Operations Research, Systems Engineering and Industrial Engineering Commons^™

Use Of Polymer Rapid Tools As Functional Injection Mold Tooling, Sean Derrick

Masters Theses

Conventional tool making for injection molded plastics is expensive, time consuming, and generates a great deal of waste. Presently, industry is waiting for what is commonly referred to as Rapid Tooling (RT). The greatest opportunity for RT implementation would be the use of Additively Manufacturing (AM) technology. Specifically, AM techniques which use a high strength polymer resin substrate.

The following research is an initial feasibility study to determine if Polymer Rapid Tools (PRTs) could be used as functional injection mold tooling. The objective of the research was to determine if a PRT could mold a variety of features to a …

Single-Depot Vehicle Routing Problem For Home Delivery Of Pharmaceutical Products, Kimberly Starr Harms

Masters Theses

Some retail pharmacies offer home delivery services to establish a competitive advantage in the growing healthcare market. The handling of orders for home delivery includes several internal and external processing and transportation activities. In this work, models were developed for use in a pharmacy delivery system to assist personnel in their daily activities. This work includes standard operating procedures for picking, packing and loading of delivery orders and the assignment and routing of vehicles to deliver customer orders. Results from simulated delivery areas identified interesting tradeoffs when comparing densely populated areas to sparsely populated areas. In addition, recommendations for order …

Using Real-Time Location Systems & Simulation Modeling To Improve Healthcare, Colby Thomas Mattie

Masters Theses

In the healthcare industry, facility managers often find themselves with limited resources, lack of timely data, and unexpected crises that they have to respond too. Their options are based on hastily made assumptions and a limited understanding of all implications of the problems at hand. This scenario has become a concerning issue for the healthcare industry where problems can arise at any time and every minute counts. The healthcare industry is also littered with wasteful processes and regulations that increase the cost for physicians and facility operators and decrease the overall care for the patients. This is very evident in …

A Multi-Echelon Inventory System With Supplier Selection And Order Allocation Under Stochastic Demand, Cong Guo

Masters Theses

This article addresses the development of an integrated supplier selection and inventory control problems in supply chain management by developing a mathematical model for a multi-echelon system. In particular, a buyer firm that consists of one warehouse and N identical retailers wants to procure a type of product from a group of potential suppliers, which may require different price, ordering cost, lead time and have restriction on minimum and maximum total order size, to satisfy the stochastic demand. A continuous review system that implements the order quantity, reorder point (Q, R) inventory policy is considered in the …

Energy Efficiency In Residential Buildings In Knoxville, Tn, U.S, Minoo Mardookhy

Masters Theses

Energy efficiency is an essential aspect in the design and operation of residential buildings. Residential energy consumption has been shown to account for approximately 8% of the electricity and 3.5% of the natural gas consumption in the U.S. The heating, ventilation, and air conditioning (HVAC) system and lighting system are two major factors influencing energy consumption in residential buildings with about 52~72% of the average energy consumed used to keep buildings at comfortable temperatures, provide hot water, and circulate fresh air indoors. In the service region of the Tennessee Valley Authority (TVA), 92% of electricity is non-renewable electricity, and approximately …

Systems Simulation Using Promodel: An Online Teaching Method, Gustavo Sioni Bosoli

Masters Theses

This study was designed with the purpose to create an online method to deploy the concepts and practical knowledge necessary for the course System Simulation {TEC 5523) offered by Eastern Illinois University. The course is currently offered on a hybrid format, with part of it being ministered in the classroom and the remaining on the online environment. This research focused on creating a set of multimedia and step-by-step lessons aimed to substitute the part of the course that demands the students to be present in the classroom. These lessons were developed based on exercises from the textbook currently used for …

Effects Of Machining Parameters And Cooling Strategies On Cutting Forces And Surface Integrity In High-Speed Slot End-Milling Of Titanium Alloy, Emenike Chukwuma

Masters Theses

“Paper 1 presents the results of the investigations of the effects of cooling strategies [Emulsion cooling, Minimum Quantity Lubrication (MQL) and Liquid Nitrogen (LN₂)] and machining parameters (feed rate and spindle speed) on cutting force components, cutting temperature and tool wear during slot end-milling of titanium Ti-6Al-4V workpiece. All machining experiments were conducted using four-flute 0.5 inch diameter uncoated solid carbide end-mill on Cincinnati Milacron, Sabre 750 vertical machining center equipped with Acramatic 2100 controller. Cutting force components were acquired and tool wear was indirectly measured from maximum cutting force variation per slot from the first pass to …

Predicting Solar Radiation Based On Available Weather Indicators, Frank Joseph Sauer

Masters Theses

"Solar radiation prediction models are complex and require software that is not available for the household investor. The processing power within a normal desktop or laptop computer is sufficient to calculate similar models. This barrier to entry for the average consumer can be fixed by a model simple enough to be calculated by hand if necessary.

