Engineering Commons^™

Chronic Kidney Disease Android Application, Paul Le

Computer Science and Engineering Senior Theses

Chronic kidney disease is increasingly recognized as a leading public health problem over the world that affects more than 10 percent of the population worldwide, where electrolytes and wastes can build up in your system. Kidney failure might not be noticeable until more advanced stages where it may then become fatal if not for artificial filtering or a transplant. As a result, it is important to detect kidney disease early on to prevent it from progressing to kidney failure. The current main test of the disease is a blood test that measures the levels of a waste product called creatine …

The Unheard Voices Of The Arkansas Delta: Living Through School Desegregation, Tameka D. Williams

ATU Theses and Dissertations 2021 - Present

This study was guided by the central research question: What are the lived experiences and perceptions of former African American teachers and students that endured segregation, desegregation, and integration in Arkansas' Delta? The phenomenological study used eight former African American teachers and student participants. Of the participants, there were four former teachers and four former students. In this study, the participants' voices are captured as they share their experiences and perception of each phase of education that influenced their lives and left an everlasting imprint. Through counternarratives, the participants provided insight into education in the Arkansas Delta during school segregation, …

Prediction Of Self-Consolidating Concrete Properties Using Xgboost Machine Learning Algorithm: Part 1–Workability, Amine El Mahdi Safhi, Hamed Dabiri, Ahmed Soliman, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Interest in Implementing Self-Consolidating Concrete (SCC) in Major Construction Projects Has Increased Significantly in Recent Years. This Paper Reports the Results of an Extensive Survey of Experimental Data of More Than 1700 SCC Mixtures from over 100 Studies Published in the Last Decade. the Survey Included the SCC Mixture Proportioning, Key Fresh Properties Including Flowability, Passing Ability, and Segregation Resistance, as Well as Some of the Derived Properties (E.g., Paste Volume). the Statistical Analysis of the Reported Parameters Showed Wide Variations in Values. the Outcome of the Survey Indicates that SCC Mixture Design and Workability Properties Do Not Systematically …

Low-Cement Concrete Mixture For Bridge Decks And Rails, Soumitra Das, George Morcous Ph.D., Jiong Hu

Nebraska Department of Transportation: Research Reports

Right after construction, drying shrinkage of restrained concrete bridge decks and rails causes early-age cracking, insertion of water and chemicals, and corrosion of reinforcing steel that eventually leads to delamination and spalling of concrete. The main objective of this research is to control early-age shrinkage cracking by reducing cementitious material content in bridge deck and rail concrete mixtures. Several reduced cementitious materials concrete (RCMC) mixtures were developed by optimizing aggregate particle packing and conducting overall performance evaluation. This evaluation was carried out in three phases. The first phase investigated the feasibility of new RCMC mixtures by testing workability, compressive strength, …

Lcc Mse Walls, Joel Smith

Theses and Dissertations

Lightweight cellular concrete (LCC) is mainly a mixture of water, cement, and foam bubbles. LCC generally has a cast density between 20-60 pcf and an air content between 49-84%. LCC is often used as a fill material because it has a low unit weight which reduces settlement. LCC is increasingly being considered as a backfill behind Mechanically Stabilized Earth (MSE) walls and embankments. Although engineers are using LCC in MSE walls or free face walls (MSE wall without the concrete panels or reinforcements), there is presently a lack of information regarding the performance and behavior of LCC to guide them. …

A Tunable System For High Frequency Bioimpedance Plethysmography, Daniel H. Tebbs

Theses and Dissertations

Bioimpedance measurements are useful for determining a variety of biological conditions. By accounting for small impedance variations due to the arterial pulse, the effect of the blood can be studied more closely. The quasi-circulator system presented enables monitoring of pulsatile impedance changes with input frequencies above 1 MHz. The adjustable Rmatch allows for dynamic tuning of the system to increase sensitivity. By tuning Rmatch to be near the match point, the pulsatile signal in the output magnitude can be amplified, and tuning Rmatch to be at the match point causes the pulsatile signal in the output phase to be amplified. …

Dynamic Segmental Kinematics Of The Lumbar Spine During Diagnostic Movements, Paul Mcmullin

