Engineering Physics Commons^™

Beam Dynamics Studies Of Parallel-Bar Deflecting Cavities, S. Ahmed, G. A. Krafft, K. Deitrick, Subashini U. De Silva, Jean R. Delayen, M. Spata, M. Tiefenback, A. Hofler, K. Beard

Physics Faculty Publications

We have performed three-dimensional simulations of beam dynamics for parallel-bar transverse electromagnetic mode (TEM) type RF separators: normal- and superconducting. The compact size of these cavities as compared to conventional TM110 type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of eight 2-cell normal conducting cavities or a one- or two-cell superconducting structure are enough to produce the required vertical displacement at the Lambertson magnet. Both the normal and superconducting structures show very small emittance dilution due to the …

Fundamental And Hom Coupler Design Of The Superconducting Parallel-Bar Cavities, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity [1] is currently being considered as a deflecting system for the Jefferson Lab 12 GeV upgrade and as a crabbing cavity for a possible LHC luminosity upgrade. Currently the designs are optimized to achieve lower surface fields within the dimensional constraints for the above applications. A detailed analysis of the fundamental input power coupler design for the parallel-bar cavity is performed considering beam loading and the effects of microphonics. For higher beam loading the damping of the HOMs is vital to reduce beam instabilities generated due to the wake fields. An analysis of threshold impedances for …

Design Of Superconducting Parallel Bar Cavities For Deflecting/Crabbing Applications, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar cavity is a deflecting/ crabbing cavity with attractive properties, compared to other conventional designs, that is currently being considered for a number of applications. The new parallel-bar design with curved loading elements and circular or elliptical outer conductors have improved properties compared to the designs with rectangular outer conductors. We present the designs proposed as the deflecting cavities for the Jefferson Lab 12 GeV upgrade and for Project-X and crabbing cavities for the proposed LHC luminosity upgrade and electron-ion collider at Jefferson Lab.

Crab Crossing Schemes And Studies For Electron Ion Collider, S. Ahmed, Y. Derbenev, V. Morozov, A. Castilla, Geoffrey A. Krafft, B. Yunn, Subashini U. De Silva, Jean R. Delayen

Physics Faculty Publications

This report shows our progress in crab crossing consideration for future electron-ion collider envisioned at JLab. In this design phase, we are evaluating two crabbing schemes viz., the deflecting and dispersive. The mathematical formulations and lattice design for these schemes are discussed in this paper. Numerical simulations involving particle tracking through a realistic deflecting RF cavity and optics illustrate the desired crab tilt of 25 mrad for 1.35 MV. Evolution of beam propagation are shown which provides the physical insight of the crabbing phenomenon.

Design Of Low-Frequency Superconducting Spoke Cavities For High-Velocity Applications, Jean R. Delayen, C. S. Hopper, R. G. Olave

Physics Faculty Publications

Superconducting single- and multi-spoke cavities have been designed to-date for particle velocities from β~0.15 to β~0.65. Superconducting spoke cavities may also be of interest for higher-velocity, low-frequency applications, either for hadrons or electrons. We present the design of 325 and 352 MHz spoke cavities optimized for β=0.8 and β=1.

Design Of Superconducting Multi-Spoke Cavities For High Velocity Applications, C. S. Hopper, Jean R. Delayen

Physics Faculty Publications

Superconducting spoke cavities have been designed and tested for particle velocities up to β₀ ~ 0.6 and are currently being designed for velocities up to β₀ = 1. We present the electromagnetic designs for two-spoke cavities operating at 325 MHz for β₀ = 0.82 and β₀ = 1.

Higher Order Mode Properties Of Superconducting Two-Spoke Cavities, C. S. Hopper, Jean R. Delayen, R. G. Olave

Physics Faculty Publications

Multi-Spoke cavities lack the cylindrical symmetry that many other cavity types have, which leads to a more complex Higher Order Mode (HOM) spectrum. In addition, spoke cavities offer a large velocity acceptance which means we must perform a detailed analysis of the particle velocity dependence for each mode's R/Q. We present here a study of the HOM properties of two-spoke cavities designed for high-velocity applications. Frequencies, R/Q and field profiles of HOMs have been calculated and are reported.

