Engineering Physics Commons^™

Parmela Based Simulations On Jefferson Lab Free Electron Laser Injector, Deepesh Kumar Koppunuru

Electrical & Computer Engineering Theses & Dissertations

Free Electron Lasers (FELs) have many applications and are under continuing development to meet various needs and in areas from materials processing to life sciences research. This is because of its unique capability of generating high-average power, coherent, and wavelength tunable light by employing relativistic beam of un-bounded electrons. The main challenge in FEL development is the generation of a high intensity, high-quality electron beam in an injector. Further acceleration to relativistic energies is accomplished in a linear accelerator (LINAC) for producing laser light in a device known as wiggler. The Jefferson Lab FEL team intents to increase the injector …

Low And Medium Β Superconducting Cavities And Accelerators, Jean R. Delayen

Physics Faculty Publications

No abstract provided.

A General Model Of Resistive Wall Instability In Linear Accelerators, Jean R. Delayen

Physics Faculty Publications

A general model for wakefield-generated instabilities in linear accelerators, originally developed for cumulative beam breakup [1], is applied to the resistive wall instability. The general solution for various bunch charge distributions and application to various accelerator configurations are presented.

Characterization And Quantum Efficiency Validation Of Ingaas Linear Focal Plane Array, Christopher Salenga Garcia

Electrical & Computer Engineering Theses & Dissertations

A 1x1024 InGaAs linear hybrid focal plane array (FPA) with CMOS readout was characterized at room temperature to analyze its electrical and optical properties and to measure its performance parameters.

The most important parameter of an FPA is the gain constant K, which allows conversion of the FPA output measurement unit from digital counts into the number of generated signal electrons. For FPAs with CMOS readout, the commonly used meanvariance method for determining K often underestimates its value. A more reliable method for finding K is the photon transfer technique, which is developed for FPAs with CCD readout. This …

Monodomain Dynamics For Rigid Rod And Platelet Suspensions In Strongly Coupled Coplanar Linear Flow And Magnetic Fields. Ii. Kinetic Theory, M. Gregory Forest, Sarthok Sircar, Qi Wang, Ruhai Zhou

Mathematics & Statistics Faculty Publications

We establish reciprocity relations of the Doi-Hess kinetic theory for rigid rod macromolecular suspensions governed by the strong coupling among an excluded volume potential, linear flow, and a magnetic field. The relation provides a reduction of the flow and field driven Smoluchowski equation: from five parameters for coplanar linear flows and magnetic field, to two field parameters. The reduced model distinguishes flows with a rotational component, which map to simple shear (with rate parameter) subject to a transverse magnetic field (with strength parameter), and irrotational flows, for which the reduced model consists of a triaxial extensional flow (with two extensional …

Plasma Treatment Of Bulk Niobium Surfaces For Srf Cavities, M. Rašković, L. Vuškovic, S. Popović, L. Phillips, A. -M. Valente-Feliciano, S. B. Radovanov, L. Godet

Physics Faculty Publications

Two types of electric discharges were used to demonstrate the validity of plasma surface treatment for superconducting radio-frequency (SRF) cavities. The experiments were performed on disc-shaped Nb samples and compared with identical samples treated with buffer chemical polishing (BCP) techniques. Surface analysis indicates comparable or superior properties of plasma-treated samples. These promising results are still preliminary and additional work is in progress.

Dynamics Of An Atmospheric Pressure Plasma Plume Generated By Submicrosecond Voltage Pulses, Xinpei Lu, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

Nonequilibrium plasmas driven by submicrosecond high voltage pulses have been proven to produce high-energy electrons, which in turn lead to enhanced ionization and excitations. Here, we describe a device capable of launching a cold plasma plume in the surrounding air. This device, "the plasma pencil," is driven by few hundred nanosecond wide pulses at repetition rates of a few kilohertz. Correlation between current-voltage characteristics and fast photography shows that the plasma plume is in fact a small bulletlike volume of plasma traveling at unusually high velocities. A model based on photoionization is used to explain the propagation kinetics of the …

Ozone Concentration In An Atmospheric Pressure Air Plasma Jet, Srinivas Reddy Suddala

Electrical & Computer Engineering Theses & Dissertations

A stable micro-plasma jet in air was generated from a direct current discharge between two molybdenum electrodes (0.25 mm thick) that were separated by an alumina insulator of the same thickness. The after-glow plasma jet was generated by blowing air through the space between the electrodes. A change from laminar to turbulent flow was observed at a gas flow rate of 140 ml/min. The length of the plasma jet increased with flow rate in the laminar mode to approximately 15 mm and decreased in the turbulent mode.

