Science and Mathematics Education Commons^™

Building, Refining & Defining Stem Learning Outcomes: K-16 Implications, Richard A. Duschl

Interdisciplinary STEM Teaching & Learning Conference (2012-2019)

The July 2012 release of the National Research Council Framework for K-12 Science Education: Practices, Crosscutting Concepts and Core Ideas heralds ‘a new vision of science in education.’ The Framework sets out a comprehensive agenda for the reform of science and engineering education coordinated around 3 Dimensions: Science & Engineering Practices, Crosscutting Concepts, and Core Ideas. While the Framework’s central mission is to impact K-12 education through implementation of the Next Generation Science Standards, there are important but less understood implications for higher education, informal science education and publics’ understandings of science communication efforts. In this talk, I will provide …

Using Plankton Imaging Technology And Computer Science For Biological Oceanographic Advancement And Education, Adam T. Greer

Adam T. Greer

Oceanography is an inherently interdisciplinary subject that combines observations of physics, biology, chemistry, and their interactions. While most physical and chemical measurements can be made on small scales (cm to m) through the use of sensors (temperature, salinity, pH, etc.), traditional tools to understand the biology of the ocean have only allowed for coarse sampling resolution (i.e., plankton nets sample large portions of the water column). New imaging technology enables the biological component of the ocean to be sampled on the same scale as the physical and chemical, allowing scientists to finally address the interactions among different oceanographic processes. Image …

A Multicultural Comparison Of Engineering Students: Implications To Teaching And Learning, Zaki Shkair Seddigi, Luiz Fernando Capretz, David House

Luiz Fernando Capretz

Problem statement: Personality considerations have become increasingly important in recent years, but studies involving the personality characteristics of engineers have been scarcely reported. Engineers today are expected to have a broader range of skills than in the recent past because users are now equally concerned with the technical as well as the personal services provided by engineers. Approach: A multicultural personality profile of engineering students had been presented in this study. The MBTI was used as an instrument to sort personality types of engineering students at both King Fahd University of Petroleum and Minerals in Saudi Arabia and University of …

An Open Prototype For Educational Nanosats: Increasing National Space Engineering Productivity Via A Low-Cost Platform, Jeremy Straub

Jeremy Straub

The Open Prototype for Educational NanoSats (OPEN) is poised to allow a dramatic increase in the number of students, worldwide, that have the opportunity to participate in hands-on spacecraft development. It is designed to facilitate the formation of CubeSat development programs via providing a publically-available set of spacecraft design documents, implementation and testing plans. These documents should allow the creation of a 1-U CubeSat with a parts budget of approximately $ 5,000. This allows spacecraft development to be incorporated in regular curriculum and supported from teaching (as opposed to research) funds.

The Openorbiter Program: Intrepreneurship, Entrepreneurship And Innovation, Jeremy Straub

Jeremy Straub

The University of North Dakota’s OpenOrbiter program is providing an interdisciplinary learning experience for students from numerous STEM and non-STEM fields. OpenOrbiter allows student participants to experience not just the engineering and other technical aspects of the space program, it also involves students from diverse, non-STEM fields (including communications, entrepreneurship, management, visual arts, public policy and English). Traditional STEM fields such as mathematics, physics, electrical engineering, mechanical engineering, computer science and technology are also well represented. Students from specially programs at the University of North Dakota including atmospheric sciences, Earth System Sciences and Policy, aviation, Space Studies and Air Traffic …

The International Trafficking In Arms Regulations: Precluding Innovation In Academic Spacecraft Engineering — Or Are They?, Jeremy Straub, Joe Vacek

Jeremy Straub

Government regulations and uncertainty about their enforcement can be a significant barrier to innovation. In business, it is undesirable to consume time and other resources developing a product that cannot be sold or which requires navigating significant bureaucracy for each sale. In academ-ia, where limited funding is available prior to the submission of a grant pro-posal and receipt of an award, proposal-stage compliance costs can derail a project long before it begins. This paper reviews the International Traffick-ing in Arms Regulations (ITAR) and their impact on spacecraft research in academia, private research labs and industry. It reviews the exemptions available, …

Risk Analysis & Management In Student-Centered Spacecraft Development Projects, Jeremy Straub, Ronald Fevig, James Casler, Om Yadav

Jeremy Straub

Student involvement in any engineering project introduces an element of risk. This risk is particularly pronounced with small spacecraft projects, as a failure of the spacecraft on-orbit can result in a complete failure of the mission. However, student involvement in these projects is critical to allow research aims to be accomplished, in a university setting, and to train the next generation of spacecraft engineering professionals. The nature of risks posed by student involvement is discussed and a framework for assessing and mitigating these risks presented.

Theoretical Foundations For Effective Stem Learning Environments, Aran W. Glancy, Tamara J. Moore

School of Engineering Education Working Papers

No abstract provided.

Examining The Effects Of Computational Tools On Students' Conceptual Understanding Of Thermodynamics Of Material Concepts And Representations, Oyindamola Oluwatimi

Open Access Theses

Technology is becoming a more critical agent for supporting learning as well as research in science and engineering. In particular, technology-based tools in the form of simulations and virtual environments support learning using mathematical models and computational methods. The purpose of this research is to: (a) measure the value added in conveying Thermodynamics of materials concepts with a blended learning environment using computational simulation tools with lectures; and (b) characterize students' use of representational forms to convey their conceptual understanding of core concepts within a learning environment that blended Gibbs computational resource and traditional lectures.

A mix-method approach was implemented …

Influence Of Stem Education And Technology In Selecting Food And Agriculture Careers, Joan Hegerfeld-Baker

Electronic Theses and Dissertations

Currently market forces identify a growing need for professionals in food safety related careers. The investigation studied influential factors guiding students to choose career paths. Careers connected to the safety of the food supply require professionals with undergraduate and graduate degrees related to science, technology, engineering or math (STEM). Preparing and attracting students to post-secondary institutions needs greater attention to meet the demands of the food and agriculture industry. The investigation focused on college students and high school teachers. Students in three colleges (Arts and Sciences, Agriculture and Biological Sciences, and Education and Human Sciences) offering STEM and non-STEM majors …

Product Lifecycle Management: Measuring What Is Important - Product Lifecycle Implementation Maturity Model, Abram Walton, Cynthia Tomovic, Michael Grieves

STEMPS Faculty Publications

Industry reports that benefits of PLM are difficult to assess because the same benefit can be expressed as a function of time, cost, quality, or any combination. Based on a review of the PLM literature in an earlier study, a PLM Process Model and an initial list of PLM related metrics was generated and later confirmed through interviews with experienced PLM users. In the current study, the original PLM Process Model was refined and the list of metrics was subjected to an exploratory factor analysis in which specific metrics were found to be related to one of four factors: Inputs, …

Test 2078: John Deere 6125m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: 913 Challenger Mt525d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S954 New Holland T5.115, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S953 New Holland T5.105, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S952 New Holland T5.95, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S951 Case-Ih Farmall 115u, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S950 Case-Ih Farmall 105u, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S949 Case-Ih Farmall 95u, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S947 New Holland T4.105, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S946 New Holland T4.95, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S930 John Deere 6125r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S929 John Deere 6115r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S928 John Deere 6105r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S927 Challenger Mt545d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S926 Challenger Mt535d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S925 Challenger Mt525d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S924 Massey Ferguson 7618, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S923 Massey Ferguson 7616, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S922 Massey Ferguson 7615, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …