Optics Commons^™

Luminescent Solar Concentrators: A Review Of Recent Results, Wilfrid G.J.H.M. Van Sark, Keith W.J. Barnham, Lenneke H. Slooff, Amanda J. Chatten, Andreas Buchtemann, Andreas Meyer, Sarah Mccormack, Rolf Koole, Daniel J. Farrell, Rahul Bose, Evert E. Bende, Antonius R. Burgers, Tristram Budel, Jana Quilitz, Manus Kennedy, Toby Meyer, C. De Mello Donega, Andries Meijerink

Articles

Luminescent solar concentrators (LSCs) generally consist of transparent polymer sheets doped with luminescent species. Incident sunlight is absorbed by the luminescent species and emitted with high quantum efficiency, such that emitted light is trapped in the sheet and travels to the edges where it can be collected by solar cells. LSCs offer potentially lower cost per Wp. This paper reviews results mainly obtained within the framework of the Fullspectrum project. Two modeling approaches are presented, i.e., a thermodynamic and a ray-trace one, as well as experimental results, with a focus on LSC stability.

Phase And Amplitude Modulated Ofdm For Dispersion Managed Wdm Systems, Andreas Eisele

Electronic Theses and Dissertations

Amplitude and phase modulated optical OFDM (Orthogonal Frequency Division Multiplexing) are analyzed in a 50GBit/s single channel and 40GBit/s 5 channel 512 subcarrier non-ideal dispersion-compensated fiber optic communication systems. PM-OFDM is investigated as an alternative to AM-OFDM to alleviate the problem associated with amplitude-modulated signals in a nonlinear medium. The inherent dispersion compensation capability in OFDM (using a cyclic prefix) allows transmission over a link whose dispersion map is not exactly known. OFDM also mitigates the effects of dispersion slope in wavelength-division multiplexed (WDM) systems. Moreover, the overall dispersion throughout the transmission link may vary due to environmental effects and …

High Power Mode-Locked Semiconductor Lasers And Their Applications, Shinwook Lee

Electronic Theses and Dissertations

In this dissertation, a novel semiconductor mode-locked oscillator which is an extension of eXtreme Chirped Pulse Amplification (XCPA) is investigated. An eXtreme Chirped Pulse Oscillator (XCPO) implemented with a Theta cavity also based on a semiconductor gain is presented for generating more than 30ns frequency-swept pulses with more than 100pJ of pulse energy and 3.6ps compressed pulses directly from the oscillator. The XCPO shows the two distinct characteristics which are the scalability of the output energy and the mode-locked spectrum with respect to repetition rate. The laser cavity design allows for low repetition rate operation < 100MHz. The cavity significantly reduces nonlinear carrier dynamics, integrated self phase modulation (SPM), and fast gain recovery in a Semiconductor optical Amplifier (SOA). Secondly, a functional device, called a Grating Coupled Surface Emitting Laser (GCSEL) is investigated. For the first time, passive and hybrid mode-locking of a GCSEL is achieved by using saturable absorption in the passive section of GCSEL. To verify the present limitation of the GCSEL for passive and hybrid mode-locking, a dispersion matched cavity is explored. In addition, a Grating Coupled surface emitting Semiconductor Optical Amplifier (GCSOA) is also investigated to achieve high energy pulse. An energy extraction experiment for GCSOA using stretched pulses generated from the colliding pulse semiconductor mode-locked laser via a chirped fiber bragg grating, which exploits the XCPA advantages is also demonstrated. Finally, passive optical cavity amplification using an enhancement cavity is presented. In order to achieve the interferometric stability, the Hänsch-Couillaud Method is employed to stabilize the passive optical cavity. The astigmatism-free optical cavity employing an acousto-optic modulator (AOM) is designed and demonstrated. In the passive optical cavity, a 7.2 of amplification factor is achieved with a 50 KHz dumping rate.

Combinatorial Investigation Of Magnetostriction In Fe-Fa And Fe-Ga-Al, Jason R. Hattrick-Simpers, Dwight Hunter, Corneliu M. Craciunescu, Kyu Sung Jang, Makoto Murakami, James Cullen, Manfred Wuttig, Ichiro Takeuchi, Samuel E. Lofland, Leonid Bendersky, Noble Woo, Robert Bruce Vandover, Toshiya Takahashi, Yasubumi Furuya

Faculty Publications

A high-throughput high-sensitivity optical technique for measuringmagnetostriction of thin-film composition-spread samples has been developed. It determines the magnetostriction by measuring the induced deflection of micromachined cantilever unimorph samples. Magnetostrictionmeasurements have been performed on as-deposited Fe–Ga and Fe–Ga–Al thin-film composition spreads. The thin-film Fe–Ga spreads display a similar compositional variation of magnetostriction as bulk. A previously undiscovered peak in magnetostriction at low Ga content was also observed and attributed to a maximum in the magnetocrystalline anisotropy. Magnetostrictive mapping of the Fe–Ga–Al ternary system reveals the possibility of substituting up to 8at.%Al in Fe₇₀Ga₃₀ without significant degradation of magnetostriction.

