Engineering Commons^™

Electromechanical Modeling Of A Honeycomb Core Integrated Vibration Energy Converter With Increased Specific Power For Energy Harvesting Applications, Nataraj Chandrasekharan

All Dissertations

Innovation in integrated circuit technology along with improved manufacturing processes has resulted in considerable reduction in power consumption of electromechanical devices. Majority of these devices are currently powered by batteries. However, the issues posed by batteries, including the need for frequent battery recharge/replacement has resulted in a compelling need for alternate energy to achieve self-sufficient device operation or to supplement battery power. Vibration based energy harvesting methods through piezoelectric transduction provides with a promising potential towards replacing or supplementing battery power source. However, current piezoelectric energy harvesters generate low specific power (power-to-weight ratio) when compared to batteries that the harvesters …

Configuration Management In Manufacturing And Assembly: Case Study And Enabler Development, Keith Phelan

All Dissertations

The overall goal of this research is to improve the product configuration change management process. The increase in the demand for highly customizable products has led to many manufacturers using mass customization to meet the constantly changing demands of a wide consumer base. However, effectively managing the configurations can be difficult, especially in large manufacturers or for complex products with a large number of possible configurations. This is largely due to a combination of the scope of the configuration management system and the difficulty in understanding how changes to one element of a configuration can propagate through the configuration system. …

Studying The Optimum Design Of Automotive Thermoelectric Air Conditioning, Alaa Attar

Dissertations

The remarkable amount of research being conducted on thermoelectrics gives the impression that this technology will have a bright future in power generation and temperature control systems. At the present time, thermoelectrics is applied widely for temperature control, but has not yet replaced conventional air-conditioning systems due to its lower performance. Currently, approximately 10% of annual vehicle fuel consumption corresponds to the air-conditioning system used to cool the vehicle cabin. Conventional air-conditioning systems cool the entire cabin; however, about 73% of a vehicle’s mileage occurs while the driver is the only occupant. These facts indicate the need for a single …

Tron 2.0 - The Experience, Alecsandro G. Vitale, Alexander W. Billings, Jordan Delfino, William Beechinor, Kelly Rorden

Architectural Engineering

The goal of this senior project was to come up with a structural-engineering-related schematic design for a roller coaster to be installed in Disneyland called TRON 2.0: The Experience. This involved looking at both design processes that we had already learned through our curriculum as well as researching concepts that were previously foreign to us, namely the dynamic application of loads and the effects of fatigue stresses.

A story was established based on the source material: the TRON movies produced by Walt Disney Studios. Thematic elements from the story were used as the basis for design implications that would become …

Co-Design Of Dynamic Real-Time Scheduling And Cooperative Control For Human-Agent Collaboration Systems Based On Mutual Trust, Xiaotian Wang

All Theses

Mutual trust is a key factor in human-human collaboration. Inspired by this social interaction, we analyze human-agent mutual trust in the collaboration of one human and (semi)autonomous multi-agent systems. In the thesis, we derive time-series human-agent mutual trust models based on results from human factors engineering. To avoid both over- trust and under-trust, we set up dynamic timing models for the multi-agent scheduling problem and develop necessary and sufficient conditions to test the schedulability of the human multi-agent collaborative task. Furthermore, we extend the collaboration between one human and multiple agents into the collaboration between multi-human network and swarm-based agents …

Analysis And Synthesis Of Effective Human-Robot Interaction At Varying Levels In Control Hierarchy, David Spencer

All Theses

Robot controller design is usually hierarchical with both high-level task and motion planning and low-level control law design. In the presented works, we investigate methods for low-level and high-level control designs to guarantee joint performance of human-robot interaction (HRI). In the first work, a low-level method using the switched linear quadratic regulator (SLQR), an optimal control policy based on a quadratic cost function, is used. By incorporating measures of robot performance and human workload, it can be determined when to utilize the human operator in a method that improves overall task performance while reducing operator workload. This method is demonstrated …

Industrial Energy Consumption, Benchmarking, And Analysis In The United States, Daniel Maldonado

