Engineering Commons^™

Control Of Thermoforming Process Parameters To Manufacture Surfaces With Pin-Based Tooling, Vijay Sarthy Mysore Sreedhara

All Theses

Many manufacturing processes used to mass produce parts rely on expensive and time consuming tooling. These processes include sheet metal forming, injection molding, casting, and thermoforming. The time invested in design and development of tooling can be justified for high-production volumes. However, for low-volume production and customized products, the tooling investment cannot be amortized. Flexible tooling has been developed to address the needs of smaller production volumes. Reconfigurable pin tooling is an example of flexible tooling that relies on a matrix of adjustable-height pins to produce approximate surfaces. A key challenge in pin-based tooling is achieving accurate high quality surfaces …

Structural Optimization Using Parametric Programming Method, Krupakaran Ravichandraan

All Theses

The Parametric Programming method is investigated to consider its applicability to structural optimization problems. It is used to solve optimization problems that have design variables as implicit functions of some independent input parameter(s). It provides optimal solutions as a parametric function of the input parameter(s) for the entire parameter space of interest. It does not require the detailed discrete optimizations needed at a large number of parameter values as in traditional non-parametric optimization. Parametric programming is widely used in optimal controls, model predictive control, scheduling, process synthesis and material design under uncertainty due to the above mentioned benefits. Its benefits …

A Novel Approach To Evaluating Compact Finite Differences And Similar Tridiagonal Schemes On Gpu-Accelerated Clusters, Ashwin Trikuta Srinath

All Theses

Compact finite difference schemes are widely used in the direct numerical simulation of fluid flows for their ability to better resolve the small scales of turbulence. However, they can be expensive to evaluate and difficult to parallelize. In this work, we present an approach for the computation of compact finite differences and similar tridiagonal schemes on graphics processing units (GPUs). We present a variant of the cyclic reduction algorithm for solving the tridiagonal linear systems that arise in such numerical schemes. We study the impact of the matrix structure on the cyclic reduction algorithm and show that precomputing forward reduction …

Impact Of Constructing A Low Crested Weir In Cape Canaveral On Flushing In The Banana River, Atousa Saberi

Theses and Dissertations

The purpose of this study is to determine the extent to which constructing a low crested weir adjacent to Port Canaveral improves ushing in the Banana River. The Banana River is a 50 km long sub-basin of Indian River Lagoon (IRL), located between Cape Canaveral and Merritt Island in Brevard County. Although Port Canaveral locks connect the Banana River to the ocean, the locks remain closed when there are no passing vessels; therefore, it has limited circulation and a long ushing time. Declining water quality can be linked to recent high mortality events of di erent species living in the …

Resistance Prediction For Asymmetrical Configurations Of High-Speed Catamaran Hull Forms, Srikanth Asapana

Theses and Dissertations

Predicting the resistance of a high-speed catamaran has been of interest to naval architects for the last three decades. Even though considerable amount of research has been carried out in this area, there remains a degree of uncertainty in the accurate resistance prediction of catamaran hull forms in the early design stage. Researches carried out so far have generally ignored the resistance characteristics of unconventional and unsymmetrical catamaran hull forms. This thesis attempts to undertake a comparative analysis of resistance characteristics between newly developed unconventional catamaran hull forms of different configurations derived from existing conventional NPL series of round bilge …

Pressure Field Estimation Using Particle Image Velocimetry, Jean O. Calzada

Theses and Dissertations

In recent years, scientist and engineers have shown the advantages created by using the Particle Image Velocimetry (PIV) method as flow diagnostic tool to characterize instantaneous velocity fields. One of the important benefits is found on its non-intrusive nature, this leads to accurate velocity fields. From the velocity field obtained by PIV important quantities can be derived, such as pressure and vorticity. The present study, uses PIV data of an incompressible turbulent pulsed jet to determine the pressure field associated with the flow field. The pressure is calculated by using the averaged velocity field along with three different fundamental equation: …

Sparse Aperture Speckle Interferometry Telescope Active Optics Control System, Matthew Clause

Master's Theses

A conventional large aperture telescope required for binary star research is typically cost prohibitive. A prototype active optics system was created and fitted to a telescope frame using relatively low cost components. The active optics system was capable of tipping, tilting, and elevating the mirrors to align reflected star light. The low cost mirror position actuators have a resolution of 31 nm, repeatable to within 16 nm. This is accurate enough to perform speckle analysis for the visible light spectrum. The mirrors used in testing were not supported with a whiffletree and produced trefoil-like aberrations which made phasing two mirrors …

Underwater Rope Fatigue Testing Machine, Napoleon Nino, Andrew Pimentel

Mechanical Engineering

The design and fabrication of an underwater rope fatigue testing machine meant to simulate the effects of an oceanic environment and the effects on rope.