Conceptual Design Of A Polarized Medium Energy Electron-Ion Collider At Jlab, S. Ahmed, A. Bogacz, Ya. Derbenev, A. Hutton, Geoffrey Krafft, R. Li, V. Morozov, F. Pilat, R. Rimmer, Y. Roblin, T. Satogata, M. Spata, B. Terzić, M. Tiefenback, H. Wang, B. Yunn, Y. Zhang, P. Chetsov, Jean R. Delayen, Subashini Desilva, Hisham Sayed, V. Dudnikov, R. Johnson, F. Marhauser, M. Sullivan, S. Manikonda, P. N. Ostroumov, S. Abeyratne, B. Erdelyi, Y. Kim, A. Kondratenko

Physics Faculty Publications

A medium energy electron-ion collider is envisioned as the primary future of the JLab nuclear science program beyond the 12 GeV upgraded CEBAF. The present conceptual design selects a ring-ring collider option, covers a CM energy range up to 65 GeV for collisions of polarized electrons with polarized light ions or unpolarized light to heavy ions, and reaches a luminosity at above 10³⁴ cm^-2s^-1 per detector over multiple interaction points. This paper presents a brief description of the current conceptual design of the accelerator.

Design Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities With Improved Properties, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. All designs to-date have been based on straight loading elements and rectangular outer conductors. We present new designs of parallel-bar cavities using curved loading elements and circular or elliptical outer conductors, with significantly improved properties such as reduced surface fields and wider higher-order mode separation.

Design Of Superconducting Parallel Bar Deflecting/Crabbing Cavities, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. We present an analysis of several designs of parallel-bar cavities and their electromagnetic properties.

Multipacting Analysis Of The Superconducting Parallel-Bar Cavity, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity [1] is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. Multipacting can be a limiting factor to the performance of in any superconducting structure. In the parallel-bar cavity the main contribution to the deflection is due to the transverse deflecting voltage, between the parallel bars, making the design potentially prone to multipacting. This paper presents the results of analytical calculations and numerical simulations of multipacting in the parallel-bar cavity with resonant voltage, impact energies and corresponding particle trajectories.

Analysis Of Hom Properties Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity is currently being considered for a number of deflecting and crabbing applications due to improved properties and compact design geometries. The 499 MHz deflecting cavity proposed for the Jefferson Lab 12 GeV upgrade and the 400 MHz crab cavity for the proposed LHC luminosity upgrade are two of the major applications. For high current applications the higher order modes must be damped to acceptable levels to eliminate any beam instabilities. The frequencies and R/Q of the HOMs and mode separation are evaluated and compared for different parallel-bar cavity designs.

Mechanical Study Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities, Hyekyoung Park, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar deflecting/crabbing cavities have improved properties compared to conventional cavity structures. It is currently being considered for number of applications. The mechanical design analysis is performed on two designs of the 499 MHz parallel-bar deflecting cavity for the Jefferson Lab 12 GeV upgrade. The main purpose of the mechanical study is to examine the structural stability of the cavities under the operating conditions in the accelerators. The study results will suggest the need for additional structural strengthening. Also the study results will help to develop a concept of the tuning method. If the cavity is to be installed …

Significant Enhancement Of Upper Critical Fields By Doping And Strain In Iron-Based Superconductors, C. Tarantini, A. Gurevich, J. Jaroszynski, F. Balakirev, E. Bellingeri, I Pallecchi, C. Ferdeghini, B. Shen, H. H. Wen

Physics Faculty Publications

We report measurements of 85 Tesla of the upper critical fields H_c2(T) on Ba_1-xK_xAs₂Fe₂ single crystals and FeSe_1-xTe_x films tuned by doping and strain. We observed an H_c2 enhancement by more than 25 T at low temperatures for the optimally doped Ba_1-xK_xAs₂Fe₂ as compared to the previous measurements and extraordinarily high slopes of dH_c2/dT = 250-500 T/K near T_c in FeSe _1-xTe_x, indicating almost-complete suppression of orbital pair breaking. Theoretical analysis of H_{c2 …}

Structural Characterization Of Nb Films Deposited By Ecr Plasma Energetic Deposition On Crystalline Insulators, Xin Zhao, A. -M. Valente-Feliciano, J. K. Spradlin, H. L. Phillips, C. E. Reece, D. Gu, H. Baumgart, K. Seo

Physics Faculty Publications

An energetic condensation thin film coating technique with an electron cyclotron resonance (ECR) induced Niobium (Nb) plasma ion source is used to deposit Nb thin films on crystalline insulating substrates, such as a-plane and c-plane sapphire (Al₂O₃) and on magnesium oxide, MgO (100), (110), and (111).

Hetero-epitaxial Nb films were produced by ECR deposition with regulated substrate temperature. The residual resistivity ratio (RRR) of about 1 micron thick films on a-plane (1,1,-2,0) sapphire substrates reach values (350 - 450) comparable to high RRR bulk NB commonly used for SRF cavities.

The epitaxial relationship of Nb/crystalline substrate is found to be …

Ignition Of A Large Volume Plasma With A Plasma Jet, M. Laroussi, M. A. Akman

Electrical & Computer Engineering Faculty Publications

Here we report on a method to generate a long plasma plume and to ignite a large volume plasma by means of the jet. The plasma plume is generated by our tube reactor and then introduced into a chamber where the pressure is controlled. We discovered there are three operating phases:Aphasewhere the plume length remains approximately constant, followed by a second phase where the jet increases in length as the pressure decreases. Then at pressures below 70 Torr a mode transition occurs where the plume length decreases and the plasma expands until the entire chamber is filled.

