Engineering Education Commons^™

Demystifying Utility Coordination: Understanding The Basics, Josshe I. Palm

Purdue Road School

This session will explain utility coordination to non-utility coordinators. It will help educate others about the role and responsibilities of a utility coordinator, an OSA, easy UC and design mistakes to avoid, scope and design considerations, items commonly overlooked, when to coordinate SUE, and how to work with your UC to request a letting adjustment. We will also highlight UC submittals and allow time for questions about the UC’s role in a project’s success.

Sustainable Water Treatment Systems In The La Vega Region Of The Dominican Republic, Hannah Fulton, Justina Thomae, Jorge Del Angel, Ramin Ansari, Karina Peate, Rylan Elliott, Adam Spieth, Thalia May, Morgan Jung, Ernest R. Blatchley Iii, Rebecca C. Johnson

Graduate Industrial Research Symposium

Purdue University's service-learning course, Water Supply in Developing Countries (WSDC) is dedicated to ensuring access to safe drinking water in the La Vega region of the Dominican Republic. The focus in the current academic year is to enhance the functionality, sustainability, and independence of community-based water treatment systems installed by previous WSDC students. Despite the construction of four water systems since 2012, operational challenges ensued, rendering them currently inoperable. Our objective is to learn from past mistakes, restore the systems and ensure their continuous functionality. During the fall semester, class members assessed repair needs in two communities with existing systems, …

Assessing The Ability Of Arduino-Based Sensor Systems To Monitor Changes In Water Quality, Josiah Hacker

Honors College Theses

Access to safe water is vital to public health. While developed countries like the United States are recognized as having reliable and safe water, many small water utilities struggle with supplying consistent water quality. Technicians of these utilities will periodically test water samples from the influent and throughout the distribution system. However, this laborious and costly process does not capture sudden changes in influent water quality due to environmental conditions or pipes breaking in the distribution system. Here I show how an Arduino-based sensor can be used as a real-time, low-cost monitor of water quality parameters. Specifically, I developed a …

Evaluating The Sustainability Of Infrastructure Projects During Front-End Planning Phase, Valentina Ferrer Rivero

FIU Electronic Theses and Dissertations

Front-End Planning (FEP) for Sustainable Infrastructure (SI) projects is a promising process that can support addressing multiple challenges in infrastructure projects (i.e. cost overruns, schedule delays, and poor sustainability). This study aims to investigate synergies between sustainability and FEP tools for infrastructures through stakeholders’ surveys, multiple case-study analyses, and a Problem-Based Learning (PBL) activity with students. The PBL activity enhanced students’ knowledge on FEP for SI projects, and, together with other analyses, it helped in defining three different frameworks that correlate sustainability and FEP tools for infrastructure projects. The findings of this thesis contribute to the infrastructure, engineering and construction …

Diagnóstico Al Reflujo En El Sistema De Alcantarillado Pluvial Y Sanitario En El Barrio Isla Del Sol, Cesar Divantoque Martinez

Ingeniería Civil

El presente trabajo tiene como finalidad identificar la causa por la cual actualmente se presenta reflujo en el sistema de alcantarillado del barrio Isla del Sol encontrándose este colindante con el río Tunjuelo, para lo anterior se determinó las condiciones actuales del sistema de alcantarillado del barrio Isla del Sol, por ende se empleó la metodología establecida en el reglamento técnico del sector de agua potable y saneamiento básico (Resolución 0330 de 2017), de igual manera se estableció la interacción comprendida entre la descarga del sistema de alcantarillado tanto pluvial como sanitario con los niveles del río Tunjuelo, así mismo …

Retrospective Analysis Of Participatory Decision-Making In A Park's Construction In Lafayette, Indiana, Joshua Randall

Purdue Journal of Service-Learning and International Engagement

The Creative Park project has been an ongoing collaboration between Purdue Engineering Projects in Community Service (EPICS), Faith Community Development Corporation, and the residents of Lincoln Neighborhood in Lafayette, Indiana. It was initiated by Faith in 2017 as an open-ended attempt to increase local children’s interactions with creative and complex thinking as well as decreasing time spent indoors at the Hartford Hub. Through several iterations of designs, an interdisciplinary team with one consistent member has developed a plan to build a treehouse-themed park to be constructed in spring 2020. Throughout this time two major themes have arisen: that the collaboration …

National Summer Transportation Institute: Increasing Career Awareness In Civil Engineering For Underserved High School Students, Melanie L. Villatoro, Janet Liou-Mark

Publications and Research

Our nation needs to increase the number of students pursuing degrees in the fields of Science, Technology, Engineering, and Mathematics (STEM) and those leading to transportation-related careers. In order to meet the demand for qualified graduates in transportation, it is necessary to diversify the pool of students entering college with an interest in these fields. The National Summer Transportation Institute (NSTI) is an educational initiative developed by the Federal Highway Administration (FHWA) and Department of Transportation (DOT). The NSTI at City Tech was designed to increase awareness of transportation-related careers among New York City high school students. The structure of …

