Optics Commons^™

Theoretical Model Analysis Of Absorption Of A Three Level Diode Pumped Alkali Laser, Charlton D. Lewis Ii

Theses and Dissertations

This paper models the absorption phenomena of light in a three level diode pumped alkali laser system. Specifically this model calculates for a user defined set of system parameters the attenuation of the input pump beam and characteristics of the bleached wave. Using Wolfram's Mathematical 6.0 software all necessary physics for an accurate description of absorption was modeled from first principles: energy levels, cross sections, spin-orbit kinetic processes, saturation frequencies, pump attenuation, and differential transmittance, which is a representation of the bleached wave. A specific DPAL scenario was simulated, 455K system temperature, alkali concentration of 6.1 - 10¹³, …

Real-Time Plasma Controlled Chemistry In A Two-Frequency, Confined Plasma Etcher, Vladimir Milosavljevic, Albert R. Ellingboe, Cezar Gaman, John V. Ringwood

Articles

The physics issues of developing model-based control of plasma etching are presented. A novel methodology for incorporating real-time model-based control of plasma processing systems is developed. The methodology is developed for control of two dependent variables (ion flux and chemical densities) by two independent controls (27 MHz power and O2flow). A phenomenological physics model of the nonlinear coupling between the independent controls and the dependent variables of the plasma is presented. By using a design of experiment, the functional dependencies of the response surface are determined. In conjunction with the physical model, the dependencies are used to deconvolve the sensor …

A Mode-Locked Vertical Extended Cavity Surface Emitting Laser, Aoife Deburca

Theses

Surface emitting lasers are a competitive and flexible alternative to edge emitting lasers. The surface-emitting laser has many useful characteristics, which make it beneficial for many applications. These characteristics include the ease of testing during the growth and the fundamental mode output that is effortlessly achieved

The thesis is focused on the Vertical External Cavity Surface Emitting Laser due to its increased flexibility beyond that of the Vertical Cavity Surface Emitting Laser. A wide range of possible parameters are detailed allowing for flexibility in design and applications.

Optically pumped pulsed cavity configurations were investigated in relation to intra-cavity devices and …

Practical Sensor For Measurement Of Nitrogen, Dusan Popovic, Vladimir Milosavljevic, Steven Daniels

Articles

This paper presents a method for precise measurement of atomic and molecular nitrogen in an oxygen-nitrogen dc plasma. This is achieved by monitoring the intensities of the atomic nitrogen spectral line at 821.6 nm and the molecular nitrogen bandhead at 337.1 nm, relative to the atomic oxygen spectral line at 844.7 nm. Oxygen is one of the most frequently used gases for surface chemical treatment, including deposition and etching, therefore the ability to measure and control the process and chemical composition of the process is essential. To validate this oxygen actimometry method for N2-xO2 (where x varies from 0 to …

X-Ray Generation From Metal Targets Coated With Wavelength-Scale Spheres, D. R. Symes, H. A. Sumeruk, I. V. Churina, Thomas D. Donnelly, J. Landry, T. Ditmire

All HMC Faculty Publications and Research

X-ray yield measurements from targets coated with wavelength-scale spheres are compared with measurements from polished targets. Evidence for a hotter resonant electron temperature due to field enhancements from Mie resonances in the spheres is investigated.

Einstein’S Impact On Optics At The Frontier, Donald Umstadter

Donald Umstadter Publications

The seminal contributions made by Einstein a century ago have enabled a new frontier area of science, called high-field science. This research involves the physics of the interactions of matter with electromagnetic fields at its highest levels ever achieved in the laboratory. Besides being of fundamental importance to physics research, the discoveries being made in this area are also leading to a new generation of compact and ultrashort-duration particle accelerators and X-ray light sources, with applications ranging from nuclear fusion to cancer therapy.

Single-Mode Raman Fiber Laser In A Multimode Fiber, Matthew B. Crookston

Theses and Dissertations

The feasibility of a transverse single-mode Raman fiber laser using a multimode fiber has been investigated. The Raman fiber laser operates in low-order transverse modes despite the fact the fiber supports multimode beam propagation. The performance characteristics of the Raman fiber laser are compared with those of the single-pass SRS beam.

