Dynamics Simulation Of Food Sorting Robot,
2015
School of Mechanical Engineering, Jiangnan University, Wuxi, Jiangsu 214122, China; Jiangsu Province Key Laboratory of Advanced Food Manufacturing Equipment and Technology, Wuxi, Jiangsu 214122, China
Dynamics Simulation Of Food Sorting Robot, Jiang Yi, Li Zhengyang, Ying Zaien, Ping Xueliang
Food and Machinery
According to the structural features of food sorting robots with six degrees of freedom, kinetic theory analysis was carried out by using Lagrange approach. Virtual prototype modeling was established, and the curves of angle, angular velocity, angular acceleration, moment and power were obtained by rigid body dynamics simulation within ADAMS. The results showed that the robot had a good motion stability and dynamic response, which in addition provide a theoretical basis for motor selection. Coupled dynamics simulation was also carried out by SimDesigner, which demonstrates the rationality of the manipulate design.
Motion Simulation Analysis Of Yield Monitor Device On Tomato Harvester Based On Solidworks Motion,
2015
Machinery and Electricity Engineering College, Shihezi University, Shihezi, Xinjiang 832000, China
Motion Simulation Analysis Of Yield Monitor Device On Tomato Harvester Based On Solidworks Motion, Yuan Changfu, Zhang Hongwen, Ma Wanli, Wang Lei, Chen Mingchang
Food and Machinery
In order to study the influence of the initial velocity of tomato on weighing accuracy of yield monitor, a motion simulation model of yield monitor on tomato harvester was established. The tomato on the harvester was chosen for the research object. The analysis of motion process was completed by applying a method combined the motion theoretical analysis and motion simulation analysis. The results showed that in order to avoid the accuracy of the motion symmetry of tomato, tomato in the range of the load belt before entering the weighing belt is relatively static, and the initial movement speed of tomato …
Simulation And Optimization Of Spray In Eggs Cleaning System,
2015
Dongguan Polytechnic, Dongguan, Guangdong 523808, China;Guangdong University of Technology, Guangzhou, Guangdong 510006, China
Simulation And Optimization Of Spray In Eggs Cleaning System, Chen Yonggang, Yan Qiusheng
Food and Machinery
No abstract provided.
Simulation Analysis On A Stuffing Machine Molding Cutter Based On Solidworks,
2015
Anhui Techincal College on Water Rresoures and Hydroelectric Power, Hefei, Anhui 231603, China
Simulation Analysis On A Stuffing Machine Molding Cutter Based On Solidworks, Xu Huajun, Tang Ping
Food and Machinery
No abstract provided.
Preparation And Experimental Study On Online Removing Inpurities And Sorting Device In Tomato Sauce Factory,
2015
Xinjiang Institute of Engineering, Urumqi, Xinjiang 830091, China
Preparation And Experimental Study On Online Removing Inpurities And Sorting Device In Tomato Sauce Factory, Liu Zhiyong, Yang Jiapeng, Liu Junxia, Wang Xiaohui, Liu Wen, Yuan Yong, Sun Tianlong, Ha Iling
Food and Machinery
Tomato sauce factory impurities removing mainly rely on a large number of manpower. It is not only time wasting, low collecting effect, and the food hygiene is also difficult to secure. The study developed an automatical removing impurity sorting device which can alternative artificial clean up the weeds and impurity. The device was composed of the bracket, roller, non-slip pattern conveyor belt, side baffle, baffle plate, motor, reducer, photoelectric sensor and automatic control system. The experimental analysis demonstrated that when removing impurity sorting machine working angle between 25° to 45°, the device selected fruit rate and the rate of removing …
An Apple Quality Grading System Based On Motion Controller,
2015
Inner Mongolia University for the Nationalities College of Mechanical Engineering College, Tongliao, Inner Mongolia 028000, China
An Apple Quality Grading System Based On Motion Controller, Wu Xiaoqiang, Huang Yunzhan, Zhao Yongjie
Food and Machinery
A kind of apple quality grading system is designed based on motion controller and machine vision system, the system includes the detection module, image acquisition and processing module motion control module and execution module and other components. The operation is simple and accuracy is high, and it can realize the automation of apple quality grading, improve the labor efficiency. The non-contact structure is applied, the structure can overcome the previous mechanical damage caused by the contact of apple. It can ensure the quality after the apple classification. Research shows that this system is high reliability, good openness, grading error less …