Pulsed Laser Deposition Of Graphite Counter Electrodes For Dye-Sensitized Solar Cells, Krishna P. Acharya, Himal Khatri, Sylvain Marsillac, Bruno Ullrich, Pavel Anzenbacher, Mikhail Zamkov

Electrical & Computer Engineering Faculty Publications

We report on pulsed laser deposition of graphite onto flexible plastic and conductive glass substrates for use as a counter electrode in dye-sensitized solar cells. The efficiency of as-prepared graphite electrodes was tested using CdS-sensitized solar cell architecture resulting in external quantum efficiency comparable to that of conventional platinum counter electrodes. This work highlights the possibility of using pulsed laser deposited graphite as a low-cost alternative to platinum, which could be fabricated both on flexible and rigid substrates.

Simulation Of Temperature Distributions In Tissue Upon Laser Pulse Irradiation Including Water Mass Transfer, Deepthi Nagulapally

Electrical & Computer Engineering Theses & Dissertations

Lasers, due to their unique characteristics, have tremendous applications in the medical field. Generally all laser applications in hie-medicine involve the propagation of laser energy through tissue. Energy is deposited giving rise to many physical, hie-chemical, and mechanical effects. Among these are dynamical changes in the local temperature distributions within the tissue. Analysis of the temperature changes requires the creation of an appropriate optical transmission and heat flow model that incorporates user specified laser parameters. Here, a numerical simulation model was developed to study both steady state and time dependent temperature distributions due to pulsed laser radiation within user specified …

Design Sensitivities Of The Superconducting Parallel-Bar Cavity, Subashini U. De Silva, Jean Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity has properties that makes it attractive as a deflecting or crabbing rf structure. For example it is under consideration as an rf separator for the Jefferson Lab 12 GeV upgrade and as a crabbing structure for a possible LHC luminosity upgrade. In order to maintain the purity of the deflecting mode and avoid mixing with the near accelerating mode caused by geometrical imperfection, a minimum frequency separation is needed which depends on the expected deviations from perfect symmetry. We have done an extensive analysis of the impact of several geometrical imperfections on the properties of the …

Applications Of Spoke Cavities, Jean R. Delayen

Physics Faculty Publications

The superconducting spoke cavity was introduced in the late 1980s in response to the need for superconducting structures in the mid-velocity range. Since then it has found application in many projects. Prototypes have been developed for a wide range of beam velocities. The characteristics and features of the spoke cavity are reviewed and some of their applications are presented.

Finite Element Analysis Of Ring-Shaped Emission Profile In Plasma Bullet, Yukinori Sakiyama, David B. Graves, Julien Jarrige, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

Using a one-way coupled model of neutral gas flow and plasma dynamics we report a mechanism to explain the ring-shaped emission pattern that has been observed experimentally in plasma bullets at atmospheric pressure. We solve a fluid model with the local field approximation in one-dimensional cylindrical coordinates, corresponding to a cross-section of a plasma bullet. Pulselike uniform electric field is assumed to be applied perpendicular to the simulation domain. Time and spatially resolved spectroscopic measurements support the simulation results.

Comment On "Superfluid Turbulence From Quantum Kelvin Wave To Classical Kolmogorov Cascades", Jeffrey Yepez, George Vahala, Linda L. Vahala, Min Soe

Electrical & Computer Engineering Faculty Publications

No abstract provided.

Coupled Ray-Tracing And Fokker-Planck Ebw Modeling For Spherical Tokamaks, Jakub Urban, Joan Decker, Y. Peysson, Josef Preinhaelter, Gary Taylor, Linda L. Vahala, George Vahala

Electrical & Computer Engineering Faculty Publications

The AMR (Antenna—Mode-conversion—Ray-tracing) code [1, 2] has been recently coupled with the LUKE [3] Fokker-Planck code. This modeling suite is capable of complex simulations of electron Bernstein wave (EBW) emission, heating and current drive. We employ these codes to study EBW heating and current drive performance under spherical tokamak (ST) configurations—typical NSTX discharges are employed. EBW parameters, such as frequency, antenna position and direction, are varied and optimized for particular configurations and objectives. In this way, we show the versatility of EBWs.

Design Optimization Of Superconducting Parallel-Bar Cavities, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The parallel-bar structure is a new superconducting geometry whose features and properties may have significant advantages over conventional superconducting deflecting and crabbing cavities for a number of applications. Jefferson Lab is in need for a 499 MHz, 11 GeV rf separator as part of its 12 GeV upgrade program. We report on design optimization studies performed todate for this and other applications.

