Physical Sciences and Mathematics Commons^™

An Investigation Of Poly(N-Isopropylacrylamide) For Applications With Microfluidic Paper-Based Analytical Devices, Haydn Thomas Mitchell

Master's Theses

N,N′-methylenebisacrylamide-crosslinked poly(N-isopropylacrylamide), also known as P(NIPAM), was developed as a fluid delivery system for use with microfluidic paper-based analytical devices (microPADs). MicroPADs are postage-stamp-sized devices made out of paper that can be used as platforms for low-cost, simple-to-use point-of-care diagnostic assays. P(NIPAM) is a thermally responsive polymer that absorbs aqueous solutions at room temperature and will expel the solutions to microPADs when heated. The fluid delivery characteristics of P(NIPAM) were assessed, and P(NIPAM) was able to deliver multiple solutions to microPADs in specific sequences or simultaneously in a laminar-flow configuration. P(NIPAM) was then shown to be suitable …

Improving Hybrid Solar Cells: Overcoming Charge Extraction Issues In Bulk Mixtures Of Polythiophenes And Zinc Oxide Nanostructures, Grant T. Olson

Master's Theses

Organic photovoltaics (OPVs) have received a great deal of focus in recent years as a possible alternative to expensive silicon based solar technology. Current challenges for organic photovoltaics are centered around improving their lifetimes and increasing their power conversion efficiencies. One approach to improving the lifetime of such devices has been the inclusion of inorganic metal oxide layers, but interaction between the metal oxides and common conjugated polymers is not favorable. Here we present two methods by which the interactions between polythiophenes and nanostructured ZnO can be made to be more favorable. Using the first method, direct side on attachment …

Formulation Development Of A Polymer-Drug Matrix With A Controlled Release Profile For The Treatment Of Glaucoma, Eric W. Tsoi

Master's Theses

Glaucoma is the leading cause of blindness in the United States accounting for 9-12% of all cases of blindness. Currently, the front line treatment for glaucoma are prostaglandins that may have to be taken up to several times a day. Even with proper treatment, roughly 11% of the patients using the treatment are non-compliant and lose their vision. In this project, ForSight Laboratories has developed a pharmaceutical drug delivering implant with the capability of sustaining long-term release of a prostaglandin as a new way to treat the condition. This project reports the product development of a polymer drug matrix with …

Phase Behavior And Rheology Of Latex, Thickener, Surfactant Mixtures And Liquid Crystal Based Compositions For Printing High-Efficiency Flexible Electronics, Franceska Anna Santos

Master's Theses

This project consists of two parts. One area of focus in the first part is understanding the interactions between a non-ionic, block copolymer type dispersant and hydrophobically-modified, ethoxylated urethane (HEUR) associative thickeners in water. The dispersant was mixed at various concentrations (0-2% by weight) with HEUR thickeners at 1% by weight concentration in the aqueous medium. This study is an integral part of our attempts to determine mechanisms of viscosity drop when colorant dispersions are added to latex tint base formulations thickened with associative thickeners. One of the HEUR thickeners is a product that has been available for over three …

Nanoparticles And Polymer Crystallization Kinetics In Hybrid Electronic Devices, Taylor William Wagner

Master's Theses

Conjugated semi-conducting polymers have become well known for their potential applications in hybrid electronic devices like solar cells, LEDs, and organic displays. These hybrid devices also contain inorganic nanoparticles, which complement the polymer when they are combined into the same layer. Control over the conformation and crystallinity of the polymer is critical for device performance, yet not much is known about the effect that these nanoparticles have on the polymer. Here, zinc oxide nanowire was surface modified with mono-substituted-carboxylic acid tetraphenylporphyrin and dodecanethiol, and introduced to poly(3-hexyl thiophene) in solution. The electron transfer, kinetics, and thermodynamics of this system were …

Morphology And Conformation Of Polythiophene Derivatives In Anisotropic Core-Shell Nanocomposites And Solution, Neil Redeker

