Open Access. Powered by Scholars. Published by Universities.®

Fluid Dynamics Commons™

Open Access. Powered by Scholars. Published by Universities.®

2023

Discipline
Institution
Keyword
Publication
Publication Type

Articles 31 - 53 of 53

Full-Text Articles in Fluid Dynamics

Mathematical Modeling Of Egain Droplets Sliding Down An Inclined Plane, Shawn Koohy, Kathryn Massey, Luis Schneegans, Megan Vezzetti, Keith Hillaire, Souradip Chattopadhyay, Jessie Chen, Carmen Lee, Karen Daniels Apr 2023

Mathematical Modeling Of Egain Droplets Sliding Down An Inclined Plane, Shawn Koohy, Kathryn Massey, Luis Schneegans, Megan Vezzetti, Keith Hillaire, Souradip Chattopadhyay, Jessie Chen, Carmen Lee, Karen Daniels

Undergraduate Research Symposium

Eutectic Gallium-Indium (EGaIn) is a room-temperature liquid metal alloy that dramatically changes its surface tension and dynamics under an applied electric field. EGaIn has been used heavily in soft electronics engineering due to its high conductivity, malleability, and safety. However, the absence of mathematical modeling in the current literature makes its behavior difficult to understand and predict. In this study, we present a one-dimensional lubrication model for the dynamics of an EGaIn droplet moving along an inclined plane. Our model incorporates essential physical effects and parameters including oxidation, capillary action, diffusion, gravity, and Marangoni effects. In particular, we incorporate effects …

Go to article

Practical Implementation Of The Immersed Interface Method With Triangular Meshes For 3d Rigid Solids In A Fluid Flow, Norah Hakami Apr 2023

Practical Implementation Of The Immersed Interface Method With Triangular Meshes For 3d Rigid Solids In A Fluid Flow, Norah Hakami

Mathematics Theses and Dissertations

When employing the immersed interface method (IIM) to simulate a fluid flow around a moving rigid object, the immersed object can be replaced by a virtual fluid enclosed by singular forces on the interface between the real and virtual fluids. These forces represent the impact of the rigid motion on the fluid flow and cause jump discontinuities across the interface in the whole flow field. Then, the IIM resolves the fluid flow on a fixed computational domain by directly incorporating the jump conditions across the interface into numerical schemes. Previous development of the method is limited to simple smooth boundaries. …

Go to article

Numerical Study Of Owls’ Leading-Edge Serrations, Asif Shahriar Nafi Jan 2023

Numerical Study Of Owls’ Leading-Edge Serrations, Asif Shahriar Nafi

Electronic Theses and Dissertations

The silent flight ability of owls is often attributed to their unique wing morphology and its interaction with their wingbeat kinematics. Among these distinctive morphological features, leading-edge serrations stand out – these are rigid, miniature, hook-like patterns located at the leading edge of the primary feathers of their wings. It had been hypothesized that these leading-edge serrations serve as a passive flow control mechanism, influencing the aerodynamic performance and potentially affecting the boundary layer development over the wing, subsequently influencing wake flow dynamics. Despite being the subject of research spanning multiple decades, a consensus regarding the aerodynamic mechanisms underpinning owls’ …

Go to article

Using Computational Fluid Dynamics And Optical Sensor Technology To Scale Cell Culture Platforms, Mandar Makwana Jan 2023

Using Computational Fluid Dynamics And Optical Sensor Technology To Scale Cell Culture Platforms, Mandar Makwana

KGI Theses and Dissertations

Different cell culture vessels ranging from micro scale to laboratory scale to commercial scale play critical role in upstream process development for biologics manufacturing. Based on the mode of operation, cell culture vessels have different hydrodynamic environments, making it challenging to scale. Integrated approaches using computational tools supported by experimental studies can overcome these challenges. Computational Fluid Dynamics (CFD) is one such tool that can simulate hydrodynamics within the cell culture vessels and can provide insights at macro and micro-scale. Accuracy of a CFD model significantly depends on the fluid model and assumptions. Traditionally, simple two-equation fluid models were developed …