Solar radiation modeling has been historically difficult to predict and accurate models have significant assumptions and restrictions on their use. Previous methods have been limited to linear relationships, location restrictions, or input data limits to one atmospheric condition. This research takes a novel approach …

Development Of An Optimization Model To Determine Sampling Levels, Zlatan Hamzic

Masters Theses

"As the complexity of multi-component products increases the quality of these products becomes increasingly difficult to control. The first step to manufacturing a quality product is making sure that the components of the product meet specifications. Product quality can be controlled through sampling inspection of the components. Two models were developed in this research to determine the optimal sampling levels for incoming lots containing parts for production and assembly of multi-component systems. The main objective of the first model is to minimize the expected cost that is associated with a nonconforming item reaching assembly. In this model the time available …

Examining The Efficiency Of Multimodal Transportation Systems: A Systems Dynamics Approach, Lizzette Pérez-Lespier

Masters Theses

"With international trade becoming a big part of the world's economic activity, the demand for good freight transportation systems has grown substantially. The appropriate use of transportation is an integral part of the supply chain's effectiveness. Therefore, the continuous economic globalization, the growing demand for speed-to-market product delivery, and the need to manage global supply chains more effectively, has led to the sustained increase in demand towards multimodal transportation systems (MTS). MTS play an essential role in corporations competing in global markets in the 21st century. In transportation, the effectiveness and efficiency of the whole system depends upon the interconnectivity …

Implementation Of Project Based Learning Technique To Enhance Engineering Education, Dinesh Kanigolla

Masters Theses

"This study investigated the impact of introducing a semester project into three engineering courses where practical application of theoretical knowledge is applicable. Three courses were examined in this work: an undergraduate course in quality, a graduate course in Lean, and a graduate course in Six Sigma. For this research, student teams were given hands-on-projects that included collaboration with local companies. Surveys were conducted to assess the impact of project based learning on students' knowledge. Student responses were recorded and analyzed to determine how students felt the use of the semester project affected the course and to identify the response patterns …

Parametric Moment Closure For Non-Linear State Dependent Stochastic Systems, Ritesh Arora

Masters Theses

"This research highlights the use of moment closure approximation techniques to provide analytical approximations to nonlinear state dependent systems. Nonlinear systems are often difficult to solve and often approximated through the use of simulation. However, Moment Closure has the capability to derive an approximate solution by making a closed form solution out of open set of differential equations representing nonlinear system behavior in both transient and equilibrium state. It is this capability of approximating the closed form solution to complex systems that draws interest in the use of this method within systems engineering. This research further extends to the stability …

Chemical Risk In Early Design, Carlton Ashley Washburn

Masters Theses

The purpose of this thesis is to present a methodology to identify risks in the chemical product development process, including fortification of the failure mode taxonomy by including chemical failures. This work will enable comprehensive risk analysis in technology-based products that have a chemical based subsystem, such as those used in the lithography process in the semiconductor industry. This research broadened the failure mode taxonomy by identifying chemical failures from publications in the semiconductor industry. These failures were analyzed to determine the rudimentary failure modes in each case. The newly identified failure modes were added to the failure mode taxonomy. …

Impact Of Interruptions In White Collar Working Environment, Zafar Akhil Khan

Masters Theses

"An interruption is a randomly occurring, discrete event that breaks continuity of cognitive focuses on a primary task and typically requires immediate attention and insists on action. "White collar interruptions" are those that affect knowledge workers in professional, managerial, or administrative positions. Interruptions are often a common occurrence in the white collar workplace.

The aim of this thesis is to investigate the effect of timing of an interruption on the overall performance of white collar workers. This study also analyzes the interruption sources (i.e. externally and internally generated) along with effect of different types of interruptions on both demanding and …

A Feasibility Analysis Of Retrofitting Existing Roadway Lighting Infrastructure With Led Technology, Sean Michael Schmidt

Masters Theses

LED technology has advanced towards use in high intensity lighting purposes. LED luminaires have a significantly longer expected lifetime than traditional high-intensity discharge lighting systems. Due to these recent improvements in LED technology, there is a growing need for a comprehensive method to analyze the applicability of LED luminaires for use on major routes and roadways. This research investigates the acceptability of LED luminaires for use on major roadways through a feasibility analysis using data collected at various LED street light testing sites. Nine distinct LED luminaires were analyzed in field testing. The field data was then analyzed and compared …