Design Of Temperature Remote Monitoring System For Beer Pasteurization Machine Based On Gsm,
2015
Zhengzhou Technical College, Zhengzhou, Henan 450121, China
Design Of Temperature Remote Monitoring System For Beer Pasteurization Machine Based On Gsm, Zhao Fang, Zheng Xiaoxi, Qi Zegang
Food and Machinery
The key factor which affects the taste and quality of beer is beer pasteurization machine spray water temperature. The system, which is used to beer pasteurization machine temperature’s automatic control and remote monitoring, is deigned based on MSP430 and GSM wireless communications. The temperature detection adopts DS18B20 digital temperature sensor instead of the traditional platinum RTD, and the MSP430 is main controller with low-power and strong anti-interference ability. The control system can adjust each zone temperature of pasteurization machine in real-time, and the real-time temperature of each zone and abnormal temperature alarm information can be send to the monitoring center …
Design Of A Pitting And Slicing Device For Jujube,
2015
Department of Mechanical and Electrical Engineering, Shaanxi University of Science and Technology, Xian, Shaanxi 710021, China
Design Of A Pitting And Slicing Device For Jujube, Wen Huaixing, Zhou Gaimei, Shi Pengtao
Food and Machinery
A kind of pitting and slicing integrated device was designed. The material feeding was completed by material panel, hairbrush, slider-crank mechanism; The positioning clamp for jujube was accomplished by a flexible device connected with spring; The pitting can achieved by trough type cam mechanism and slider-crank mechanism; Use the Geneva mechanism to finish the intermittent feeding and intermittent rotating of pitting panel and slicing panel; The slicing was fulfilled by the fixed blade and rotated slicing panel. The results show that the device can meet the requirements of deep processing for jujube, its broken rate was lower than 5%.
Development Of Green Walnut Peeling Machine Block,
2015
College of Mechanical and Electrical Engineering, Shaanxi University of Science & Technology, Xian, Shaanxi 710021, China
Development Of Green Walnut Peeling Machine Block, Wu Dongze, Zheng Jiahong, Liang Jinsheng, Niu Shuoya
Food and Machinery
Combined with the green walnut peel machine exist peeling the peel into a drip shape, design a kind of economical and practical green walnut peel block machine on the study of green walnut peel principle, which has carried on the design of cylinder, peeling mechanism. The structure of the machine is simple, convenient, economic, and safety. The efficiency of green walnut peel is about 98.33%，and the damage rate is 2%. It reduces the machine corrosion by the green peel juice from the peeling process and environmental pollution, which has a very good development prospect.
Design And Research On Compliant Manipulator For Shrimps Head Cutting,
2015
Mechanic and Electronics College, Agriculture University of Hebei, Baoding, Hebei 071001, China
Design And Research On Compliant Manipulator For Shrimps Head Cutting, Han Cui, Zhang Xiuhua, Li Na, Wang Zehe, Yi Jinggang
Food and Machinery
Designed a compliant manipulator device to cut shrimp head, and used the flexible deformation materials to complete the trajectory. It is proved the best by experiments that the knife went along the trajectory from the back force of shrimp to head. Not only can achieve the best results, but also gains access to a higher headless shrimp yield and good sensory quality. Three dimensional modeling was conducted by using Solidworks software, and the motion simulation by ADAMS software， Through the manufacture and experiments of the compliant manipulator, the headless shrimp yield was improved to 70.78%. The device was simple and …
A 3d-Print Pen Based On Principles Of PistonS Continuous Working,
2015
College of Mechanical and Energy Engineering, Ningbo Institute of Technology, Zhejiang University, Ningbo, Zhejiang 315100, China; College of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan, Shanxi 030024, China
A 3d-Print Pen Based On Principles Of PistonS Continuous Working, Wang Jinlei, Wang Xiaojun, Ren Yantao
Food and Machinery
Introduced the structural characteristics of a 3D-print pen based on the principles of Pistons continuous working ,and then established the mathematical model of the system. Compared with the other 3D-print pen, its print materials changed into liquid material ,such as liquid chocolate, from ABS plastic. The 3D-print pen had the advantages of reasonable design, convenient operation, and extended print material range. These were benefit for development and design of the other 3D-print pen.