Theses and Dissertations

While lumbar kinematics can be measured in vivo, most measurements are invasive (such as percutaneous bone pins), provide high doses of radiation (such as biplane fluoroscopy), or are taken with the patient in a static position (such as MRIs). Recent work suggests that lumbar kinematics can be determined by dynamic measurements of epidermal strain in the lower back. This work aims to develop and examine a method of examining lumbar kinematics via optoelectronic motion capture utilizing skin-mounted markers in the lumbar region. Two studies were performed. One study examined lumbar epidermal strain in 28 asymptomatic subjects during diagnostic movements, while …

Combined Design And Dispatch Optimization For Nuclear-Renewable Hybrid Energy Systems, Daniel Clyde Hill

Theses and Dissertations

Reliable, affordable access to electrical power is a requirement for almost all aspects of developed societies. Challenges associated with reducing carbon emissions has led to growing interest in nuclear-renewable hybrid energy systems (N-RHES). Much work has already been done in suggesting and analyzing various N-RHES using a variety of optimization techniques and assumptions. This work builds upon previous techniques for simultaneous combined design and dispatch optimization (CDDO) for hybrid energy systems (HES). The first contribution of this work is the development and application of sensitivity analysis tailored to the combined design and dispatch optimization problem. This sensitivity analysis cover uncertainty …

Traffic Light Detection And V2i Communications Of An Autonomous Vehicle With The Traffic Light For An Effective Intersection Navigation Using Mavs Simulation, Mahfuzur Rahman

Theses and Dissertations

Intersection Navigation plays a significant role in autonomous vehicle operation. This paper focuses on enhancing autonomous vehicle intersection navigation through advanced computer vision and Vehicle-to-Infrastructure (V2I) communication systems. The research unfolds in two phases. In the first phase, an approach utilizing YOLOv8s is proposed for precise traffic light detection and recognition, trained on the Small-Scale Traffic Light Dataset (S2TLD). The second phase establishes seamless connectivity between autonomous vehicles and traffic lights in a simulated Mississippi State University Autonomous Vehicle Simulation (MAVS) environment resembling a small city with multiple intersections. This V2I system enables the transmission of Signal Phase and Timing …

Cement Stabilization Of Poorly Graded Sand, Lana Grayson Brown Sisung

Theses and Dissertations

Stabilization of poorly graded sand in full-scale applications is challenging. This thesis evaluated cement-stabilized sand and had two objectives: (1) evaluation of stabilized material using the PM device to quantify engineering properties for future comparison to alterative materials and to investigate the effectiveness of the device with sand and (2) investigation of the merits of alternative application of cement to sand to benchmark against other topically applied materials. The PM device was successfully used to recommend 10% cement for field studies with one sand, successfully allowed data collection in laboratory and field applications, and its potential in sand seems promising …

Evaluation Of Unmanned Aerial Vehicle Flight Parameters That Impact Stockpile Volume Computations, Nicole Marie Hastings

Theses and Dissertations

Stockpile volumes are monitored by their companies as the product (i.e., aggregate, soil) is moved in and out of the facilities to ensure minimal product loss. Companies are mandated to report product movement to the government to ensure that the aggregate and soil is going where it is supposed to go. Many tools are used to monitor stockpile volumes including truck scales (to weigh incoming and outgoing trucks), light detection and ranging (LiDAR), Global Navigation Satellite System (GNSS) equipment, and unmanned aerial vehicle (UAV) photogrammetry. These processes give a good estimate of stockpile volumes. Errors in these estimates typically come …

Neural Networks For Improved Signal Source Enumeration And Localization With Unsteered Antenna Arrays, John T. Rogers Ii

Theses and Dissertations

Direction of Arrival estimation using unsteered antenna arrays, unlike mechanically scanned or phased arrays, requires complex algorithms which perform poorly with small aperture arrays or without a large number of observations, or snapshots. In general, these algorithms compute a sample covriance matrix to obtain the direction of arrival and some require a prior estimate of the number of signal sources. Herein, artificial neural network architectures are proposed which demonstrate improved estimation of the number of signal sources, the true signal covariance matrix, and the direction of arrival. The proposed number of source estimation network demonstrates robust performance in the case …

Improved Methodology For Conducted Emi Assessment Of Power Electronics And Line Impedance Measurement, Mark Anthony Didat

Theses and Dissertations

Electromagnetic Interference (EMI), primarily common mode (CM), is problematic in a wide range of electronic circuits due to its propensity to radiate, particularly in high power applications. It is routine for much effort and resources to be dedicated to its characterization and reduction as EMI compliance is a requirement for most electronic systems and devices, including power electronics. Many well-known factors contribute to a system’s EMI performance including intentional coupling from system components as well as unintentional coupling from parasitics. Sources of intentional coupling may include Y-capacitors intended to mitigate EMI as part of a filter. Unintentional coupling is more …

An Investigation Into Applications Of Canonical Polyadic Decomposition & Ensemble Learning In Forecasting Thermal Data Streams In Direct Laser Deposition Processes, Jonathan Storey

Theses and Dissertations

Additive manufacturing (AM) is a process of creating objects from 3D model data by adding layers of material. AM technologies present several advantages compared to traditional manufacturing technologies, such as producing less material waste and being capable of producing parts with greater geometric complexity. However, deficiencies in the printing process due to high process uncertainty can affect the microstructural properties of a fabricated part leading to defects. In metal AM, previous studies have linked defects in parts with melt pool temperature fluctuations, with the size of the melt pool and the scan pattern being key factors associated with part defects. …

Design And Performance Of Fiber-Reinforced Shrinkage Compensating Eco-Friendly Concrete, Kamran Aghaee, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Eco-Crete is an ecological and economical concrete that benefits from high packing density of solid materials and reduced paste. Eco-Crete can enhance the service life of structures by reducing the risk of shrinkage cracking. In this study, shrinkage mitigating materials included an expansive agent (EA), a shrinkage reducing admixture (SRA), and a lightweight sand (LWS), as well as steel and synthetic fibers were used to minimize the risk of cracking. A total of 35 fiber-reinforced Eco-Crete mixtures were prepared with 350 kg/m3 of cementitious materials and 55 % substitution of fly ash and slag. Key fresh and mechanical properties in …

Investigation And Control Of Görtler Vortices In High-Speed Flows, Omar Es-Sahli

Theses and Dissertations

High-amplitude freestream turbulence and surface roughness elements can excite a laminar boundary-layer flow sufficiently enough to cause streamwise-oriented vortices to develop. These vortices resemble elongated streaks having alternate spanwise variations of the streamwise velocity. Following the transient growth phase, the fully developed vortex structures downstream undergo an inviscid secondary instability mechanism and, ultimately, transition to turbulence. This mechanism becomes much more complicated in high-speed boundary layer flows due to compressibility and thermal effects, which become more significant for higher Mach numbers. In this research, we formulate and test an optimal control algorithm to suppress the growth rate of the aforementioned …

Moisture Effects On Visible Near-Infrared And Mid-Infrared Soil Spectra And Strategies To Mitigate The Impact For Predictive Modeling, Francis Hettige Chamika Anuradha Silva

Theses and Dissertations

Instrumental disparities and soil moisture are two of the key limitations in implementing spectroscopic techniques in the field. This study sought to address these challenges through two objectives. The first objective was to assess Visible-near infrared (VisNIR) and mid-infrared (MIR) spectroscopic approaches and explore the feasibility of transferring calibration models between laboratory and portable spectrometers. The second objective addressed the challenge of soil moisture and its impact on spectra. The portable spectrometers demonstrated comparable performance to their laboratory-based counterparts in both regions. Spiking with extra-weight, was the most effective calibration transfer method eliminating disparities between instruments. The samples were rewetted …

A Review On Ship Recycling Industry In Bangladesh From Global Perspective, Ahammad Abdullah, Zobair Ibn Awal, M Ziauddin Alamgir, Md. Jobayer Mia, Farihatul Mim, Utpal K. Dhar