Thermal Hydraulic Turbine Dynamometer, Ryan Baskett, Alexander Campbell, Andrew Puntorno-Carlberg

Mechanical Engineering

No abstract provided.

Machine Components Test, Brandon Younger, Lauren Romero, Carlos Padilla

Mechanical Engineering

To enhance California Polytechnic State University’s Mechanical Engineering program, Dr. Schuster has sponsored Brandon Younger, Lauren Romero, and Carlos Padilla to design and develop a new lab for students in the Intermediate Design class to test real mechanical components. This report discusses the background and ideation process that lead to the development of the Educational Mechanical Breadboard for Transmission System Components (Machine Components Test). Additionally, detailed drawings, 3D modeling, testing plans, and analysis are included to show how the Machine Components Test design will work and be validated.

Squirting Balloon Toy, Rachael Schelley, Elizabeth Wilhelm

Mechanical Engineering

The main goal of the Squirting Balloon Toy project was to create a new toy that combined both a helium balloon and a squirting water component near the base of the balloon. The toy will be sold at theme parks, fairs, and to other retailers such as toy stores with the target audience of primarily children and their parents, or any individuals seeking a good laugh when they spray their unsuspecting target. As a result, the toy was designed to be both visually appealing and to have an element of surprise. After testing and analyzing four different conceptual designs, two …

High Temperature Hepa Filter Test Unit Upgrades, Alexander Krippner, Ian Corcorran, Michael Burlando

Mechanical Engineering

No abstract provided.

Carbon Articulating Backpack Spine, Salvatore Monforte Iii, Darci Lawrence, Savan Patel

Mechanical Engineering

In the field, firefighters and Urban Search and Rescue (USAR) personnel need to transport variable loads efficiently, safely, and comfortably while simultaneously performing certain physical tasks. Current models of external and internal framed backpacks distribute the load of a pack efficiently, but do not allow for the natural movement of the wearer. Wolfpack Gear, Inc. proposed the need for a system which both effectively carries a load and allows for the unhindered natural movement of the user. The goal of this project was to design, build, and test an articulating backpack support system. The first stage of the project comprised …

High Speed Jet Turbine Test Final Report, Kenneth Enstrom, Cameron Naugle, Isaac Thomas, Cody Lee

Mechanical Engineering

At high flight altitudes and speeds, external airplane elements are subject to immense loads. External devices must be put through testing that simulates these loads to ensure safety of the device. Our system will subject a device in need of testing to a jet of air, similar to wind seen on the surface of an airplane. The High Speed Air Jet Turbine Test project team has been tasked to design, build, and test an apparatus capable of acquiring real world flight data for micro-ram air turbines (microRAT). The micro-RAT is a device that provides power to an electrical device by …

Process Development For Compression Molding Of Hybrid Continuous And Chopped Carbon Fiber Prepreg For Production Of Functionally Graded Composite Structures, Corinne Marie Warnock

Master's Theses

Composite materials offer a high strength-to-weight ratio and directional load bearing capabilities. Compression molding of composite materials yields a superior surface finish and good dimensional stability between component lots with faster processing compared to traditional manufacturing methods. This experimental compression molding capability was developed for the ME composites lab using unidirectional carbon fiber prepreg composites. A direct comparison was drawn between autoclave and compression molding methods to validate compression molding as an alternative manufacturing method in that lab. A method of manufacturing chopped fiber from existing unidirectional prepreg materials was developed and evaluated using destructive testing methods. The results from …

Three Degree-Of-Freedom Parallel Actuator Telescope Mount, Garrett Daniel Gudgel

Master's Theses

This thesis contains the design, implementation, and testing of an original, small-scaled two degree-of-freedom telescope mount and a medium-scaled three degree-of-freedom telescope mount inspired by the six degree-of-freedom Stewart-Gough platform telescope mount. The end product is intended to achieve research-standard resolution of targeted sky coverage for binary star research. The scaled prototype was carried through concept design, manufacturing, software development, and testing. The mount software development and electronic design is applicable to a full-scale mount as the drivers have been designed to be easily adapted to different actuator configurations. It is recommended that this design be implemented into a telescope …