Master's Theses

Conjugated semiconducting polymers have garnered substantial interest in recent years due to the potential for use in various applications, particularly in the field of electronic devices such as photovoltaic cells and light emitting diodes. Conjugated polymers offer numerous advantages in these applications, including low cost and high flexibility, but electronic devices based on these materials are currently limited by poor performance. Because of these limitations, increased focus has been placed on improving conjugated polymers for use in commercially viable products. Here, a novel core shell hybrid nanocomposite based on anisotropic zinc oxide nanowires and a side-chain functionalized polythiophene is reported. …

Use Of Thermodynamic Models For Optimizing Fuel Treatment Processes, Shawn Pj Kirby, Andrew Guenthner

STAR Program Research Presentations

Dyes are often added to fuels for tax purposes, but they cause degradation of the fuels. It would be advantageous to remove the dyes prior to their use in critical aerospace applications. Current technologies vary in the efficiency with which they can remove unwanted dyes from fuel sources. We have used Hansen Solubility Parameters to develop an “ideal solvent” that can be used to extract these dyes from fuel. This will also be applied to removal of sulfur compounds from fuels. Sulfur compounds in fuels create sulfates during combustion, which in turn react with water to make sulfuric acid. Sulfuric …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

Experimenting With Polymer Blend Solar Cells And Active Layer Thickness, Ryan Blumenthal

Physics

Bulk heterojunction organic photovoltaics utilize the electrical characteristics of semi-conductive polymers. These solution processable materials are beneficial because of their low material cost, light weight, and simple fabrication requirements. Our devices employ multiple photoactive polymers, P3HT and PCPDTBT, to absorb photons over a wide spectral range. We optimized various device characteristics including thickness and thermal anneal usage to reach a power conversion efficiency of 3.0% in AM1.5 sunlight. Device performance degrades over time due to atmospheric water and oxygen, prompting us to investigate device packaging to extend cell lifetime for additional testing.

The Effects Of Color Concentrates On The Rheology Of Tint Bases, Doug James Herrick

Master's Theses

ABSTRACT

THE EFFECTS OF COLOR CONCENTRATES ON THE RHEOLOGY OF TINT BASES

Douglas James Herrick

Waterborne coatings are formulated with a number of different ingredients; water, latex polymers, pigments, surfactants, dispersants, defoamers, biocides, coalescing aids, and rheology modifiers or thickeners. Rheology modifiers are necessary in order to improve the physical properties of the coating before, during, and after application to a substrate. There are two kinds of rheology modifiers used in waterborne coatings; associative thickeners and non-associative thickeners. Coatings formulated with associative thickeners are quite sensitive to coating variations; the slightest change in the formulation has profound effects on the …

Controlling Nanoparticle Dispersion For Nanoscopic Self-Assembly, Nathan S. Starkweather

Master's Theses

Nanotechnology is the manipulation of matter and devices on the nanometer scale. Below the critical dimension length of 100nm, materials begin to display vastly different properties than their macro- or micro- scale counterparts. The exotic properties of nanomaterials may trigger the start of a new technological revolution, similar to the electronics revolution of the late 20^th century. Current applications of nanotechnology primarily make use of nanoparticles in bulk, often being made into composites or mixtures. While these materials have fantastic properties, organization of nano and microstructures of nanoparticles may allow the development of novel devices with many unique properties. …

Anti-Corrosion Performance Of Primer And Top Coat Formulations For Metal Substrates, Laural Elizabeth Hargrove

Master's Theses

This project involved the improvement of several properties of the current “universal” primer coating sold by Kelly-Moore Paint Company. This formulation is an all purpose primer used both for interior and exterior applications. However, its corrosion resistance has room for improvement. The addition of sodium nitrite, an aminocarboxylate salt, and a zinc phosphate-based additive were all tested as corrosion inhibitors. In addition, during the project the coating binder was changed to improve adhesion. After a systematic experimental program, a new “universal” primer with increased corrosion resistance and adhesion was formulated.

