Optics Commons^™

Demonstrating Continuous Variable Einstein–Podolsky–Rosen Steering In Spite Of Finite Experimental Capabilities Using Fano Steering Bounds, James Schneeloch, Samuel H. Knarr, Gregory A. Howland, John C. Howell

Mathematics, Physics, and Computer Science Faculty Articles and Research

We show how one can demonstrate continuous-variable Einstein–Podolsky–Rosen (EPR) steering without needing to characterize entire measurement probability distributions. To do this, we develop a modified Fano inequality useful for discrete measurements of continuous variables and use it to bound the conditional uncertainties in continuous-variable entropic EPR-steering inequalities. With these bounds, we show how one can hedge against experimental limitations including a finite detector size, dead space between pixels, and any such factors that impose an incomplete sampling of the true measurement probability distribution. Furthermore, we use experimental data from the position and momentum statistics of entangled photon pairs in parametric …

Coherent Digital Holographic Adaptive Optics, Changgeng Liu

USF Tampa Graduate Theses and Dissertations

A new type of adaptive optics (AO) based on the principles of digital holography (DH) is proposed and developed for the use in wide-field and confocal retinal imaging. Digital holographic adaptive optics (DHAO) dispenses with the wavefront sensor and wavefront corrector of the conventional AO system. DH is an emergent imaging technology that gives direct numerical access to the phase of the optical field, thus allowing precise control and manipulation of the optical field. Incorporation of DH in an ophthalmic imaging system can lead to versatile imaging capabilities at substantially reduced complexity and cost of the instrument. A typical conventional …

Tunable Narrow Band Difference Frequency Thz Wave Generation In Dast Via Dual Seed Ppln Opg, Brian Dolasinski, Peter E. Powers, Joseph W. Haus, Adam Cooney

Electro-Optics and Photonics Faculty Publications

We report a widely tunable narrowband terahertz (THz) source via difference frequency generation (DFG). A narrowband THz source uses the output of dual seeded periodically poled lithium niobate (PPLN) optical parametric generators (OPG) combined in the nonlinear crystal 4-dimthylamino-N-methyl-4-stilbazolium-tosylate (DAST). We demonstrate a seamlessly tunable THZ output that tunes from 1.5 THz to 27 THz with a minimum bandwidth of 3.1 GHz. The effects of dispersive phase matching, two-photon absorption, and polarization were examined and compared to a power emission model that consisted of the current accepted parameters of DAST.

Secure Transmission Of Static And Dynamic Images Via Chaotic Encryption In Acousto-Optic Hybrid Feedback With Profiled Light Beams, Monish Ranjan Chatterjee, Fares S. Almehmadi

Electrical and Computer Engineering Faculty Publications

Secure information encryption via acousto-optic (AO) chaos with profiled optical beams indicates substantially better performance in terms of system robustness. This paper examines encryption of static and time-varying (video) images onto AO chaotic carriers using Gaussian-profile beams with diffracted data numerically generated using transfer functions. The use of profiled beams leads to considerable improvement in the encrypted signal.

While static image encryption exhibits parameter tolerances within about ±10% for uniform optical beams, profiled beams reduce the tolerance to less than 1%, thereby vastly improving both the overall security of the transmitted information as well as the quality of the image …

Multiple Object Detection In Hyperspectral Imagery Using Spectral Fringe-Adjusted Joint Transform Correlator, Paheding Sidike, Vijayan K. Asari, Mohammad S. Alam

Electrical and Computer Engineering Faculty Publications

Hyperspectral imaging (HSI) sensors provide plenty of spectral information to uniquely identify materials by their reflectance spectra, and this information has been effectively used for object detection and identification applications. Joint transform correlation (JTC) based object detection techniques in HSI have been proposed in the literatures, such as spectral fringe-adjusted joint transform correlation (SFJTC) and with its several improvements.

