Other Physics Commons^™

High Pressure Effects On Electron Transport And Structure Of Colossal Magnetoresistive Materials, Congwu Cui

Dissertations

Pressure effects on the electronic, magnetic properties and structure of several typical colossal magnetoresistive manganites, La_0.60Y_0.07Ca_0.33MnO₃, Pr_1-xCa_xMn0₃ (X = 0.25, 0.30, 0.35), Nd_1-xSr_xMnO₃ (x = 0.45, 0.50), were explored through high pressure resistivity and structure measurements. It was shown that pressure up to ~7 GPa induces more complicated charge, spin and lattice state changes than in the low pressure range explored previously. In La_0.60Y_0.07Ca_0.33MnO₃, pressure induces a local atomic structure transformation at a critical …

Nonlinear Optical Properties Of Novel Nanostructured Ion Implanted Laser Ablated Silicon Using Femtosecond Pulse Excitation, Elaine Nicole Lalanne

Dissertations

The study of the nonlinear optical properties of novel nanostructured ion implanted and laser ablation of Silicon is motivated by the need for materials that exhibit large values of the real part of the third order nonlinear susceptibility (χ⁽³⁾_Re). This property is essential for light controlled phase or refractive index modulation at low power, where the optical properties are used for optical switching devices. Previous nanosecond (ns) measurements indicated values of-2.8 x 10 ^-5; esu ( γ = 532 nm) for χ⁽³⁾_Re.

The characterization of nonlinear optical properties of the samples was studied …

Application Of Adaptive Optics To The Spectroscopic Investigation Of Small-Scale Solar Structures, Klaus Hartkorn

Dissertations

We study bright points, umbral dots and the G-band using a two-dimensional spectrometer and an Adaptive Optics system, which allows us to record high-resolution dopplergrams and residual intensity images. We find evidence that bright points are smaller than 120 km in diameter. Bright points are situated exclusively in regions of enhanced G-band brightness and do not show a change in their shape or a displacement in their position of more than 120 km horizontally over a height range from 0 km to 320 km above photospheric level T = 1. We do not find velocity differences of more than 100 …

Resonances Of Periodic Metal-Dielectric Structures At The Infrared Wavelength Region, Oren Sternberg

Dissertations

Metal meshes have been used as reflectors in radar receivers for wavelength much longer than the periodic constant of the conducting wires and as optical reflectors in a FabryPerot in the far infrared. Cross shaped metal meshes can be used as band pass filters but the design theory and near field properties have not been known.

Transmittance of thin, single-layer and multiplayer metal meshes has been investigated using Micro-Strips, yielding numerical solutions of Maxwell's equations. The near field effect was studied for two alignment configurations of cross shaped metal meshes, both free standing and with dielectrics, and transmission line theory …

Experimental And Theoretical Study Of An Integrated Silicon Mach-Zehnder Interferometer For Chemical Sensing Applications, Yew Fong Hor

Dissertations

This thesis involves the design, fabrication and characterization of an integrated optical waveguide sensor. Prior to fabrication, design parameters of the waveguide need to be determined and optimized. The waveguide parameters such as waveguide dimension and the refractive index of the core and cladding are obtained from the single-mode cutoff frequency calculated using either analytical or numerical methods. In this thesis, details of analytical calculations to determine the cutoff frequency in terms of the waveguide parameters will be presented. The method discussed here is Marcatili's approximation. The purpose is to solve the scalar wave equation derived from Maxwell's equations because …

Two-Dimensional Reflectivity Polarization Elastometry Imaging Techniques (Piet) Of Soft Tissue, Hee Chuan Lim

Dissertations

A non-invasive polarized light reflection measurement method to measure the stretch of soft tissue, such as skin, is described. The technique utilizes changes in the reflectivity of polarized light intensity as a monitor of skin stretch. Measurements on in-vitro pigskin and invivo human skin show that the reflectivity of polarized light intensity increases linearly with stretch over a range. The changes in diffusive reflectivity properties of skin result from the alterations that take place in the roughness across the thickness of the skin layers due to stretch. Conceptually, as the roughness of a layer decreases with stretch, a smoother reflecting …