Go to article

Passive Chlorination: Providing Clean Drinking Water To Rural Ecuadorian Communities, C.D. Tatko, Kyle Borror Jan 2023

Passive Chlorination: Providing Clean Drinking Water To Rural Ecuadorian Communities, C.D. Tatko, Kyle Borror

Summer Research

In 2002, the World Health Organization (WHO) reported that nearly 1.7 million deaths worldwide were caused by unclean water. The risk of death is elevated for young children, for which the second cause of death worldwide is diarrheal disease, which is largely caused by microbes; these microbes, when unaddressed, can proliferate in drinking water. Health risks are further elevated in rural communities, which often lack access to the technology necessary to treat water for microbial contamination. This can be seen in Ecuador, in which only 52.8% of rural households have access to safe drinking water.

Go to article

Modeling Self-Diffusiophoretic Janus Particles In Fluid, Kausik Das Jan 2023

Modeling Self-Diffusiophoretic Janus Particles In Fluid, Kausik Das

HMC Senior Theses

We explore spherical Janus particles in which a chemical reaction occurs on one face, depleting a substrate in the suspending fluid, while no reaction occurs on the other face. The steady state concentration field is governed by Laplace’s equation with mixed boundary conditions. We use the collocation method to obtain numerical solutions to the equation in spherical coordinates. The asymmetry of the reaction gives rise to a slip velocity that causes the particle to move spontaneously in the fluid through a process known as self-diffusiophoresis. Using the Lorentz reciprocal theorem, we obtain the swimming velocity of the particle. We extend …

Go to article

Long-Range And Chaotic Active Mixing Of Swimming Microbes In A Vortex Chain Flow, Nghia Le Jan 2023

Long-Range And Chaotic Active Mixing Of Swimming Microbes In A Vortex Chain Flow, Nghia Le

Honors Theses

We present experiments studying the motion and active mixing of swimming mi- crobes in laminar, vortex-dominated fluid flows. We are testing a theory that predicts the existence of swimming invariant manifolds (SwIMs) - invisible, one-way barriers blocking the paths of self-propelled tracers in the flow in one direction. We also pro- pose that the SwIMs together can form chute structures in three-dimensional phase space that facilitate cross-vortex transport of the microbes. We also observe evidence of how these structures promote long-range transport at different non-dimensional velocities (microbe’s velocity relative to flow velocity). Long-range transport is quan- tified by measuring the …

Go to article

Hamiltonian Structure Of 2d Fluid Dynamics With Broken Parity, Gustavo Machado Monteiro, Alexander G. Abanov, Sriram Ganeshan Jan 2023

Hamiltonian Structure Of 2d Fluid Dynamics With Broken Parity, Gustavo Machado Monteiro, Alexander G. Abanov, Sriram Ganeshan

Publications and Research

Isotropic fluids in two spatial dimensions can break parity symmetry and sustain transverse stresses which do not lead to dissipation. Corresponding transport coefficients include odd viscosity, odd torque, and odd pressure. We consider an isotropic Galilean invariant fluid dynamics in the adiabatic regime with momentum and particle density conservation. We find conditions on transport coefficients that correspond to dissipationless and separately to Hamiltonian fluid dynamics. The restriction on the transport coefficients will help identify what kind of hydrodynamics can be obtained by coarse-graining a microscopic Hamiltonian system. Interestingly, not all parity-breaking transport coefficients lead to energy conservation and, generally, the …

Go to article

Fabrication And Investigation Of Microfluidic Devices That Produce Non-Linear Chemical Gradients, Elijah L. Waters Jan 2023

Fabrication And Investigation Of Microfluidic Devices That Produce Non-Linear Chemical Gradients, Elijah L. Waters

