Plasma and Beam Physics Commons^™

Analysis Of A 750 Mhz Srf Dipole Cavity, Alejandro Castilla, J. R. Delayen

Physics Faculty Publications

There is a growing interest in using rf transverse deflecting structures for a plethora of applications in the current and future high performance colliders. In this paper, we present the results of a proof of principle superconducting rf dipole, designed as a prototype for a 750 MHz crabbing corrector for the Medium Energy Electron-Ion Collider (MEIC), which has been successfully tested at 4.2 K and 2 K at the Jefferson Lab’s Vertical Testing Area (VTA). The analysis of its rf performance during cryogenic testing, along with Helium pressure sensitivity, Lorentz detuning, surface resistance, and multipacting processing analysis are presented in …

Secondary Electron Yield Of Electron Beam Welded Areas Of Srf Cavities, M. Basovic, S. Popovic, M. Tomovic, L. Vuskovic, A. Samolov, F. Cuckov

Physics Faculty Publications

Secondary Electron Emission (SEE) is a phenomenon that contributes to the total electron activity inside the Superconducting Radiofrequency (SRF) cavities during the accelerator operation. SEE is highly dependent on the state of the surface. During electron beam welding process, significant amount of heat is introduced into the material causing the microstructure change of Niobium (Nb). Currently, all simulation codes for field emission and multipacting are treating the inside of the cavity as a uniform, homogeneous surface. Due to its complex shape and fabricating procedure, and the sensitivity of the SEE on the surface state, it would be interesting to see …

Design And Prototyping Of A 400 Mhz Rf-Dipole Crabbing Cavity For The Lhc High-Luminosity Upgrade, S. U. De Silva, J. R. Delayen, H. Park, Z. Li, T. H. Nicol

Physics Faculty Publications

LHC High Luminosity Upgrade is in need of two crabbing systems that deflects the beam in both horizontal and vertical planes. The 400 MHz rf-dipole crabbing cavity system is capable of crabbing the proton beam in both planes. At present we are focusing our efforts on a complete crabbing system in the horizontal plane. Prior to LHC installation the crabbing system will be installed for beam test at SPS. The crabbing system consists of two rf-dipole cavities in the cryomodule. This paper discusses the electromagnetic design and mechanical properties of the rf-dipole crabbing system for SPS beam test.

Progress On The Design Of The Polarized Medium Energy Electron Ion Collider At Jlab, F. Lin, S. A. Bogacz, P. D. Brindza, A Camsonne, E. Daly, Y. S. Derbenev, D. Douglas, R. Ent, D. Gaskell, R. L. Geng, A. Castilla, J. R. Delayen, C. E. Hyde, K. Park

Physics Faculty Publications

The Medium-energy Electron Ion Collider (MEIC) at JLab is designed to provide high luminosity and high polarization needed to reach new frontiers in the exploration of nuclear structure. The luminosity, exceeding 10³³ cm^-2s⁻¹ in a broad range of the center-of-mass (CM) energy and maximum luminosity above 10³⁴ cm^-2s⁻¹, is achieved by high-rate collisions of short small-emittance low-charge bunches made possible by high-energy electron cooling of the ion beam and synchrotron radiation damping of the electron beam. The polarization of light ion species (p, d, ³He) can be easily preserved and …

Effects Of Plasma Processing On Secondary Electron Yield Of Niobium Samples, M. Basovic, S. Popovic, M. Tomovic, L. Vuskovic, A. Samolov, F. Cuckov

Physics Faculty Publications

Impurities deposited on the surface of Nb during both the forming and welding of accelerator cavities add to the imperfections of the sheet metal, which then affects the overall performance of the cavities. This leads to a drop in the Q factor and limits the maximum acceleration gradient achievable per unit length of the cavities. The performance can be improved either by adjusting the fabrication and preparation parameters, or by mitigating the effects of fabrication and preparation techniques used. We have developed the experimental setup to determine Secondary Electron Yield (SEY) from the surface of Nb samples. Our aim is …

Hom And Impedance Study Of Rf Separators For Lcls-Ii, S. U. De Silva, B.R.P. Gamage, R. G. Olave, J. R. Delayen, G. A. Krafft, T. Satogata

Physics Faculty Publications

The LCLS-II upgrade requires an rf spreader system to guide bunches into a switchyard delivering beam to two undulators and the primary beam dump. The beam pattern therefore needs a 3-way beam spreader. An rf deflecting cavity concept was proposed that includes both superconducting and normal conducting options. We characterize the higher order modes (HOM) of these rf separator cavities and evaluate beam dynamics effects due to potential HOM excitation. This study includes both short term wake and multi-bunch effects.

