Fluid Dynamics Commons^™

Interactive Water Vortex Exhibit, Simon Way, Emily Laing, Roqaya Naseri, Makenzie Kan

Mechanical Engineering

The San Luis Obispo Children’s Museum requested an interactive water vortex exhibit to both engage and entertain inquisitive guests, ages two to eight. The goal was to design and manufacture an exhibit that would educate its users on the fluid mechanics behind water vortices. They activate the mechanics by spinning a wheel, which is perceived as the catalyst to manipulate the flow of water to successfully create a whirlpool. Our team has created an interactive display that will enlighten young minds, providing the museum with an educational exhibit which shares a concept not currently taught by any other. Our project …

Optimization Of Flagellar Locomotion In The Low Reynolds Number Regime, Aidan M. Trodden, Aidan M. Trodden

Physics

This report investigates the computational and theoretical techniques - modeled by E. Lauga and C. Eloy - used to optimize the shape of an activated flagellum for enhanced cell motility. Cell motility is ubiquitous and has a large affect on biological systems such as marine life ecosystems, reproduction, and infection. The physical principles governing flagellar propulsion are explored using computational fluid dynamics simulations, mathematical modeling, and the sequential quadratic programming (SQP) optimization algorithm. Through iterative refinement, we can identify optimized flagellar shapes that would minimize the energetic cost dependent on a single dimensionless sperm numbers (Sp). The computation of the …

Diffusion-Driven Aggregation Of Particles In Quasi-2d Membranes, Oscar Gullickson Rausis

Physics

Many biological membranes can be modeled as two-dimensional (2D) viscous fluid sheets surrounded by three-dimensional (3D) fluids of different viscosity. Such membranes are dubbed quasi-2D as they exhibit properties of both 2D and 3D fluids. The Saffman length is a parameter that describes the energy exchange between the membrane and bulk fluids and controls the cross-over from 2D to 3D hydrodynamics. We aim to model diffusion-driven aggregation of particles embedded in a quasi-2D membrane. It is known that hydrodynamic interactions between solute particles significantly reduce their aggregation rate in 3D fluids. It is expected that in quasi-2D membranes the reduction …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Soarnet, Deep Learning Thermal Detection For Free Flight, Jake T. Tallman

Master's Theses

Thermals are regions of rising hot air formed on the ground through the warming of the surface by the sun. Thermals are commonly used by birds and glider pilots to extend flight duration, increase cross-country distance, and conserve energy. This kind of powerless flight using natural sources of lift is called soaring. Once a thermal is encountered, the pilot flies in circles to keep within the thermal, so gaining altitude before flying off to the next thermal and towards the destination. A single thermal can net a pilot thousands of feet of elevation gain, however estimating thermal locations is not …

A Study Of The Design Of Adaptive Camber Winglets, Justin J. Rosescu

Master's Theses

A numerical study was conducted to determine the effect of changing the camber of a winglet on the efficiency of a wing in two distinct flight conditions. Camber was altered via a simple plain flap deflection in the winglet, which produced a constant camber change over the winglet span. Hinge points were located at 20%, 50% and 80% of the chord and the trailing edge was deflected between -5° and +5°. Analysis was performed using a combination of three-dimensional vortex lattice method and two-dimensional panel method to obtain aerodynamic forces for the entire wing, based on different winglet camber configurations. …

Memory In A Contact Line, Charity Lizardo, Esmeralda Orozco, Audrey Profeta, Nathan C. Keim

STAR Program Research Presentations

We study the behavior of the liquid-solid-vapor contact line of water held in a narrow gap between two plates. A syringe pump injects and withdraws a constant, small volume of the water, driving the contact line back and forth repeatedly and changing its shape. We take photos of the contact line after each cycle. Comparing subsequent images to each other, we find that after several cycles the contact line reaches one of two steady states: a reversible steady state, where the shape is not changing, or a fluctuating steady state, where the shape continues to change slightly. Experiments on acrylic …

Reversible Motion In A Contact Line, Audrey Profeta, Esmeralda Orozco, Juan A. Ortiz Salazar, Dani Medina, Nathan C. Keim

STAR Program Research Presentations

When a body of liquid sits on a surface, an irregular border between the wet and dry regions of the surface exists, called the contact line. Driving this contact line back and forth repeatedly can change its shape.We use a syringe pump to cyclically infuse and withdraw a predetermined volume of water, and take photos of the contact line after each cycle. Comparing these images to each other determines if the contact line is returning to the same shape. We find that below a critical value of infused volume, after many cycles the contact line reaches a steady state in …