A direct to metal top coat formulation sold by Kelly-Moore …

Development Of A Quantitative High Throughput Method For The Early Detection Of Corrosion On Coated Aluminum, Jeffrey Clayton Foster

Master's Theses

Eight fluorescent indicators were evaluated for their ability to detect the corrosion of aluminum metal substrates. The fluorophore Rhodamine-salicylaldehyde (RSA) was selected as a candidate for further study based on its ability to bind and detect aluminum ions at low concentrations, its selectivity for aluminum ions, its long-term stability, its solubility in our solvent-based epoxy formulation, and its compatibility with our testing method.

A recent publication suggested that an alternative method of fluorescence activation was possible—an acid-promoted ring opening that occurred in the absence of metal ions. To prove the capability of RSA to bind aluminum ions, thorough ¹H …

The Development Of Transparent, Processable, Thermally-Responsive Coatings, Christopher David Roland

Master's Theses

Polymer matrices are commonly used as guest-host systems for organic chromophores for use in non-linear optical materials. The chromophores must be aligned or poled in an electric field in order to impart anisotropy and non-linear activity to the material. This poling process raises several issues, the two largest being the eventual relaxation of the chromophores back into random orientations due to brownian motion, and high molecular weight polymer matrices limiting chromophore mobility during poling. The prevention of this relaxation process is an area of significant interest, especially in applications that require long term coating stability and activity. In this study, …

Responsive Materials Via Diels-Alder Chemistry, Gregory Alan Strange

Master's Theses

The corrosion of infrastructure imposes a significant monetary cost, and at times human cost, upon society. Methods to improve corrosion resistance of materials are described herein which utilize the reversibility of the Diels-Alder reaction to impart thermal responsiveness upon materials. Such stimuli responsiveness can potentially play a role in self healing properties which lead to reduced cracking and thus increased corrosion protection.

Reversible Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates. Hydrophobic dieneophiles were prepared and attached to glass slides and capillaries to yield a nonwetting surface. Thermal treatment of the surfaces cleaved the Diels-Alder linkage, …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

Adhesion And Durability Of Coatings On Polypropylene Exterior Sidings, Logan Riekio Stark

Master's Theses

Plastics have become a universal material for use in a myriad of commercial and consumer products. One such product, exterior siding, is the focus of this project. Although siding products were originally made from wood, vinyl siding, which offered superior performance, was introduced in the 1950’s. More recently, polypropylene (PP) siding has been introduced; PP provides a stronger product, which allows for deeper patterns and better edge detailing. PP siding, compared to traditional wood siding, doesn’t warp, crack, or degrade as easily with extended exposure to the elements, and is cheaper to maintain. However, even plastic siding must be coated. …

Effects Of Ambient Gases On Icf Target Capsules, Bryan Chambers, Steve Letts, Michael Stadermann

STAR Program Research Presentations

We researched how the chemical and physical properties of a plasma polymer fuel capsule change as they are exposed to ambient gases. The fuel capsules contain the deuterium fuel inside them, they serve as the outer shell for the fuel and act as a ablator for the process. If they are reactive or diffusive with the atmosphere this can change their mass and effect the outcome of the fusion shots performed at the National Ignition Facility where High Powered Lasers are incident upon a gold hohlraum containing a capsule. We discovered that nitrogen and water vapor diffuse into the material …

Artificial Muscle Project: Process Development Of Polydimethyl Siloxane Thin Films For Use In Dielectric Electroactive Polymer Artificial Muscle Actuators, Vincent J. Gayotin, Richard W. Morrison, Paul A. Preisser

Materials Engineering

An artificial muscle design was created founded on the principles of a dielectric electroactive polymer (DEAP), which is fundamentally similar to a capacitor. A polydimethyl siloxane (PDMS)-based elastomer, Sylgard 184 from Dow Corning, was chosen for the design and spun coat onto polystyrene (PS) Petri dishes at varying speeds to create a thin film, using speeds of 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm, and 6000 rpm. The film thicknesses were measured optically through use of a microscope with coupled computer imaging software to generate a characteristic curve of film thickness to spin speed, achieving a minimum film thickness …

The Effects Of Cure Schedule On Properties Of Glass-Fiber Reinforced Epoxy Matrix Composites, Trevor J. Lee

