernizations. This paper explores current industry needs for proficient documentation as well as practices to achieve this. A case study was conducted, testing four devices that analyzed feasibility factors for realistic implementation by a contractor such as cost, interoperability, and level of skill required for …

The Hospitality Design Laboratory: Testing A Growing Global Resource For Architectural Planning Research In The Tourism/Resort Industry, Glenn Nowak

International Conference on Gambling & Risk Taking

The HD-Lab at UNLV is an experiment in merging academic research teams with industry leadership to address the ever-changing landscape of global tourism, gaming, and hospitality as it pertains to the built environment. This poster session seeks to share overviews of previous studies, lessons learned, and opportunities for future architectural research. Collaborations amongst diverse teams aim to foster interdisciplinary research and continued contributions to the intellectual capital of hospitality design in Las Vegas and around the world. The presentation is structured across six broad and intertwined areas of foci: 1. Integrated resorts’ future evolutions and innovations, 2. Tourism architecture’s advanced …

Incentivising Multidisciplinary Teams With New Methods Of Procurement Using Bim + Blockchain​, Alan O'Reilly, Malachy Mathews

Conference papers

This paper researches a potential method of incentivising AEC industry professionals to design to better than NZEB standards. Analysing the potential of a purposefully designed local microgrid storing excess energy generated by solar technologies embedded within the building envelope; the microgrid excess output is measured and recorded using a (Post Occupancy) “Blockchain” application and measured against the data provided at design stage on a (Predictive) “Blockchain” database. This paper researches how energy output predictions at design stage, by multidisciplinary teams, may be enhanced by BIM + Blockchain Technology. The paper researches the potential of a digital twin (predictive versus post …

Fortifying Lower Manhattan's Shoreline, Krystel Campuzano, Mathlyn Mckie

Publications and Research

Lower Manhattan comprises less than 1% of the entire city’s land area, but generates almost 10% of the city’s total economic output, as measured by Gross City Product, and is the location of over 10% of all New York City jobs. Workers in Lower Manhattan come from all parts of the city. The District’s growth is supported by excellent access to transit, with 19 out of 25 subway lines and 26 ferry lines passing through the District. Any climate impacts in the District will resonate across the city as a whole and beyond. Because Lower Manhattan is a critical economic, …

Resurrecting A Fallen Angel: Architecture Remediating Pollution In Mexico City, Karen Rios

Bachelor of Architecture Theses - 5th Year

Mexico City's population of over twenty-one million inhabitants makes it the second largest city in the world. Consequently, air pollution levels in the capital are outrageous.

The following proposal is not an attempt at fixing the city's pollution issues but, rather, presenting an innovative solution to be adopted throughout the city. The thesis aims at solving the contamination crisis' physical and psychological aspects.

That is, a combination of architectural intervention and community involvement will help slow down the rising pollution levels in a once beautiful city. Perhaps starting at a micro scale and spreading throughout the city.

Mixed Reality’S Ability To Craft And Establish An Experience Of Space, Corey Jones

Bachelor of Architecture Theses - 5th Year

Mixed Reality, when integrated into architecture, will enable open spaces and the perception of the built environment to change rapidly with little physical fabrication.

As architects, we design with a desired experience of space in mind and don’t typically design with a rapidly changing built environment to meet a fluctuating programmatic demand. Theater Program however, often requires such rapid changes to the perceived environment, that is the stage, and is an activator of social interaction based on a shared experience of the performances.

What would be the architectural implications if we were to integrate mixed reality as a factor of …

Idea, Form, Reality – The Implications Of Natural Ventilation Strategies On Public Buildings In Temperate Maritime Climates, Michael P.G. Haslam

Masters

Natural ventilation is one of the prime form givers in environmentally responsive architecture – in its detail and its architecturally charged form of stacks and voids. It facilitates our understanding of a response to natural systems – not just in how it responds visually to warm and cool air but also in the adaptive approach to thermal comfort. The purpose of this research is to investigate the impacts and implications of natural ventilation strategies for different typologies of public and commercial buildings. This is with the aim of attempting to define a vocabulary of ventilation techniques and details that are …

Body Positivity: A Case For Corporeal Form, Jose Sanchez

Renée Crown University Honors Thesis Projects - All

Born from architecture’s increasingly shattered conceptual foundations, the formal project of bodily objects presents an interesting case study into the emerging dialectics surrounding considerations of representation, technology, and affect. This thesis examines the genealogical origins of corporeal form in order to further understand the stake that bodies hold within the production and reception of architecture. By tracing the pedigree of corporeal form back to the two types of architectural signification that emerged after modernism, bodies can be validated as a project able to extend and advance architecture’s potential for individualized and collective engagement. By situating bodily objects within the histories …

Primitive Palms: A Density Study On The Impacts Of Harvesting Natural Materials For Construction Purposes On Sumak Allpa Of The Amazon Rainforest, Zachary Bull

Independent Study Project (ISP) Collection

In an effort to better understand how rural construction techniques affect a surrounding environment, this study combines a density test of the natural building materials used in the construction of a school on Sumak Allpa island of the Orellana Province in the Amazon basin of Ecuador. The focus of the study measures the density of the bamboo species Guadua angustifolia and the Panama hat plant Carludovica palmata on the island while noting a comprehensive compilation of the techniques and materials used in the building process. Using a mix of plots and transects, a comparison of harvested material to remaining material …