However, to our knowledge, the SFJTC based techniques were designed to detect only similar patterns in hyperspectral data cube and not for dissimilar patterns. Thus, in this paper, a new deterministic object detection approach using SFJTC is proposed to perform multiple …

Two-Dimensional Temperature Analysis Of Nuclear Fireballs Using Digitized Film, Robert C. Slaughter, Tyler R. Peery, John W. Mcclory

Faculty Publications

Researchers at Lawrence Livermore National Laboratory have begun digitizing technical films spanning the atmospheric nuclear testing operations conducted by the United States from 1945 through 1962. Each atmospheric nuclear test was filmed by Edgerton, Germeshausen, and Grier, Inc., using between 20 to 40 cameras per test. These technical film test data represent a primary source for advancing the knowledge of nuclear weapon output as well as the understanding of nonnuclear high-temperature gases. This manuscript outlines the procedures followed in order to perform two-dimensional temperature calculations for early time nuclear fireballs using digitized film. The digitized optical densities of the film …

Macular Pigment Spatial Distribution Effects On Glare Disability, Christopher Putnam, Carl Bassi

College of Optometry Faculty Works

Purpose This project explored the relationship of the macular pigment optical density (MPOD) spatial profile with measures of glare disability (GD) across the macula. Results The cHFP identified reliable MPOD spatial distribution maps demonstrating a 1st-order exponential decay as a function of increasing eccentricity. There was a significant negative correlation between both measures of foveal MPOD and GD using 6cycles per degree (cpd) and 9cpd stimuli. Significant correlations were found between corresponding parafoveal MPOD measures and GD at 2 and 4° of eccentricity using 9cpd stimuli with greater MPOD associated with less glare disability. Conclusions These results are consistent with …

Geometry Induced Magneto-Optic Effects In Lpe Grown Magnetic Garnet Films, Ashim Chakravarty

Dissertations, Master's Theses and Master's Reports - Open

This dissertation addresses dimensionality-induced magneto-optic effects in liquid-phaseepitaxy magnetic garnet thin films. It is found that the Faraday rotation (FR) per unit length evinces a marked and steady enhancement as the film thickness is reduced below ~100 nm in Bi_0.8Gd_0.2Lu₂Fe₅O₁₂, although it remains constant in the micron- and most of the submicron- regime. The reported specific FR change in such reduced dimensions is due to sizedependent modifications in diamagnetic transition processes in the garnet film. These processes correspond to the electronic transitions from the singlet ⁶S ground state to …

Role Of Antenna Modes And Field Enhancement In Second Harmonic Generation From Dipole Nanoantennas, Domenico De Ceglia, Maria Antonietta Vincenti, Costantino De Angelis, Andrea Locatelli, Joseph W. Haus, Michael Scalora

Electro-Optics and Photonics Faculty Publications

We study optical second harmonic generation from metallic dipole antennas with narrow gaps. Enhancement of the fundamental-frequency field in the gap region plays a marginal role on conversion efficiency. In the symmetric configuration, i.e., with the gap located at the center of the antenna axis, reducing gap size induces a significant red-shift of the maximum conversion efficiency peak. Either enhancement or inhibition of second-harmonic emission may be observed as gap size is decreased, depending on the antenna mode excited at the harmonic frequency. The second-harmonic signal is extremely sensitive to the asymmetry introduced by gap’s displacements with respect to the …

Impact Of Detector-Element Active-Area Shape And Fill Factor On Image Sampling, Restoration, And Super-Resolution, Russell C. Hardie, Douglas R. Droege, Alexander J. Dapore, Mark E. Greiner

Electrical and Computer Engineering Faculty Publications

In many undersampled imaging systems, spatial integration from the individual detector elements is the dominant component of the system point spread function (PSF). Conventional focal plane arrays (FPAs) utilize square detector elements with a nearly 100% fill factor, where fill factor is defined as the fraction of the detector element area that is active in light detection. A large fill factor is generally considered to be desirable because more photons are collected for a given pitch, and this leads to a higher signal-to-noise-ratio (SNR). However, the large active area works against super-resolution (SR) image restoration by acting as an additional …

True Linearized Intensity Modulation For Photonic Analog To Digital Conversion Using An Injection-Locked Mode-Locked Laser, Edris Sarailou

Electronic Theses and Dissertations

A true linearized interferometric intensity modulator for pulsed light has been proposed and experimentally presented in this thesis. This has been achieved by introducing a mode-locked laser into one of the arms of a Mach-Zehnder interferometer and injection-locking it to the input light (which is pulsed and periodic). By modulating the injection-locked laser, and combining its output light with the light from the other arm of interferometer in quadrature, one can achieve true linearized intensity modulator. This linearity comes from the arcsine phase response of the injection-locked mode-locked laser (as suggested by steady-state solution of Adler's equation) when it is …

Broadband Coherent Perfect Absorption In One-Dimensional Optical Systems, Massimo Maximilian Villinger

Electronic Theses and Dissertations

Absorption plays a critical role in a variety of optical applications – sometimes it is desirable to minimize it as in optical fibers and waveguides, or to enhance it as in solar cells and photodetectors. We describe here a new optical scheme that controllably produces high optical absorption over a broad wavelength range (hundreds of nm) in systems that have low intrinsic absorption over the same range. This effect, 'coherent perfect absorption' or CPA, arises from a subtle interplay between interference and absorption of two beams incident on a weakly absorbing medium. In the first part of this study, we …

An Optical Sprayer Nozzle Flow Rate Sensor, Joseph S. Dvorak, Luke E. Bryant

Biosystems and Agricultural Engineering Faculty Publications

Ensuring proper flow rates from each nozzle on an agricultural sprayer has become even more important as advances continue to be made in precision application technology. In this article, we describe the structure and testing of a sensor technology based on optical cross-correlation to determine the flow rate of individual sprayer nozzles. An advantage of this technology is that it does not require that impellers or other components be placed in the flow, which could cause plugging. The only moving part in the entire system is a solenoid used to inject a tracer dye. The objective of this study was …

A Collaborative Adaptive Wiener Filter For Multi-Frame Super-Resolution, Khaled M. Mohamed, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Factors that can limit the effective resolution of an imaging system may include aliasing from under-sampling, blur from the optics and external factors, and sensor noise. Image restoration and super-resolution (SR) techniques can be used to improve image resolution. One SR method, developed recently, is the adaptive Wiener filter (AWF) SR algorithm. This is a multi-frame SR method that combines registered temporal frames through a joint nonuniform interpolation and restoration process to provide a high-resolution image estimate. Variations of this method have been demonstrated to be effective for multi-frame SR, as well demosaicing RGB and polarimetric imagery. While the AWF …

Robust Super-Resolution By Fusion Of Interpolated Frames For Color And Grayscale Images, Barry K. Karch, Russell C. Hardie

Electrical and Computer Engineering Faculty Publications

Multi-frame super-resolution (SR) processing seeks to overcome undersampling issues that can lead to undesirable aliasing artifacts in imaging systems. A key factor in effective multi-frame SR is accurate subpixel inter-frame registration. Accurate registration is more difficult when frame-to-frame motion does not contain simple global translation and includes locally moving scene objects. SR processing is further complicated when the camera captures full color by using a Bayer color filter array (CFA). Various aspects of these SR challenges have been previously investigated. Fast SR algorithms tend to have difficulty accommodating complex motion and CFA sensors. Furthermore, methods that can tolerate these complexities …

Construction And Optimization Of A Tapered Amplifier System For Applications In Ultra-Cold Plasma Research, Ryan Cole

Honors Theses

The number density of cold atoms confined in a magneto-optical trap (MOT) is critically dependent on the intensity of the lasers used to cool the sample. To generate large optical powers while retaining the practicality of homemade external cavity diode lasers (ECDLs), a tapered amplifier (TA) system was designed and constructed to amplify the output of an existing 780 nm, continuous-wave ECDL. The amplifier’s performance is discussed in terms of its gain and power output. Under standard operating conditions, optical amplification of 12 dB is achieved, with a maximum power output of 0.75 W. The completed amplifier is installed into …

Novel Techniques For Quasi Three-Dimensional Nanofabrication Of Transformation Optics Devices, Paul R. West

Open Access Dissertations

Current nanofabrication is almost exclusively limited to top-down, two-dimensional techniques. As technology moves more deeply into the nano-scale regime, fabrication of new devices with quasi three-dimensional geometries shows great potential. One excellent example of an emerging field that requires this type of non-conformal 3D fabrication technique is the field of Transformation Optics. This field involves transforming and manipulating the optical space through which light propagates. Arbitrarily manipulating the optical space requires advanced fabrication techniques, which are not possible with current two-dimensional fabrication technologies. One step toward quasi three-dimensional nanofabrication involves employing angled deposition allowing new growth mechanisms, and enabling a …

Optical Metrology For Directed Self-Assembly Patterning Using Mueller Matrix Spectroscopic Ellipsometry Based Scatterometry, Dhairya J. Dixit

Legacy Theses & Dissertations (2009 - 2024)

The semiconductor industry continues to drive patterning solutions that enable devices with higher memory storage capacity, faster computing performance, lower cost per transistors, and higher transistor density. These developments in the field of semiconductor manufacturing along with the overall minimization of the size of transistors require cutting-edge metrology tools for characterization.

An Assessment Of Critical Dimension Small Angle X-Ray Scattering Metrology For Advanced Semiconductor Manufacturing, Charles Michael Settens

Legacy Theses & Dissertations (2009 - 2024)

Simultaneous migration of planar transistors to FinFET architectures, the introduction of a plurality of materials to ensure suitable electrical characteristics, and the establishment of reliable multiple patterning lithography schemes to pattern sub-10 nm feature sizes imposes formidable challenges to current in-line dimensional metrologies. Because the shape of a FinFET channel cross-section immediately influences the electrical characteristics, the evaluation of 3D device structures requires measurement of parameters beyond traditional critical dimension (CD), including their sidewall angles, top corner rounding and footing, roughness, recesses and undercuts at single nanometer dimensions; thus, metrologies require sub-nm and approaching atomic level measurement uncertainty.

Phase Imaging Using X-Ray Optics, Bushra Kanwal

Legacy Theses & Dissertations (2009 - 2024)

Conventional x-ray imaging is a widely used imaging technique in medical diagnostics as well as material analysis. It utilizes only absorption-contrast imaging, which records intensity attenuation due to absorption. A major limitation of this technique for medical imaging is the poor contrast of weakly absorbing details in the soft tissue. Mammography and angiography are two examples where improved contrast is required. In the quest for better contrast in x-ray imaging, a number of different phase contrast imaging techniques have been explored. Phase contrast imaging offers an improvement over traditional absorption contrast because the x-ray wave field traversing an object experiences …

Transverse Mode Selection And Brightness Enhancement In Laser Resonators By Means Of Volume Bragg Gratings, Brian Anderson

Electronic Theses and Dissertations

The design of high power lasers requires large mode areas to overcome various intensity driven nonlinear effects. Increasing the aperture size within the laser can overcome these effects, but typically result in multi-transverse mode output and reduced beam quality, limiting the brightness of the system. As one possible solution, the angular selectivity of a diffractive optical element is proposed as a spatial filter, allowing for the design of compact high brightness sources not possible with conventional methods of transverse mode selection. This thesis explores the angular selectivity of volume Bragg gratings (VBGs) and their use as spatial transverse mode filters …

Nano And Nanostructured Materials For Optical Applications, Panit Chantharasupawong

Electronic Theses and Dissertations

Nano and nanostructured materials offer unique physical and chemical properties that differ considerably from their bulk counterparts. For decades, due to their fascinating properties, they have been extensively explored and found to be beneficial in numerous applications. These materials are key components in many cutting-edge optic and photonic technologies, including photovoltaics, waveguides and sensors. In this dissertation, the uses of nano and nanostructured materials for optical applications are investigated in the context of optical limiting, three dimensional displays, and optical sensing. Nanomaterials with nonlinear optical responses are promising candidates for self-activating optical limiters. In the first part of this study, …

The Subject Librarian Newsletter, Creol, Fall 2015, Patti Mccall

Libraries' Newsletters

No abstract provided.

Nanoscale Control Of Gap-Plasmon Enhanced Optical Processes, Chatdanai Lumdee

Electronic Theses and Dissertations

Surface plasmon resonances of metal nanostructures have been studied intensely in recent years. The strong plasmon-mediated electric field enhancement and field confinement well beyond the diffraction limit has been demonstrated to improve the performance of optical devices including ultrasensitive sensors, light emitters, and optical absorbers. A plasmon resonance mode of particular recent interest is the gap plasmon resonance that occurs on closely spaced metallic structures. In contrast to plasmon resonances supported by isolated metal nanostructures, coupled nanostructures provide additional spectral and spatial control over the plasmon resonance response. For example, the resonance frequencies of metal nanoparticle dimers depend strongly on …

Optical Propagation Of Self-Sustaining Wavefronts And Nonlinear Dynamics In Parabolic Multimode Fibers, Matthew Mills