Mechanical Engineering Undergraduate Honors Theses

The purpose of this paper is to analyze the energy consumption of the industrial sector in the United States, and to identify the tools that can be used to minimize the consumption and improve the energy efficiency of all facilities in the country. The first part of the paper is a historical analysis of the industrial sector energy consumption, where the different energy sources are identified. The second part details different electronic tools that will provide facilities the ability of performing benchmarking, in order to understand their energy performance. Finally, the third part of this paper provides information about the …

A Look At Commercial Building Energy Use And Energy Efficiency Technologies From 1980 To Present, Marvin M. Arroyo

Mechanical Engineering Undergraduate Honors Theses

Energy consumption has increased considerably in the last fifty years as population rises. At the same time, design and efficiency of all equipment used in commercial buildings have changed as well. The purpose of this thesis is to explain how HVAC systems have changed and how they have affected energy consumption. Entities like the US Department of Energy (DOE) and the US Energy Information Administration (EIA) facilitate the data-gathering process by offering databases of energy information from actual monthly energy bills to promote public understanding of energy and its interaction with the economy and the environment. Moreover, in order to …

An Approach To Model Plastic Deformation Of Metallic Plates In Hypervelocity Impact Experiments, Shawoon Kumar Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

Space structures are subjected to micro-meteorite impact at extremely high velocities of several kilometers per second. Similarly, design of military equipment requires understanding of material behavior under extremely high pressure and temperature. Study of material behavior under hypervelocity impact (HVI) poses many challenges since few researchers so far have approached this problem. Material models, equations of the state, and fracture mechanics are not well understood under these conditions.

The objective of this research is to present an approach for studying plastic deformation of metallic plates under HVI conditions. A two-stage light gas gun can be used to simulate these conditions …

The Comparison Of Two Supine Manikins And The Use Of A Shock And Vibration Isolation System For Litter Patients In Air Medical Transport, Karina Karlui Saenz Acosta

UNLV Theses, Dissertations, Professional Papers, and Capstones

Studies show that repeated shock and vibration during aero medical and ground transport are causing patient pain and may be adversely affecting patients’ medical outcome. Patients with spine and head injuries and other severe neurological injuries are the most vulnerable to repeated shock and vibration exposure caused by the vehicle. It is crucial to minimize the effects of these forces on patients during air and ground medical transport. The development of new medical evacuation platforms creates a need to better understand the effects of human exposure to shock and vibration. The use of human subjects to measure whole body vibration …

Simulation Of An Air Cooled Single-Effect Solar Absorption Cooling System With Evacuated Tube Collectors, Mohsen Jahandardoost

UNLV Theses, Dissertations, Professional Papers, and Capstones

Consistently increasing CO2 emission and ozone depletion from synthetic refrigerants are serious environmental issues challenging the scientific community. Absorption cooling systems give scope of utilizing low grade energy source for generating cooling effect. Solar energy is one of these low grade energy sources and with considering the fact that cooling demand increases with the intensity of solar radiation, solar refrigeration has been considered as a logical solution.

This thesis consists of two different simulation stages, in the first stage, a single effect lithium bromide absorption cooling system with constant cooling capacity is modeled and the effect of ambient and generator …

Multi-Level Optimal Design Using Game Theory With Model Updating By Low Discrepancy Sampling, Yanchen Xu

Theses and Dissertations

The Design of Experiment (DOE) based response surface methodology (RSM) is a commonly used technique for solving optimization problems. The traditional DOE method has some shortcomings when used to update the RSM model. This thesis aims to develop a new DOE technique to solve the model updating problems in design optimization. Toward this end, a new DOE based RSM method is proposed to solve this problem by using low-discrepancy sequence method to generate the additional data points needed to update the model to replace the traditional factor and level based DOE method.