Optical Characterization Of Antimony-Based, Types-I And Ii, Multiple Quantum-Well Semiconductor Structures For Mid-Infrared Laser Applications, Edward G. Ferguson

Theses and Dissertations

This experiment characterizes antimony-based, multiple quantum-well, types-I and -II, semiconductor samples designed for laser applications. The samples emit light in the 3-5-micron range to exploit an atmospheric transmission window, making them ideal for infrared (IR)-seeking missile countermeasures. Photoluminescence (PL) spectra were collected and yielded bandgap (E(sub g)) dependence-on-temperature relationships. The type-I sample was found to follow the Varshni equation, while the type-II samples showed a rise with temperature in a portion of the curve that should be linear according to the Varshni equation. The type-II samples followed the Varshni equation well at higher temperature. The PL study indicated that the …

Ion Contribution To The Astrophysical Important 447.15, 587.56 And 667.82 Nm He I Spectral Lines Broadening, Vladimir Milosavljevic, Stevan Djenize

Articles

Characteristics of the astrophysical important Stark broadened 447.15 nm, 587.56 nm and 667.82 nm spectral line profiles have been measured at electron densities between 0.3 10 and 8.2 10 m and electron temperatures between 8000 and 33 000 K in plasmas created in five various discharge conditions using a linear, low-pressure, pulsed arc as an optically thin plasma source operated in a helium-nitrogen-oxygen gas mixture. On the basis of the observed asymmetry of the line profiles we have obtained their ion broadening parameters ( A) caused by influence of the ion microfield on the line broadening mechanism and also …

Distributed Beacon Requirements For Branch Point Tolerant Laser Beam Compensation In Extended Atmospheric Turbulence, Virgil E. Zetterlind Iii

Theses and Dissertations

Branch point tolerant phase reconstructors can vastly improve adaptive optic system performance in extended atmospheric turbulence. This thesis explores the performance bounds of two such reconstructors Goldstein's algorithm and hidden phase. A least squares reconstructor is implemented for comparison. System performance is presented for various scenarios, including correction time-delays, wave-front sensor noise, and extended beacons. These scenarios are of interest for laser communication and directed energy systems such as Airborne Laser. Performance bounds are obtained through wave-optics simulation. The extended beacon propagation geometry approximates the USAF AFRL-DE North Oscura Peak range. Results show that branch point tolerant reconstructors outperform least …

Development Of A Tm:Ho:Ylf-Laser-Pumped Orientation-Patterned Gallium Arsenide Optical Parametric Oscillator, Michael D. Harm

Theses and Dissertations

Coherent optical sources in the mid-infrared region (mid-IR) are important fundamental tools for infrared countermeasures and battlefield remote sensing. Nonlinear optical effects can be applied to convert existing near-IR laser sources to radiate in the mid-IR. This research focused on achieving such a conversion with a quasi-phase matched optical parametric oscillators using orientation-patterned gallium arsenide (OPGaAs), a material that can be quasi-phased matched by periodically reversing the crystal structure during the epitaxial growth process. Although non-linear optical conversion was not ultimately achieved during this research, many valuable lessons were learned from working with this material. This thesis reviews the theory …

Acceleration Element For Femtosecond Electron Pulse Compression, Bao-Liang Qian, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

An acceleration element is proposed for compressing the electron pulse duration in a femtosecond photoelectron gun. The element is a compact metal cavity with curved-shaped walls. An external voltage is applied to the cavity where a special electric field forms in such a way that the slow electrons in the electron pulse front are accelerated more than the fast electrons, and consequently the electron pulse duration will be compressed. The distribution of the electric field inside the acceleration cavity is analyzed for the geometry of the cavity. The electron dynamics in this acceleration cavity is also investigated numerically. Numerical results …

Optical Coherent Communication System Using Phase Shift Keying, Syed Javaid Iqbal

Student Works (2000-2009)

This thesis presents the experimental study and design of a coherent communication system by using phase shift keying (PSK). Systems are designed by using all passive elements, which make the system very easy to operate, and less maintenance is required. All the PSK designs are based on a single light source. In this thesis there are five different types of PSK with a single light source communication systems are designed. All designs are experimentally tested in free space. The systems are • All optical two-channel PSK communication system, by using single light source, "All optical single channel, two-way PSK communication, …

Investigation Of Laser Beam Combining And Cleanup Via Seeded Stimulated Brillouin Scattering In Multimode Optical Fibers, Bryan J. Choi

