Computer Engineering Commons^™

Co-Emulation Of Scan-Chain Based Designs Utilizing Sce-Mi Infrastructure, Bill Jason Pidlaoan Tomas

UNLV Theses, Dissertations, Professional Papers, and Capstones

Simulation times of complex System-on-Chips (SoC) have grown exponentially as designs reach the multi-million ASIC gate range. Verification teams have adopted emulation as a prominent methodology, incorporating high-level testbenches and FPGA/ASIC hardware for system-level testing (SLT). In addition to SLT, emulation enables software teams to incorporate software applications with cycle-accurate hardware early on in the design cycle. The Standard for Co-Emulation Modeling Interface (SCE-MI) developed by the Accelera Initiative, is a widely used communication protocol for emulation which has been accepted by major electronic design automation (EDA) companies.

Scan-chain is a design-for-test (DFT) methodology used for testing digital circuits. To …

Nonlinear Adaptive Diffusion Models For Image Denoising, Ajay Kumar Mandava

UNLV Theses, Dissertations, Professional Papers, and Capstones

Most of digital image applications demand on high image quality. Unfortunately, images often are degraded by noise during the formation, transmission, and recording processes. Hence, image denoising is an essential processing step preceding visual and automated analyses. Image denoising methods can reduce image contrast, create block or ring artifacts in the process of denoising. In this dissertation, we develop high performance non-linear diffusion based image denoising methods, capable to preserve edges and maintain high visual quality. This is attained by different approaches: First, a nonlinear diffusion is presented with robust M-estimators as diffusivity functions. Secondly, the knowledge of textons derived …

On High-Performance Parallel Fixed-Point Decimal Multiplier Designs, Ming Zhu

UNLV Theses, Dissertations, Professional Papers, and Capstones

High-performance, area-efficient hardware implementation of decimal multiplication is preferred to slow software simulations in a number of key scientific and financial application areas, where errors caused by converting decimal numbers into their approximate binary representations are not acceptable.

Multi-digit parallel decimal multipliers involve two major stages: (i) the partial product generation (PPG) stage, where decimal partial products are determined by selecting the right versions of the pre-computed multiples of the multiplicand, followed by (ii) the partial product accumulation (PPA) stage, where all the partial products are shifted and then added together to obtain the final multiplication product. In this thesis, …

Snail Algorithm For Task Allocation In Mesh Networks, Bartosz Duszel

UNLV Theses, Dissertations, Professional Papers, and Capstones

Topic of this master's thesis is connected with task allocation algorithms and mesh networks. Author of this work has already graduated from Wroclaw, University of Technology (Poland) where during his studies he created software simulation environment for two different task allocation algorithms for mesh networks:Adaptive ScanandFrame Sliding. Those algorithms were compared by two, main parame- ters: simulation time and average mesh fulfillment (utilization level). All simulations were done in software environment which was developed specially for that research. This application was based on few, different types of objects: task (width, height, processing time), task queue (different number of tasks), task …

High-Performance, Scalable Optical Network-On-Chip Architectures, Xianfang Tan

UNLV Theses, Dissertations, Professional Papers, and Capstones

The rapid advance of technology enables a large number of processing cores to be integrated into a single chip which is called a Chip Multiprocessor (CMP) or a Multiprocessor System-on-Chip (MPSoC) design. The on-chip interconnection network, which is the communication infrastructure for these processing cores, plays a central role in a many-core system. With the continuously increasing complexity of many-core systems, traditional metallic wired electronic networks-on-chip (NoC) became a bottleneck because of the unbearable latency in data transmission and extremely high energy consumption on chip. Optical networks-on-chip (ONoC) has been proposed as a promising alternative paradigm for electronic NoC with …

An End To End V.M.T Framework With Controlled V.M.T Tax Rate Using Optimal Feedback Control Technique, Pratik Verma