Journal of Ocean and Coastal Economics

At present, the global center of the ship breaking and recycling industry is in South Asia, specifically Bangladesh, India, and Pakistan. These three countries account for 70–80 percent of the international recycling market for ocean-going vessels, with China and Turkey covering most of the remaining market. Only about 5 percent of global volume is scrapped outside these five countries. Bangladesh has environmentally beneficial coastal region and affordable labor that make the shipbreaking and recycling business as a potential sector for the country. In addition, ship recycling and its related businesses are helping to solve our nation’s unemployment issues at all …

Analyzing Flight Delays: Legacy And Low-Cost Carriers In The U.S., Kwangyeol Yang, Dae Keun Jeon, Nawaf Nasser M. Alsubaie, Vivek Sharma, Brooke Wheeler

Aeronautics Student Publications

This study analyzed flight delays between legacy and low-cost carriers in the U.S. from 2013 to 2022. The study found a higher average percentage of flights delayed among low-cost carriers than legacy carriers and identified a significant difference in the percentage of total flights delayed by airline type.

Artificial Intelligence & Aviation: A Content Analysis, Victor E. Morales, Jonathan Escalera, Jose Sanchez, Brooke Wheeler, Vivek Sharma

Aeronautics Student Publications

The aviation industry has explored the integration of artificial intelligence (AI) into its unique aspects. This study aimed to identify the trends in publications that discuss AI and aviation within 2013-2023. A content analysis is used to identify any regressions in the trends of publication counts discussing AI and aviation. The study collected publication data from the Advanced Technologies & Aerospace Database (ATAD) using specific search terms, “AI and aviation,” “artificial intelligence and aviation,” “AI and aircraft,” and “AI and aircraft safety,” to accurately obtain publications. The collected data is then categorized by publications per year and is represented in …

Cobalt Chromium In Biomedical Applications And The Development Of A Pspp Map, Nouralhouda Jamal

Bagley College of Engineering Publications and Scholarship

During the world wars, Cobalt-Chromium (Co-Cr) alloys gained prominence for their use in aircraft engine components, where they exhibited high temperature strength and durability. They are used in a wide range of industries due to their unique set of qualities, particularly strength, corrosion resistance, and biocompatibility. They have emerged as versatile materials with a broad spectrum of applications, from aerospace and automotive components to biomedical implants.

This paper presents a thorough analysis of its composition, processing techniques, microstructure, mechanical properties, and performance characteristics. The primary goal of this project is to develop a PSPP (Process, structure, properties, and performance) map …

Quantification Of Intervertebral Disc Strain From High-Resolution Ultrasound Imaging During Dynamic Loading, Diya Sakhrani

Discovery Undergraduate Interdisciplinary Research Internship

High-resolution ultrasound imaging employs high-frequency sound waves that can be used to noninvasively visualize the structures within the body, facilitating medical diagnosis without the need for open surgery. The widespread utilization of ultrasound is attributed to its affordability, non-invasive characteristics, and use of non-ionizing radiation. Nevertheless, ultrasound is prone to artifacts originating from the surrounding environment, gas-liquid interfaces, or dense tissue. These artifacts are common in ultrasound images and can cause dropout, noise, and degraded resolution. In this study we analyzed intervertebral disc (IVD) strain during two axial compression testing cycles of bovine intervertebral discs with a 2-dimensional direct deformation …

Systematic Comparison Of Nonviral Gene Delivery Strategies For Efficient Co-Expression Of Two Transgenes In Human Mesenchymal Stem Cells, Tyler Kozisek, Luke Samuelson, Andrew Hamann, Angela K. Pannier

Department of Biological Systems Engineering: Papers and Publications

Background Human mesenchymal stem cells (hMSCs) are being researched for cell-based therapies due to a host of unique properties, however, genetic modification of hMSCs, accomplished through nonviral gene delivery, could greatly advance their therapeutic potential. Furthermore, expression of multiple transgenes in hMSCs could greatly advance their clinical significance for treatment of multifaceted diseases, as individual transgenes could be expressed that target separate pathogenic drivers of complex diseases. Expressing multiple transgenes can be accomplished by delivering multiple DNA vectors encoding for each transgene, or by delivering a single poly-cistronic vector that encodes for each transgene and accomplishes expression through either use …