Electronic Theses and Dissertations

The aim of this thesis is to introduce my work which has generally been focused on optical wavefronts that have the unusual property of resisting commonplace phenomena such as diffraction and dispersion. Interestingly, these special beams are found both in linear and nonlinear situations. For example, in the linear regime, localized spatio-temporal waves which resemble the spherical harmonic symmetries of the hydrogen quantum orbitals can simultaneously negotiate both diffractive and dispersive effects. In the nonlinear regime, dressed optical filaments can be arranged to propagate multi-photon produced plasma channels orders of magnitude longer than expected. The first portion of this dissertation …

Towards High-Flux Isolated Attosecond Pulses With A 200 Tw Cpa, Eric Cunningham

Electronic Theses and Dissertations

Attosecond pulses have been developed as a means for investigating phenomena that proceed on the order of the atomic unit of time (24 as). Unfortunately, these extreme ultraviolet (XUV) pulses by themselves contain too few photons to initiate nonlinear dynamics or dress states in an attosecond pump--attosecond probe scheme. As a result, most attosecond experiments thus far have featured complementary near infrared (NIR) femtosecond lasers for instigating electron dynamics. In order to access the benefits of all-attosecond measurements and open attosecond physics to new fields of exploration, the photon flux of these pulses must be increased. One way to boost …

Low Absorption Liquid Crystal Materials For Midwave Infrared, Amy Creekmore

Electronic Theses and Dissertations

Liquid crystal is an amazing class of soft matters with applications spanning from visible, infrared, millimeter wave, to terahertz. In addition to direct-view displays and projection displays, liquid crystal is also widely used in adaptive optics, tunable-focus lens, and laser beam steering. Although the visible region has well developed materials and mixtures for the vast variety of applications, the midwave infrared (MWIR) region of the electromagnetic spectrum invites much development as only a few materials have been developed with these applications in mind. Unlike visible region, the major challenge for mid-wave infrared liquid crystal is inherently large absorption loss. To …

Characterising The Effect Of A Novel Optical Delay Line And Light Sources On The Resolvability Of Time Domain Optical Coherence Tomography, Paul V. Jansz

Theses: Doctorates and Masters

Optical coherence tomography (OCT) is a reflection based imaging technique, with numerous applications, initially in medical diagnostics. Unlike ultrasound, another reflection imaging technique, OCT relies on light scattering in samples, low coherence near- infrared interferometry, and graphical image construction, to acquire 2D and 3D reflectogram images. OCT has resolution an order of magnitude greater than ultrasound, but its depth penetration is less than a few millimetres.

Axial resolution is a critical parameter in determining whether OCT can be used to resolve specific features in a sample image. Typically, measures of resolution have been attributed only to the light source’s characteristics, …

Evaluation Of Static Vs. Dynamic Visualizations For Engineering Technology Students And Implications On Spatial Visualization Ability: A Quasi-Experimental Study, Petros Katsioloudis, Daniel Dickerson, Vukica Jovanovic, Mildred Jones

STEMPS Faculty Publications

The benefit of using static versus dynamic visualizations is a controversial one. Few studies have explored the effectiveness of static visualizations to those of dynamic visualizations, and the current state of the literature remains somewhat unclear. During the last decade there has been a lengthy debate about the opportunities for using animation in learning and instruction. More specifically it has been shown that dynamic visualizations often provide no advantages over static visualizations. If they had shown advantages, it was due to the fact that more information was available in the animated than in the static version. Given this result, the …

Robust Fast Direct Integral Equation Solver For Quasi-Periodic Scattering Problems With A Large Number Of Layers, Min Hyung Cho, Alex H. Barnett

Dartmouth Scholarship

We present a new boundary integral formulation for time-harmonic wave diffraction from two-dimensional structures with many layers of arbitrary periodic shape, such as multilayer dielectric gratings in TM polarization. Our scheme is robust at all scattering parameters, unlike the conventional quasi-periodic Green’s function method which fails whenever any of the layers approaches a Wood anomaly. We achieve this by a decomposition into near- and far-field contributions. The former uses the free-space Green’s function in a second-kind integral equation on one period of the material interfaces and their immediate left and right neighbors; the latter uses proxy point sources and small …