Dynamic Model-Based Systems Engineering Using Xml Metadata Interchange, Dustin Scott Nottage

Masters Theses

"Designing systems presents an engineer with numerous design choices based on multiple conditions and constraints. Base camp planning must take into account the number of soldiers, the permanency of the base, the location of the base, etc. To help alleviate the complexity of constructing a base camp, a model-based systems engineering approach is used. This method creates and integrates models for all of the facilities that can make a base camp, as well as interactions between facilities and required utilities for each. The goal is to have a camp design, and then solve a system of equations to solve for …

Modeling Forward Base Camps As Complex Adaptive Sociotechnical Systems, Lori Ann Miller

Masters Theses

Work for this thesis focuses on managing complexity within complex adaptive sociotechnical systems by using model based systems engineering and virtual engineering tools. The hypothesis of the work is that integrated virtual models can be used to increase the understanding of these complex adaptive sociotechnical systems, resulting in a reduction in the perceived complexity. This was tested by the use of a two factor survey given to experts of a system (the customer and members of the model design team) and to a target user-group. This group received a demonstration and had hands on experience with a preliminary model of …

Logistics Modeling And Project Management Practices For Contingency Basing, Amanda Jo Gealy

Masters Theses

"Contingency basing is a critical factor in mission success but requires significant logistical and commander support. Designing and constructing a camp that is safe, secure, and self-sustaining can be a difficult task for a Contingency Basing engineering manager. The infrastructure for basic needs such as electricity, fuel, water, food, and waste management is critical and needs to be flexible.

This research focuses on assisting the Contingency Basing engineering manager in designing and constructing a feasible base camp using project management and modeling tools. Measuring scalability and resiliency with in the contingency base was studied as well. The methodology concentrates on …

Optimization Of Process Planning For Focused Ion Beam Machine In Nano-Manufacturing, Sushrut Shekhar Naik

Masters Theses

"The current revolution witnessed by nanotechnology is facing several challenges such as manufacturing of nano sized devices economically on a large scale. Focused ion beam (FIB) technology is one of the widely used approaches for nano-manufacturing due to its versatile nature. It provides accurate machining and process repeatability and has a range of applications. Major challenges for the current FIB process are the tradeoffs between quality, the processing time, and the long planning time. This research provides a pathway to eliminate the current problems facing nanotechnology. Using MATLAB and the Helios 600 FIB/SEM instrument available, modeling and analyses are carried …

Modeling Supply Chain Network Resiliency In The Aftermath Of An Extreme Event, Varun Ramachandran

Masters Theses

"Failure of infrastructure elements due to an extreme event adversely affects the supply chain networks in any urban environment. This study models the resiliency of a supply chain network by integrating geospatial data with critical supply chain elements and graph theory. This model can then be combined with an extreme event simulation to calculate resiliency. Resiliency refers to the time required for services and select economic indicators to approach pre-event levels (in this study, a return to 80% of the pre-event capacity). This research proposes an interdisciplinary approach to develop a comprehensive framework for resiliency modeling. This approach includes the …

Prognostics-Based Two-Operator Competition For Maintenance And Service Part Logistics, Faranak Fathi Aghdam

Masters Theses

Prognostics and timely maintenance of components are critical to the continuing operation of a system. By implementing prognostics, it is possible for the operator to maintain the system in the right place at the right time. However, the complexity in the real world makes near-zero downtime difficult to achieve partly because of a possible shortage of required service parts. This is realistic and quite important in maintenance practice. To coordinate with a prognostics-based maintenance schedule, the operator must decide when to order service parts and how to compete with other operators who also need the same parts. This research addresses …

An Experimental Approach For Developing Rfid Ready Receiving And Shipping, Amoldeep Singh Jaggi

Masters Theses

Abstract:

Radio Frequency Identification (RFID) and related technologies have been touted to allow exponential improvements in supply chain logistics and management. However, many industrial users have indicated that these technologies have not provided the anticipated benefits. The two complimentary strategies required to address the RFID reliability are: to improve the reliability of RFID technology and to design the supply chain infrastructure that enables RFID. The focus of this paper is on designing the supply chain infrastructure to enable RFID by developing guidelines for “RFID Ready Facilities”. These guidelines were developed based on a set of experiments conducted in the RFID …

Dynamic Human Resource Predictive Model For Complex Organizations, Tachapon Saengsureepornchai