A High Quality, Eulerian 3d Fluid Solver In C++, Lejon Anthony Mcgowan

Computer Science and Software Engineering

Fluids are a part of everyday life, yet are one of the hardest elements to properly render in computer graphics. Water is the most obvious entity when thinking of what a fluid simulation can achieve (and it is indeed the focus of this project), but many other aspects of nature, like fog, clouds, and particle effects. Real-time graphics like video games employ many heuristics to approximate these effects, but large-scale renderers aim to simulate these effects as closely as possible.

In this project, I wish to achieve effects of the latter nature. Using the Eulerian technique of discrete grids, I …

Faraday-Talbot Effect From A Circular Array Of Pillars, Jessica J. Pilgram

Physics

When an oil bath is vertically oscillating with an acceleration above some critical value, known as the Faraday threshold, the bath surface becomes unstable and nonlinear standing wave patterns emerge. One phenomenon that has been observed above the Faraday threshold is the formation of Faraday-Talbot carpets, resulting from near-field diffraction. The optical Talbot effect occurs when a monochromatic wave passes through a diffraction grating. In the near-field, the formation of self- images is observed at integer multiples of what is known as the Talbot length. These two-dimensional patterns have various applications including X-ray imaging and atom and particle trapping. Two- …

Drag Reduction Using Graphene In Viscous Laminar Flow With Water And Isopropanol, Jessica M. Patalano, Akm Newaz Dr.

STAR Program Research Presentations

America has over 2.6 million miles of pipeline for the transportation of energy products, such as liquid petroleum and natural gas. Friction is one of the main sources for energy dissipation at liquid/solid interfaces that limits the transport of a fluid through a cylindrical pipe or tube. In order to make these pipelines more efficient and enhance the flow of these materials, it is necessary to find a coating material that reduces the frictional drag. The ideal material would reduce the drag between the fluid and solid interface while being easily synthesizable on the surface. The goal of this project …

Transition Orbits Of Walking Droplets, Joshua Parker

Physics

It was recently discovered that millimeter-sized droplets bouncing on the surface of an oscillating bath of the same fluid can couple with the surface waves it produces and begin walking across the fluid bath. These walkers have been shown to behave similarly to quantum particles; a few examples include single-particle diffraction, tunneling, and quantized orbits. Such behavior occurs because the drop and surface waves depend on each other to exist, making this the first and only known macroscopic pilot-wave system. In this paper, the quantized orbits between two identical drops are explored. By sending a perturbation to a pair of …

Particle Image Velocimetry Of Transverse Jets In Crossflow, Jesse K. Tsai, Kayla Kuzmich, David Forliti, Kriss Vanderhyde, Nils Sedano

STAR Program Research Presentations

The jet in crossflow (JICF) has been an ongoing study for the past several decades with applications in the field of fluid mechanics. This particular flow field produces vortical structures tied to the entrainment and mixing of two separate fluids. Research of the JICF seeks to determine a model and trajectory scaling law for future designs. This will help future designers to optimize the mixing and homogeneity of the two fluids to decrease emissions from pollutants, make ignition easier, and improve combustion efficiency of rockets.

Our experiment will employ Particle Image Velocimetry (PIV) to determine the fluid motion of the …

Does A Plastron Improve Heat Transfer?, Madani A. Khan, Jeffrey Alston, Andrew Guenthner

STAR Program Research Presentations

Superamphiphobic surfaces strongly repel both water and oils. In this work, aluminum coupons are processed by sanding with various grit of sand paper to impart microscale roughness. Subsequent submersion of the aluminum substrate in boiling water grows nanoscale grass-like structures. The oxide layer of Al is slightly soluble in water. During a fast diffusion/equilibrium, Al₂O₃ nanograss grows on the surface. A low energy coating is then deposited on the surface. The micro and nanoscale features create re-entrant structures that trap air enabling contact liquid to be in a Cassie-Baxter state. Superamphiphobicity of the samples were confirmed by …

