Architectural Engineering Commons^™

Prediction Of Stress Increase At Ultimate In Unbonded Tendons Using Sparse Principal Component Analysis, Eric Mckinney, Minwoo Chang, Marc Maguire, Yan Sun

Durham School of Architectural Engineering and Construction: Faculty Publications

While internal and external unbonded tendons are widely utilized in concrete structures, an analytical solution for the increase in unbonded tendon stress at ultimate strength, ∆f_ps, is challenging due to the lack of bond between strand and concrete. Moreover, most analysis methods do not provide high correlation due to the limited available test data. The aim of this paper is to use advanced statistical techniques to develop a solution to the unbonded strand stress increase problem, which phenomenological models by themselves have done poorly. In this paper, Principal Component Analysis (PCA), and Sparse Principal Component Analysis (SPCA) …

A Practitioner’S Guide To Small Unmanned Aerial Systems For Bridge Inspection, Sattar Dorafshan, Robert J. Thomas, Calvin Coopmans, Marc Maguire

Durham School of Architectural Engineering and Construction: Faculty Publications

Small unmanned aerial system(s) (sUAS) are rapidly emerging as a practical means of performing bridge inspections. Under the right condition, sUAS assisted inspections can be safer, faster, and less costly than manned inspections. Many Departments of Transportation in the United States are in the early stages of adopting this emerging technology. However, definitive guidelines for the selection of equipment for various types of bridge inspections or for the possible challenges during sUAS assisted inspections are absent. Given the large investments of time and capital associated with deploying a sUAS assisted bridge inspection program, a synthesis of authors experiences will be …

Hvac System Air Filter Diagnostics And Monitoring, Priotomo Abiprojo, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for monitoring a heating, ventilation, or air conditioning (HVAC) system of a building is provided. A monitoring server, located remotely from the building, receives operating parameter data from a monitoring device at the building that measures an operating parameter of the HVAC system. The monitoring server generates a plurality of data clusters from the operating parameter data, each data cluster corresponding to operating parameter data generated during steady-state operation of the HVAC system. The monitoring server calculates an average operating parameter value for each data cluster. The monitoring server calculates normalized operating parameter values based on …

Comparison Of Wind Farm Layout Optimization Results Using A Simple Wake Model And Gradient-Based Optimization To Large-Eddy Simulations, Jared J. Thomas, Jennifer Annoni, Paul Fleming, Andrew Ning

Faculty Publications

The models used during wind farm layout optimization use simplifying assumptions that can alter the design space. Some characteristics of the simple models may negatively influence the resulting layouts. In this paper, we perform wind farm layout optimization using a simple wake model and compare the resulting improvements to large-eddy simulation (LES) results to confirm that the layout was actually improved. We begin by describing the models used, including changes specific for use with gradient-based optimization. We then compare our models’ output to previously published model and LES results. Using the models described, we performed gradient-based wind farm layout optimization …

Best Practices For Wake Model And Optimization Algorithm Selection In Wind Farm Layout Optimization, Nicholas F. Baker, Andrew P.J. Stanley, Jared J. Thomas, Andrew Ning, Katherine Dykes

Faculty Publications

This paper presents the results of two case studies regarding the wind farm layout optimization problem. We asked members of the computational optimization and wind communities to take part in the studies that we designed. Nine individuals participated. Case study 1 considered variations in optimization strategies for a given simple Gaussian wake model. Participants were provided with a wake model that outputs annual energy production (AEP) for an input set of wind turbine locations. Participants used an optimization method of their choosing to find an optimal wind farm layout. Case study 2 looked at trade-offs in performance resulting from variation …

Atomistic Simulations Of Nanoindentation Response Of Irradiation Defects In Iron, M. Mustafa Azeem, Qingyu Wang, Muhammad Zubair

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Radiation response of a material is a consequence of defects' evolution in any radiation damage event. The radiation-induced defects can significantly alter the mechanical properties of a material. Radiation damage initiates from incident neutron by bombardment on solid material causing production and evolution of Frenkel defects. Since voids are formed due to aggregation of a large number of vacancies that cause dimensional changes and hence irradiation-induced swelling. In order to characterize the effect of irradiation defects, we have performed molecular dynamics (MD) simulations to investigate nanoindentation response of point defects and voids in Fe and their effects on mechanical parameters. …

Epics Gaqt: Nandi Clean Kitchen Study, Yichen Fan

Engagement & Service-Learning Summit

No abstract provided.