UNLV Theses, Dissertations, Professional Papers, and Capstones

Vehicle Mile Travel (VMT) is a study related to available alternatives for the road

revenue collection system. As per the demand, the existing Gas/Fuel tax based revenue

collection system is not found an appropriate option in the longer run. Due

to existing system constraints like: no eective tax process for vehicles based on alternative

fuel (e.g. electric vehicles), no eective changes in tax due to economical

ination, and more highway expenditure than generated revenue, an alternative revenue

collection mechanism is required. Hence, the objective is to study an alternative

option in detail, which can address the gaps between required revenue …

Modeling And Architectural Simulations Of The Statistical Static Timing Analysis Of The Variation Sources For Vlsi Circuits, Abu M. Baker

College of Engineering: Graduate Celebration Programs

As CMOS technology scales down, process variation introduces significant uncertainty in power and performance to VLSI circuits and significantly affects their reliability. Although Static-Timing Analysis (STA) remains an excellent tool, current trends in process scaling have imposed significant difficulties to STA. As one of the promising solutions, Statistical static timing analysis (SSTA) has become the frontier research topic in recent years in combating such variation effects. This poster will be focusing on two aspects of SSTA and its applications in VLSI designs: (1) Statistical timing modeling and analysis; and (2) Architectural implementations of the atomic operations (max and add) using …

A P2p Computing System For Overlay Networks, Grzegorz Chmaj, Krzysztof Walkowiak

Electrical & Computer Engineering Faculty Research

A distributed computing system is able to perform data computation and distribution of results at the same time. The input task is divided into blocks, which are then sent to system participants that offer their resources in order to perform calculations. Next, a partial result is sent back by the participants to the task manager (usually one central node). In the case when system participants want to get the final result, the central node may become overloaded, especially if many nodes request the result at the same time. In this paper we propose a novel distributed computation system, which does …

Image Segmentation For Quantification Of Air-Water Interface In Micro-Ct Soil Images, Kranthi Kumar Potteti

UNLV Theses, Dissertations, Professional Papers, and Capstones

Soils are complex environments comprising various biological (roots, water, air etc) and physical constituents (minerals, aggregates, etc). Synchrotron radiation based X-ray microtomography (XMT) is widely used in extracting qualitative and quantitative information regarding spatial distribution of biological and physical soil constituents. Segmentation of these micro-CT soil images is of interest to geologists, hydrologists, civil and petroleum engineers and soil scientists. In this present work, we study and implement segmentation algorithms for microhydrology studies, specifically for soil water conductivity. Three well-known image segmentation algorithms are studied for evaluating their performance for the task. We demonstrate the problems and ways to segment …

Hardware Implementation Of Processor Allocator For Mesh Connected Chip Multiprocessors, Rana Sangram Reddy Marri

UNLV Theses, Dissertations, Professional Papers, and Capstones

The advancements in the semiconductor process technology and the current demand for highly parallel computing has led to the advent of Chip Multiprocessors (CMPs). CMP is the integration of two or more independent processor cores, which can read and execute program instructions, on to a single integrated circuit die. CMPs are the main computing platforms for research and development in parallel and high performance computing environments. They offer minimum inter-core communication latencies as the processor cores are present on a single chip.

The Operating System (OS) plays a key role in using a CMP effectively. The OS should support a …

Heuristic Algorithms For Optimization Of Task Allocation And Result Distribution In Peer-To-Peer Computing Systems, Grzegorz Chmaj, Krzysztof Walkowiak, Michal Tarnawski, Michal Kucharzak

Electrical & Computer Engineering Faculty Research

Recently, distributed computing system have been gaining much attention due to a growing demand for various kinds of effective computations in both industry and academia. In this paper, we focus on Peer-to-Peer (P2P) computing systems, also called public-resource computing systems or global computing systems. P2P computing systems, contrary to grids, use personal computers and other relatively simple electronic equipment (e.g., the PlayStation console) to process sophisticated computational projects. A significant example of the P2P computing idea is the BOINC (Berkeley Open Infrastructure for Network Computing) project. To improve the performance of the computing system, we propose to use the P2P …

A Consumer Level Simulation Model For Demand Response Analysis On Smart Grid, Sungchul Lee, Yoohwan Kim

College of Engineering: Graduate Celebration Programs

With the growing awareness of the need for Smart Grid, various countries are taking initiatives for developing Smart Grid.

