Operations Research, Systems Engineering and Industrial Engineering Commons^™

Freight Sequencing To Improve Hub Operations In The Less-Than-Truckload Freight Transportation Industry, Xiangshang Tong, Kimberly Ellis, Amy Brown Greer

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In less-than-truckload freight transportation, hub operations affect the service levels that carriers are able to provide their customers. This paper focuses on improving the efficiency of hub operations by reducing freight handling time and cost. Specifically, the freight sequencing problem (FSP) is investigated to determine the freight unloading and loading sequence that minimizes the time for dock workers to transfer shipments from origin trailers to destination trailers. The FSP is modeled as a Rural Postman Problem (RPP) and three algorithms are compared: trailer-at-atime, nearest neighbor, and balance-and-connect. Using five industrial data sets, the results demonstrate the effectiveness, advantages, and disadvantages …

Distribution Planning Considering Warehousing Decisions, Pratik J. Parikh, Xinhui Zhang, Bhanuteja Sainathuni

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Modern supply chains heavily depend on warehouses for rapidly fulfilling customer demands through retail, web-based, and catalogue channels. The traditional approach that considers warehouses as cost-centers has affected the profitability of numerous supply chains. A lack of synchronization between procurement and allocation decisions causes warehouses to scramble for resources during peak times and be faced with under-utilized resources during drought times. Warehouses, however, have emerged as service-centers and it is imperative that warehousing decisions be an integral part of supply chain decisions. In this paper we propose a mixed-integer programming model to integrate warehousing decisions with those of inventory and …

Blocking Effects On Performance Of Warehouse Systems With Automonous Vehicles, Ananth Krishnamurthy, Sunderesh Heragu, Charles Malmborg

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Distribution centers are under increasing pressure to adopt material handling systems that offer greater flexibility to improve cycle time and throughput capacity in the transfer of unit loads in their high density storage areas. Autonomous Vehicles-based Storage and Retrieval Systems (AVS/RS), have been shown to hold significant promise in this context. In these systems, loads are transferred by autonomous vehicles. Vehicles support horizontal load movement along aisles and cross-aisles within a tier, and lifts support vertical movement between tiers. Existing research in AVS/RS, do not explicitly account for the potential blocking of vehicles and lifts while they are processing transactions. …

Designing Automated Warehouses By Minimising Investment Cost Using Genetic Algorithms, Tone Lerher, Iztok Potrc, Matjaz Sraml

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

The successful performance of the automated storage and retrieval systems is dependent upon the appropriate design and optimization process. In the present work a comprehensive model of designing automated storage and retrieval system for the single- and multi-aisle systems is presented. Because of the required conditions that the automated storage and retrieval systems should be technically highly efficient and that it should be designed on reasonable expenses, the objective function represents minimum total cost. The objective function combines elements of layout, time-dependent part, the initial investment and the operational costs. Due to the nonlinear, multi-variable and discrete shape of the …

Towards A Physical Internet: The Impact On Logistics Facilities And Material Handling Systems Design And Innovation, Benoit Montreuil, Russell D. Meller, Eric Ballot

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Aiming for a radical sustainability improvement, the Physical Internet has the potential of revolutionizing the fields of material handling, logistics, transportation and facilities design. It exploits the enabling concept of standardized, modular and smart containers as well as the universal interconnectivity of logistics networks and services. Its underlying paradigm shift creates a tremendous breakthrough innovation opportunity for the material handling and facility logistics community in terms of equipment, systems and facility design and operation. This paper provides a primer overview of a key subset of the physical elements serving as the foundation of the Physical Internet infrastructure, classified in three …

A Multiobjective Genetic Algorithm For Fuzzy Time Windows Vehicle Routing Problem, Hannaneh Rashidi-Bajgan, Taravatsadat Nehzati

Hannaneh Rashidi-Bajgan

Vehicle routing problem (VRP) is a well-known combinatorial optimization problem, holds a central place in logistics management. In the business, transportation, time windows are not always strictly complied and the deviation of service time from specific time window determines the customer’s satisfaction level. The purpose of this paper is to pay about restriction on uploading/delivering time when time constraints are not certain. Therefore this study applies fuzzy membership functions to characterize the service level issues associated with time window violations in VRP with two goals so that minimize the travel cost and maximize the supplier’s service level. In facing to …

A Predictive Game Theoretic Model To Assess Us - Russian Response To An Islamic Safe-Haven In The Caucasus Region, Christopher Wayne Hartline