Modeling Hydrogen Diffusion For Solar Cell Passivation And Process Optimization, Yi Zhang

Dissertations

A diffusion model for hydrogen (H) in crystalline silicon was established which takes into account the charged state conversion, junction field, mobile traps, and complex formation and dissociation at dopant and trap sites. Carrier exchange among the various charged species is a "fast" process compared to the diffusion process. A numerical method was developed to solve the densities of various charged species from the Poisson's equation that involves shallow-level dopants and one "negative U" impurity, e.g., H. Time domain implicit method was adopted in finite difference scheme to solve the fully coupled equations.

Limiting versions of the model were applied …

Structural, Transport And Magnetic Studies Of Perovskite Bi1-X Cax Mn O3, Hyungje Woo

Dissertations

This dissertation presents an investigation of the fundamental physics of the perovskite system Bi_1-xCa_xMn0₃. This material belongs to a group of simple perovskites called the manganites which are of technological importance for magnetic device applications as read-head sensors.

The Bi_1-xCa_xMnO₃ system is known to exhibit charge ordering (and high sensitivity to magnetic fields) for a much broader range of x than the well-characterized La_1-xCa_xMnO₃ system. However, the properties of Bi_1-xCa_xMnO₃ over the entire doping range are not well understood. …

Detection Of Vapor Phase Mercury Species By Laser Fluorescence Methods, Xiaomei Tong

Dissertations

Elemental and compound mercury are often both volatile and air stable. Several mercury species emissions have been identified in off-gases from industrial processes. The high toxicity of mercury species and the presence of mercury species in municipal waste and coal have prompted a demand for a cost-effective, accurate, and rugged technique for real-time, continuous detection of mercury species vapors. Real-time, continuous emission measurements are important for process control, monitoring, and remediation. At present, there is no commercial continuous emission monitoring (CEM) technique or instrumentation to reliably monitor volatile mercury species emissions from industrial stacks. Conventional measurement methods, such as cold …

Electrostatic Micro Actuators For Mirror And Other Applications, Xingtao Wu

Dissertations

Micro-electro-mechanical systems (MEMS) based electrostatic micro actuators are becoming important building blocks for innovations in optical signal processing and computing systems due to their inherently small size, high density, high speed and low power consumption. Generally, the principle of operation in these systems can be described as: an electrostatic attractive force causes a mechanical rotation, translation or deformation of a mirror plate, controlling the power, phase or direction of a light beam while it propagates through some medium or through free space. The fast paced, competitive research and development efforts widely being undertaken, both in academia and industry, are demanding …

Ultrathin Silicon Wafer Bonding Physics And Applications, Michael H. Beggans

Dissertations

Ultrathin silicon wafer bonding is an emerging process that simplifies device fabrication, reduces manufacturing costs, increases yield, and allows the realization of novel devices. Ultrathin silicon wafers are between 3 and 200 microns thick with all the same properties of the thicker silicon wafers (greater than 300 microns) normally used by the semiconductor electronics industry. Wafer bonding is one technique by which multiple layers are formed.

In this thesis, the history and practice of wafer bonding is described and applied to the manufacture of microelectomechanical systems (MEMS) devices with layer thickness on the scale of microns. Handling and processing problems …

Broadband Whole Package Fdtd Simulation, Shenjun Li

Dissertations

Whole package analysis is becoming more and more important with the rapid expansion of high frequency electronics. The motivation of this thesis is to find and implement a new method for broadband whole package simulation. 3-dimension (3-D) whole package Finite Difference Time Domain (FDTD) simulation result was first reported in detail in this thesis.

The FDTD method is a widely used full-wave time-domain simulation method used in the design and analysis for electromagnetic (EM) systems, such as antennas, wave propagating, and microwave circuits. Absorbing boundary condition (ABC), such as the perfect matched layer (PML) method, makes it possible to accurately …

Near-Field Imaging With Terahertz Pulses, Oleg Mitrofanov

Dissertations

High spatial resolution imaging is implemented with a novel collection mode near-field terahertz (THz) probe. Exceptional sensitivity of the probe allows imaging with spatial resolution of few microns using THz pulses with spectral content of 120 to 1500 microns. In the present study, the principle of the probe operation as well as the probe design and characteristics are described.