Measurement Of The Structure Function Of The Nearly Free Neutron Using Spectator Tagging In Inelastic ²H(E,E'Pˢ) X Scattering With Clas, S. Tkachenko, S. E. Kuhn, J. Zhang, K. P. Adhikari, M. J. Amaryan, A. Klein, S. Koirala, M. Mayer, L. Zana, Clas Collaboration

Physics Faculty Publications

Background: Much less is known about neutron structure than that of the proton due to the absence of free neutron targets. Neutron information is usually extracted from data on nuclear targets such as deuterium, requiring corrections for nuclear binding and nucleon off-shell effects. These corrections are model dependent and have significant uncertainties, especially for large values of the Bjorken scaling variable x . As a consequence, the same data can lead to different conclusions, for example, about the behavior of the d quark distribution in the proton at large x .

Purpose: The Barely Off-shell Nucleon Structure experiment at Jefferson …

Employing Twin Crabbing Cavities To Address Variable Transverse Coupling Of Beams In The Meic, A. Castilla, V. S. Morozov, T. Satogata, J. R. Delayen

Physics Faculty Publications

The design strategy of the Medium Energy Electron-Ion Collider (MEIC) at Jefferson Lab contemplates both matching of the emittance aspect ratios and a 50 mrad crossing angle along with crab crossing scheme for both electron and ion beams over the energy range (√s=20-70 GeV) to achieve high luminosities at the interaction points (IPs). However, the desired locations for placing the crabbing cavities may include regions where the transverse degrees of freedom of the beams are coupled with variable coupling strength that depends on the collider rings’ magnetic elements (solenoids and skew quadrupoles). In this work we explore the feasibility of …

Higher Order Mode Damping In Superconducting Spoke Cavities, C. S. Hopper, J. R. Delayen

Physics Faculty Publications

Parasitic higher order modes (HOMs) can be severely detrimental to the performance of superconducting cavities. For this reason, the mode spectrum and beam coupling strength must be examined in detail to determine which modes must be damped. One advantage of the spoke cavity geometry is that couplers can be placed on the outer body of the cavity rather than in the beam line space. We present an overview of the HOM properties of spoke cavities and methods for suppressing the most harmful ones.

Cryogenic Testing Of High-Velocity Spoke Cavities, C. S. Hopper, Hyekyoung Park, J. R. Delayen

Physics Faculty Publications

Spoke-loaded cavities are being investigated for the high-velocity regime. The relative compactness at low-frequency makes them attractive for applications requiring, or benefiting from, 4 K operation. Additionally, the large velocity acceptance makes them good candidates for the acceleration of high-velocity protons and ions. Here we present the results of cryogenic testing of a 325 MHz, β0 = 0.82 single-spoke cavity and a 500 MHz, β0 = 1 double-spoke cavity.

Fabrication And Measurements Of 500 Mhz Superconducting Double Spoke Cavity, Hyekyoung Park, C. S. Hopper, J. R. Delayen

Physics Faculty Publications

The 500 MHz double spoke cavity has been designed for a high velocity application such as a compact electron accelerator at Center for Accelerator Science at Old Dominion University and is being built at Jefferson Lab. The geometry specific to the double spoke cavity requires a variety of tooling and fixtures. Also a number of joints are expected to make it difficult to maintain the geometric deviation from the design minimal. This paper will report the fabrication technique, resulting tolerance from the design, and comparison between the measurements and simulations.

Plasma Processing Of Large Curved Surfaces For Superconducting Rf Cavity Modification, J. Upadhyay, Do Im, S. Popovic, A. M. Valente-Feliciano, L. Phillips, L. Vušković

Physics Faculty Publications

Plasma-based surface modification of niobium is a promising alternative to wet etching of superconducting radio frequency (SRF) cavities. We have demonstrated surface layer removal in an asymmetric nonplanar geometry, using a simple cylindrical cavity. The etching rate is highly correlated with the shape of the inner electrode, radio-frequency (rf) circuit elements, gas pressure, rf power, chlorine concentration in the Cl₂/Ar gas mixtures, residence time of reactive species, and temperature of the cavity. Using variable radius cylindrical electrodes, large-surface ring-shaped samples, and dc bias in the external circuit, we have measured substantial average etching rates and outlined the possibility …

Progress On The Interaction Region Design And Detector Integration At Jlab's Meic, V. S. Morozov, P. Brindza, A. Camsonne, Ya S. Derbenev, R. Ent, D. Gaskell, F. Lin, P. Nadel-Turonski, M. Ungaro, Y. Zhang, C. E. Hyde, K. Park, M. Sullivan, Z. W. Zhao