Increasing the gas flow rate up to 200 ml/min at a constant discharge …

Fourier Transform Analysis Of Terahertz Radiation, Chikaodira N. Okpo

Electrical & Computer Engineering Theses & Dissertations

Advances in terahertz radiation (T-rays) technology have great promise in various technological areas ranging from medical technology, imaging technology and accelerator technology. At Thomas Jefferson Laboratory, the Free Electron Laser division (FEL) produces very powerful beam of laser light by accelerating electrons in bunches along a beamline. This laser light absorbs and releases energy at various wavelengths. The new FEL upgrade led to the production of very bright terahertz (THz) radiation with an average power of 1 00watts which is about 100,000 times brighter than those produced elsewhere. These T-rays have very significant applications in the Laboratory. The most significant …

Design And Fabrication Of A Prototype Fabry-Perot Cavity For The Compton Polarimeter Upgrade At Jefferson Lab, Deepa Deepa

Mechanical & Aerospace Engineering Theses & Dissertations

Upcoming experiments at Hall A at Jefferson lab require 1 % absolute accuracy of the electron beam polarization measurement at 0.85 Ge V energy. The Compton polarimeter at Hall A is capable of measuring beam polarization with 3 - 4 % accuracies at this beam energy. Hence it was proposed to upgrade the present Compton by doubling the laser frequency [2]. The present Compton polarimeter operates with a 1064 nm, continuous wave laser at 200 mW. This power is enhanced to 1.5 kW using a 0.85 m long Fabry-Perot Cavity. Changing to 532 nm laser with the same power would …

Kinetic Structure Simulations Of Nematic Polymers In Plane Couette Cells. Ii: In-Plane Structure Transitions, M. Gregory Forest, Ruhai Zhou, Qi Wang

Mathematics & Statistics Faculty Publications

Nematic, or liquid crystalline, polymer (LCP) composites are composed of large aspect ratio rod-like or platelet macromolecules. This class of nanocomposites exhibits tremendous potential for high performance material applications, ranging across mechanical, electrical, piezoelectric, thermal, and barrier properties. Fibers made from nematic polymers have set synthetic materials performance standards for decades. The current target is to engineer multifunctional films and molded parts, for which processing flows are shear-dominated. Nematic polymer films inherit anisotropy from collective orientational distributions of the molecular constituents and develop heterogeneity on length scales that are, as yet, not well understood and thereby uncontrollable. Rigid LCPs in …

Optimization Of Ultraviolet Emission And Chemical Species Generation From A Pulsed Dielectric Barrier Discharge At Atmospheric Pressure, Xinpei Lu, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

One of the attractive features of nonthermal atmospheric pressure plasmas is the ability to achieve enhanced gas phase chemistry without the need for elevated gas temperatures. This attractive characteristic recently led to their extensive use in applications that require low temperatures, such as material processing and biomedical applications. The agents responsible for the efficient plasma reactivity are the ultraviolet (UV) photons and the chemically reactive species. In this paper, in order to optimize the UV radiation and reactive species generation efficiency, the plasma was generated by a dielectric barrier discharge driven by unipolar submicrosecond square pulses. To keep the discharge …

Vector Operations In Superscalar Architectures, Nathan Daniel Flinn

Electrical & Computer Engineering Theses & Dissertations

Vector calculations are very prevalent today. Though the vector-processing computer is quite an old concept, superscalar processors lack hardware support for vector operations. This thesis investigates whether an ordinary superscalar computer architecture can be designed to include hardware support for improved vector operations without drastically changing the existing superscalar design and behavior. A computer architecture design was created and implemented that included the vector multiply (dot product) operation. The design includes a Vector Operations Unit that captures incoming vector operations and generates the necessary set of machine instructions to complete the vector operation internally. It then delivers these instructions to …

Modeling And Simulation Of Photonic Crystal Fibers Using Finite Difference Frequency Domain Method, Md. Khalid Ikram

Electrical & Computer Engineering Theses & Dissertations

Photonic crystal fibers (PCFs) allow guiding light in low-index core. These fibers exhibit properties such as single-mode operation in broad wavelength region. The mode shape and group velocity dispersion can be controlled by designing the microstructures of the cladding. In order to study these properties, a fast, efficient, and highly accurate numerical modeling method is required.