Design And Study On Dough Wobble-Plate Machine,
2015
College of Mechanical, North China University of Water Resources and Electric Power, Zhengzhou, Henan 450011, China
Design And Study On Dough Wobble-Plate Machine, Hao Yongxing, Zhang Minghui, Ma Ziling, Ma Shaodan
Food and Machinery
A wobble-plate machine of dough that base on existed normal machine is developed to satisfy many requirements including safety and hygiene, efficiency and lower cost in production line of steamed bread. Design scheme of the whole machine is made according to the working environment , and a 3D model is built based on Pro/E. This machine consists of manipulator which can complete grasp, separate, place and press, frame and driving cylinder etc. According to its basic construction and working principles, driving plan is designed, flow chart and pneumatic system schematic can also be shown. The virtual simulation experiment in ADAMS …
Study On A Device For Recycling Of Canteen Dishware,
2015
School of Machinery and Automation, Wuhan University of Science and Technology, Wuhan, Hubei 430081, China
Study On A Device For Recycling Of Canteen Dishware, Xiao Bing, Zou Guangming, Zhang Xinfeng, Yang Xing, Cao Kang
Food and Machinery
A device for the recycling of canteen dishware is developed. The device consists of a mechanical system and a control system. The mechanical system includes three parts: a conveyor for dishware, a rotating electromagnetic manipulator and a processor. Wherein, the conveyor for dishware is used as a substitute for cutlery collecting vehicle and transmits dishware to the processor; the rotating electromagnetic manipulator achieves to transfer dishware from the conveyor for dishware to the processor, and meanwhile pours the residue in dishware; lastly the processor classifies and collects dishware. The entire device achieves to replace the human collecting, a cleaning and …
Optimization And Improvement Of Humidition Of Tobacco System,
2015
Longyan Tobacco Industrial CO., Ltd., Longyan, Fujian 364021, China
Optimization And Improvement Of Humidition Of Tobacco System, Su Fubin, Zhang Wei
Food and Machinery
In order to solve the problem of high tobacco temperature upstream cylinder and irrational design of deflector, which caused much tobacco break, tobacco stick and wet tobacco mass, the Humidition of Tobacco is optimized and improved by adding a low pressure blower for cooling belt, and improving cylinder deflector.The results of application showed that the tobacco temperature upstream cylinder could be fallen from 65 ℃ to 40 ℃ with blower, 590 full pressure, work at 15 Hz, and the tobacco break is little, tobacco stick and wet tobacco mass were also descend. The transformations reach the goal of improving product …
Application Of Reverse Engineering Technology In Food Machine,
2015
Shanxi Institute of Mechanical and Electronic Engineering, Changzhi, Shanxi 046011, China
Application Of Reverse Engineering Technology In Food Machine, Li Fenxia, Yang Jieming
Food and Machinery
In the CAM guide development process of automatic wonton machine, presents a new method of digital design and manufacturing of complex parts based on reverse engineering. The reverse engineering technology was used to realize the product development by the study of product data acquisition, the point cloud processing, surface fitting, surface parameterization modeling, digital manufacturing stages. Established the strategy of data acquisition, put forward the different method of point cloud processing, designed the scheme of surface parameterization modeling, and inspected surface quality and manufacturing process using modern means. Solved the time-consuming traditional top-down design, test difficulty and high cost, and …
Design Of Processing Docking Platform Of Food Machine Based On Three Dimensional Image Calibration,
2015
Chongqing College of Electronic Engineering, Chongqing 401331, China
Design Of Processing Docking Platform Of Food Machine Based On Three Dimensional Image Calibration, Fu Wen, Li Xiang
Food and Machinery
Docking process occurs in food machinery processing, the accuracy of the docking process can directly affect the later process successfully. In order to solve the problem of low docking accuracy which depends only on the signal sensors, the design method of processing docking platform based on three dimensional image is afforded, by analyzing the influence of three-dimensional image mechanical calibration principle of docking process, and acquiring the feature points in the optimal docking area of a large number of the three dimensional docking images which can be chosen based on local brightness, ratio of contrast, information of structure, the three …
Effects Of Grating Moire Fringe On Food Packaging Printing,
2015
Haikou College of Economics, Haikou, Hainan 571127, China
Effects Of Grating Moire Fringe On Food Packaging Printing, Zheng Li
Food and Machinery
Combined with grating in food packaging materials, optical properties and the halftone image and network technology, studied the anti-counterfeiting grating moire fringe of printing forming rules. Explored the new technology of food packaging, and adopt the method of theoretical calculation of moire fringe formation and distribution characteristics. And the analysis and calculation are verified by experiments. According to the actual situation of food packaging grating printing, and the laws of the moire fringe formation, the results showes that choosing suitable grating and screen printing and network Angle/grating line ratio, can effectively eliminate or weaken the influence of the moire fringe.
Preparation And Research On Microwave Modified Blended Protein Film,
2015
College of Food Science, Northeast Agricultural University, Harbin, Heilongjiang 150030, China
Preparation And Research On Microwave Modified Blended Protein Film, Wang Na, Gao Yuzhe, Wang Qingfeng, Xiao Zhigang, Wang Peng, Li Zhe
Food and Machinery
With the soy protein isolated(SPI) and zein as the raw material, through modified the zein by microwave to make the microwave modified blended protein film. Selecting the protein liquid volume ratio of SPI and modified zein, ethanol content, pH of film-forming liquid and water bath temperature as studying factors, the mechanical properties of blended film (breaking strength and fracturing distance) as targets for single factor experiment was studied. And the microstructure, thermal characteristics and FT—IR of the microwave modified blended protein film were also studied, which was obtained by the best ultrasonic film-forming conditions. The results showed that the blended …
Changes Of Rice Bran Glutelin Functional Properties Caused By Rancidity During Storage,
2015
College of Food Science and Engineering, Center South University of Forestry and Technology, Changsha, Hunan 410004, China; National Engineering Laboratory for Rice and By-product Deep Processing, Changsha, Hunan 410004, China
Changes Of Rice Bran Glutelin Functional Properties Caused By Rancidity During Storage, Wu Wei, Ye Jianfen, Cai Yongjian, Lin Qinlu
Food and Machinery
Fresh rice bran which stored in a condition of 25 ℃ and 85% of relative humidity for different period were used to prepare different rancid extent of rice bran. Rice bran glutelin were prepared after defatting of rice bran, and effects of rice bran rancidity on the functional properties of rice bran glutelin were investigated. The results indicated that rice bran glutelin carbonyl content increased as storage time increased, which indicated that storage of rice bran lead to oxidation of rice bran glutelin. Solubility of rice bran glutelin decreased by 40% as storage time increased. As storage time increased, water …
Effect Of Sodium Alginate Composite Film On Preservation Of Shelled Seed Of Xiang Lotus,
2015
Department of Food and Biological Engineering, Changsha University of Science and Technology, Changsha, Hunan 410114, China; Hunan Provincial Engineering Technology Research Center of Aquatic Food Resources Processing, Changsha University of Science and T
Effect Of Sodium Alginate Composite Film On Preservation Of Shelled Seed Of Xiang Lotus, Li Xianghong, Wang Jianhui, Jin Na, Liu Yongle, Yu Jian, Wang Faxiang
Food and Machinery
The effect of different composite films (citric acid, EDTA-Na2 and alginate) on preservation of fresh lotus was studied. Soluble solids content (SSC), net photosynthetic rate, polyphenol oxidase (PPO) and peroxidase (POD) activities of fresh lotus seeds and color variation of fresh lotus shell were investigated at the storage temperature of 4 ℃. Preservative formula with better preservation effect was selected through orthogonal design. The results showed that the best formula of the composite film was composed of 0.3% of citric acid, 0.015% of EDTA-Na2 and 2.5% of alginate, which improved the quality of fresh lotus significantly. The composite …