Physics Faculty Publications

One of the unique features of JLab's Medium-energy Electron-Ion Collider (MEIC) is a full-acceptance detector with a dedicated, small-angle, high-resolution detection system, capable of covering a wide range of momenta (and charge-to-mass ratios) with respect to the original ion beam to enable access to new physics. We present an interaction region design developed with close integration of the detection and beam dynamical aspects. The dynamical aspect of the design rests on a symmetry-based concept for compensation of non-linear effects. The optics and geometry have been optimized to accommodate the detection requirements and to ensure the interaction region's modularity for ease …

Multipacting Optimization Of A 750 Mhz Rf Dipole, A. Castilla, J. R. Delayen

Physics Faculty Publications

Crab crossing schemes have been proposed to re-instate luminosity degradation due to crossing angles at the interaction points in next generation colliders to avoid the use of sharp bending magnets and their resulting large synchrotron radiation generation, highly undesirable in the detector region. The rf dipole has been considered for a different set of applications in several machines, both rings and linear colliders. We present in this paper a study of the effects on the multipacting levels and location depending on geometrical variations on the design for a crabbing/deflecting application in a high current (3/0.5 A), high repetition (750 MHz) …

Precision Measurements Of G¹ Of The Proton And The Deuteron With 6 Gev Electrons, Y. Prok, K. P. Adhikari, D. Adikaram, M. J. Amaryan, G. E. Dodge, N. Guler, A. Klein, S. Koirala, S. E. Kuhn, Clas Collaboration

Physics Faculty Publications

The inclusive polarized structure functions of the proton and deuteron, g^p₁ and g^d₁ , were measured with high statistical precision using polarized 6 GeV electrons incident on a polarized ammonia target in Hall B at Jefferson Laboratory. Electrons scattered at laboratory angles between 18 and 45 degrees were detected using the CEBAF Large Acceptance Spectrometer (CLAS). For the usual deep inelastic region kinematics, Q² > 1 GeV² and the final-state invariant mass W >2 GeV, the ratio of polarized to unpolarized structure functions g₁/F₁ is found to be nearly independent of Q …

Neutron Spin Struccture With Polarized Deuterons And Spectator Proton Tagging At Eic, W. Cosyn, V. Guzey, D. W. Higinbotham, C. Hyde, S. Kuhn, P. Nadel-Turonski, K. Park, M. Sargsian, M. Strikman, C. Weiss

Physics Faculty Publications

The neutron's deep-inelastic structure functions provide essential information for the flavor separation of the nucleon parton densities, the nucleon spin decomposition, and precision studies of QCD phenomena in the flavor-singlet and nonsinglet sectors. Traditional inclusive measurements on nuclear targets are limited by dilution from scattering on protons, Fermi motion and binding effects, final-state interactions, and nuclear shadowing at x ≪ 0.1. An Electron-Ion Collider (EIC) would enable next-generation measurements of neutron structure with polarized deuteron beams and detection of forward-moving spectator protons over a wide range of recoil momenta (0 < pR < several 100MeV in the nucleus rest frame). The free neutron structure functions could be obtained by extrapolating the measured recoil momentum distributions to the on-shell point. The method eliminates nuclear modifications and can be applied to polarized scattering, as well as to semi-inclusive and exclusive final states. We review the prospects for neutron structure measurements with spectator tagging at EIC, the status of R&D efforts, and the accelerator and detector requirements.

Magnetic Bunch Compression For A Compact Compton Source, B.R.P. Gamage, T. Satogata

Physics Faculty Publications

A compact electron accelerator suitable for Compton source applications is in design at the Center for Accelerator Science at Old Dominion University and Jefferson Lab. Here we discuss two options for transverse magnetic bunch compression and final focus, each involving a 4-dipole chicane with M56 tunable over a range of 1.5-2.0m with independent tuning of final focus to interaction point \beta*=5mm. One design has no net bending, while the other has net bending of 90 degrees and is suitable for compact corner placement.

Study Of Cavity Imperfection Impact On Rf-Parameters And Multipole Components In A Superconducting Rf-Dipole Cavity, R. G. Olave, J. R. Delayen, S. U. De Silva, Z. Li

Physics Faculty Publications

The ODU/SLAC superconducting rf-dipole cavity is under consideration for the crab-crossing system in the upcoming LHC luminosity upgrade. While the proposed cavity complies well within the rf-parameters and multipolar component restrictions for the LHC system, cavity imperfections arising from cavity fabrication, welding and frequency tuning may have a significant effect in these parameters. We report on an initial study of the impact of deviation from the ideal shape on the cavity’s performance in terms of rf-parameters and multipolar components.