Shop & Speak: The Hottest Eye-Phone App On The Market, Angelo N. Ledonne

Honors Capstones

In the U.S, approximately 20 million individuals (8% of the population) are partly or completely visually impaired. This disability makes some everyday tasks such as reading, writing, shopping, traveling, etc., difficult. But, with the advancement of technology over the past few decades, design products and software have been created that help level the playing field for those in need. The only hurdle that still exists today is the cost and availability of these products, leaving many affected individuals with very little or no assistance in their everyday lives. This project was inspired by my grandmother’s disability. She was born with …

Comparison Of Methods For Estimating Instantaneous Turn Radius Of Ackermann Steering Vehicles, Kenneth Gennaro Stutts

Doctoral Dissertations and Master's Theses

The instantaneous turn radius of an Ackermann steering vehicle is the distance to a point in space about which the vehicle will travel in an arc during a turn. There are at least six ways to estimate instantaneous turn radius and each method uses different inputs and has distinct advantages and disadvantages. In this thesis, six different methods will be used to estimate the instantaneous turn radius of a vehicle traveling on a closed circuit. This testing will clarify similarities and differences between the methods. This thesis clarifies which method will be the most appropriate for a given set of …

Change In Air Cargo Revenue Before Vs During The Covid-19 Pandemic, Ali Abushal, Timothy R. Buchal, Ethan Noto, Brooke Wheeler, Vivek Sharma

Aeronautics Student Publications

This study aimed to investigate the changes in revenue experienced by cargo airlines before and during the COVID-19 pandemic. To gather the necessary data, information was sourced from the Securities and Exchange Commission's (SEC) databases and the websites of the specific airlines. The findings of this study revealed significant shifts in revenue for cargo airlines during the pandemic. Some airlines experienced an unexpected rise in revenue, challenging our previous understanding of the industry dynamics. These findings highlighted the importance of conducting a comprehensive analysis that includes a larger view of the aviation sector.

The COVID-19 pandemic had a profound impact …

Wildlife Strikes By Damage Category In The U.S. From 2013-2022, Malek Alharbi, Catherine Meechan, Brooke Wheeler, Vivek Sharma

Aeronautics Student Publications

The FAA provides the public with a database containing reports of wildlife strikes. We gathered data on the reported types of damage and concluded there was a difference in the annual strike rate by damage category with no damage as the most reported damage category.

Investigating The Effects Of Unfused Powder Damping In Laser Powder Bed Fusion, Samuel Hao Teng

Theses and Dissertations

This study uses Additive Manufacturing (AM) processes to fabricate 316L stainless steel beams with pockets of unfused powder for increased damping. Modal testing was completed to compare damping factors of beams with varying pocket geometries as well as number of pockets and pocket location. For the first three bending modes that were tested, an initial damping increase was observed when pocket height is greater than powder diameter. Following the initial increase there is a height threshold, which is mode dependent, that is required to achieve a statistically significant increase in damping.

A Series Of Improved And Novel Methods In Computer Vision Estimation, James J. Adams

Theses and Dissertations

In this thesis, findings in three areas of computer vision estimation are presented. First, an improvement to the Kanade-Lucas-Tomasi (KLT) feature tracking algorithm is presented in which gyroscope data is incorporated to compensate for camera rotation. This improved algorithm is then compared with the original algorithm and shown to be more effective at tracking features in the presence of large rotational motion. Next, a deep neural network approach to depth estimation is presented. Equations are derived relating camera and feature motion to depth. The information necessary for depth estimation is given as inputs to a deep neural network, which is …

Thermally Rearranging Polyimide Networks For High-Temperature Applications, William Guzman

Dissertations

High-performance polymers can retain functional properties when exposed to long-term or short-term durations of harsh conditions, such as mechanical action, at elevated temperatures (>177 °C). A mixture of intramolecular and intermolecular forces of and between polymer chains provide excellent property retention at elevated temperatures. Specifically, the highly aromatic nature of high-performance polymer backbones provides outstanding thermal stability, which is typically attributed to π-π stacking. However, the interrelationship between thermal stability and high aromaticity creates a challenging structure-processing relationship paradigm, which causes poor polymer processability in most high-performance polymers. Herein, it was demonstrated that rationally designing a crosslinking phenylethynyl imide …