Computational Modeling & Simulation Engineering Theses & Dissertations

The thesis examines possible US and Russian policy decisions following the establishment of an Islamist safe-haven in Chechnya. Conflicting national policies affect the possibility of a negotiated settlement. Domestic and international political considerations constrain the decision-making of the two nations. The author applies game theory to examine the sequential decision-making of the two nations. The extensive form model draws outcome payoff values from a bounded uniform distribution. This approach naturally models uncertainty; and, it allows repeated probabilistic instantiations of the model. These instantiations produce a range of solutions. The most likely outcome was a negotiated settlement, generally following a tit-for-tat …

The Influence Of Network Factors On Network Centric Operations, Mehmet Fidanci

Engineering Management & Systems Engineering Theses & Dissertations

As Information Age changes the lifestyle of all humankinds, it also changes the way how to defense and secure the borders are secured and defended. The Information Age is about information superiority. It evolves the command and control concept, proactively, to optimize the size of the units and their connections within a combat force for effective mission accomplishment. The biggest issue is how big a unit will be and how they will arrange and connect it to the command and control structure in order for the unit to be effective on the battlefield. While some arrangements connect to each other …

Irrigation Leak Detection: Using Flow Rate Sensors To Detect Breaks In An Irrigation System, Adam Openshaw, Kalvin Vu

Computer Engineering

This report details the exploration and invention of a mechanism that can detect breaks in an irrigation system. With the ultimate goal of conserving water, we have designed an inexpensive, self sustaining flow rate monitor that can be used to identify anomalies in an irrigation system and wirelessly communicate the status of the system to a base station. Our implementation can also determine the direction of the anomaly based on the nature of the anomaly itself. This means that multiple monitors can be used to pinpoint the location of a break within the system in addition to merely detecting its …

Cable Time Estimation Database, Joshua L. Okerman

Industrial and Manufacturing Engineering

The use of time standards are the basis for a high efficiency system in the manufacturing environment. This project will investigate the process followed to design and develop a database used to calculate accurate cable assembly time standards used for scheduling at General Atomics. This project will then justify the use of the Cable Time Estimation Database, through an economic analysis compared to the current methods applied.

Police Operations Simulation, Robert Mcgee

Industrial and Manufacturing Engineering

In this report, the author explains the process of creating the Police Operations Simulation, shows step-by-step how it works, and statistically analyzes the results from SLOPD’s own proposed and current schedules. The data-gathering from the department and the simulation itself will receive the bulk of the coverage in this report, followed by sample results from SLOPD and a business plan for future sale to other departments.

Using the given numbers, it appears that the proposed schedule will result in significantly improved coverage for the city of San Luis Obispo. While any increase in the number officers on patrol tends to …

Preference Driven University Course Scheduling System, Heather A. Bellardo

Master's Theses

University course planning and scheduling is the process of determining what courses to offer, how many sections are needed, determining the best term to offer each section, assigning a faculty member to instruct each section, and scheduling each section to a timeslot to avoid conflicts. The result of this task has an impact on every student and faculty member in the department. The process is typically broken down into three major phases: course offering planning, faculty assignment to planned course sections, and course scheduling into timeslots.

This thesis looks at each of these phases for the Industrial and Manufacturing department …

An Active Study Of A Roller Coaster Project In Asia., Robert Leamon Bridges

Electronic Theses and Dissertations

A roller coaster manufacturer became aware that improperly heat treated track couplings were sent to a construction site for assembly. Concerns were that suspect couplings might not meet the engineering specifications and could be vulnerable to sudden failure. A testing company in Oak Ridge, TN that specializes in in-situ and laboratory mechanical testing was contacted by the manufacturer for help in this endeavor. The construction company elected to enlist a local testing firm to perform field tests on the components instead of the company in Oak Ridge. The test methods used are incapable of providing quantitative results that could be …

A Novel Approach In Determining Points Of Interactive Transportations In The Firm, Zeinab Barati, Hannaneh Rashidi-Bajgan, Elham Esmaili

Hannaneh Rashidi-Bajgan

Partitioning is the most vital element in designing of a firm layout. Today modern working environments are intended to more use of less space which could increase more interactions between related departments. Although progress communications network has reduced the need for physical transportation but the tangible connections between different parts of a firm seems essential still. The firm is willing to reduce transfers to the minimum possible in order to prevent the vain crowd and time stuck. The purpose of this paper is to use a new approach of decision making in the location and layout of firm’s partitions. With …

A Madm Method For Office˗ Job Assignment Problem, Elham Esmaili, Hannaneh Rashidi-Bajgan, Zeinab Barati

Hannaneh Rashidi-Bajgan

There are different kinds of jobs in any organization; some of them have more traffic to one another, in the other words there are communicative rates between these office jobs. In this paper we want to develop an approach of analytical hierarchy process (ANP) so that enable us in assigning jobs to suitable office rooms. We suppose that we know distances between places and could predict the amount of flow movements between theses jobs and would like to minimize the distance×flow.