High-Throughput Screening Of Shape Memory Alloy Thin-Film Spreads Using Nanoindentation, Arpit Dwivedi, Thomas J. Wyrobek, Oden L. Warren, Jason R. Hattrick-Simpers, Olubenga O. Famodu, Ichiro Takeuchi

Faculty Publications

We have demonstrated the utility of nanoindentation as a rapid characterization tool for mapping shape memoryalloy compositions in combinatorial thin-film libraries. Nanoindentation was performed on Ni–Mn–Al ternary composition spreads. The indentation hardness and the reduced elastic modulus were mapped across a large fraction of the ternary phase diagram. The large shape memoryalloy composition region, located around the Heusler composition (Ni₂MnAl), was found to display significant departure in these mechanical properties from the rest of the composition spread. In particular, the modulus and the hardness values are lower for the martensite region than those of the rest of the …

A Mode-Locked Vertical Extended Cavity Surface Emitting Laser, Aoife Deburca

Theses

Surface emitting lasers are a competitive and flexible alternative to edge emitting lasers. The surface-emitting laser has many useful characteristics, which make it beneficial for many applications. These characteristics include the ease of testing during the growth and the fundamental mode output that is effortlessly achieved

The thesis is focused on the Vertical External Cavity Surface Emitting Laser due to its increased flexibility beyond that of the Vertical Cavity Surface Emitting Laser. A wide range of possible parameters are detailed allowing for flexibility in design and applications.

Optically pumped pulsed cavity configurations were investigated in relation to intra-cavity devices and …

Optical Solitons In Periodic Structures, Konstantinos Makris

Electronic Theses and Dissertations

By nature discrete solitons represent self-trapped wavepackets in nonlinear periodic structures and result from the interplay between lattice diffraction (or dispersion) and material nonlinearity. In optics, this class of self-localized states has been successfully observed in both one-and two-dimensional nonlinear waveguide arrays. In recent years such lattice structures have been implemented or induced in a variety of material systems including those with cubic (Kerr), quadratic, photorefractive, and liquid-crystal nonlinearities. In all cases the underlying periodicity or discreteness leads to new families of optical solitons that have no counterpart whatsoever in continuous systems. In the first part of this dissertation, a …

Method For Characterization Of Diffusion Properties Of Photopolymerisable Systems, Tzvetanka Babeva, Izabela Naydenova, Suzanne Martin, Vincent Toal

Articles

A novel approach for measuring the diffusion coefficients in photopolymerisable materials is proposed. The method is based on studying the evolution of the surface relief profile in a single illuminated spot using an interferometric surface profiler. It is shown that the observed post-exposure swelling in the illuminated spot is due to mass-transport of monomer from the unexposed to the exposed area driven by a monomer concentration gradient set up by the monomer polymerization in the exposed area. Appropriate choice of the thickness of the studied layers ensures both lateral movement of monomer and negligible contribution from the depth. The diffusion …

Implementation Of Phase-Only Modulation Utilizing A Twisted Nematic Liquid Crystal Spatial Light Modulator, Mohammad Mahmud, Izabela Naydenova, Vincent Toal

Articles

Twisted nematic liquid crystal spatial light modulators, (SLM) are widely used for amplitude modulation of light. The technique for measuring phase and amplitude modulation introduced by a twisted nematic cell is not new but the novelty here is that after characterisation of a Holoeye LC2002 TNLC device we were able to identify specific conditions that allow for its use as a pure 180 degree or more, phase modulator with little or no amplitude modulation at 514.5 nm laser wavelength. The phase shift introduced by the SLM was measured using a Mach-Zehnder interferometer. The experimentally measured and the theoretically predicted intensity …

Fabrication Of Switchable Liquid Crystal Devices Using Surface Relief Gratings In Photopolymer, Pavani Kotakonda, Izabela Naydenova, Robert Howard, Suzanne Martin, Vincent Toal

Articles

Holographically recorded surface relief gratings in dry, self-developing acrylamide based photopolymer were used to fabricate two types of switchable liquid crystal (LC) device. One is an electrically switchable LC diffraction grating and the other is an electrically switchable polarization rotator. The electrically switchable diffraction grating was characterized by measuring the dependence of the intensity in the first diffracted order on the applied electric field. The polarization rotator was characterized by studying the influence of the applied electric field on the twist angle and the variation of intensity in the zero and the first orders of diffraction.