Solar & Rain Catching Canopy "Urban Oasis 2", Afolabi Ibitoye, Cheriyah Wilmot, Alexander Aptekar, Grzegorz Kosieradzki, Kaiyrgul Sultanova, Jude Vallon

Publications and Research

The accumulation of water runoff during rain storms is a major problem in New York City’s combination water systems, forcing water treatment plants to release untreated excess water. To avoid overfilling of the sewer system by this grey water, pocket parks and gardens will be used to absorb the excess rainfall. We will be harnessing nature’s resources with current technologies such as: solar panels combined with rain catching canopies, to beautify the environment, educate the public about sustainability, stimulate growth to local businesses through increased foot traffic and bringing social awareness on environmental issues.

The canopies are designed to collect …

Data Driven Approach To Thermal Comfort Model Design, Mostafa Rafaiejokandan

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Apart from the dominant environmental factors such as relative humidity, radiant, and ambient temperatures, studies have confirmed that thermal comfort significantly depends on internal personal parameters such as metabolic rate, age, and health status. This study reviews the sensitivity of the Predicted Mean Vote (PMV) thermal comfort model relative to its environmental and personal parameters of a group of people in a space. PMV model equations adapted in ASHRAE Standard 55–Thermal Environmental Conditions for Human Occupancy, are used in this investigation to conduct a parametric study by generating and analyzing multi-dimensional comfort zone plots. It has been found that personal …

Clt Shearwall Dovetail Connection, Alexander Eduardo Esser, August Messano

Architectural Engineering

As cross-laminated timber has become an increasingly popular construction material, its use as a shear wall element has also demanded attention. Primary obstructions to the use of CLT shear walls have been the lack of an economic connection type that does not compromise the structural integrity and has the robustness that CLT shear wall panels deserve. Dovetail connections provide a great option for the connection of CLT shear walls. With more experimentation, the optimal dovetail geometry can be further developed. The small-scale testing done in conjunction with this report proved that very deep pins and tails will result in bearing …

Assessment Of Small-Scale Anisotropy In Stably Stratified Turbulent Flows Using Direct Numerical Simulations, Amrapalli Garanaik, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the validity of the widely used Kolmogorov hypothesis of local isotropy of dissipative scales in stably stratified turbulent flows is investigated using high-resolution direct numerical simulations. Departure from isotropy is investigated for the first time in terms of the turbulent Froude number defined as Fr = ϵ/(NEk), where N is the buoyancy frequency, Ek is the turbulent kinetic energy, and ϵ is the rate of dissipation of turbulent kinetic energy. It is shown that for both ϵ and the rate of scalar (density) dissipation, ϵρ, the small-scale statistics are nearly isotropic in the weakly stratified turbulent regime …

Evaluation Of Hospital Soundscapes To Improve Patient And Staff Experience, Jay Bliefnick

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Hospital soundscapes can be difficult environments to assess acoustically due to the continuous activity within units. Routinely, patients perceive these soundscapes poorly when rating their hospital experience on HCAHPS (Hospital Consumer Assessment of Healthcare Providers and Systems) surveys administered after discharge. In addition, hospital staff can be negatively impacted by the acoustical environments in which they work, affecting both performance and job satisfaction. This doctoral research addressed these issues across three phases by collecting acoustical measurements within three individual hospitals, comparing results with provided patient and staff survey information, and conducting laboratory tests of hospital noise perception. In the first …

An Investigation Of Sustainability Issue For Building Construction In North Cyprus, Hasan Samih Kalwry M.Sc., Halil Zafer Alibaba Associate Professor