However, there is limited research on utilizing Smart Grid for Demand-Response (DR).

This study advances the current system of DR by creating a Smart Grid Simulator that allows an intuitive demand response analysis.

The simulator demonstrates that substantial amount of electric power can be reduced efficiently by selective demand control over Smart Grid.

The graphical interface allows generating the electrical usage data and displays both individual and aggregate usage data over time.

This research employs U.S. census data for accurate estimate …

A Refreshable And Portable E-Braille System For The Blind And Visually Impaired, Mohammad Saadeh, Mohamed Trabia

College of Engineering: Graduate Celebration Programs

• Braille is a communication system to assist the blind and visually impaired.
• Present an approach to measure fingertip forces while identifying Braille characters.
• Implement a force sensory feedback in the device to measure the force developed on the fingertip.
• Introduce a preliminary design for the device.
• Build a prototype for the device and evaluate its functionality and integrate its components

Location Of Processor Allocator And Job Scheduler And Its Impact On Cmp Performance, Dawid Zydek, Grzegorz Chmaj, Alaa Shawky, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

High Performance Computing (HPC) architectures are being developed continually with an aim of achieving exascale capability by 2020. Processors that are being developed and used as nodes in HPC systems are Chip Multiprocessors (CMPs) with a number of cores. In this paper, we continue our effort towards a better processor allocation process. The Processor Allocator (PA) and Job Scheduler (JS) proposed and implemented in our previous works are explored in the context of its best location on the chip. We propose a system, where all locations on a chip can be analyzed, considering energy used by Network-on-Chip (NoC), PA and …

Decision Strategies For A P2p Computing System, Grzegorz Chmaj, Krzysztof Walkowiak

Electrical & Computer Engineering Faculty Research

Peer-to-Peer (P2P) computing (also called ‘public-resource computing’) is an effective approach to perform computation of large tasks. Currently used P2P computing systems (e.g., BOINC) are most often centrally managed, i.e., the final result of computations is created at a central node using partial results – what may be not efficient in the case when numerous participants are willing to download the final result. In this paper, we propose a novel approach to P2P computing systems. We assume that results can be delivered to all peers in a distributed way using three types of network flows: unicast, Peer-to-Peer and anycast. We …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Software Development Approach For Discrete Simulators, Grzegorz Chmaj, Dawid Maksymilian Zydek

Electrical & Computer Engineering Faculty Research

Simulation is the most common approach to perform the problem research. Among several types of simulation, the most common way is the discrete simulation, which assumes the division of the time scale into fixed length time slots. Depending on investigated problem, simulation packages may be used or it could be necessary to design and create own simulation system. In this paper, we propose the complete pre-study scheme and the most commonly appearing implementation problems with suggested solutions. We also describe how to implement the exemplary simulator in C++.

Data Routing In Multicore Processors Using Dimension Increment Method, Arpita H. Kadakia

UNLV Theses, Dissertations, Professional Papers, and Capstones

A Deadlock-free routing algorithm can be generated for arbitrary interconnection network using the concept of virtual channels but the virtual channels will lead to more complex algorithms and more demands of NOC resource.

In this thesis, we study a Torus topology for NOC application, design its structure and propose a routing algorithm exploiting the characteristics of NOC. We have chosen a typical 16 (4 by 4) routers Torus and propose the corresponding route algorithm. In our algorithm, all the channels are assigned 4 different dimensions (n0,n1,n2 & n3). By following the dimension increment method, we break the dependent route circles, …

Self-Stabilizing Group Membership Protocol, Mahesh Subedi

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this thesis, we consider the problem of partitioning a network into groups of bounded diameter.