Options For An 11 Gev Rf Beam Separator For The Jefferson Lab Cebaf Upgrade, Jean R. Delayen, M. Spata, H. Wang

Physics Faculty Publications

The CEBAF accelerator at Jefferson Lab has had, since first demonstration in 1996, the ability to deliver a 5-pass electron beam to experimental halls (A, B, and C) simultaneously. This capability is provided by a set of three, room temperature 499 MHz rf separators in the 5th pass beamline. The separator cavity is a two-rod, two-cell TEM mode type resonator, which has high shunt impedance. The 12 GeV baseline design does not preserve the capability of separating the 5th pass, 11 GeV beam for the 3 existing halls. Several options for restoring this capability, including extension of the present room …

A New Tem-Type Deflecting And Crabbing Rf Structure, Jean R. Delayen, H. Wang

Physics Faculty Publications

A new type of rf structure for the deflection and crabbing of particle bunches is introduced. It is comprised of a number of parallel TEM-resonant lines operating in opposite phase from each other. One of its main advantages is its compactness compared to conventional crabbing cavities operating in the TM110 mode, thus allowing low frequency designs. The properties and characteristics of this type of structure are presented.

Measurement Of Direct Fₒ(980) Photoproduction On The Proton, K. P. Adhikari, H. Bagdasaryan, S. Bültmann, S. L. Careccia, K. V. Dharmawardane, G. E. Dodge, N. Kalantarians, A. Klein, A.V. Klimenko, S. E. Kuhn, J. Lanchiet, M. R. Niroula, J. Zhang

Physics Faculty Publications

We report on the results of the first measurement of exclusive f₀(980) meson photoproduction on protons for E_γ = 3.0–3.8  GeV and −t = 0.4–1.0  GeV² . Data were collected with the CLAS detector at the Thomas Jefferson National Accelerator Facility. The resonance was detected via its decay in the π⁺π⁻ channel by performing a partial wave analysis of the reaction γp→pπ⁺π⁻ . Clear evidence of the f₀(980) meson was found in the interference between P and S waves at M _π+π− ∼1  GeV. The S -wave differential …

Biomarker Identification For Prostate Cancer Using An Efficient Feature Selection Algorithm, Vamsi Krishnam Raju Mantena

Electrical & Computer Engineering Theses & Dissertations

In recent years, there has been an increased interest in using protein mass spectrometry to identify biomarkers that discriminate diseased from healthy individuals. A biomarker is a characteristic that is objectively measured and evaluated as an indicator of normal biological processes, pathological processes, or pharmacological responses to a therapeutic intervention. Identifying biomarkers will be an important step towards disease characterization and patient management. One challenge of biomarker identification is how to handle the high dimensional mass spectral data. In this thesis, we applied an efficient feature selection algorithm to mass spectrometry data obtained from prostate tissue samples to identify prostate …

Studies Of Breakdown In A Pressurized Rf Cavity, M. Bastaninejad, A. A. Elmustafa, C. M. Ankenbrandt, A. Moretti, M. Popovic, K. Yonehara, D. M. Kaplan, M. Alsharo'a, P. M. Hanlet, R. P. Johnson, M. Kuchnir, D. Newsham, D. V. Rose, C. Thoma, D. R. Welch

Mechanical & Aerospace Engineering Faculty Publications

Microscopic images of the surfaces of metallic electrodes used in high-pressure gas-filled 805 MHz RF cavity experiments [1] have been used to investigate the mechanism of RF breakdown [2]. The images show evidence for melting and boiling in small regions of ∼10 micron diameter on tungsten, molybdenum, and beryllium electrode surfaces. In these experiments, the dense hydrogen gas in the cavity prevents electrons or ions from being accelerated to high enough energy to participate in the breakdown process so that the only important variables are the fields and the metallic surfaces. The distributions of breakdown remnants on the electrode surfaces …

Advances On Elic Design Studies, S. A. Bogacz, P. Chevtsov, Ya. Derbenev, P. Evtushenko, G. Krafft, A. Hutton, R. Li, L. Merminga, J. Musson, B. Yunn, Y. Zhang, H. Sayed

Physics Faculty Publications

An electron-ion collider of a center-of-mass energy up to 90 GeV at luminosity up to 10³⁵ cm^-2s^-1 with both beams highly polarized is essential for exploring the new QCD frontier of strong color fields in nuclear and precisely imaging the sea-quarks and gluons in the nucleon. A conceptual design of a ring-ring collider based on CEBAF (ELIC) with energies up to 9 GeV for electrons/positrons and up to 225 GeV for protons and 100 GeV/u for ions has been proposed to fulfill the science desire and to serve as the next step for CEBAF after the …