The probe performance is related to effective detection of radiation coupled into the probe aperture. Propagation of short single-cycle electromagnetic pulses through apertures as small as 1/300 of the wavelength is experimentally and numerically studied. Finite-difference time-domain method is used to …

Gated Multi-Cycle Integration (Gmci) For Focal Plane Array (Fpa) Applications, Haijiang Ou

Dissertations

In this thesis, the model and the theory of gated multi-cycle integration (GMCI) were first developed specifically for focal plane array dealing with repetitive or modulated image. The operational modes of GMCI include gated integration (GI), phase sensitive integration (PSI), multi-point summation, multi-point subtraction, multi-sample averaging and some of their combinations. Thus, the analytic theory of GMCI somehow unifies the theories of gated integration, phase sensitive detection, multiple summation and average. PSI works with background and/or dark current subtraction. As a result, the storage well of a pixel is mainly used for signal integration even if there exists a strong …

A Near-Infrared Filter System And Study Of Solar Umbral Dots At 1.6 Μm, Jingshan Wang

Dissertations

The observations of solar magnetic fields are very important because they influence events on the sun. Almost all of magnetographs in the world work in the visible wavelength and they are powerful instruments for measuring strong magnetic fields (above 1000 Gauss) on the sun. To measure the weak solar magnetic fields (below 1000 Gauss), a new filter system (magnetograph) working in near-IR wavelength has been developed in this work. This system includes an interference prefilter (FWHM - 40Å), a liquid crystal magnetic analyzer, a near-IR bireffingent filter (FWHM - 2.5Å), a near-IR Fabry-Perot filter (FWHM - 0.12Å), a near-IR InGaAs …

Software And Hardware Improvements For Digital Solar Magnetograph System, Shu Yang

Dissertations

Digital solar imaging systems have been widely used in solar observations. Their high resolution, high rate of image acquisition and convenience for off-line image processing have provided significant improvements to solar physics research. In this project, two digital magnetograph systems established at Big Bear Solar Observatory (BBSO) have been described. One is used to provide a high frame rate magnetogram system, and the other provides a real-time image alignment, i.e., a correlation tracker system.

The developed correlation tracker system consists of a high-speed 64x64 CCD camera, an EDT image grabbing board, an agile mirror, a D/A board and a Sun …

Time Domain Measurement Of The Nonlinear Refractive Index In Optical Fibers And Semiconductor Film, Hernando Garcia

Dissertations

A new technique to measure the nonlinear refractive index n₂ in optical fibers and semiconductor films has been developed. It is based on the time delay two-beam coupling of very intense picosecond laser pulses that have been self-phase modulated in the nonlinear optical medium. The two beams are coupled in a slow responding medium that is sensitive to time dependent phase distortions. We determine that the amount of phase distortion experienced by the pulse is proportional to the nonlinear refractive index of the medium, This time domain approach can also be applied to optical fiber amplifiers in the presence …

Modeling, Design And Fabrication Of Thin-Film Microcrystalline Silicon Solar Cells, Wei Chen

Dissertations

The modeling, design and fabrication of low-cost thin-film microcrystalline silicon(µcSi) solar cells is studied in this thesis. The cell, considered in this investigation, utilizes low-cost glass as the substrate and microcrystalline Si (µc-Si) as the active layer. A comprehensive refractive index (n) and extinction coefficient (k) model of silicon as function of doping, temperature and wavelength is developed to assist the optical design of the cell. In order to obtain acceptable short circuit current density (Jsc) from the cell, it is found that the thickness of the silicon thin film should be more than 10µm. To get the best light …

Experimental And Phenomenological Study Of Persistent Photoconductivity In Yba2cu3o6 Thin Films, Daniel-Dennis Mcalevy Bubb

Dissertations

Persistent Photoconductivity in YBa₂Cu₃O_6+x thin films is studied by means of infrared photoconductivity measurements after the films have been illuminated with visible light at low temperature. Experimentally, the effect is characterized by the samples' electrical response to infrared light, either causing the resistance to decrease or increase.