A full-vectorial finite-difference frequency-domain (FDFD) method is implemented. The modal properties of conventional step index fiber and index-guiding PCF are analyzed using this modeling technique. Compared to plane wave expansion and biorthogonal basis methods, FDFD is found to be simple, reliable, and efficient. PCFs …

Microscopic Analysis For Water Stressed By High Electric Fields In The Prebreakdown Regime, R. P. Joshi, J. Qian, K. H. Schoenbach, E. Schamiloglu

Bioelectrics Publications

Analysis of the electrical double layer at the electrode-water interface for voltages close to the breakdown point has been carried out based on a static, Monte Carlo approach. It is shown that strong dipole realignment, ion-ion correlation, and finite-size effects can greatly modify the electric fields and local permittivity (hence, leading to optical structure) at the electrode interface. Dramatic enhancements of Schottky injection, providing a source for electronic controlled breakdown, are possible. It is also shown that large pressures associated with the Maxwell stress tensor would be created at the electrode boundaries. Our results depend on the ionic density, and …

Analysis Of Ingaassb/Aigaassb Photodetectors For Applications At The 2.0 Micron Wavelengths, Phani Pendyala

Electrical & Computer Engineering Theses & Dissertations

The study of an InGaAsSb-based heterojunction avalanche photo detector has been carried out for 2-μm applications. A separate absorption and multiplication structure was used because it minimizes the tunneling component of the dark current in the absorption region, and also provides single-carrier injection into the multiplication region. This is a well-known requirement for reducing the multiplication noise. The primary goal was to evaluate the potential of InGaAsSb-AlGaAsSb photo-detectors for photodetection at the two-micron wavelength.

InGaAsSb is a relatively new material, and, therefore, characterization and photodetector response analysis based on this material are not available in the literature. In this thesis …

Study Of A Growth Instability Of Γ-In[Sub 2]Se[Sub 3], C. Amory, J. C. Bernede, S. Marsillac

Electrical & Computer Engineering Faculty Publications

γ-In[sub 2]Se[sub 3] thin film are deposited for various substrate temperatures in the range of 523–673 K. This study shows that at 573 and 673 K the thin films are well crystallized with grains aligned along the c axis. Between these temperatures, a domain of instability appears where the γ-In[sub 2]Se[sub 3] thin films have a randomly orientation and the c-lattice parameter increases. The presence of the metastable phase κ-In[sub 2]Se[sub 3], during the growth, can explain the existence of this domain of instability. The insertion of Zn during the preparation process allows us to stabilize the phase κ at …

Reflection-High Energy Electron Diffraction Study Of Si(100) Homoepitaxy By Femtosecond Pulsed Laser Deposition, Mohammed S. Hegazy

Electrical & Computer Engineering Theses & Dissertations

The dynamics of femtosecond pulsed laser deposition (fsPLD) of Si(!00)-1 x I and Si(!00)-2x I homoepitaxy are studied by in situ reflection high-energy electron diffraction (RHEED) and ex situ atomic force microscopy (AFM). The effects of substrate temperature, laser fluence and the pressure of a passive gas on the Si(!00)-1 x I growth mode are discussed. It is shown that films grow following the Volmer-Weber (3D) growth mode. The substrate temperature largely affects the morphology of the grown film. Below ~ 400 °C (at laser fluence of~ 1.9 J/cm²), randomly oriented 3D clusters are grown. This is shown …

Cuin1-Xalxse2 Thin Films And Solar Cells, P. D. Paulson, M. W. Haimbodi, S. Marsillac, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

CuIn[sub 1-x]Al[sub x]Se[sub 2] thin films are investigated for their application as the absorber layer material for high efficiency solar cells. Single-phase CuIn[sub 1-x]Al[sub x]Se[sub 2] films were deposited by four source elemental evaporation with a composition range of 0≤x≤0.6. All these films demonstrate a normalized subband gap transmission >85% with 2 µm film thickness. Band gaps obtained from spectroscopic ellipsometry show an increase with the Al content in the CuIn[sub 1-x]Al[sub x]Se[sub 2] film with a bowing parameter of 0.62. The structural properties investigated using x-ray diffraction measurements show a decrease in lattice spacing as the Al content increases. …