Given a network of processes X and a constant D, the group partition problem is the problem of finding a D-partition of X, that is, a partition of X into disjoint connected subgraphs, which we call groups, each of diameter no greater than D. The minimal group partition problem is to find a D-partition {G1, ... Gm} of X such that no two groups can be combined; that is, for any Gi and Gj, where i ≠ j, either Gi U Gj is disconnected …

Automated Procedures For Quantification Of Rhizosphere Physical Properties In Micro Ct Images, Natarajan S. Pillai

UNLV Theses, Dissertations, Professional Papers, and Capstones

The rhizosphere, i.e. the zone of soil immediately surrounding plant roots plays a prominent role in supplying plants with water and nutrients. However, surprisingly little is known about rhizosphere physical properties and how they affect root growth, water and nutrient uptake. The lack of non-invasive and non-destructive imaging techniques necessary to observe living roots growing in undisturbed soil have been a main reason for this shortcoming. Recent advances in synchrotron X-ray micro tomography (CMT) provide the potential to directly observe soil physical properties around living roots in-situ.In this work we develop procedures for assisting scientist to study the soil properties …

Processor Allocator For Chip Multiprocessors, Dawid Maksymilian Zydek

UNLV Theses, Dissertations, Professional Papers, and Capstones

Chip MultiProcessor (CMP) architectures consisting of many cores connected through Network-on-Chip (NoC) are becoming main computing platforms for research and computer centers, and in the future for commercial solutions. In order to effectively use CMPs, operating system is an important factor and it should support a multiuser environment in which many parallel jobs are executed simultaneously. It is done by the processor management system of the operating system, which consists of two components: Job Scheduler (JS) and Processor Allocator (PA). The JS is responsible for job scheduling that deals with selection of the next job to be executed, while the …

Random Approach To Optimization Of Overlay Public-Resource Computing Systems, Grzegorz Chmaj, Krzysztof Walkowiak

Electrical & Computer Engineering Faculty Research

The growing need for computationally demanding systems triggers the development of various network-oriented computing systems organized in a distributed manner. In this work we concentrate on one kind of such systems, i.e. public-resource computing systems. The considered system works on the top of an overlay network and uses personal computers and other relatively simple electronic equipment instead of supercomputers. We assume that two kinds of network flows are used to distribute the data in the public-resource computing systems: unicast and peer-to-peer. We formulate an optimization model of the system. After that we propose random algorithms that optimize jointly the allocation …

A Graph-Based Approach To Symbolic Functional Decomposition Of Finite State Machines, Piotr Szotkowski, Mariusz Rawski, Henry Selvaraj

Electrical & Computer Engineering Faculty Research

This paper discusses the symbolic functional decomposition method for implementing finite state machines in field-programmable gate array devices. This method is a viable alternative to the presently widespread two-step approaches to the problem, which consist of separate encoding and mapping stages; the proposed method does not have a separate decomposition step instead, the state's final encoding is introduced gradually on every decomposition iteration. Along with general description of the functional symbolic decomposition method's steps, the paper discusses various algorithms implementing the method and presents an example realisation of the most interesting algorithm. In the end, the paper compares the results …

Human Identification Using Pyroelectric Infrared Sensors, Aron E. Suppes

UNLV Theses, Dissertations, Professional Papers, and Capstones

The objective of this thesis is to discuss the viability of using pyroelectric infrared (PIR) sensors as a biometric system for human identification.

The human body emits infrared radiation, the distribution of which varies throughout the body, and depends upon the shape and composition of the particular body part. A PIR sensor utilizing a Fresnel lens will respond to this infrared radiation. When a human walks, the motion of the body's individual components form a characteristic gait that is likely to affect a PIR sensor field in a unique way.

A statistical model, such as a Hidden Markov Model, could …

Text Categorization Based On Apriori Algorithm's Frequent Itemsets, Prathima Madadi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Automatic Text categorization is the task of assigning an electronic document to one or more categories, based on its contents. There are many known techniques to efficiently solve categorization problems. Typically these techniques fall into two distinct methodologies which are either logic based or probabilistic. In recent years, many researchers have tried approaches which area hybrid of these two methodologies.