College of Graduate Studies: Theses & Dissertations

Investigation of cell chemotaxis requires controlled chemical gradients. We investigated microfluidic devices that could enhance small populations' cell assays because of their ability to generate various chemical gradients. Our five designs generate different chemical concentration landscapes that we can easily convert into tools to study cell response to growth factors. Gradient landscapes occurred by splitting and mixing two input fluid concentrations using bifurcations, trifurcations, and Y-mixing junctions in three consecutive steps. Such fluid flow manipulations resulted in nine concentration streams entering a 0.54-mm-wide gradient chamber. The first design used a 1:1 ratio Y-mixer (unbiased) when blending two concentrations, resulting in …

Go to article

Patch-Wise Training With Convolutional Neural Networks To Synthetically Upscale Cfd Simulations, John P. Romano, Alec C. Brodeur, Oktay Baysal Jan 2023

Patch-Wise Training With Convolutional Neural Networks To Synthetically Upscale Cfd Simulations, John P. Romano, Alec C. Brodeur, Oktay Baysal

Mechanical & Aerospace Engineering Faculty Publications

This paper expands the authors’ prior work[1], which focuses on developing a convolutional neural network (CNN) model capable of mapping time-averaged, unsteady Reynold’s-averaged Navier-Stokes (URANS) simulations to higher resolution results informed by time-averaged detached eddy simulations (DES). The authors present improvements over the prior CNN autoencoder model that result from hyperparameter optimization, increased data set augmentation through the adoption of a patch-wise training approach, and the predictions of primitive variables rather than vorticity magnitude. The training of the CNN model developed in this study uses the same URANS and DES simulations of a transonic flow around several NACA 4-digit airfoils …

Go to article

Stratospheric Glider Measurements Of Atmospheric Parameters, Anisa Haghighi Jan 2023

Stratospheric Glider Measurements Of Atmospheric Parameters, Anisa Haghighi

Theses and Dissertations--Mechanical and Aerospace Engineering

In June 2021 a series of high altitude flights were conducted in Spaceport America, NM, using a balloon launched Uncrewed Aircraft System (UAS) to assess its capability to conduct measurements of various atmospheric properties and study turbulence in the troposphere and lower stratosphere. This UAS descends using an automated flight trajectory. The instruments aboard included a NASA-developed infrasonic microphone to evaluate its remote turbulence detection capabilities and a five-hole probe capable of measuring the in situ wind vector. Also on board were temperature, humidity and wind profile sensors. This document focuses on the atmospheric properties measured at high altitudes, the …

Go to article

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri Jan 2023

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Go to article

The Lagrangian Formulation For Wave Motion With A Shear Current And Surface Tension, Conor Curtin, Rossen Ivanov Jan 2023

The Lagrangian Formulation For Wave Motion With A Shear Current And Surface Tension, Conor Curtin, Rossen Ivanov

Articles

The Lagrangian formulation for the irrotational wave motion is straightforward and follows from a Lagrangian functional which is the difference between the kinetic and the potential energy of the system. In the case of fluid with constant vorticity, which arises for example when a shear current is present, the separation of the energy into kinetic and potential is not at all obvious and neither is the Lagrangian formulation of the problem. Nevertheless, we use the known Hamiltonian formulation of the problem in this case to obtain the Lagrangian density function, and utilising the Euler-Lagrange equations we proceed to derive some …

Go to article

Finite Element Modeling And Analysis Of Breech Face Impressions, James A. Hamilton Jan 2023

Finite Element Modeling And Analysis Of Breech Face Impressions, James A. Hamilton

Graduate Theses, Dissertations, and Problem Reports (ETD)

Finite element analysis (FEA) is a technique which has not been widely used in Forensic Science in general and firearms examination in particular. The general utility of FEA was assessed by the simulation of scenarios commonly encountered during the investigation of firearm related crimes. As a test, simulations included the perforation of a windshield and sheet metal with a 9 mm projectile, the development of pseudo subclass characteristics during the manufacturing of a breech face, and the impact of a projectile with another projectile in air and with a solid body. Results from the simulations were compared to projectiles and …

Go to article

The Computational Model Of Nanofluid Considering Heat Transfer And Entropy Generation Across A Curved And Fat Surface, Sayer Obaid Alharbi, Florentin Smarandache, Awatif M.A. Elsiddieg, Aisha M. Alqahtani, M. Riaz Khan, V. Puneeth, Nidhal Becheikh Jan 2023

