Fluid Dynamics Commons^™

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

A Comparison And Investigation Of 2d Axisymmetric And 3d Models For The Wave Augmented Varicose Explosions Atomizer, Caleb Miller

Senior Honors Theses

Atomization of non-Newtonian, high-viscosity fluids is a challenging task with many applications. One method of atomizing these types of flows is the Wave Augmented Varicose Explosions (WAVE) atomizer. Using this framework, the study establishes an analysis methodology, investigates the relationship between 2D axisymmetric (2DA) and 3D models, and provides analysis of geometric, non-geometric, and non-dimensional parameter influences on the atomizer characterization in 2DA models. The study found that 2DA models can provide viable predictions of certain 3D model characteristics, established several mathematical models for parameter relationships among 2DA models, and identified certain metrics as inadequate predictors of atomizer characteristics in …

Improving Static Cold Storage Life Of The Human Heart Before Transplant, Juan Sebastian Rodriguez Paez

Theses and Dissertations

Organ storage and transportation are critical steps for the success of organ transplantation. Static cold storage (SCS) of hearts for heart transplantation (HTx) remains the standard approach. However, SCS may involve damage to the tissue resulting from extended hypothermic preservation, potentially affecting organ viability. More over, the temperature distribution on and within the heart is unknown during heart transplantation. Therefore, there is an interest to study different stages of the heart transplantation process towards determining the 3D temperature distribution on and within the heart. There could be a possibility of having a hypothermic injury in different parts of the heart …

Numerical Investigation And Statistical Analysis Of The Flow Patterns Behind Square Cylinders Arranged In A Staggered Configuration Utilizing The Lattice Boltzmann Method, M. Abid, N. Yasin, M. Saqlain, S. Ul-Islam, S. Ahmad

Mathematics & Statistics Faculty Publications

Flow past bluff bodies like square cylinders is important in engineering applications, but flow patterns behind staggered cylinder arrangements remain poorly understood. Existing studies have focused on tandem or side-by-side configurations, while offset orientations have received less attention. The aim of this paper is to numerically investigate flow dynamics and force characteristics behind two offset square cylinders using the single relaxation time lattice Boltzmann method. The effects of changing both the Reynolds number (Re = 1-150) and gap spacing ratio (g* = 0.5-5) between the cylinders are analyzed. Instantaneous vorticity contours, time histories of drag and lift coefficients, power spectra …

Numerical Study Of Owls' Leading-Edge Serrations, Asif Shahriar Nafi, Nikolaos Beratlis, Elias Balaras, Roi Gurka

Physics and Engineering Science

Owls' silent flight is commonly attributed to their special wing morphology combined with wingbeat kinematics. One of these special morphological features is known as the leading-edge serrations: rigid miniature hook-like patterns found at the primaries of the wings' leading-edge. It has been hypothesized that leading-edge serrations function as a passive flow control mechanism, impacting the aerodynamic performance. To elucidate the flow physics associated with owls' leading-edge serrations, we investigate the flow-field characteristic around a barn owl wing with serrated leading-edge geometry positioned at 20° angle of attack for a Reynolds number of 40 000. We use direct numerical simulations, where …

Microscale To Mesoscale Modeling Of The Ocean Under Tropical Cyclones: Effects Of Sea Spray And Surfactants On Tropical Cyclone Intensity And Air-Sea Gas Exchange, Breanna Lynn Cain Vanderplow

All HCAS Student Capstones, Theses, and Dissertations

Tropical cyclone intensity prediction remains a challenge despite computational and observational developments because successful intensity forecasting requires implementing a multitude of atmospheric and oceanic processes. Hurricane Maria 2017 and Hurricane Dorian 2019 serve as prime examples of rapidly intensifying storms that devastated communities in the Caribbean. A lack of understanding and parameterization of crucial physics involved in tropical cyclone intensity in existing forecast models may have led to these and other forecasting errors.

Microscale physical processes at the air-sea interface are a major factor in intensification of tropical cyclones that are often unaccounted for in forecasting models since they are …

Hydrodynamic Investigation Of The Discharge Of Complex Fluids From Dispensing Bottles Using Experimental And Computational Approaches, Baran Teoman

Dissertations

The discharge of non-Newtonian, complex fluids through orifices of industrial tanks, pipes, dispensers, or packaging containers is a ubiquitous but often problematic process because of the complex rheology of such fluids and the geometry of the containers. This, in turn, reduces the discharge rate and results in residual fluid left in the container, often referred to as heel. Heel formation is undesired in general, since it causes loss of valuable material, container fouling, and cross-contamination between batches. Heel may be of significant concern not only in industrial vessels but also in consumer packaging. Despite its relevance, the research in this …

Hydrodynamic Characterization Of Laboratory And Production Equipment For Pharmaceutical Testing And Manufacturing Using Experimental And Computational Approaches, Chadakarn Sirasitthichoke

Dissertations

The hydrodynamics of process units used in pharmaceutical industry, i.e., the distribution of velocity profiles and shear stresses within the vessel, often controls the process performance, significantly affecting product quality. The hydrodynamics is strongly influenced by several factors such as the vessel shape, stirrer type, presence of internals and baffles, agitation intensity, and liquid properties. Most of these parameters can be varied by the process designers and the operators to achieve the desired process outcomes. The impact of the hydrodynamics on the process outcome can be profound in both large vessels (e.g., reactors) and smaller vessels (e.g., dissolution vessels), involving …

An Examination Of Fontan Circulation Using Differential Equation Models And Numerical Methods, Vanessa Maybruck

Honors Student Research

Certain congenital heart defects can lead to the development of only a single pumping chamber, or ventricle, in the heart instead of the usual two ventricles. Individuals with this defect undergo a corrective, three-part surgery, the third step of which is the Fontan procedure, but as the patients age, their cardiovascular health will likely deteriorate. Using computational fluid dynamics and differential equations, Fontan circulation can be modeled to investigate why the procedure fails and how Fontan failure can be maximally prevented. Borrowing from well-established literature on RC circuits, the differential equation models simulate systemic blood flow in a piecewise, switch-like …

Effects Of Surfactants On The Generation Of Sea Spray During Tropical Cyclones, Breanna L. Vanderplow

All HCAS Student Capstones, Theses, and Dissertations

Despite significant improvement in computational and observational capabilities, predicting intensity and intensification of major tropical cyclones remains a challenge. In 2017 Hurricane Maria intensified to a Category 5 storm within 24 hours, devastating Puerto Rico. In 2019 Hurricane Dorian, predicted to remain tropical storm, unexpectedly intensified into a Category 5 storm and destroyed the Bahamas. The official forecast and computer models were unable to predict rapid intensification of these storms. One possible reason for this is that key physics, including microscale processes at the air-sea interface, are poorly understood and parameterized in existing forecast models.

Under tropical cyclones, the air-sea …

Computational Fluid Dynamics Study Of The Effects Of Secondary Flows In 90-Degree Pipe Elbow Erosion, O. Ayala, G. Rivera-Hernández, C. Knight

Engineering Technology Faculty Publications

Computational fluid dynamics (CFD) of particle-laden fluid flows through a 90-degree pipe elbow at Reynolds numbers 1,000 and 10,000 were completed; for different dimensionless elbow curvature ratios of 1.0, 1.5, and 2.5; and for particles with different Stokes numbers of 0.01, 0.1, 0.5, 1.0, 5.0, and 10.0. There were two scenarios in the study. For the first, the particles felt drag from the primary (or the axial) flow as well as from the secondary fluid flows in the elbow. For the second, the secondary fluid flow in the 90-degree bend was suppressed from the particle drag, thus the particles only …

Computational Aerothermodynamic Analysis Of Satellite Trans-Atmospheric Skip Entry Survivability, John J. Runco

Theses and Dissertations

Computational aerothermodynamic analysis is presented for a spacecraft in low Earth orbit performing an atmospheric skip entry maneuver. Typically, atmospheric reentry is a terminal operation signaling mission end-of-life and, in some instances, executed for spacecraft disposal. A variation on reentry – skip entry – is an aeroassisted trans-atmospheric maneuver in which a spacecraft utilizes the effects of aerodynamic drag in order to reduce energy prior to a terminal entry, pinpoint a targeted entry, or change orbital elements such as inclination. Spacecraft performing a skip entry enable new modes of maneuver to enhance operations in nominal or possibly contested mission environments. …

Patient-Specific Multiscale Computational Fluid Dynamics Assessment Of Embolization Rates In The Hybrid Norwood: Effects Of Size And Placement Of The Reverse Blalock–Taussig Shunt, Ray Prather, John Seligson, Marcus Ni, Eduardo Divo, Alain J. Kassab, William Decampli

Publications

The hybrid Norwood operation is performed to treat hypoplastic left heart syndrome. Distal arch obstruction may compromise flow to the brain. In a variant of this procedure, a synthetic graft (reverse Blalock–Taussig shunt) is placed between the pulmonary trunk and innominate artery to improve upper torso blood flow. Thrombi originating in the graft may embolize to the brain. In this study, we used computational fluid dynamics and particle tracking to investigate the patterns of particle embolization as a function of the anatomic position of the reverse Blalock–Taussig shunt. The degree of distal arch obstruction and position of particle origin influence …

Automated Cfd Optimization To Maximize Wind Farms Performance And Land Use, Rafael Valotta Rodrigues

Electronic Theses and Dissertations

In this research, a computational system was designed to analyze and optimize the layout of wind farms under variable operational conditions. At first, a wind turbine computational fluid dynamic (CFD) model was developed covering the near wake. The near wake flow field was validated against near wake velocity data from the MEXICO experiment. The CFD simulation demonstrated that the tip speed ratio and the pitch angle greatly influence the near wake behavior, affecting the velocity deficit and the turbulence intensity profile in this region. The CFD model was extended to cover the far wake, aiming to become a computational tool …

Evaluation And Enhancement Of Clean Energy Systems: Analytical, Computational And Experimental Study Of Solar And Nuclear Cycles, Nima Fathi