Journal of Environmental Sustainability

The action of construction it is perceived to have a significant influence on the environmental assessment. In spite of the confession that environmental issues are significant in the construction field, and is slow to alteration the conventional way to combine environmental issue as part of the decision process. With increased information and awareness about these influence, among these sustainable building construction and material issues. In this article was began with investigate these issues in the North Cyprus, a questionnaire survey was conducted to investigate the scale of awareness, learning and implementation of sustainability in practices between architect’s perception and how …

Social Sustainability: The Assessment Of Neighbourhood Parks Live Ability In Sharjah City, Rana Helmy A. Elthabwabta

Architectural Engineering Theses

This research aims to assess neighbourhood social sustainability and live ability by investigating the ways in which users perceive neighbourhood spatial design and context. The research applied the social sustainability model to assess and question neighbourhood park live ability in Sharjah City.

Following a qualitative case study approach, the research operationalized social sustainability principles through several tools: survey, field observations and mapping. The conducted analysis was based on a compilation of coded data from the survey consistent with the applied principles of social sustainability.

The research findings confirm variables related to neighbourhood parks spatial context design and people perception. Thus …

Tanzanian Cement Block, Emmanuel Castano-Bonilla, Leah Holleran, Kristy Sanchez

Architectural Engineering

The construction plans for a polytechnic college are being developed in the town of Same, Tanzania, Africa. This project is sponsored by the Mbesese Initiative for Sustainable Design (MISD), a non-profit that has partnered with design firms such as ARUP and KLA architects to complete the work. Considering that the site is located in rural Tanzania, material availability is limited. A local block maker produces a mechanically pressed brick that consists solely of sand, cement and water. The bricks are unconventional when compared to those made in the United States. The purpose of this study is to understand the block …

Kind Gestures: Longtime Aci Members Shape The Career Of Younger Generations, Anahid A. Behrouzi

Architectural Engineering

In this article, an Assistant Professor at California Polytechnic State University describes how her involvement with ACI has helped her to embark on projects that, as a young faculty member, she could have never envisioned. She also tells of her first ACI convention in Spring 2013, her first interaction with ACI Committee 133, Disaster Reconnaissance, in 2014, and using the ACI 318 Building Code in the classroom.

The Bridge Newsletter Winter 2018, Missouri University Of Science And Technology

The Bridge Newsletter

-Pouring the cornerstone for the ACML
-Showalter selected as Kiewit Faculty Scholar
-Ma tests a low-cost method of strengthening concrete

Full Proceedings, 2018, Jianshun Zhang

International Building Physics Conference 2018

Full conference proceedings for the 2018 International Building Physics Association Conference hosted at Syracuse University.

Coir Fiber Reinforced Concrete, Jose De La Serna, Moses Karakouzian

AANAPISI Poster Presentations

This poster exhibits the testing and research done on general Portland Cement Concrete with the addition of coir (coconut) fibers as reinforcement. Using the fundamental constituents of cement (water, cement, fine and coarse aggregate) and processed coir fiber, concrete specimens were batched to test for compressive and flexural strengths (per appropriate ASTM standards). Cylindrical and rectangular beam specimens were subjected to loadings until failure occurred. The capacity and modes of failures of the specimens were observed. It was determined that:

• The addition of processed coir fibers decreases the overall strength of general Portland Cement Concrete. • The tested concrete’s …

The Evaluation Of Current Wall-To-Roof Anchorage Force Provisions For Single-Story Concrete And Masonry Buildings With Lightweight Flexible Diaphragms, John Lawson, Maria Koliou, Andre Filiatrault, Dominic Kelly

Architectural Engineering

Along the seismically active west coast of the United States (US), heavy concrete and masonry walled buildings with lightweight wood or steel flexible roof diaphragms are commonplace and have grown in size over the years. The current force levels found in ASCE’s Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE 7-16) for designing the out-of-plane wall anchorage system in these buildings is the result from a series of California earthquakes, causing a series of structural failures and subsequently revisions to the Uniform Building Code (UBC). This trial-and-error approach is the basis for current wall anchorage code …