Multipole Field Effects For The Superconducting Parallel-Bar/Rf-Dipole Deflecting/Crabbing Cavities, S. U. De Silva, J. R. Delayen

Physics Faculty Publications

The superconducting parallel-bar deflecting/crabbing cavity is currently being considered as one of the design options in rf separation for the Jefferson Lab 12 GeV upgrade and for the crabbing cavity for the proposed LHC luminosity upgrade. Knowledge of multipole field effects is important for accurate beam dynamics study of rf structures. The multipole components can be accurately determined numerically using the electromagnetic surface field data in the rf structure. This paper discusses the detailed analysis of those components for the fundamental deflecting/crabbing mode and higher order modes in the parallel-bar deflecting/crabbing cavity.

Geometry Effects On Multipole Components And Beam Optics In High-Velocity Multi-Spoke Cavities, C. S. Hopper, K. Deitrick, J. R. Delayen

Physics Faculty Publications

Velocity-of-light, multi-spoke cavities are being proposed to accelerate electrons in a compact light-source [1]. There are strict requirements on the beam quality which require that the linac have only small non-uniformities in the accelerating field. Beam dynamics simulations have uncovered varying levels of focusing and defocusing in the proposed cavities, which is dependent on the geometry of the spoke in the vicinity of the beam path. Here we present results for the influence different spoke geometries have on the multipole components of the accelerating field and how these components, in turn, impact the simulated beam properties.

Comparison Of Electromagnetic, Thermal And Mechanical Calculations With Rf Test Results In Rf Dipole Deflecting/Crabbing Cavities, H. Park, S. U. Silva, J. R. Delayen

Physics Faculty Publications

The current requirements of higher gradients and strict dimensional constraints in the emerging applications have required the designing of compact deflecting and crabbing rf structures. The superconducting rf-dipole cavity is one of the first novel compact designs with attractive properties such as higher gradients, higher shunt impedance and widely separated higher order modes. The recent tests performed on proof-of-principle designs of the rf-dipole geometry at 4.2 K and 2.0 K in a vertical test assembly have proven the designs to achieve higher gradients with higher intrinsic quality factors and easily processed multipacting conditions. The design frequency sensitivity to pressure (df/dp) …

Mechanical Analysis Of The 400 Mhz Rf-Dipole Crabbing Cavity Prototype For Lhc High Luminosity Upgrade, S. U. De Silva, H. Park, J. R. Delayen, Z. Li

Physics Faculty Publications

The proposed LHC high luminosity upgrade requires two crabbing systems in increasing the peak luminosity, operating both vertically and horizontally at two interaction points of IP1 and IP5. The required system has tight dimensional constraints and needs to achieve higher operational gradients. A proof-of-principle 400 MHz crabbing cavity design has been successfully tested and has proven to be an ideal candidate for the crabbing system. The cylindrical proof-of-principle rf-dipole design has been adapted in to a square shaped design to further meet the dimensional requirements. The new rf-dipole design has been optimized in meeting the requirements in rf-properties, higher order …

Ion Acceleration In A Helicon Source Due To The Self-Bias Effect, Matt Wiebold, Yung-Ta Sung, John E. Scharer

Physics Faculty Publications

Time-averaged plasma potential differences up to 165 V over several hundred Debye lengths are observed in low pressure (p_n < 1 mTorr) expanding argon plasmas in the Madison Helicon eXperiment (MadHeX). The potential gradient leads to ion acceleration greater than that predicted by ambipolar expansion, exceeding E_i≈7 kT_e in some cases. RF power up to 500 W at 13.56 MHz is supplied to a half-turn, double-helix antenna in the presence of a nozzle magnetic field, adjustable up to 1 kG. A retarding potential analyzer (RPA) measures the ion energy distribution function (IEDF) and a swept emissive probe measures the plasma potential. Single and double probes measure the electron density and temperature. Two distinct mode hops, the capacitive-inductive (E-H) and inductive-helicon (H-W) transitions, …

Beam Dynamics Studies For Transverse Electromagnetic Mode Type Rf Deflectors, Shahid Ahmed, Geoffrey A. Krafft, Kirsten Deitrick, Subashini U. De Silva, Jean R. Delayen, Mike Spata, Michael Tiefenback, Alicia Hofler, Kevin Beard

Physics Faculty Publications

We have performed three-dimensional simulations of beam dynamics for transverse electromagnetic mode (TEM) type rf deflectors: normal and superconducting. The compact size of these cavities as compared to the conventional TM₁₁₀ type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of six 2-cell normal conducting cavities or a single cell superconducting structure is enough to produce the required vertical displacement at the target point. Both the normal and superconducting structures show very small emittance dilution due to the …