Work In Progress: Development Of A General Education First-Year Design Course, Courtney Hollar, Sondra M. Miller

Civil Engineering Faculty Publications and Presentations

We discuss in this Work in Progress paper the development of a new first-year engineering course at Boise State University. ENGR 180 Communication in Design Thinking, was developed in order to emphasize the importance of communication throughout the design process. Communication with the client at the start of the design process occurs in order to understand the problem to be solved. The team and other stakeholders continuously communicate in order to work toward developing a prototype to solve the problem. The ability to effectively communicate is equally as important to the design of the final product. The development of ENGR …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Adapting The Surveying Curriculum To New Dimensions Of The Profession, Fahria Masum, Reinfried Mansberger, Audrey Martin, Gerhard Navratil, Anthony Mushinge

Articles

Today the surveying profession is very different from what it was twenty years ago. Recent technological innovations, globalization, and global land-related challenges have allowed a wide range of advances in the surveying profession. The vision is to promote surveying practices that can enhance the quality of services in a variety of tracks in the land profession. According to the new adjacent professional areas and the needs of the labor market, academic courses for surveyors have to be adapted to meet the broader scope of the surveying profession and to supply highly qualified land professionals. This paper outlines the new challenges …

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly

Faculty Publications

In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …

Hawai'i Wildlife Fund V. County Of Maui, Lowell J. Chandler

Public Land & Resources Law Review

In Hawai’i Wildlife Fund v. County of Maui, the Ninth Circuit held that the plain language of the Clean Water Act provides jurisdiction over indirect discharges of pollutants from a point source into groundwater that is shown to be connected to navigable waters. The court found that studies confirmed pollutants entering the Pacific Ocean were fairly traceable to the County of Maui’s sewage disposal wells. In affirming the district court’s ruling, the Ninth Circuit held that Maui County violated the Clean Water Act by discharging pollutants into a navigable water without the required permit. The court also concluded the …

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Mdp (Machine Drive Power) Intelligent Compaction Technology, Purdue Ect Team

ECT Fact Sheets

Caterpillar developed MDP (Machine Drive Power) technology to fill this gap. Rather than an accelerometer and vibratory drum, it uses the principle of rolling resistance to provide indications of soil stiffness. This allows it to perform more reliably on cohesive and granular soils with less variability than accelerometer systems. It also means that the technology can be used on both vibratory and static drum compactors, which are often used on larger sites. While the technology is quite useful on its own, it is even better as a complementary technology to the existing accelerometer-based systems. Contractors who use vibratory soil compactors …

Purdue’S Biowall, Purdue Ect Team

ECT Fact Sheets

Mechanical ventilation, energy recovery ventilation, and infiltration (air that leaks into a building) are commonly used to introduce fresh air. These are all valid approaches, but a living plant-based filter is an innovative complement to these traditional technologies. A Biowall has the potential to improve indoor air quality while reducing the quantity of air needed for ventilation, creating the potential for energy savings. Figure 1 shows a Biowall prototype being evaluated in the ReNEWW House, a research home located near the Purdue University campus (http://www.renewwhouse.com/).

Garden Building Design Project, Gena Farley, Vanessa Villanueva, Jayanne Asuncion

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Staysha Delgado, Lillian Sam, Ryan Teixeira, Courtney Vierra

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Joseph Cliscagne, Joseph Prescott, Tamara Turton, Saima Uz-Zaman

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Datumate, Purdue Ect Team

ECT Fact Sheets

Datumate is digitally transforming civil engineering processes used in construction, surveying and infrastructure inspection markets with fully automated, highly precise, cost effective and safe tools. It utilizes state-of-the-art image processing and advanced drones and camera technologies dramatically reducing the amount of time surveying crews spend in the field, speeding up construction progress checks and shortening infrastructure inspection duration, while maintaining survey grade accuracy. The intuitive, simple and automated solutions increase productivity by saving field and office time in civil engineering and inspection projects of roads, intersections, stockpile volumes, topography, piping, industrial facilities, bridges, property surveys, building facades, railways, cellular infrastructure …

Technology To Manufacture Oriented Pvc (Pvc-O) Pipes, Purdue Ect Team

ECT Fact Sheets

The development of Molecor´s technology, which is based on the application of a Molecular Orientation process, has delivered a significant turning point in the pipelines sector. With this technological development, the company has begun to manufacture TOM® PVC-O pipes, the most eco-friendly pipes on the market. The Molecor technology enabled eradicating many of the existing disadvantages of thermoplastic pipes.

This technology delivers a clear objective; to provide the water industry with a solution for pipes carrying pressurized water in an environmentally friendly, yet cost efficient manner. This also extends a service life compared to pipeline materials currently in use.

The …

Netpoint®, Purdue Ect Team

ECT Fact Sheets

The vast majority of construction scheduling software uses a combination of spreadsheets and Gantt charts for developing and depicting Critical Path Method (CPM) schedules. While this paradigm works for the expert scheduler, it is not conducive to collaboration, and it is prohibitively difficult for non-scheduling experts to understand.