Tested on a couple of numerical example problems, …

Numerical Validation Of Cooling Performance Of Phase Change Materials Integrated Into Heat Sinks For Electronics Cooling, Shaimaa Mohamed Abu Ayyan

Theses

This study aims to analyze the cooling performance of phase change materials (PCMs) integrated into metallic heat sinks (HSs) both experimentally and numerically. For the experimental part of the study, a test setup has been constructed to test PCM integrated heat sinks. The heat sinks are prepared as metallic containments having fins with fixed inter-fin spacing. The volume between the heat sink fins is filled with PCM namely: a paraffin wax, salt hydrate-calcium chloride and milk-fat, then the whole system is sealed for testing under various heat loads at 4W, 6W, 8W and 10W. Four modes of operation are experimentally …

Modeling The Feasibility Of Corn Stover Combustion As A Heat Source At Corn Ethanol Plants, Sulekha Tamvada

Theses and Dissertations

Alternative energy sources are of prime interest for most of the nations across the world. Rising fuel prices and depleting petroleum reserves are of serious national and global concern. Bio-fuels if proved feasible for larger scale implementation could become the ideal breakthrough in easing the extensive dependence on fossil fuels and retaining the current engine technology of fossil fuels. Current methods of producing bio-fuels rely heavily on the consumption of non-renewable energy in the production process. Therefore, it is desirable to find renewable alternatives to these non-renewable energy sources.

Although bio-mass based fuels have been tested and proven to be …

Design For Reduction Of Noise Produced By Natural Gas Regulator, Britany L. Chamberlain

Undergraduate Honors Capstone Projects

This document describes the design of a multi-stage restrictive orifice device (MSRO) that serves to reduce the noise produced by a regulator valve. The scope of this document explains the determination of the proper design through the development of analytical models, the design of a test fixture to obtain empirical data, and the corroboration of the models with empirical data to obtain a working solution.

On Subgrid-Scale Physics In The Convective Atmospheric Surface Layer, Khuong Nguyen

All Dissertations

The dynamics of the subgrid-scale (SGS) stress and scalar flux in the convective atmospheric surface layer are studied using field measurements from the Advection Horizontal Array Turbulence Study (AHATS). We extend the array technique previously used to evaluate the SGS velocity and temperature to include measurements of the fluctuating pressure, enabling separation of the resolvable- and subgrid-scale pressure and allowing for the first-ever observations of the pressure covariance terms and the full SGS budgets. Non-dimensional forms of the budget terms are analysed as functions of the surface-layer stability parameter and the ratio of the wavelength of the spectral peak of …

Sound Attenuation Of Fiberglass Lined Ventilation Ducts, Jacob Albright

UNLV Theses, Dissertations, Professional Papers, and Capstones

Sound attenuation is a crucial part of designing any HVAC system. Most ventilation systems are designed to be in areas occupied by one or more persons. If these systems do not adequately attenuate the sound of the supply fan, compressor, or any other source of sound, the affected area could be subject to an array of problems ranging from an annoying hum to a deafening howl. The goals of this project are to quantify the sound attenuation properties of fiberglass duct liner and to perform a regression analysis to develop equations to predict insertion loss values for both rectangular and …

Designing, Building And Testing A Solar Thermoelectric Generation, Steg, For Energy Delivery To Remote Residential Areas In Developing Regions, Yacouba Moumouni

UNLV Theses, Dissertations, Professional Papers, and Capstones

New alternatives and inventive renewable energy techniques which encompass both generation and power management solutions are fundamental for meeting remote residential energy supply and demand today, especially if the grid is quasi-inexistent. Solar thermoelectric generators can be a cost-effective alternative to photovoltaics for a remote residential household power supply. A complete solar thermoelectric energy harvesting system is presented for energy delivery to remote residential areas in developing regions. To this end, the entire system was built, modeled, and then validated with LTspice simulator software via thermal-to-electrical analogy schemes. Valuable data in conjunction with two novel LTspice circuits were obtained, showing …

Effects Of Various Mobility Aids On Lower-Extremity Muscle Activity, Michael Ryan Sanders