Modeling The Residual Useful Life Of Railroad Bearing Grease, Thania Alejandra Martinez

Theses and Dissertations

Railroad bearing performance is often constrained by the life of its lubricant. The lubricant life is determined by tribomechanical processes that are present during bearing operation. No known physical models exist to predict the railroad bearing lubricant life. This thesis summarizes the efforts undertaken in the development of empirical models that can accurately predict the residual useful life of railroad bearing grease. Modeling techniques to be employed include regression, regression trees, and split plots. The grease samples used to populate this model come from healthy and faulty bearings that were run under different loads, speeds, and ambient conditions in a …

Hand Adjustable Position Override For Large Exit Bin, David J. Michalik, Alex Wiseman, Kelsey Grover, David Bryan

Chancellor’s Honors Program Projects

No abstract provided.

Zero Energy Ready Multifamily Dwellings For The Redevelopment Of Downtown Knoxville, Tn, William Twickler, Ben Webb, Georgia White

Chancellor’s Honors Program Projects

No abstract provided.

Towards A Semantic Knowledge Management Framework For Laminated Composites, Vivek Premkumar

Masters Theses

The engineering of laminated composite structures is a complex task for design engineers and manufacturers, requiring significant management of manufacturing process and materials information. Ontologies are becoming increasingly commonplace for semantically representing knowledge in a formal manner that facilitates sharing of rich information between people and applications. Moreover, ontologies can support first-order logic and reasoning by rule engines that enhance automation. To support the engineering of laminated composite structures, this work developed a novel Semantic LAminated Composites Knowledge management System (SLACKS) that is based on a suite of ontologies for laminated composites materials and design for manufacturing (DFM) and their …

Multiple Scales Of Beach Morphodynamic Processes: Measurements And Modelling, Jun Cheng

USF Tampa Graduate Theses and Dissertations

Multiple scales of beach morphodynamic processes ranging from those of wave-breaking induced turbulence, individual wave, storm, seasonal, to inter-annual are examined in this dissertation based on both laboratory and field data. These processes were simulated using process-based numerical models and data-driven models.

At a microscale, separating turbulence from orbital motion under breaking waves in the surf zone is essential to understanding wave-energy dissipation. Velocity data under monochromatic and random waves in the large-scale sediment transport facility (LSTF) were analyzed. Moving averaging provides a simple method for extracting turbulence from velocity measurements under random breaking waves collected at a reasonably high …

Simulation Of Magnetic Field Induced Current And Neuron Spiking For Magnetic Seizure Therapy, Abhijeet R. Wadkar

Electronic Thesis and Dissertation Repository

Magnetic seizure therapy (MST) is currently on trial to treat severe cases of depression. This thesis is concerned with getting a deeper understanding of the mechanics behind MST by employing FEA of brain. The simulations performed via COMSOL helped identify the dimensions and coil types of the MST device as well as the angular probing orientations. Largest induced current due to the externally imposed magnetic field was found in the cerebrospinal fluid which was found to act as a barrier to induce current in the gray matter. In an attempt to relate the induced current to the neuron spiking, a …

Corrosion Of Steel In Submerged Concrete Structures, Michael Thomas Walsh

USF Tampa Graduate Theses and Dissertations

This investigation determined that severe corrosion of steel can occur in the submerged portions of reinforced concrete structures in marine environments. Field studies of decommissioned pilings from actual bridges revealed multiple instances of strong corrosion localization, showing appreciable local loss of steel cross-section. Quantitative understanding of the phenomenon and its causes was developed and articulated in the form of a predictive model. The predictive model output was consistent with both the corrosion rate estimates and the extent of corrosion localization observed in the field observations. The most likely explanation for the observed phenomena that emerged from the understanding and modeling …

Kinematic Control Of Redundant Mobile Manipulators, Mustafa Mashali

USF Tampa Graduate Theses and Dissertations

A mobile manipulator is a robotic arm mounted on a robotic mobile platform. In such a system, the degrees of freedom of the mobile platform are combined with that of the manipulator. As a result, the workspace of the manipulator is substantially extended. A mobile manipulator has two trajectories: the end-effector trajectory and the mobile platform trajectory. Typically, the mobile platform trajectory is not defined and is determined through inverse kinematics. But in some applications it is important to follow a specified mobile platform trajectory. The main focus of this work is to determine the inverse kinematics of a mobile …

