Engineering Commons^™

Effect Of Channelized And Unchannelized Lateral Outflow On Three-Dimensional Flow Structure And Sediment Transport Mechanisms In A River Delta, Mohammad Kifayath Chowdhury

LSU Master's Theses

Spatial and temporal patterns in three-dimensional flow structure have been linked to channel morphology and processes in many environments, including river meander bends, confluences-diffluences, and bedrock canyons. However, there is not yet an understanding of how channelized and gradual, distributed lateral outflows that are often prevalent in deltaic distributary systems influence three-dimensional flow structure and sediment transport mechanisms. This thesis presents an analysis of 3D flow structure data collected from Wax Lake Delta, a naturally developing river-dominated delta in the northern Gulf of Mexico. Three hydrographic surveys were conducted using boat-mounted acoustic Doppler current profiler (ADCP) at two sites: an …

An Economic And Ecological Analysis Of Three Land Building Approaches Using Mississippi River Sediment, Madison Hasenkampf

Honors Theses

No abstract provided.

Over Height Impact Avoidance And Incident Detection System, Suvash Chapain, Aly Mousaad Aly

Faculty Publications

During the construction and repair of bridges, work platforms or construction-related containment may result in restricted vertical clearances at a work location. Some tractor-trailer combinations are prone to over-height collisions at these locations. Collisions are a hazard to all drivers, and repair of the damage typically causes traffic delays. Appropriate solutions to this problem will focus on the prevention of collisions by detecting over-height vehicles and directing the drivers to take an alternate safe route. This presentation addresses the design and functionality of smart detection/alert systems that can be set up well in advance of a known vertical clearance restriction …

Mass Spectrometric Calibration For Real -Time Hydrocarbon Detection, Makuachukwu Mbaegbu

LSU Master's Theses

Determining gas compositions from live well fluids on a drilling rig is critical for real time formation evaluation. However, development and utilization of a reliable mass spectrometric method to accurately characterize these live well fluids is always a challenging issue because of lack of a robust, quick and effectively selective instrument and method. The primary goal of this research is to understand reasons of such discrepancies in results between “good” spectra, and “poor” ones. The objectives are thus to identify the detection issues, calibrate and QA/QC the instruments, and analyze the results in lab settings. In this study, we used …

A Hop-By-Hop Relay Selection Strategy In Multi-Hop Cognitive Relay Networks, Hui Sun, Mort Naraghi-Pour, Weixing Sheng, Renli Zhang

Faculty Publications

In this paper, a hop-by-hop relay selection strategy for multi-hop underlay cognitive relay networks (CRNs) is proposed. In each stage, relays that successfully decode the message from previous hop form a decoding set. Taking both maximum transmit power and maximum interference constraints into consideration, the relay in the decoding set which has the largest number of channels with an acceptable signal-to-noise ratio (SNR) level to the relays in the next stage is selected for retransmission. Therefore, relay selection in each stage only relies on channel state information (CSI) of the channels in that stage and does not require the CSI …

Noble-Transition Alloy Absorbers For Near-Infrared Hot-Carrier Optoelectronics, Sara Karoline Figueiredo Stofela

LSU Doctoral Dissertations

Optoelectronics is the field of technology concerned with the study and application of electronic devices that source, detect and control light. Here we focus on the optical communications field which relies on optical fiber systems to carry signals to their destinations operating in the near-infrared range. To improve the performance of current optical fiber systems, one of the paths is to develop better near-infrared photodetectors.

The current group of materials used for near-infrared photodetection relies in the III-V semiconductor family. Although their spectral photosensitivity correlates well with the near-infrared, response time performance and electronic circuit integration remain limited for this …

Retrospective Study Of Fmol Health System Utilization Using Geospatial Information, Deekshith Mandala

LSU Master's Theses

Medicaid Expansion and closing of Emergency Departments (ED) like Earl K. Long, Baton Rouge General Mid-City ED, and Champion Medical Center changed the health care landscape in East Baton Rouge Parish (EBRP). In this research study, a Geographical Information System (GIS) is used to analyze the impact of the expansion of Medicaid and the inauguration of Our Lady of the Lake North Baton Rouge ED (OLOL NBR ED) over the utilization of Franciscan Missionaries of our Lady Health System (FMOLHS) for both emergency and non-emergency health care services. This study is performed across the 58 neighborhoods of EBRP. Overutilization of …

Fate Of Eroding Crude Asphalt And Emulsion In Shallow Marsh Embayments, William Coronel

LSU Master's Theses

Marshes impacted by the Macondo spill continue to erode, releasing crude oil in the form of a soft asphalt or emulsion to adjacent shallow embayments. This process moves highly weathered crude oil from the marsh profile to comparatively high-energy, shallow, open-water systems where geochemical and microbiological conditions may influence additional weathering. Specifically, we hypothesize that the erosion process can accelerate biodegradation by moving crude oil asphalts and emulsions from a low-energy, anoxic environment in the marsh to a higher-energy, oxic environment in these shallow embayments. Sediment samples were taken in summer 2017 and 2018 across transects which bisect the boundary …

Experimental And Computational Tools For Single Cell Analysis In Cancer Diagnostics, Manibarathi Vaithiyanathan

LSU Doctoral Dissertations

Substantial evidence shows that cellular heterogeneity commonly exists within an isogenic or clonal population. Whether in isolation or caused through a combination of the above events, cellular heterogeneity can dramatically influence cellular decision making and cell fate, however, this can be masked by the average response from a population. One approach to solve this issue is to analyze a population at the individual cell level. The goal of this work is to develop high-throughput experimental and computational platforms to screen and quantify single cancer cells for specific intracellular enzyme activities. An interdisciplinary approach was taken to 1) better understand the …

Experimental Evaluation Of How Mineralogy And Microstructure Impact Micro-Geomechanics Of Shale Rocks, Hui Du

LSU Doctoral Dissertations

Shales play an essential role in petroleum exploration and production because they can occur either as unconventional reservoir rocks for hydrocarbon extraction via hydraulic fracturing or as caprocks for conventional reservoirs and subsurface gas/ waste storage. For both extraction and storage applications, the success rate is directly depending on the rigorous candidate selection. Conventional rock characterization techniques normally measure rock properties by seismic/logging at the reservoir scale, and on drilled/outcrop cores at the core scale. However, shales are highly heterogeneous in composition, containing a large number of reactive minerals in micro/nanoscale with significantly different properties. The structural features and properties …

The Desorption Kinetics Of Methane From Nonaqueous Fluids For Enhanced Well Control, James Lee Nielsen Jr.

LSU Master's Theses

The mass transfer of a dissolved gas evolving to return to the gaseous phase from a liquid is governed by many parameters. This process affects the development of an oil and gas well due to the possibility of gas contamination occurring from either an influx entering the wellbore, or drilling through gas-bearing formations. Once this dissolved hydrocarbon gas circulates up the wellbore, it will begin to evolve from solution and poses a potential risk to drilling equipment, the environment, and personnel at a drilling rig. Being able to predict the behavior of gas desorption based on a known set of …

First-Principle Study On The Interaction Of Ligands With Gold And Effects On Catalytic Activities, Xun Cheng

LSU Doctoral Dissertations

The extensive use of fossil fuels has increased the atmospheric concentration of CO₂, resulting in global climate change. One way to mitigate the CO₂ challenge is to convert it into useful chemicals electrocatalytically using renewable energies. Recent studies suggest that ligand-modified gold electrodes can enhance the Faradaic efficiency (FE) and selectivity of the electrochemical CO₂ reduction reaction (CO₂RR). This theoretical research, primarily based on density functional theory (DFT), has been carried out to understand the interactions of ligands with Au and possible effects on electrocatalytic activities. We systematically modeled and studied the adsorption of …

A Study Of Particle-Laden Flows From Meso And Micro-Scale Perspectives, Daniel Guedes De Oliveira

LSU Doctoral Dissertations

Particle-laden flows are investigated numerically from a meso-scale perspective using Computational Fluid Dynamics coupled with Discrete Element Method (CFD-DEM) and from a micro-scale perspective using Particle Resolved Direct Numerical Simulation (PR-DNS). For the former, the dynamics of a pseudo-2D pulsed fluidized bed (PFB) consisting of 400,000 to 800,000 particles was investigated (Chapters 2 and 3). The focus is on the capabilities of CFD-DEM to (1) reproduce pattern formation in these systems and (2) further the understanding of the dynamics of PFB's as a function of pulsation parameters. In Chapter 4, a two-spheres system is investigated with a recently implemented PR-DNS …

Automatic Shoreline Digitization And Mesh Element Sizing For Hydrodynamic Modeling, Henok Kefelegn

LSU Doctoral Dissertations

The first and most critical step in any coastal hydrodynamics and transport process modeling is identifying land-water boundaries. In a coastal wetland, this has always been a challenge due to the complexity of the wetland and lack of efficient methods, calling for efficient and effective methods to extract and digitize the shorelines. While coastline feature extraction has been increasingly researched, its application in hydrodynamic and environmental modeling, without morphological adjustment, remains limited and suboptimal. Further, there has been a paucity of cost-effective, contextually adaptive and high-quality methods to generate meshes, especially for coastal hydrodynamic modeling. This study has developed and …

Development And Validation Of A Simplified Transient Two-Phase Flow Model For Any Pipe Inclination, Ligia Tornisiello

LSU Master's Theses

This study describes the development and validation of an improved simplified model for transient two-phase flow for any pipe inclination. The simplified model proposed has been validated with field-scale test well and laboratorial data, and also compared to the state-of-the-art commercial simulator for transient two-phase flow in pipes. The results of the simplified model showed an agreement within the range of ±30% for the holdup predictions for 65% of the scenarios, and an agreement within the range of ±30% for the pressure predictions for 82% of the scenarios considered in this work.

In the oil and gas industry, transient two-phase …

Concentrations, Sources And Health Risks Of Particulate Matter In Southeast Us: Current Status And Future Changes, Fenglin Han

LSU Doctoral Dissertations

Evaluation of long-term air quality trends and prediction of future air quality may help to design and demonstrate effectiveness of control strategies and guide future air quality management. As one of the six criteria air pollutants (CAPs) regulated by the US Environmental Protection Agency (EPA), particulate matter with aerodynamic diameter of 2.5 µm or less (PM_2.5) is of great interests since it has adverse effects on human health, visibility and climate. This study aims to understand the current status and future changes in concentrations, sources, and health risks of PM_2.5 in Southeast US. Firstly, observations were analyzed …

Liability Of The Structural Engineer: Establishing, Quantifying, And Managing Risks, Justin Thomas Ittmann

LSU Doctoral Dissertations

Liability is an important topic to all practicing professionals—including practicing engineers. However, the topic of liability does not receive the necessary attention required relative to other professions. Further, engineers that desire to learn more about liability in relation to their practice do not have many university options within an engineering curriculum or from outside materials available to a non-legally trained engineer. The goal of the study is to provide a comprehensive overview of liability directed towards an intelligent practicing engineer, while avoiding unnecessary over-simplification of the material. This study initially provides an in depth survey of the legal standard of …

Synthesis Of Lamno3 & Ceo2-Mnox Nanocrystals For Selective Catalytic Reduction, Joseph Lane

Honors Theses

No abstract provided.

Peak Pressures On Low Rise Buildings: Cfd With Les Versus Full Scale And Wind Tunnel Measurements, Aly Mousaad Aly, Hamzeh Gol-Zaroudi

Faculty Publications

This paper focuses on the processes of wind flow in the atmospheric boundary layer, to produce realistic full-scale pressures for the design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g. COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD …

Operational Planning Of Supply Chains In A Production And Distribution Center With Just-In-Time Delivery, Pablo Biswas, Bhaba Sarker

Faculty Publications

Purpose: A supply chain consists of raw material suppliers, manufacturers and retailers where inventory of raw materials and finished goods are involved, respectively. Therefore, it is important to find optimal solutions, which are beneficial for both supplier, manufacturer and retailer.

Design/methodology/approach: This research focuses on a semi-continuous manufacturing facility by assuming that the production of succeeding cycle starts immediately after the production of preceding cycle. In reality, the inventory of a supply chain system may not be completely empty. A number of products may be left over after the deliveries are made. These leftover inventories are added to the next …