Theses and Dissertations

The purpose of this thesis research was to determine if stimulated Brillouin scattering amplification in multimode optical fibers would exhibit the same laser beam combining and clean-up properties exhibited by SBS oscillation, and to characterize the Brillouin amplification process in a multimode optical fiber. Beam combining in multimode fibers via SBS is being considered as a method of combining low power laser beams into a single beam having higher power and superior spatial coherence for applications such as electro-optic countermeasures. Experimental results demonstrate seeding a 9.5 mm fiber significantly reduced the pump power required to initiate SBS. An amplified Stokes …

Optimisation Of Transverse Arc Array Laser, Albert Kok Foo Ng

Student Works (2000-2009)

A novel discharge scheme is proposed for the pumping of short wavelen,gth lasers. This scheme had been tested to produce fast current pulse and a 5 kA current in 60 nsec is obtained. Lasing action has been observed by using nitrogen gas. The laser line is 337 nm from the strong transitions of nitrogen molecules. The new discharge scheme is based on the concept of an arc array amplifier. It essentially consists of 48 pairs of electrodes which are lined up to form an array of arc discharge. Its electrical circuitry allows each pair of the electrodes to be decoupled …

Experimental Investigation And Computer Modeling Of Optical Switching In Distributed Bragg Reflector And Vertical Cavity Surface Emitting Laser Structures, Richard J. Bagnell

Theses and Dissertations

The optical switching capabilities of Distributed Bragg Reflector (DBR) structures, including Vertical Cavity Surface Emitting Lasers (VCSELs) are examined. Reflectivity switching is demonstrated using both thermal and carrier generated effects to alter the DBR/VCSEL layers' refractive indices. Optical bistability is demonstrated at room temperature, under CW photopumped excitation. The optical bistability hysteresis is controllable by spectral location of the pump on the stop band edge. In the VCSEL, reflective bistability is also evidenced; additionally, this bistability is accompanied by a bistability in the VCSEL lasing output intensity, spot size, and wavelength. Modeling of the DBR/VCSEL thermally induced bistability was accomplished …

X-Rays From Microstructured Targets Heated By Femtosecond Lasers, S. P. Gordon, Thomas D. Donnelly, A. Sullivan, H. Hamster, R. W. Falcone

All HMC Faculty Publications and Research

We have demonstrated efficient conversion of ultrashort-pulse laser energy to x rays with energies above 1 keV, using laser-produced plasmas generated on a variety of microstructured surfaces. Lithographically produced grating targets generated 0.1 mJ of kilo-electron-volt x rays, and porous gold and aluminum targets emitted 1 mJ. This represents an improvement of a factor of 100 over flat targets. The K-shell emission spectrum of porous aluminum was composed primarily of heliumlike spectral lines.

An Optically Pumped Molecular Bromine Laser, Jon W. Morrison

Theses and Dissertations

An optically pumped molecular bromine laser was studied to investigate the quenching kinetics state of Br2. This included characterization of the pressure dependence of the laser output power. The approach was to excite molecular bromine in a sealed cell with a Nd:YAG pumped dye laser. Unresolved side fluorescence and amplified stimulated emission (ASE) spectra were recorded. ASE offered the advantage of a simpler optical system with no externally induced wavelength dependencies. Stimulated emission as a signal monitor offered greater resolution than side fluorescence spectra and facilitated spectroscopic assignment.

Crystal Structure Determination Of Β-Lactoglobulin From Electron Micrographs, Richard Roeter

Dissertations and Theses

Often electron micrographs exhibit a repeating structure. Sometimes this repeating structure satisfies the definition of a crystal in that it has a three dimensional repeating structure. If the unit cell structure of this repeating structure can be determined it can be used to help categorize different sections of a particular sample. In some cases, the use of optical diffraction analysis of electron micrographs with repeating structure is a method of determining the unit cell structure.

Samples of β-Lactoglobulin were prepared for viewing in the electron microscope using both the crystalline material and carbon replicas of the crystal surface. Because the …

Electron Optical Study Of A Secondary Electron Multiplier, Chang Min Shen

Dissertations and Theses

Electron orbital theory was applied to the design of the geometrical structure of an electron multiplier for an image intensifier. A special structure satisfying production requirements was studied. Electron optical calculations consisted of determining the potential distribution and tracing the electron trajectories. Liebmann's procedure was used to solve Laplace's equation with constant potentials on the multiplier electrodes as boundary conditions. The trajectories were determined by solving the equation of motion in an electrostatic field using a Runge-Kutta procedure. The initial conditions for the trajectories were the initial energies, initial positions, and the initial directions of the secondary electrons. The plotted …