Improvements In Wavelength Modulation Spectroscopy Using Ratios Of Higher Harmonics, James Michael Barrington

Electrical & Computer Engineering Theses & Dissertations

Experiments in Wavelength Modulation Spectroscopy have been conducted at Old Dominion University since 1996. The method provides a highly sensitive, nonintrusive method of probing gases. Research has concentrated on effectively modeling the higher harmonic shapes that are measured experimentally. Accurately modeling these signals will result in the ability to reliably extract the information contained in transition line shapes.

In order to accurately depict the signals, the theory must be thoroughly understood. This thesis develops the theory of Wavelength Modulation Spectroscopy from two aspects: a direct Fourier series expansion of a time varying intensity profile and through communication theory. In addition, …

High-Efficiency Solar Cells Based On Cu(Inal)Se[Sub 2] Thin Films, S. Marsillac, P. D. Paulson, M. W. Haimbodi, R. W. Birkmire, W. N. Shafarman

Electrical & Computer Engineering Faculty Publications

A Cu(InAl)Se₂solar cell with 16.9% efficiency is demonstrated using a Cu(InAl)Se₂thin film deposited by four-source elemental evaporation and a device structure of glass/Mo/Cu(InAl)Se₂/CdS/ZnO/indium tin oxide/(Ni/Algrid)/MgF₂. A key to high efficiency is improved adhesion between the Cu(InAl)Se₂ and the Mo back contact layer, provided by a 5-nm-thick Ga interlayer, which enabled the Cu(InAl)Se₂ to be deposited at a 530 °C substrate temperature. Film and device properties are compared to Cu(InGa)Se₂ with the same band gap of 1.16 eV. The solar cells have similar behavior, with performance limited by recombination through …

Advances In Space Radiation Shielding Codes, John W. Wilson, Ram K. Tripathi, Garry D. Qualls, Francis A. Cucinotta, Richard E. Prael, John W. Norbury, John H. Heinbockel, John Tweed, Giovanni De Angelis

Mathematics & Statistics Faculty Publications

Early space radiation shield code development relied on Monte Carlo methods and made important contributions to the space program. Monte Carlo methods have resorted to restricted one-dimensional problems leading to imperfect representation of appropriate boundary conditions. Even so, intensive computational requirements resulted and shield evaluation was made near the end of the design process. Resolving shielding issues usually had a negative impact on the design. Improved spacecraft shield design requires early entry of radiation constraints into the design process to maximize performance and minimize costs. As a result, we have been investigating high-speed computational procedures to allow shield analysis from …

Pulsed Electron Heating Of Atmospheric Pressure Air Glow Discharges, Hisham Merhi

Electrical & Computer Engineering Theses & Dissertations

By applying electric field pulses of short duration (compared to the time constant for glow-to-arc transitions) to a weakly ionized gas, the electron energy distribution can be temporarily shifted to higher energies. This effect causes a nonlinear increase in the ionization rate and consequently a larger electron decay time. This effect has been demonstrated using single pulse operation.³ In order to generate plasma with semi-continuous electron density, repetitive operation is required. As a first step towards repetitive pulsed electric field operation, the temporal development of the voltage across the plasma for two subsequent pulses was measured. The dual pulse …

Mitigation Of Water Vapor Interference For Infrared Polarization-Modulated Gas Filter Correlation Radiometry, David K. Lockwood

Electrical & Computer Engineering Theses & Dissertations

Gas filter correlation radiometry (GFCR) is a high-resolution, high-specificity technique for sensing gaseous species. A variation of absorption spectroscopy, GFCR has a long-proven record on orbital platforms for quantitative measurements of atmospheric constituents, as well as common usage in ground-based sensing applications. PMGFCR (Polarization-modulated GFCR) is a recent refinement of the technique with several advantages over the traditional method, including reducing the number of photodetectors required, increased sensitivity, and elimination of moving parts.