Evidence For The Onset Of Color Transparency In Ρ0 Electroproduction Off Nuclei, L. El Fassi, L. Zana, H. Hafidi, M. Holtrop, B. Mustapha, W. K. Brooks, H. Hakobyan, Z. Zheng, K. P. Adhikari, D. Adikaram, M. J. Amaryan, H. Baghdasaryan, S. Bültmann, G. E. Dodge, C. E. Hyde, A. Klein, S. E. Kuhn, M. Mayer, H. Seraydaryan, L. B. Weinstein

Physics Faculty Publications

We have measured the nuclear transparency of the incoherent diffractive A( e , e ′ ρ⁰ ) process in ¹²C and ⁵⁶Fe targets relative to ²H using a 5 GeV electron beam. The nuclear transparency, the ratio of the produced ρ⁰ ʼs on a nucleus relative to deuterium, which is sensitive to ρA interaction, was studied as function of the coherence length (lc), a lifetime of the hadronic fluctuation of the virtual photon, and the four-momentum transfer squared (Q²). While the transparency for both ¹²C and ⁵⁶Fe …

Multipacting Analysis Of High-Velocity Superconducting Spoke Resonators, C. S. Hopper, J. R. Delayen

Physics Faculty Publications

Some of the advantages of superconducting spoke cavities are currently being investigated for the high-velocity regime. When determining a final, optimized geometry, one must consider the possible limiting effects multipacting could have on the cavity. We report on the results of analytical calculations and numerical simulations of multipacting electrons in superconducting spoke cavities and methods for reducing their impact.

Superconducting Spoke Cavities For Electron And High-Velocity Proton Linacs, J. R. Delayen

Physics Faculty Publications

Spoke resonantors are currently under development for many proton machines but these structures are also considered for high beta electron linacs as well. These structures compare well to traditional elliptical cavities.

Experimental Observation Of Ion Beams In The Madison Helicon Experiment, Matt Wiebold, Yung-Ta Sung, John E. Scharer

Physics Faculty Publications

Argon ion beams up to E_b=165 eV at P_rf=500 W are observed in the Madison Helicon eXperiment (MadHeX) helicon source with a magnetic nozzle. A two-grid retarding potential analyzer (RPA) is used to measure the ion energy distribution, and emissive and rf-filtered Langmuir probes measure the plasma potential, electron density, and temperature. The supersonic ion beam (M=v_i/c_s up to 5) forms over tens of Debye lengths and extends spatially for a few ion-neutral charge-exchange mean free paths. The parametric variation of the ion beam energy is explored, including flow rate, rf power, and …

Plasma Treatment Of Bulk Niobium Surface For Superconducting Rf Cavities: Optimization Of The Experimental Conditions On Flat Samples, M. Rašković, J. Upadhyay, L. Vuskovic, S. Popovic, A.-M. Valente-Feliciano, L. Phillips

Physics Faculty Publications

Accelerator performance, in particular the average accelerating field and the cavity quality factor, depends on the physical and chemical characteristics of the superconducting radio-frequency (SRF) cavity surface. Plasma based surface modification provides an excellent opportunity to eliminate nonsuperconductive pollutants in the penetration depth region and to remove the mechanically damaged surface layer, which improves the surface roughness. Here we show that the plasma treatment of bulk niobium (Nb) presents an alternative surface preparation method to the commonly used buffered chemical polishing and electropolishing methods. We have optimized the experimental conditions in the microwave glow discharge system and their influence on …

Beam-Energy And System-Size Dependence Of Dynamical Net Charge Fluctuations, B. I. Abelev, M. M. Aggarwal, Z. Ahammed, B. D. Anderson, D. Arkhipkin, G. S. Averichev, Y. Bai, J. Balewski, S. Bueltmann, Star Collaboration

Physics Faculty Publications

We present measurements of net charge fluctuations in Au+Au collisions at √sNN=19.6, 62.4, 130, and 200 GeV, Cu+Cu collisions at √sNN=62.4 and 200 GeV, and p+p collisions at √s=200GeV using the dynamical net charge fluctuations measure ν_+−,dyn. We observe that the dynamical fluctuations are nonzero at all energies and exhibit a modest dependence on beam energy. A weak system size dependence is also observed. We examine the collision centrality dependence of the net charge fluctuations and find that dynamical net charge fluctuations violate 1/N_ch scaling but display approximate 1/N_part scaling. We also study the azimuthal and …