Theses and Dissertations

Millions of people each year spend some portion of their time using mobility aids to facilitate periods of non-weight bearing ambulation. The use of these devices changes the loading conditions of the lower extremities, which may result in skeletal muscle adaptations. The purpose of this work was to evaluate the effects of 3 types of mobility aids on lower-extremity muscle activity. Evaluation was based on 1) measured muscle activation signals using electromyography (EMG), and 2) measured joint kinematics and ground reaction forces, which were used to predict muscle forces. 16 healthy subjects (7 female, 9 male), ages 18-27 participated in …

Elucidating The Mechanisms Of Rate-Dependent Deformation At Ambient Temperatures In A Model Metallic Glass, Matthew Bradley Harris

Theses and Dissertations

In this work, the Shear Transformation Zone (STZ) dynamics model is adapted to capture the transitions between different regimes of flow serration in the deformation map of metallic glass. This was accomplished by scaling the STZ volume with a log-linear fit to the strain rate, and also adjusting the activation energy of an STZ with a log-linear fit to maintain constant yield strength at differing strain rates. Twelve simulations are run at each of six different strain rates ranging from 10^-5 to 10⁰ s^-1, and statistics are collected on simulation behavior and shear band nucleation and …

Springback Force Considerations In Compliant Haptic Interfaces, Dallin R. Swiss

Theses and Dissertations

This thesis investigates the potential benefits and challenges of using compliant mechanisms in the design of haptic interfaces. The benefits and challenges are presented with an emphasis on their inherent springback behavior and an active compensation approach. Design criteria for compliant mechanism joint candidates are reviewed and several joints are surveyed. Quantitative calculations of axial stiffness and maximum stress for five candidates are presented. Generalized analytical models of springback force and compensation torque are created to simulate the implementation of each joint candidate in a two degree-of-freedom planar pantograph. We use these models in the development and discussion of an …

Evaluation Of Two-Phase Evaporation Pressure Drop Correlations For Low Refrigerant Mass Flux., Anna Fenko

Electronic Theses and Dissertations

This study was conducted to evaluate three currently popular two-phase pressure drop models for extremely low velocity refrigerant flow through smooth circular evaporators in household refrigeration systems. Experimental data was taken at mass fluxes under 70 kg/m²s for two refrigerants, R134A and R600A, internal diameters of aluminum evaporators ranging from 0.186 to 0.317 inches, U-bend internal radii ranging from 0.342 to 0.750 inches in horizontal and vertical orientations of evaporators. The geometry of the samples closely resembled a commonly used serpentine shape with multiple U-bends experiencing both, up- and down-flow of the refrigerant. Two empirical models, Müller-Steinhagen & …

Application Of The Aeroacoustic Analogy To A Shrouded, Subsonic, Radial Fan., Bryan Buccieri

Electronic Theses and Dissertations

A study was conducted to investigate the predictive capability of computational aeroacoustics with respect to a shrouded, subsonic, radial fan. A three dimensional unsteady fluid dynamics simulation was conducted to produce aerodynamic data used as the acoustic source for an aeroacoustics simulation. Two acoustic models were developed: one modeling the forces on the rotating fan blades as a set of rotating dipoles located at the center of mass of each fan blade and one modeling the forces on the stationary fan shroud as a field of distributed stationary dipoles. Predicted acoustic response was compared to experimental data. The blade source …

Characterizing The Effective Bandwidth Of Nonlinear Vibratory Energy Harvesters Possessing Multiple Stable Equilibria, Meghashyam Panyam Mohan Ram

All Dissertations

In the last few years, advances in micro-fabrication technologies have lead to the development of low-power electronic devices spanning critical fields related to sensing, data transmission, and medical implants. Unfortunately, effective utilization of these devices is currently hindered by their reliance on batteries. In many of these applications, batteries may not be a viable choice as they have a fixed storage capacity and need to be constantly replaced or recharged. In light of such challenges, several novel concepts for micro-power generation have been recently introduced to harness, otherwise, wasted ambient energy from the environment and maintain these low-power devices. Vibratory …