Mechanical Engineering ETDs

Clean (and specifically renewable) energy is steadily improving its global share. However, finite availability of fossil fuels and the growing effects of climate change make it an urgent priority to convince the industry and governments to incentivize investment in the renewable energy field and to make it more attractive by decreasing the capital cost. Until recently, uncertainties in funding limited renewable energy development, especially in the US. That limitation has been one of the barriers to progress. Another limitation of many renewable energy systems is the variability in their output, which makes them unsuitable for baseline power production. Therefore, fossil …

Computational Fluid Dynamics Is Key To Better Flying Aircraft, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Momentum Transfer To A Simplified Wind Turbine Blade, Myer D. Milbrath

Honors Theses

This project looks into the potential of simplified simulations as a supplement to wind turbine blade designs. The idea is to take a two-dimensional representation of a wind turbine blade and attempt to use a fluid flow simulation to determine which "aspect ratio" is the most efficient in the transfer of momentum. This is then compared to the current requirements for wind turbine blades to judge how accurate the simulation was. It was found that an aspect ratio of 16.66 percent was most efficient, however when compared to the requirements for a wind turbine blade this ratio only falls into …

Parallel Two-Dimensional Unstructured Anisotropic Delaunay Mesh Generation For Aerospace Applications, Juliette Kelly Pardue

Computer Science Theses & Dissertations

A bottom-up approach to parallel anisotropic mesh generation is presented by building a mesh generator from the principles of point-insertion, triangulation, and Delaunay refinement. Applications focusing on high-lift design or dynamic stall, or numerical methods and modeling test cases focus on two-dimensional domains. This push-button parallel mesh generation approach can generate high-fidelity unstructured meshes with anisotropic boundary layers for use in the computational fluid dynamics field.

Multi-Element Airfoil Optimization Using Computational Fluid Dynamics, Mustafa Kubilay Ictuzer

Mechanical & Aerospace Engineering Theses & Dissertations

High-lift systems are frequently used on commercial transport aircrafts to obtain low speed performance, in terms of take-off and landing field lengths and approach speed. To maximize the take-off and landing performance within the critical restrictions required by the new generation transport wing designs, enhanced high-lift technologies are needed. Moreover, the economic realities faced by the airlines require a design that is mechanically simple and effective. These facts lead us to the optimization of the high lift systems.

Optimizing a high-lift system improves an aircraft's take-off and landing performance. The weight of the system, the advantages and the disadvantages all …

Virtualization Of Physical Experiments Using Real-Time Data Generation From A Computational Fluid Dynamics Code, Kaustubh A. Dharwadkar

Mechanical & Aerospace Engineering Theses & Dissertations

This work presents a methodology for mapping physical experiments into real-time, web-based virtual experiments. The four broad elements included in the physical-to-virtual experiment transformation methodology are: (a) computer solution of conservation equations of mass and momentum to generate velocity and pressure (virtual) data that serve as the foundation for recreating the physical phenomenon in the virtual domain; (b) use of virtual pressure and velocity sensing devices to generate signals or readings from computed virtual data that can be observed and read on a computer screen; (c) use of visualization software such as Macromedia FLASH to create a highly interactive environment …

Computational Aerodynamics Study Of Ahmed Body Car Model, Rajat Trehan

Mechanical & Aerospace Engineering Theses & Dissertations

Vehicle Aerodynamics has been the focus of study by researchers for centuries. This interest can be owed to increasing demand on fuel efficiency, vehicle top speed and acceleration performance. Interior aerodynamics, such as engine cooling, air conditioning, wind noise, stability, and cross wind sensitivity play key role in customer satisfaction. Hence a complete understanding of flow around the vehicle is prerequisite to achieve any of the above parameters. Aerodynamic development of motor vehicle is expensive. Much capital must be invested in test facilities such as wind tunnels and climate tunnels. The models are costly and at the beginning of a …

The Microchannel Flow Of A Micropolar Fluid, Guohua Liu

Doctoral Dissertations

Micro-channel flows have been computed to investigate the influence of Navier-Stokes formulation for the slip-flow boundary condition, and a micro-polar fluid model, respectively.

The results of the slip boundary condition show that the current methodology is valid for slip-flow regime (i.e., for values of Knudsen number less than approximately 0.1). Drag reduction phenomena apparent in some micro-channels can be explained by slip-flow theory. These results are in agreement with some computations and experiments.

An ad hoc micro-polar fluid model is developed to investigate the influence of micro effects, such as micro-gyration, in micro-scale flows. The foundation of the ad hoc …

Minimal Norm Constrained Interpolation, Larry Dean Irvine

Mathematics & Statistics Theses & Dissertations

In computational fluid dynamics and in CAD/CAM a physical boundary, usually known only discreetly (say, from a set of measurements), must often be approximated. An acceptable approximation must, of course, preserve the salient features of the data (convexity, concavity, etc.) In this dissertation we compute a smooth interpolant which is locally convex where the data are locally convex and is locally concave where the data are locally concave.

Such an interpolant is found by posing and solving a minimization problem. The solution is a piecewise cubic polynomial. We actually solve this problem indirectly by using the Peano kernel theorem to …