Development Of An In-Vitro Passive And Active Motion Simulator For The Investigation Of Wrist Function And Kinematics, Duncan J. Iglesias

Electronic Thesis and Dissertation Repository

This thesis outlines the design and development of an active motion simulator for the investigation of wrist kinematics in multiple gravity loaded positions. Using optical trackers on the third metacarpal, radius, and ulna, the position of the wrist was monitored in real time without introducing material incompatibilities as present for electromagnetic tracking systems. Performance of the system was performed using a series of five cadaver upper limbs that compared the ability to produce repeatable trials using unrestrained active motion techniques over passive manipulation methods. Comparisons to achieve static positions as well as motion trials in flexion-extension and radial-ulnar deviation planes …

Heat Transfer Analysis Of Slot Jet Impingement Onto Roughened Surfaces, Rashid Ali Alshatti

USF Tampa Graduate Theses and Dissertations

The effect of surface roughness on jet impingement heat transfer was investigated in this research. A numerical analysis was conducted for free surface slot jet impinging normally onto a heated plate. Six different geometries and three different plate materials were investigated. The cooling fluid used for the analysis was water, and the flow was laminar with a range of Reynolds number (Re) from 500 to 1000. Temperature distribution, local and average heat transfer coefficient, and local and average Nusselt number were presented for each case.

The steady state heat transfer results show that the increase in Reynolds number (Re) increases …

Use Of Fdm Components For Ion Beam And Vacuum Applications, Eric Miguel Tridas

USF Tampa Graduate Theses and Dissertations

This study focuses on novel approaches to the modeling and construction of devices used in ion beam and vacuum systems. Turbulent computational fluid dynamics simulations were performed to model the air flow into an ion funnel system. The results of these simulations were coupled one-way with electrodynamics simulations of the fields generated by the ion funnel. Using the turbulence kinetic energy (k), a spatially varying estimation of the fluctuating component of the velocity field was calculated. These resulting simulations more accurately predicted the ion transmission through the system. Using fused deposition modeling (FDM) novel construction methods for the ion funnel …

Wind Power Capacity Value Metrics And Variability: A Study In New England, Frederick W. Letson

Doctoral Dissertations

Capacity value is the contribution of a power plant to the ability of the power system to meet high demand. As wind power penetration in New England, and worldwide, increases so does the importance of identifying the capacity contribution made by wind power plants. It is critical to accurately characterize the capacity value of these wind power plants and the variability of the capacity value over the long term. This is important in order to avoid the cost of keeping extra power plants operational while still being able to cover the demand for power reliably. This capacity value calculation is …

Design, Fabrication And Analysis Of A Paver Machine Push Bar Mechanism, Mahendra Palnati

USF Tampa Graduate Theses and Dissertations

Now-a-days, the major challenge that’s being faced by the concrete industry is the cleaning of concrete handling equipment. Concrete consists of aggregates, which harden with time, and the transportation of concrete mixture within the plant is a significant problem. This will not only increase the overall maintenance cost, but will lead to loss of raw materials, affect the rate of production, and reduce the lifetime of concrete handling equipment.

The present study focuses on the design and implementation of an adaptive cleaning mechanism in the concrete industry and its importance in achieving efficient cleaning, which is tested to verify its …

The Development Of A Fluorescence-Based Reverse Flow Injection Analysis (Rfia) Method For Quantifying Ammonium At Nanomolar Concentrations In Oligotrophic Seawater, William Abbott

USF Tampa Graduate Theses and Dissertations

The goal of this thesis was to adopt a reverse flow injection analysis (rFIA) technique to the fluorometric analysis of the reaction o-phthaldialdehyde (OPA) with ammonium, allowing accurate measurements of ammonium concentrations lower than the detection limit of the widely used indophenol blue (IPB) colorimetric method while accounting for the background fluorescence of seawater. Ammonium is considered an essential nutrient for primary productivity, especially in the nutrient depleted surface ocean where as the most reduced form of dissolved inorganic nitrogen, it is readily assimilated via metabolic pathways. Challenges in the quantification of ammonium require more sensitive analytical techniques for …