The Computational Model Of Nanofluid Considering Heat Transfer And Entropy Generation Across A Curved And Fat Surface, Sayer Obaid Alharbi, Florentin Smarandache, Awatif M.A. Elsiddieg, Aisha M. Alqahtani, M. Riaz Khan, V. Puneeth, Nidhal Becheikh

Branch Mathematics and Statistics Faculty and Staff Publications

The entropy generation analysis for the nanofluid flowing over a stretching/shrinking curved region is performed in the existence of the cross-diffusion effect. The surface is also subjected to second-order velocity slip under the effect of mixed convection. The Joule heating that contributes significantly to the heat transfer properties of nanofluid is incorporated along with the heat source/sink. Furthermore, the flow is assumed to be governed by an exterior magnetic field that aids in gaining control over the flow speed. With these frameworks, the mathematical model that describes the flow with such characteristics and assumptions is framed using partial differential equations …

Go to article

The Fluid Margin Between Physical Causal Closure And Non-Physical Causal Closure, Extended To The Neutrosophic Causal Closure Principle, Florentin Smarandache Jan 2023

The Fluid Margin Between Physical Causal Closure And Non-Physical Causal Closure, Extended To The Neutrosophic Causal Closure Principle, Florentin Smarandache

Branch Mathematics and Statistics Faculty and Staff Publications

We plead for a fluid margin, or mixed/indeterminate buffer zone, between Physical and Non-Physical Causal Closures, and for a Neutrosophic Causal Closure Principle claiming that the chances of all physical effects are determined by their prior partially physical and partially non-physical causes.

Go to article

An Exploration Of Cloud Droplet Growth By Condensation And Collision-Coalescence In A Convection-Cloud Chamber, Jacob T. Kuntzleman Jan 2023

An Exploration Of Cloud Droplet Growth By Condensation And Collision-Coalescence In A Convection-Cloud Chamber, Jacob T. Kuntzleman

Dissertations, Master's Theses and Master's Reports

Atmospheric clouds are crucial to weather and climate, and the rate at which droplets collide and coalesce to form precipitation is one of the fundamental controlling processes. The convection-cloud chamber allows the interactions between aerosols and cloud droplets produced by condensation to be investigated within a turbulent environment. Studying the full range of microphysical conditions in atmospheric clouds is not possible, however, unless conditions for droplet growth by collision and coalescence are also achieved. In this study, we explore the conditions favorable to collision-coalescence growth in convection-cloud chambers, extending previous work on steady-state droplet size distributions due to condensation alone. …

Go to article

On The Gaussian-Core Vortex Lattice Model For The Analysis Of Wind Farm Flow Dynamics, Apurva Baruah Jan 2023

On The Gaussian-Core Vortex Lattice Model For The Analysis Of Wind Farm Flow Dynamics, Apurva Baruah

Dissertations, Master's Theses and Master's Reports

Wind power science has seen tremendous development and growth over the last 40 years. Advancements in design, manufacturing, installation, and operation of wind turbines have enabled the commercial deployment of wind power generation systems. These have been due, in a large part, to the expertise in the simulation and modeling of individual wind turbines. The new generation of wind energy systems calls for a need to accurately predict and model the entire wind farm, and not just individual turbines. The commercial deployment of these wind farms depends on model's ability to accurately capture the different physics involved, each at its …

Go to article

Piv Measurements Of Open-Channel Turbulent Flow Under Unconstrained Conditions, James K. Arthur Jan 2023

Piv Measurements Of Open-Channel Turbulent Flow Under Unconstrained Conditions, James K. Arthur

Faculty Journal Articles

Many open-channel turbulent flow studies have been focused on highly constrained conditions. Thus, it is rather conventional to note such flows as being fully developed, fully turbulent, and unaffected by sidewalls and free surface disturbances. However, many real-life flow phenomena in natural water bodies and artificially installed drain channels are not as ideal. This work is aimed at studying some of these unconstrained conditions. This is achieved by using particle image velocimetry measurements of a developing turbulent open-channel flow over a smooth wall. The tested flow effects are low values of the Reynolds number based on the momentum thickness Re …