A cellular automata model is proposed in explanation of these results and is shown to be consistent with current experimental understanding of this unusual effect, both our results and those of others. The cellular automata model may have application to other unusual optical phenomena exhibited by YBa_{2 …}

Production Of Pulsed Low Energy Electron Beams, Shyam Das

Theses

In this thesis, an experimental setup for the production of low energy electron beams based on Explosive Electron Emission (EEE) is used to study the transmission of pulsed low energy electron beams through silicon nitride foils. The electron beam density before and after the foil are measured. The experimental values fully agree with the theoretical estimates. Work done in this thesis is a judicious combination of vacuum technology, pulsing of high voltage sources, thermal physics and electronics. Dia rams and -photo uaphs of the experimental setup arl-I presented. A paper was 9 presented at the American Vacuum Society (AVS) symposium …

Emissivity Measurements And Modeling Of Silicon Related Materials And Structures, Sufian Abedrabbo

Dissertations

The objective of this dissertation is to investigate the major issues concerning applications of pyrometry for applications in rapid thermal processing (RTP) of silicon related materials. The research highlights of this work are:

Establishment of spectral ernissometry as a novel, reliable and reproducible technique for:

Determination of wavelength and temperature dependent reflectivity, transmissivity, emissivity and temperature, simultaneously, of silicon related materials and structures. The emissometer operates in the wavelength range of 1-20mm and temperature range of 300-1200K. The analysis of the influence of morphological effects on the radiative properties by measurement of (a) front-smooth incidence versus backside-rough incidence of singleside …

Surface Phenomena On The Tin-Dioxide Polycrystalline Layers, Andrei A. Fluerasu

Theses

Polycrystalline tin-dioxide is widely used in the detection of reducing gases (such as H₂, CO, CH₄, C₂H₅OH,...) in air by measuring its conductivity changes. The advantage of gas sensors based on such sensing devices is low cost and high sensitivity. In contrast to their widespread applications and to their successful empirical research and development work, the present understanding of the chemical sensing mechanisms is still immature.

In this thesis, for gas sensors based on thick and porous tin-dioxide layers, a study of the response function upon variation of the partial pressure of …

Design And Fabrication Of A Miniature Pressure Sensor Head Using Direct Bonded Ultra-Thin Silicon Wafers, Chad Eugene Statler

Theses

A miniature pressure sensor head is designed and fabricated using an ultra-thin silicon membrane directly bonded to an excimer laser micromachined substrate. The pressure sensor head has its intended implementation as part of an optically interrogated device with sensitivity to pressures ranging from 0.5 to 4.0 MPa. The pressure range design is shown to be easily adjusted by tailoring the thickness of the membrane wafer. The fabrication process features numerous advantages over existing pressure sensor construction technology including a maskless procedure and no chemical etching or mechanical thinning necessary to form the membrane after bonding. An optic lever is constructed …

Degradation And Breakdown In Ultra-Thin Silicon Oxides, Christopher Franck

Theses

Emerging trends in the semiconductor device industry call for detailed knowledge of the properties of devices whose dimensions are small enough to exploit Quantum Mechanical effects. This thesis presents a complete picture of oxide degradation in MOS direct tunnel diodes (t0 <3.4 nm). It is demonstrated that for structures fabricated at different facilities and stressed with either gate or substrate injection, a universal degradation mode is revealed which is manifested as the build up of positive charge in the oxide. The data gathered demonstrates that the positive charging phenomena in sub-3.5 nm oxides is independent of oxide thickness, and is characterized by a voltage threshold and two-regime temperature dependence. Further, the catastrophic failure, or breakdown, of these oxides was studied and the strongest evidence to date is presented which links the positive charging phenomena to the oxide breakdown. This thesis concludes with the presentation of a novel device design which can exploit the properties of degradation and breakdown, in thin oxides, to achieve an EEPROM memory cell of superior endurance.