Materials Engineering

Two different two-component resin systems were cured, via Differential Scanning Calorimetry, for the times recommended by their respective manufacturers. The resin cure schedules were designed to simulate typical and attainable processing conditions; they were cured at 120°F, 140°F, and 160°F, and in-mold post-cured at 200°F, 230°F, and 260°F. The resulting scans were then compared to a baseline cure for each resin system, consisting of two heating-cooling cycles at a constant rate of temperature change. These baseline cures were then used to determine the percent cure of each sample and the shift in glass transition temperature between the baseline cure and …

Development And Extrapolation Of An Undergraduate Laboratory Experiment To An Elastomeric Spinal Muscular Atrophy Brace, Richard Sterling Brose

Master's Theses

Ever since the advent of polymer science, polyurethanes have played a huge role in the industrial world. They have been used in endless applications from furniture padding to aircraft coatings, to binders for insensitive munitions. It is therefore important that the chemistry of polyurethanes is well understood as well as the ability to draw relationships between the raw materials selected and the end-use properties of the polymer. Because of the multitude of practical applications, the development of an undergraduate polymer chemistry laboratory focused on polyurethane elastomers is developed and described herein. Polymer chemistry students are exposed to hydroxyterminated polybutadiene (HTPB) …

Synthesis And Characterization Of Linear And Branched Polylactic Acid For Use In Food Packaging Applications, Kyle C. Bentz

Master's Theses

Polylactic acid (PLA) resins of various molecular weights and molecular weight distributions were synthesized. Linear, narrow molecular weight distribution (MWD) PLA resins were synthesized, as well as resins containing both high molecular weight branched structures and low molecular weight chains and oligomers. Narrow MWD resins were synthesized for use as adhesives for corrugated paperboard and broad MWD resins were synthesized for use as a waterborne coating. PLA resins were dispersed for use as a waterborne coating. Success has been made at forming films utilizing various plasticizers and surfactants as well as polyvinyl alcohol as dispersing agents. A cold dispersion procedure …

Part A: The Use Of Nonionic Associative Polymers For The Thickening And Emulsifying Of Personal Care Products/ Part B: The Synthesis Of A Manganese Sod Mimetic For Reactive Coatings, Mallory Lynn Mcmahon

Master's Theses

Part A

The use of nonionic associative thickeners was proposed for personal care applications. Various limitations of current rheology modifiers used in personal care were discussed. Nonionic associative polymers were examined as both thickeners and emulsifiers. The structure/property relationship for nonionic polymers and their ability to thicken and emulsify were fully examined. Results showed an increase in thickening efficiency for nonionic associative polymers with higher log(P) (partition coefficient) values. This was due to the formation of smaller aggregates and increased bridging between aggregates. The connection between oil polarity, log(P) of the associative polymer, and emulsion stability showed no relationship however; …

The Preparation Of Functional Surfaces, Philip Thomas Dirlam

Master's Theses

Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates in reversible manner. Glass slides and capillaries were functionalized with hydrophobic dieneophiles resulting in a non-wetting surface. A retro Diels-Alder reaction facilitated by the thermal treatment of the surface’s function to cleave the hydrophobic dieneophile and resulted in the fabrication of a hydrophilic surface. Contact angle (CA) measurements were used as preliminary measurements for monitoring the changes in surface energy exhibited during the initial hydrophobic state (CA - 70±3°), after attachment of the dieneophile creating a hydrophobic state (CA - 101±9°) followed by reestablishment of the hydrophilic state …

Evaluation Of Stain Blocking Primer Coatings With Low Volatile Organic Compound (Voc) Content And Effects Of Drying Conditions On The Properties Of Water Reducible Coatings For Polypropylene, Megan Alexandra Hart

Master's Theses

The California Air Resources Board (CARB) plans to reduce the volatile organic compound (VOC) limit of specialty primers, sealers, and undercoaters (SPSU), also referred to as stain blocking primers, from 350 g/L to 100 g/L in January of 2012. These coatings are primarily used as stain blocking primers over a variety of substrates, such as wood and drywall. Currently the stain blocking primers that are considered most effective are solvent based primers that contain VOC levels much higher than 100 g/L. The goal of this study is to determine if primers on the market today with a VOC content of …