Coping With The Curse Of Dimensionality By Combining Linear Programming And Reinforcement Learning, Scott H. Burton

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Reinforcement learning techniques offer a very powerful method of finding solutions in unpredictable problem environments where human supervision is not possible. However, in many real world situations, the state space needed to represent the solutions becomes so large that using these methods becomes infeasible. Often the vast majority of these states are not valuable in finding the optimal solution. This work introduces a novel method of using linear programming to identify and represent the small area of the state space that is most likely to lead to a near-optimal solution, significantly reducing the memory requirements and time needed to arrive …

Maintenance Optimization For Substations With Aging Equipment, Haifeng Ge

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Today’s electric utilities are confronted with a myriad of challenges that include aging infrastructure, enhanced expectation of reliability, reduced cost, and coping effectively with uncertainties and changing regulation requirements. Utilities rely on Asset Management programs to manage inspections and maintenance activities in order to control equipment conditions. However, development of strategies to make sound decisions in order to effectively improve equipment and system reliability while meeting constraints such as a maintenance budget is a challenge.

The primary objective of this dissertation is to develop models and algorithms to study the impact of maintenance toward equipment/system reliability and economic cost, and …

A Decision Making Construct For Complex Situations, Van Edward Brewer

Engineering Management & Systems Engineering Theses & Dissertations

The uncertainty inherently associated with complexity challenges decision-making processes, indicating a need for a construct for decision making in complex situations. A review of the literature on systems, complexity, and paradigms indicates that such a construct must be internally consistent with well-defined philosophical foundations and further that systems and complexity (as used in complex situations) are not necessarily internally consistent with traditional philosophical foundations. Therefore, a decision making construct for complex situations requires research into different foundations. This research addresses these gaps, deriving axiological and methodological components based on a set of principles consistent with the ontology and epistemology of …

Senior Center Network Redesign Under Demand Uncertainty, Osman Ozaltin, Michael P. Johnson Jr., Andrew Schaefer

Michael P. Johnson

Senior centers off#11;er a variety of services to facilitate independent living of older adults. In the U.S., increasing suburbanization and aging of suburban residents necessitate reconfiguring senior services. We propose a two-echelon network of senior centers across large study areas and formulate a stochastic facility location/allocation model with mixed-integer recourse. We apply our model to Allegheny County, Pennsylvania, which has one of the oldest population in the U.S. Our model shows that a two-echelon network design is appropriate for increasing the occupancy of senior centers as community focal points while maintaining customized and accessible programming in small neighborhood areas.

Uncertainty Quantification Of Multi-Component Isotope-Separation Cascade Model, Khoi D. Tran

Theses and Dissertations

Monte Carlo uncertainty quantification (UQ) capability has been added to a code for modeling multi-component steady-state isotope-separation enrichment cascades to characterize the propagation of uncertainties in input data that define the cascade and the feed. Random samples of error for every computational input are drawn from its individual uncertainty distribution and added to the inputs, creating a set of enrichment cascade problems with perturbed inputs. The set of problems is solved using the verified code. The cascade outputs are then characterized using the empirical cumulative distribution. The uncertainty output data are analyzed to gain new insights into the behaviors of …

Nato Human View Architecture And Human Networks, Holly A. H. Handley, Nancy P. Houston

Engineering Management & Systems Engineering Faculty Publications

The NATO Human View is a system architectural viewpoint that focuses on the human as part of a system. Its purpose is to capture the human requirements and to inform on how the human impacts the system design. The viewpoint contains seven static models that include different aspects of the human element, such as roles, tasks, constraints, training and metrics. It also includes a Human Dynamics component to perform simulations of the human system under design. One of the static models, termed Human Networks, focuses on the human-to-human communication patterns that occur as a result of ad hoc or deliberate …

Electric Power Market Modeling With Multi-Agent Reinforcement Learning, Nathanael K. Miksis

Masters Theses 1911 - February 2014

Agent-based modeling (ABM) is a relatively new tool for use in electric power market research. At heart are software agents representing real-world stakeholders in the industry: utilities, power producers, system operators, and regulators. Agents interact in an environment modeled after the real-world market and underlying physical infrastructure of modern power systems. Robust simulation laboratories will allow interested parties to stress test regulatory changes with agents motivated and able to exploit any weaknesses, before making these changes in the real world. Eventually ABM may help develop better understandings of electric market economic dynamics, clarifying both delineations and practical implications of market …