In this thesis, we deal with document categorization using Apriori Algorithm. The Apriori algorithm was initially developed for data mining and basket analysis applications in the relational databases. Although the technique is logic based, it also relies on the statistical …

Scheduling Architectures For Diffserv Networks With Input Queuing Switches, Mei Yang, Henry Selvaraj, Enyue Lu, Jianping Wang, S. Q. Zheng, Yingtao Jiang

Electrical & Computer Engineering Faculty Research

ue to its simplicity and scalability, the differentiated services (DiffServ) model is expected to be widely deployed across wired and wireless networks. Though supporting DiffServ scheduling algorithms for output-queuing (OQ) switches have been widely studied, there are few DiffServ scheduling algorithms for input-queuing (IQ) switches in the literaure. In this paper, we propose two algorithms for scheduling DiffServ DiffServ networks with IQ switches: the dynamic DiffServ scheduling (DDS) algorithm and the hierarchical DiffServ scheduling (HDS) algorithm. The basic idea of DDS and HDS is to schedule EF and AF traffic According to Their minimum service rates with the reserved bandwidth …

Free Regions Of Sensor Nodes, Laxmi P. Gewali, Navin Rongatana, Henry Selvaraj, Jan B. Pedersen

Electrical & Computer Engineering Faculty Research

We introduce the notion of free region of a node in a sensor network. Intuitively, a free region of a node is the connected set of points R in its neighborhood such that the connectivity of the network remains the same when the node is moved to any point in R. We characterize several properties of free regions and develop an efficient algorithm for computing them. We capture free region in terms of related notions called in-free region and out-free region. We present an O(n2) algorithm for constructing the free region of a node, where n is the number of …

Performance Evaluation Of Network-On-Chip Interconnect Architectures, Xinan Zhou

UNLV Theses, Dissertations, Professional Papers, and Capstones

With a communication design style, Network-on-Chips (NoCs) have been proposed as a new Multi-Processor System-on-Chip paradigm. Simulation and functional validation are essential to assess the correctness and performance of the NoC design. In this thesis, a cycle-accurate NoC simulation system in Verilog HDL is developed to evaluate the performance of various NoC architectures. First, a library of NoC components is developed based on an existing design. Each NoC architecture to be evaluated is constructed from the library according to the topology description which specifies the network topology, network size, and routing algorithm. The network performance of four NoC architectures under …

On-Board Three-Dimensional Object Tracking: Software And Hardware Solutions, Ajay Kumar Mandava

UNLV Theses, Dissertations, Professional Papers, and Capstones

We describe a real time system for recognition and tracking 3D objects such as UAVs, airplanes, fighters with the optical sensor. Given a 2D image, the system has to perform background subtraction, recognize relative rotation, scale and translation of the object to sustain a prescribed topology of the fleet. In the thesis a comparative study of different algorithms and performance evaluation is carried out based on time and accuracy constraints. For background subtraction task we evaluate frame differencing, approximate median filter, mixture of Gaussians and propose classification based on neural network methods. For object detection we analyze the performance of …

Extents And Limits Of Radioscopic Detection Of Nuclear Materials In Cargo Containers With Two Megavoltage Energy Barriers, Vijay Kumar Mandava

UNLV Theses, Dissertations, Professional Papers, and Capstones

The megavoltage X-ray technology is utilized for detecting nuclear materials in cargo containers. Interlaced response is obtained by switching rapidly between 6MeV and 9 MeV beams. It is known that the ratio of penetration levels of cargo contents taken at nominal and dual energies provides the information about atomic numbers of materials, and thus can also indicate the threat group. However, the identification is not straightforward if combinations of materials are present. The latter can lead to misdetections. It is imperative to know what are the extent and the limit of the currently employed technology, and how to carry out …