Viscosity Dependence Of Faraday Wave Formation Thresholds, Lisa M. Slaughter

Symposium

This experiment uses an electromagnetic shaker to produce standing wave patterns on the surface of a vertically oscillating sample of silicon liquid. These surface waves, known as Faraday waves, form shapes such as squares, lines, and hexagons. They are known to be dependent upon the frequency and amplitude of the forcing as well as on the viscosity and depth of the liquid in the dish. At a depth of 4mm and for various silicon liquids having kinematic viscosities of 10, 20, and 38 cSt, we determined the acceleration at which patterns form for frequencies between 10 and 60 Hz. For …

Laser Doppler Velocimetry: Flow Measurement Using A Digital Micromirror Device, Dawei Kuo

Physics

In this experiment we utilize a Texas Instruments Digital Micromirror Device to impart a phase shift to the beams of a laser Doppler velocimeter. The advantages of this approach include low cost, low power consumption, a precisely known phase-stepping frequency, and the capability of working with a broad range of optical wavelengths. The velocities measured with the set up shown here are of order 1 cm/s.

Smarticles: A Method For Identifying And Correcting Instability And Error Caused By Explicit Integration Techniques In Physically Based Simulations, Susan Aileen Marano

Master's Theses

Using an explicit integration method in physically based animations has many advantages including conceptual and computational simplicity, however, it re- quires small time steps to ensure low numerical instability. Simulations with large numbers of individually interacting components such as cloth, hair, and fluid models, are limited by the sections of particles most susceptible to error. This results in the need for smaller time steps than required for the majority of the system. These sections can be diverse and dynamic, quickly changing in size and location based on forces in the system. Identifying and handling these trou- blesome sections could allow …

On The Growth Rate Of Turbulent Mixing Layers: A New Parametric Model, Jeffrey L. Freeman

Master's Theses

A new parametric model for the growth rate of turbulent mixing layers is proposed. A database of experimental and numerical mixing layer studies was extracted from the literature to support this effort. The domain of the model was limited to planar, spatial, nonreacting, free shear layers that were not affected by artificial mixing enhancement techniques. The model is split into two parts which were each tuned to optimally fit the database; equations for an incompressible growth rate were derived from the error function velocity profile, and a function for a compressibility factor was generalized from existing theory on the convective …

Viscosity Dependence Of Faraday Wave Formation Thresholds, Lisa Michelle Slaughter

Physics

This experiment uses an electromagnetic shaker to produce standing wave patterns on the surface of a vertically oscillating sample of silicon liquid. These surface waves, known as Faraday waves, form shapes such as squares, lines, and hexagons. They are known to be dependent upon the frequency and amplitude of the forcing as well as on the viscosity and depth of the liquid in the dish. At a depth of 4mm and for various silicon liquids having kinematic viscosities of 10, 20, and 38 cSt, we determined the acceleration at which patterns form for frequencies between 10 and 60 Hz. For …

Ramjet Combustion Chamber, Paul Cameron Stone

Aerospace Engineering

A ramjet combustion chamber is designed and some initial assembly fabrication and test completed as a component of a ramjet graduate project for California Polytechnic State University, San Luis Obispo Supersonic Wind Tunnel. The combustor design is driven by a theoretical model created by a Cal Poly graduate student, Harrison Sykes. Temperature, pressure, and fuel flow will be measured.

Human Powered Helicopter: Observing The Impacts Of Ground Effect And Intermeshed Rotors, Shane Stowe

Physics

No abstract provided.

Ferrofluids, James Patt

Physics

Ferrofluids are truly fascinating. Technologically savvy artists have been able to capture the human imagination with little but a judicious application of a magnetic field. The substance seems to defy gravity, flowing and shaping itself seemingly like magic (see Figure 1). The true magic, however, is the vast range of properties that this intrinsically simple substance can exhibit. It can vary its viscosity given the strength of the magnetic field. It can draw heat away from an over worked mechanical component. It can even split a beam of light in two. It’s hard to imagine what kind of strange and …

Python Modeling Of Heat Flow In A Thermal Storage Device, Tim Hider

Physics

A parabolic dish that concentrates sunlight into a thermal storage device may comprise an inexpensive, environmentally benign, clean cooking technology appropriate for developing countries. A Scheffler Solar reflector was constructed and a thermal storage device built to eventually be coupled with the Scheffler. We tested the heat flow in the thermal storage device with an electric heater, and wrote Python code that solves the heat diffusion in 1D and 2D in order to model heat flow in the thermal storage device.