Alleviation Of Spindle Transfer, Blake Ochs, Whitney Bone

Industrial and Manufacturing Engineering

Haas Automation, Inc. is one of the largest CNC machine tool builders in the world. They produce an assortment of machines that come in many different sizes, however, all machines have in common the central tool that allows them to perform their surfacing and bore functions, the spindle. As with the machines themselves, the spindles can also range in size depending on the type of machine they are going into. These spindles are assembled step by step and as components are added to them, several models become so heavy that it is not feasible to have operators lift them by …

Layout And Procedure Re-Design Of Dcpp Receiving Warehouse, Nicole Elizabeth Riegel

Industrial and Manufacturing Engineering

The receiving warehouse at Diablo Canyon Power Plant, owned by Pacific Gas and Electric, serves as a place to recognize the receiving of items into an ERP system, repackage and label items for long-term storage, and organize items for delivery inside the secured area. The warehouse managers would like to redesign the layout and procedures of the warehouse. Currently items are not received, scanned, or shipped in a timely manner. The flow of people and items in the receiving and shipping area is chaotic and space is limited especially during plant outages. The objective of this project is to: • …

Environmental Savings Tracking System For Cisco Systems, Inc., Lauren J. Herrera

Industrial and Manufacturing Engineering

This paper illustrates the research, methodology and design used to create an environmental savings tracking system, also known as the Green Dashboard, for Cisco Systems Inc.’s Green Initiatives Group to quantify and capture an annualized summary of savings from projects initiated within its Customer Value Chain Management Organization. It articulately describes the

methodology behind the selection of metrics and the design of the process required to collect and track these quantitative direct savings. As well as describes the benefits associated with implementing this system, such as shifting Cisco towards more sustainable products and increased customer satisfaction and investor relations by …

Non-Profit Management System For Friends Of The Elephant Seal, Matthew Justus, Robert Macasi, Jeff Zinn

Industrial and Manufacturing Engineering

Friends of the Elephant Seal (FES) are a non-profit organization based in San Simeon, California. Their current method of tracking and reporting information is inefficient. A project was proposed to develop a new information management system for FES, install it at their office and provide training including a user manual. The project was divided into three parts: Database Design and Implementation; User Interface Design and Ergonomics; and User Manual & Help System.

The objective of the project was to design a user-friendly interface specifically for the FES worker that allowed for easy access to data entry functions, reporting functions and …

Plug-And-Work Material Handling Systems, Kai Furmans, Frank Schonung, Kevin R. Gue

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

One disadvantage of automated material handling systems is their relative Inflexibility: once racks are installed and conveyors are laid, making even mi-nor changes to a system can be cumbersome and expensive. However, recent progress in the capabilities and cost of basic system components, such as controllers, drives, and sensors, has made possible a new class of material handling systems having a much higher degree of flexibility. We propose underlying de- sign principles for such systems and describe several prototype plug-and-work" systems, which feature decentralized control and ease of reconfiguration.

Optimizing The Rearrangement Process In A Dedicated Warehouse, Hector J. Carlo, German E. Giraldo

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

Determining the optimal storage assignment for products in a dedicated warehouse has been addressed extensively in the Facility Logistics literature. However, the process of implementing a particular storage assignment given the current location of products has not received much attention in the existing literature. Typically, warehouses use downtime or overtime to remove products from their current location and move them to the suggested location. This work presents the Rearrange-While-Working (RWW) policy to optimize the process of rearranging a dedicated warehouse. The RWW policy seeks to relocate products in a warehouse from the initial arrangement to the optimal arrangement while serving …

A New Milp Approach For The Facility Layout Design Problem With Rectangular And L/T Shaped Departments, Yossi Bukchin, Michal Tzur

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In this paper we propose a new approach for the facility layout problem (FLP) and suggest new mixed-integer linear programming (MILP) formulations. The proposed approach considers simultaneously the location of the departments within the facility and the internal arrangement of the machines. Two models are suggested, where the first addresses the rectangular department case and the second allows nonrectangular departments defined by an L/T shape. New regularity constraints are developed to avoid irregular department shapes.

The Human-Centric Warehouse, Kevin R. Gue

11th IMHRC Proceedings (Milwaukee, Wisconsin. USA – 2010)

In theory and in practice, the objective of warehouse design has long been to meet operational requirements of throughput and service performance at minimum cost. A natural product of this “bottom line” approach has been warehouse buildings and operations ill-suited to the humans who spend their working lives interacting with them. We offer an explanation for the current approach, and argue that a new approach— a new paradigm —is needed. We then describe a comprehensive approach to warehouse design that includes human well-being as a primary goal.