Nanocomposites For Novel Holographic Applications, Izabela Naydenova, Svetlana Mintova, Suzanne Martin, Vincent Toal

Articles

Nanozeolites incorporated into photopolymerizable holographic recording materials can be used for holographic sensing, data storage, and optical systems design.

Design And Optimization Of Nanostructured Optical Filters, Jeremiah Brown

Electronic Theses and Dissertations

Optical filters encompass a vast array of devices and structures for a wide variety of applications. Generally speaking, an optical filter is some structure that applies a designed amplitude and phase transform to an incident signal. Different classes of filters have vastly divergent characteristics, and one of the challenges in the optical design process is identifying the ideal filter for a given application and optimizing it to obtain a specific response. In particular, it is highly advantageous to obtain a filter that can be seamlessly integrated into an overall device package without requiring exotic fabrication steps, extremely sensitive alignments, or …

Low Noise, High Repetition Rate Semiconductor-Based Mode-Locked Lasers For Signal Processing And Coherent Communications, Franklyn Quinlan

Electronic Theses and Dissertations

This dissertation details work on high repetition rate semiconductor mode-locked lasers. The qualities of stable pulse trains and stable optical frequency content are the focus of the work performed. First, applications of such lasers are reviewed with particular attention to applications only realizable with laser performance such as presented in this dissertation. Sources of timing jitter are also reviewed, as are techniques by which the timing jitter of a 10 GHz optical pulse train may be measured. Experimental results begin with an exploration of the consequences on the timing and amplitude jitter of the phase noise of an RF source …

Ultrashort Laser Pulse Interaction With Photo-Thermo-Refractive Glass, Leo Siiman

Electronic Theses and Dissertations

Photo-thermo-refractive (PTR) glass is an ideal photosensitive material for recording phase volume holograms. It is a homogeneous multi-component silicate glass that demonstrates all the advantages of optical glass: thermal stability, high laser damage threshold, and a wide transparency range. Moreover the ability to record phase patterns (i.e. spatial refractive index variations) into PTR glass has resulted in the fabrication of volume holograms with diffraction efficiency greater than 99%. The conventional method of recording a hologram in PTR glass relies on exposure to continuous-wave ultraviolet laser radiation. In this dissertation the interaction between infrared ultrashort laser pulses and PTR glass is …

Cholesteric Liquid Crystal Photonic Crystal Lasers And Photonic Devices, Ying Zhou

Electronic Theses and Dissertations

This dissertation discusses cholesteric liquid crystals (CLCs) and polymers based photonic devices including one-dimensional (1D) photonic crystal lasers and broadband circular polarizers. CLCs showing unique self-organized chiral structures have been widely used in bistable displays, flexible displays, and reflectors. However, the photonic band gap they exhibit opens a new way for generating laser light at the photonic band edge (PBE) or inside the band gap. When doped with an emissive laser dye, cholesteric liquid crystals provide distributed feedback so that mirrorless lasing is hence possible. Due to the limited surface anchoring, the thickness of gain medium and feedback length is …

Integrated Optical Spr (Surface Plasmon Resonance) Sensor Based On Optoelectronic Platform, Hyungseok Bang

Electronic Theses and Dissertations

Current major demands in SPR sensor development are system miniaturization and throughput improvement. Structuring an array of integrated optical SPR sensor heads on a semiconductor based optoelectronic platform could be a promising solution for those issues, since integrated optical waveguides have highly miniaturized dimension and the optoelectronic platform enables on-chip optical-to-electrical signal conversion. Utilizing a semiconductor based platform to achieve optoelectronic functionality poses requirements to the senor head; the sensor head needs to have reasonably small size while it should have reasonable sensitivity and fabrication tolerance. This research proposes a novel type of SPR sensor head and demonstrates a fabricated …

Extended Focus Range High Resolution Endoscopic Optical Coherence Tomography, Kye-Sung Lee

Electronic Theses and Dissertations

Today, medical imaging is playing an important role in medicine as it provides the techniques and processes used to create images of the human body or parts thereof for clinical purposes (medical procedures seeking to reveal, diagnose or examine disease) or medical science (including the study of normal anatomy and function). Modalities are developing over time to achieve the highest possible resolution, speed of image acquisition, sensitivity, and specificity. In the past decade, advances in optics, fiber, as well as laser technology have enabled the development of noninvasive optical biomedical imaging technology that can also be applied to endoscopy to …