To date, no infrared remote sensors have successfully measured nitric oxide (NO) in vehicle exhaust due to spectral overlap by strong water vapor (H₂O_{v …}

Wavelength Modulation Spectroscopy Of Water Vapor And Line Center Stabilization At 1.462 Μm For Lidar Applications, Colleen Marie Fitzgerald

Electrical & Computer Engineering Theses & Dissertations

Wavelength modulation spectroscopy was employed to investigate water vapor absorption lines in the 1.462 µm wavelength region using an external-cavity diode laser. These measurements were necessary in the development of a lidar (light detection and ranging) instrument for differential absorption measurement of the concentration and movement of water vapor in the Earth's atmosphere. Differential absorption measurements require that the laser frequency remain stable throughout the duration of the measurement. To ensure this stability, the laser output wavelength is monitored and a feedback control loop set up to minimize laser line drift. Three lines were investigated in the 1.462 µm region. …

Textured Mos 2 Thin Films Obtained On Tungsten: Electrical Properties Of The W/Mos 2 Contact, E. Gourmelon, J. C. Bernède, J. Pouzet, S. Marsillac

Electrical & Computer Engineering Faculty Publications

Textured films of molybdenum disulfide have been obtained by solid state reaction between the constituents in thin films form when a (200) oriented tungsten sheet is used as substrate. The crystallites have their c axis perpendicular to the plane of the substrate. The annealing conditions are T=1073K and t=30 min. The films are stoichoimetric and p type. Such highly textured films are achieved without foreign atom addition (Ni, Co...). It appears, as shown by x-ray photoelectron spectroscopy, that a thin WS₂ layer is present at the interface W/MoS₂. The crystallization process is discussed by a …

Fiber-Optic Coupled Lidar Receiver System To Measure Stratospheric Ozone, David Brent Harper

Electrical & Computer Engineering Theses & Dissertations

A fiber-optic coupled lidar receiver system was constructed to determine ozone concentrations in the stratosphere. The system was used to make ground-based measurements of lidar returns from a UV DIAL system. A fiber-optic cable was used to couple the light from the receiver telescope to the light detector. Photon counting was implemented as the light detection technique. This technique allowed detection of 301 and 311 nm lidar returns up to 27.5 and 32.5 km respectively. A software application was developed to control the photon counting system and perform real-time data analysis of measured lidar returns. DIAL measurements of stratospheric ozone …

Development And Testing Of An Ac Micro Hollow Cathode Simulator, Thomas E. Caldwell

Electrical & Computer Engineering Theses & Dissertations

The use of AC source plasma discharge devices in applications such as material processing and film deposition has increased in recent years due to improvements in discharge efficiency made possible by devices such as the micro hollow cathode. Designing hollow cathodes for specific applications requires an understanding of the processes that govern the discharge. Simulation is an inexpensive tool for understanding hollow cathode operation and optimizing the device for specific applications. This thesis describes the development of an AC micro hollow cathode simulator. It details the theoretical models used in the simulation and presents the results of test cases intended …

Surface Resistance Measurements Of Superconducting Niobium Samples With A Triaxial Cavity, Paul Martin Boccard

Physics Theses & Dissertations

This experimental study has revealed and investigated many of the physical issues that affect accurate measurement of the surface resistance for small samples consisting of superconducting niobium films on copper substrates. It is believed that this work provides the groundwork for future research directed towards solving this important problem. Accurate measurement of surface resistance for such samples is needed to allow the rapid evaluation and optimization of the deposition parameters necessary for manufacturing low-loss superconducting niobium films.

A superconducting niobium triaxial cavity was investigated to determine its suitability for measuring the residual surface resistance of copper samples that were sputter-coated …

Computer Simulations Of Electromigration Based On A Molecular Dynamics Approach, John Stephen Peake

Electrical & Computer Engineering Theses & Dissertations

Most research on electromigration has centered around macroscopic simulations of electromigration where a value for the diffusion coefficient was assumed to be spatially uniform throughout the material. The research in this thesis goes a step further and, through microscopic molecular dynamics computer simulations, calculates and updates the atomic drift velocity and atomic position as a function of time to analyze how various defects within the conductor affect these quantities. The simulations are carried out with defects in the form of dislocation half-planes placed in different locations within the simulation space. The atomic drift velocity and position changes derived from these …