Investigation Of Potential Oxygen Defect Mechanism Of Persistent Photoconductivity And Photoinduced Superconductivity In Yba2cu3ox, Denise Catherine Chew

Theses

In this thesis work, we conclude that oxygen vacancy defects play a fundamental role in the PPC/PISC mechanism and identify the oxygen defects as F centers (an oxygen vacancy which traps two electrons) or F⁺ centers. Also, the correlation between the peaks observed in the luminescence spectra and those observed in the wavelength dependence of PPC suggest that the photogeneration of charges and their annihilation via luminescent recombination occur in the same level (Cu-O chains) of the YBa₂Cu₃O_x crystal. Previous models had assigned the peaks in the PPC excitation spectrum to charge transfer in …

Ultra-Thin Silicon Wafer Bonding, Diyu Yan

Theses

In this thesis the history and recent developments on the silicon direct bonding technique are reviewed. The growing applications of this technique in SOI, SOS and MEMS areas, difficulties and disadvantages of various bonding processes are discussed. A direct bonding procedure for attaching ultra-thin wafers less than 200 μm thick to substrate wafers is developed and described in detail. Difficulties in handling, aligning and annealing ultra-thin wafers are reported. Wafers of different doping concentration, thickness, surface roughness and chemical characteristics are tested for bondability. Methods to minimize voids and other failure mechanisms are proposed. A photodetector is designed based on …

Microaccelerometer With Mechanically-Latched Memory, Zhenyu Ma

Theses

A new mechanically-latching micromachined accelerometer is designed in this thesis based on the large deflection of a microcantilever beam. This surface micromachined device moves in the plane of the substrate surface. This device is surface micromachined with no backside etching needed. The interaction of the friction tether and the dimensions of the cantilever beam have been modeled and calculated. The design acceleration sensitivity range is from 100G to 1000G. The photomask set has been designed by using the Mentor Graphics system. The dimension of individual accelerometers ranges from 100 to 1000 micrometers in length to tens of micrometers in width. …

Silicon Optical Fiber Pressure Sensor, Jian Pan

Theses

A novel optical fiber pressure sensor based on a micromachined thin silicon diaphragm is proposed. Detail descriptions of the sensor structure, modulation principle and fabrication process are given.

The device operates on the following principle: Pressure deflects a silicon diaphragm which moves the output end of a light source fiber. The emitted light intensity is picked up and shared by two receiving fibers placed side by side. The variation of the intensity ratio in the receiving fibers caused by the relative motion of the emitting fiber can be easily converted to a linear signal versus the deflection of the silicon …

A High Temperature Pressure Sensor Based On Magnetic Coupling And Silicon Wafer Bonding, Deguang Zhu

Theses

In this thesis, the design and fabrication of a bulk micromachined and wafer bonded pressure sensor for high temperature applications is described. The device design is based on the magnetic coupling principle as described by the Biot-Savart law. By combining the mechanical properties of single crystal silicon with magnetic coupling, the designed sensor can be operated up to 600°C. The key components within the sensor are two inductive coils, a silicon diaphragm and a hermetic vacuum cavity.

The modeling based on a nine-turn single level coil device and a 300 μm x 300 diaphragm indicates an output rms voltage range …

Mbe Growth Of Inxga1-Xas/Gaas/Si Heterostructure System, Jun Liu

Theses

In this work, we grew the In_xGa_1-xAs/GaAs/Si (GaAs as buffer layer) by MBE technique. The surface of the buffer layer became microscopically rough as the thickness of the buffer layer increased and the growth mode of GaAs on Si underwent a change from three-dimensional to two-dimensional during the initial growth stage as indicated on the Reflection High Energy Electron Diffraction (RHEED) screen. The Scattering Electron Microscopy (SEM) observation of the etched surface of GaAs on Si showed that the structure of the buffer layer tended to be poly-crystalline and it was possible that a predominant orientation …