Go to article

Innovations In Drop Shape Analysis Using Deep Learning And Solving The Young-Laplace Equation For An Axisymmetric Pendant Drop, Andres P. Hyer Jan 2023

Innovations In Drop Shape Analysis Using Deep Learning And Solving The Young-Laplace Equation For An Axisymmetric Pendant Drop, Andres P. Hyer

Theses and Dissertations

Axisymmetric Drop Shape Analysis (ADSA) is a technique commonly used to determine surface or interfacial tension. Applications of traditional ASDA methods to process analytical technologies are limited by computational speed and image quality. Here, we address these limitations using a novel machine learning approach to analysis. With a convolutional neural network (CNN), we were able to achieve an experimental fit precision of (+/-) 0.122 mN/m in predicting the surface tension of drop images at a rate of 1.5 ms^-1 versus 7.7 s^-1, which is more than 5,000 times faster than the traditional method. The results are validated on real images …

Go to article

Thermal Analysis Of Thermal Shield For Pip-Ii Ssr1 Cryomodule, Victor Aguado Rodriguez Jan 2023

Thermal Analysis Of Thermal Shield For Pip-Ii Ssr1 Cryomodule, Victor Aguado Rodriguez

Graduate Research Theses & Dissertations

Fermilab's PIP-II project plans to enhance the onsite accelerator into the world's most intense neutrino beam, bringing Fermilab into the next generation of particle accelerators. The five different types of cryomodules are vital parts of the PIP-II project and each requires numerous engineering analyses to prove operation. For example, the thermal shield of the Single Spoke Resonator-1 (SSR1) cryomodule required a thermal analysis to ensure the design was operating as intended before fabrication commenced. The thermal shield is cooled by the supercritical helium inside of the extrusion and must remain between 45 and 80 Kelvin. The main purpose of the …

Go to article

Long-Range Aceo Phenomena In Microfluidic Channel, Diganta Dutta, Keifer Smith, Xavier Palmer Jan 2023

Long-Range Aceo Phenomena In Microfluidic Channel, Diganta Dutta, Keifer Smith, Xavier Palmer

Electrical & Computer Engineering Faculty Publications

Microfluidic devices are increasingly utilized in numerous industries, including that of medicine, for their abilities to pump and mix fluid at a microscale. Within these devices, microchannels paired with microelectrodes enable the mixing and transportation of ionized fluid. The ionization process charges the microchannel and manipulates the fluid with an electric field. Although complex in operation at the microscale, microchannels within microfluidic devices are easy to produce and economical. This paper uses simulations to convey helpful insights into the analysis of electrokinetic microfluidic device phenomena. The simulations in this paper use the Navier–Stokes and Poisson Nernst–Planck equations solved using COMSOL …

Go to article

Design Of An Internal Osculating Waverider Intake, Mark E. Noftz, Andrew J. Shuck, Joseph S. Jewell, Jonathan Poggie, Andrew N. Bustard, Thomas J. Juliano, Nicholas J. Bisek Jan 2023

Design Of An Internal Osculating Waverider Intake, Mark E. Noftz, Andrew J. Shuck, Joseph S. Jewell, Jonathan Poggie, Andrew N. Bustard, Thomas J. Juliano, Nicholas J. Bisek

Publications

The design of an inward-turning, high-speed, three-dimensional streamline traced intake is presented from osculating axisymmetric theory. To satisfy the osculating intake design criteria, a stitched Busemann diffuser and Internal Conical Flow-A solution is used as the basic isentropic compressive streamline. This new contour provides efficient compression, high flow uniformity, and straight leading edge shocks of equal strength. Additionally, a novel method for constructing the inlet cowl is presented. The combined process leads to a new method of high-speed intake design. A generic shape-transitioned intake is constructed and named the Indiana Inlet for the Indiana universities that contributed to the project. …

Go to article

First Prev