Masters Theses

Every organization has to deal with planning of the appropriate level of human resources over time. The workforce is not always aligned with the requirements of the organization and it increases an organization’s budget. A literature review reveals that there is no model that can systematically predict accurate human resource required within a complex organization. To address this gap, a human resource predictive model was developed based on material requirements planning (MRP). This approach accounts for complexity in workforce planning and generalized it with a logistic regression model. The model estimates the employee turnover number and forecasts the expected remaining …

Analyzing Supercomputer Utilization Under Queuing With A Priority Formula And A Strict Backfill Policy, Michael David Vanderlan

Masters Theses

Supercomputers have become increasingly important in recent years due to the growing amount of data available and the increasing demand for quicker results in the scientific community. Since supercomputers carry a high cost to build and maintain, efficiency becomes more important to the owners, administrators, and users of these supercomputers. One important factor in determining the efficiency of a supercomputer is the scheduling of jobs that are submitted by users of the system. Previous work has dealt with optimizing the schedule on the system’s end while the users are blinded from the process. The work presented in this thesis investigates …

Interaction Between Primary Resources And Root Causes In Lean Production Systems, Ernest Anene Iwuchukwu

Masters Theses

A model to analyze lean systems reliability is developed based on the premises that lean production systems require four primary resources; materials, equipment, personnel, and schedule (Sawhney, R., Subburaman, K., Sonntag, C., Capizzi, C. and Rao, P.V., 2009). The four primary lean resources were independently analyzed, without due consideration to underlying relationships within each other. In this research, relationships and interaction between root-causes and lean primary resources were conceptualized and developed. The development applied a five-phase approach: 1. review of related literature, 2. decompositions of lean primary resources, 3. selection of consensus root causes items and questionnaire construct, 4. survey …

Increasing Accuracy Of Simulation Modeling Via A Dynamic Modeling Approach, Prasanna Rao Venkateswara Rao

Masters Theses

Simulating processes is a valuable tool which provides in-depth knowledge about overall performance of a system and caters valuable insight on improving processes. Current simulation models are developed and run based on the existing business and operations conditions at the time during which the simulation model is developed. Therefore a simulation run over one year will be based on operational and business conditions defined at the beginning of the run. The results of the simulation therefore are unrealistic, as the actual process will be going through dynamic changes during that given year. In essence the simulation model does not have …

Quantifying The Carbon Footprint Of Lean Waste, Kristen Donovan Balinski

Masters Theses

"The objective of this paper is to provide a method of quantifying lean wastes in terms of carbon dioxide emissions by using value stream mapping. Lean manufacturing, a process based on waste identification and reduction, is a growing trend in industry and a proven method of lowering costs. The environmental impact of these wastes can be quantified by identifying the metrics associated with them, and using existing reports to convert those metrics into measurements of carbon dioxide. Growing environmental concerns are prompting federal government regulation of greenhouse gas or carbon dioxide emissions, as seen in the American Clean Energy and …

Design And Analysis Of A Speed-Aware Routing Protocol For Mobile Ad Hoc Networks, Kirthana Akunuri

Masters Theses

"The flexibility of movement for the wireless ad hoc devices, referred to as node mobility, introduces challenges such as dynamic topological changes, increased frequency of route disconnections and high packet loss rate in Mobile Ad hoc Wireless Network (MANET) routing. This research proposes a novel on-demand routing protocol, Speed-Aware Routing Protocol (SARP) to mitigate the effects of high node mobility by reducing the frequency of route disconnections in a MANET. SARP identifies a highly mobile node which forms an unstable link by predicting the link expiration time (LET) for a transmitter and receiver pair. When the nodes have high relative …

Economic Evaluation Of Sustainable Strategies For The Transportation Sector, Yaqin Lin

Masters Theses

"Sustainable strategies are drawing growing attention as global environmental challenges increase concerns over energy consumption. As one of the most intensive consumers of energy, the transportation sector has a particular need to go green. Implementing alternative energy sources and applying advanced energy efficient technologies are two major approaches to achieve sustainability. Much work thus far used cost-effectiveness as an important criterion for assessing the practicability of sustainable strategies. However, few studies have evaluated such strategies systematically. This thesis has developed a framework of cost-effectiveness analysis to assess sustainability strategies. The framework summarizes the various effects of five representative alternative energy …

Integration Of Model-Based Systems Engineering And Virtual Engineering Tools For Detailed Design, Akshay Kande

Masters Theses

"Design and development of a system can be viewed as a process of transferring and transforming data using a set of tools that form the system's development environment. Conversion of the systems engineering data into useful information is one of the prime objectives of the tools used in the process. With complex systems, the objective is further augmented with a need to represent the information in an accessible and comprehensible manner. The importance of representation is easily understood in light of the fact that the stakeholder's ability to make prompt and appropriate decisions is directly related to his understanding of …