NetPoint® provides a dynamic, visual interface conducive to touch and gestural input. Activities are drawn directly on a time-scale and may be placed on the same row or arranged automatically using codes or the WBS. Such control of the presentation makes it easier to communicate the plan to any type of audience. …

Fluid Isolator, Purdue Ect Team

ECT Fact Sheets

The reliability of concrete infrastructure is vital to ensuring daily life, as well as commerce, can progress without interruption. From the pavement of interstate highways to the driveways and sidewalks in a local neighborhood, concrete is expensive to install and often even more expensive, and intrusive, when it needs to be replaced. Unfortunately, to maintain functionality in winter climates concrete is heavily exposed to deicing salts. This not only affects the roads, driveways, and sidewalks where salt is applied directly, but many other areas such as parking and residential garages where vehicles (and people) will track salt along with water …

Smartvid.Io, Purdue Ect Team

ECT Fact Sheets

The collection, organization, and retrieval of industrial media is a pervasive challenge that is especially glaring for companies in the AEC industry. Construction projects often generate large volumes of pictures & videos from the field for tracking progress and communicating between engineers, contractors, and subcontractors. It is not uncommon for field personnel to capture hundreds of photos per week on any given jobsite.

Smartvid.io is a cloud-based software solution designed for the specific needs of industrial media. The application’s internal deep-learning engines, collectively nicknamed VINNIE (for ‘Very Intelligent Neural Network for Insight and Evaluation’), use speech and image recognition to …

Hillman Composite Beam (Hcb®), Purdue Ect Team

ECT Fact Sheets

The Hillman-Composite Beam (HCB®), is an innovative structural member for use in highway and railroad bridges as well as marine facilities. The HCB is essentially a lightweight reinforced concrete beam strengthened and protected by a corrosion-resistant and resilient Fiberglass Reinforced Polymer (FRP) shell.

The beam is comprised of three main components, a concrete arch (compression reinforcement), an FRP bottom flange encapsulating steel strands tying the ends of the arch together (tension reinforcement) and the FRP shell. Galvanized Rebar “shear connectors” are used to make the beam composite with the concrete deck in the same manner as pre-stressed concrete beams.

The …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Purdue Ect Report - Fourth Quarter 2016, Purdue Ect Team

ECT Fact Sheets

Fourth Quarter 2016

This is a quarterly report from the Purdue ECT.

Road Zipper™, Purdue Ect Team

ECT Fact Sheets

Construction work zones are growing in number around the world. The natural aging of existing roadway infrastructure ensures that more and more maintenance and rehabilitation will be required. Work zones, by their very definition, create two major problems that must be addressed in some way: safety and mobility. In the United States, highway work zones are responsible for almost 25% of all non-recurring congestion and 10% of overall congestion. Vehicle accidents are more common in work zones, and traffic congestion through work zones on urban arterials and freeways is often considered to be “unavoidable." To address these issues, ROAD ZIPPER™ …

Lucidpipe™ Power System, Purdue Ect Team

ECT Fact Sheets

In most gravity fed water transmission pipelines, it is desired to reduce excess pressure head to prevent undue strain on a pipeline and lower the incidence of leaks. Normally this is done with pressure reducing valves that essentially burn off this excess pressure as heat. The LucidPipe™ system converts it to low cost electricity thereby removing unwanted pressure and generating energy at the same time - energy that can be put used behind the grid or put back on the grid. The LucidPipe™ system extracts a small percentage of pressure head providing nearly invisible operation allowing water operators to fulfill …

Development Of An Instrument To Measure The Entrepreneurial Mindset Of Engineering Students, Cheryl Q. Li, Ronald S. Harichandran, Maria-Isabel Carnasciali, Nadiye O. Erdil, Jean Nocito-Gobel

Civil Engineering Faculty Publications

This work in progress describes the development of an instrument to measure entrepreneurial mindset of engineering students. The need for developing the entrepreneurial mindset of engineering students is being recognized by many universities. However, very few comprehensive, generalized and well-validated instruments are available for assessing the entrepreneurial mindset of engineering students. Most research and educational efforts focus on the design and implementation of engineering entrepreneurship programs, but assessment practices have not kept up.1-2 There are several reasons for the shortfall in assessment practices: 1) Introducing engineering students to entrepreneurship is a relatively new trend and it will take time for …

Civilizing The Civil Engineer: How A History Course Can Serve As A Curriculum Capstone, John Alfred Heitmann

John A. Heitmann

Beginning in 1989 and then every other year thereafter, a unique course dealing specifically with the history of civil engineering has been taught to all civil engineering majors at the University of Dayton. What has evolved over time -- in response to student feedback, ongoing reform in the curriculum, and a maturing of faculty expertise -- is a course in the history of civilization that has as its major focus the discipline of civil engineering. In reality, what happens in the classroom is a far broader learning experience than either the disciplines of history or civil engineering could provide standing …