Springback Force Considerations In Compliant Haptic Interfaces, Dallin R. Swiss

Theses and Dissertations

This thesis investigates the potential benefits and challenges of using compliant mechanisms in the design of haptic interfaces. The benefits and challenges are presented with an emphasis on their inherent springback behavior and an active compensation approach. Design criteria for compliant mechanism joint candidates are reviewed and several joints are surveyed. Quantitative calculations of axial stiffness and maximum stress for five candidates are presented. Generalized analytical models of springback force and compensation torque are created to simulate the implementation of each joint candidate in a two degree-of-freedom planar pantograph. We use these models in the development and discussion of an …

Optimization Of Titanium Liquid/Gas Diffusion Layers In Proton Exchange Membrane Electrolyzer Cells, Stuart Mccoy Steen

Masters Theses

Polymer electrolyte membrane electrolyzer cells (PEMECs), which are reverse PEM fuel cells (PEMFCs), are effective energy storage medium by producing hydrogen/oxygen from water using electricity from renewable energy sources. This is due in part because of its efficiency, high energy density, compact design, and large capacity. In a PEMEC, a liquid/gas diffusion layer (LGDL) is located between the catalyst layer and the current distributing flow field. The LGDL is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. Carbon materials (carbon paper or carbon cloth), typically used …

Evaluation Of Fuel Flow Measurement Uncertainty In A Turbine Engine Test Cell, Paul Andrew Wright

Masters Theses

The evaluation of measurement uncertainty is an essential part of measurement and data analysis. Measurement uncertainty is itself a measure of the “goodness” of the measured data and helps the analyst to make decisions based on the data. In the turbine engine testing world, accurate measurement of fuel flow is critical. Specific fuel consumption is a combination of thrust and fuel flow and is used to calculate the allowable payload and range of an aircraft as well as the cruising speed. Naturally, test customers (engine manufacturers, aircraft designers, and operators) are very sensitive to the accuracy of fuel flow measurement. …

Extending The Lean Limit Of Methane-Air Mixtures By Oxygen, Nitrogen And Carbon Dioxide Injection In The Gap Of The Spark Plug’S Electrodes, Artem Alexandrov Temerev

Masters Theses

An experimental investigation is carried out to investigate the feasibility of extending the lean limit for methane–air mixtures by injecting oxygen and other gases such as nitrogen and carbon dioxide in the area between spark plug electrodes. Additionally, the effect of oxygen injection on exhaust gas recirculation (EGR) is investigated. The pressure in the chamber and the equivalence ratio of the mixture are varied from 0.35 MPa to 1.03 MPa and 0.46 to 1.0, respectively. Delco 12620540 spark plug is used as the ignition source and the gas injection into spark plug gap is accomplished through a 0.159-cm OD stainless …

Design Of A Meta-Material With Targeted Nonlinear Deformation Response, Zachary Satterfield

All Theses

The M1 Abrams tank contains track pads consist of a high density rubber. This rubber fails prematurely due to heat buildup caused by the hysteretic nature of elastomers. It is therefore desired to replace this elastomer by a meta-material that has equivalent nonlinear deformation characteristics without this primary failure mode. A meta-material is an artificial material in the form of a periodic structure that exhibits behavior that differs from its constitutive material. After a thorough literature review, topology optimization was found as the only method used to design meta-materials. Further investigation determined topology optimization as an infeasible method to design …

Experimental Investigation Of Heat Leakage And Air Leakage In Domestic Refrigerators, Shervin Shoai Naini

All Theses

The optimization of the energy consumption in household refrigerators should consider the influence of the gasket which determines the heat transfer and air infiltration rate. In this research project, engineering methods are developed to evaluate the heat leakage due to the gasket and air infiltration in domestic refrigerators. In the first study, experimental and numerical approaches are applied to evaluate the gasket heat transfer based on the “Reverse Heat Load Method”. The main objective is to find the effective heat leakage with the dimensions of energy leakage per gasket length per temperature difference (W/m.K). An insulated cubic box with a …