Engineering Physics Commons^™

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

An Analytical Framework For Quantifying Urban And Community Resilience To Natural Hazards From Cell-Phone Gps-Location And Traffic-Flow Data, Georgios Chatzikyriakidis

Civil and Environmental Engineering Theses and Dissertations

Urban areas are increasingly exposed to natural hazards while accommodating a growing share of the global population, yet a consistent science-based framework for quantifying urban and community resilience remains lacking. This dissertation develops a physics-based analytical framework grounded in statistical mechanics and the quantitative theory of Brownian motion. A city is conceptualized as a complex medium in which citizens move analogously to Brownian particles within a viscoelastic environment, influenced by socioeconomic interactions and infrastructure functionality.

A central premise is that urban resilience, interpreted as engineering resilience (an outcome), can be quantified through a single metric: the mean-square displacement MSD=⟨r²(t)⟩, of …

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Signal Modeling Of High Purity Germanium Detectors, Brooke Parker Thibodeau

Honors Scholar Theses

Pulse shape analysis can be used to analyze radiation incident on a semiconductor diode detector. Finite element analysis (FEA) can be used to simulate high purity germanium detectors with user-specified geometry, impurity concentration, and bias voltage. Subsequent streamline calculation can be used to conduct pulse shape analysis for single and multiple site gamma-ray interactions within the detector volume. Cross sections of the detector can be visualized by contour plots of the electric field, drift velocity magnitude, and collection time, as well as t30 and t90 rise-time values.

Josephson Junctions: Fabrication And Applications For The Axion Dark Matter Experiment, Jonah M. Sachs

Senior Honors Papers / Undergraduate Theses

The observation of axions could revolutionize the world of physics. Through microwave frequency cavity readout of the photons associated with these axions, the ADMX project at WashU utilizes multiple different forms of the Josephson junction (JJ), a superconductive circuit element. The physics behind the JJ are essential to understanding its operation for resonant cavity readout in addition to parametric amplification. Parametric amplifiers produced using JJs can approach the signal-to-noise ratio set by quantum mechanics, and prove essential for the amplification chain used by the ADMX experiment for axionic detection. The limits of these amplifiers are set by the noise tuning …

Novel Approach For The Micro Cracks Detection Of Solar Wafers And Cells, Mohd Israil, Arvind Kumar Sharma, Ekta Gupta

Al-Bahir

This paper deals with the review of various existing technique for the microcracks detection in silicon solar cell and wafer. In addition to this, we proposed a novel approach for the machine learning technique for the inspection of the cracks those are existed in the solar cell and wafer and not able to detect by the naked eyes. There are many techniques have been developed by the various researchers around the world to inspect solar cells for defect. All the techniques discussed in this article having some features and some weakness too. This paper present here gives the two-fold solution …

Development Of Group Iii-V Quantum Confinement-Enabled Detectors: Bias-Tunable Quantum Well Infrared Photodetector (Qwip) And Quantum Dot Scintillation Detector (Qdsd), Gyana R. Biswal

Electronic Theses & Dissertations (2024 - present)

This dissertation discloses the physics, fabrication, characterization, and analysis of two novel types of group III-V semiconductor detectors relying on quantum confinement of carriers, namely voltage-tunable quantum well infrared photodetectors (QWIP) and a high-yield ultrafast quantum dot scintillation detector (QDSD). Both QWIP and QDSD heterostructures presented here were grown on 3” GaAs (001) substrates using molecular beam epitaxy (MBE).

A major part of the dissertation focuses on development of the voltage-tunable QWIPs targeting detection in the mid-wave infrared region (MWIR) (3μm -5μm) and long-wave infrared region (LWIR) (8μm -12μm) with control of sensitivity by the applied bias. The QWIPs utilize …

Investigation Of New Superconducting Materials For The Next Generation High-Performance Rf Superconducting Cavities For Particle Accelerators, Alex Gurevich, Jean Delayen, Chang-Beom Eom, Gianluigi Ciovati

Physics Faculty Publications

In this DOE-funded project DE-SC0010081-020 Old Dominion University (ODU) in collaboration with University of Wisconsin (UW) and Jefferson Laboratory have investigated both experimentally and theoretically electromagnetic response and losses in multilayered superconducting structures made of new SRF materials which can push the field and Q performance limits of accelerating cavities.

Preparation Of Mocvd-Grown Photocathodes Containing A Strained Gaas/Gaasp Superlattice, G. Blume, A. Masters, J. Grames, M. Stutzman, M. Grau, S. Marsillac

Physics Faculty Publications

In this work, we investigate heat cleaning options for high-polarization GaAs/GaAsP strained-superlattice (SSL) photocathodes with a distributed Bragg reflector (DBR) that were grown using metalorganic chemical vapor deposition (MOCVD). This was done using a microMott polarimeter at Jefferson Lab to optimize both quantum efficiency and polarization. The fabrication process for MOCVD-grown photocathodes does not allow for the inclusion of an arsenic cap, contrary to what is done when fabricating photocathodes using molecular-beam epitaxy (MBE). Without proper preparation, the performance of MOCVD-grown photocathodes can be limited due to surface contamination. Here, we varied both duration and temperature of the heat cleaning …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Optimizing Superconducting Nb Film Cavities By Mitigating Medium-Field Q-Slope Through Annealing, B. Abdisatarov, G. Eremeev, H. E. Elsayed-Ali, D. Bafia, A. Murthy, Z. Sung, A. Netepenko, A. Romanenko, C. P.A. Carlos, G. J. Rosaz, S. Calatroni, S. Leith, A. Grassellino

Electrical & Computer Engineering Faculty Publications

Niobium films are of interest in applications in various superconducting devices, such as superconducting radiofrequency cavities for particle accelerators and superconducting qubits for quantum computing. In this study, we address the persistent medium-field Q-slope issue in Nb film cavities, which, despite their high-quality factor at low RF fields, exhibit a significant Q-slope at medium RF fields compared to bulk Nb cavities. Traditional heat treatments, effective in reducing surface resistance and mitigating the Q-slope in bulk Nb cavities, are challenging for Nb-coated copper cavities. To overcome this challenge, we employed DC bias high-power impulse magnetron sputtering to deposit …

Magnetic Nano And Micro Rods As Tools For Characterizing Materials Mechanical Properties: Fundamentals And Applications, Artis Brasovs

All Dissertations

The focus of this dissertation is insect blood (Hemolymph). Hemolymph is analyzed by taking a materials science approach. Rheological characterization of hemolymph has been performed for the first time. Owing to a minute amount of available material, a new protocol was established where Magnetic Rotational Spectroscopy (MRS) with ferromagnetic nanorods was employed. The challenge was examining the microliter droplets' viscosity in less than a few minutes. This challenge was successfully resolved.

Blood is critical for the insect's survival: after wounding, the insect has to seal the wound quickly, in a few minutes. As the mechanism of fast clotting has never …

Luminescent Coupling In Perovskite Tandem Solar Cells: The Advantages Of Perovskite And Luminescent Coupling In Photovoltaics, Briana Dokken

Senior Seminars and Capstones

Multijunction or tandem solar cells are made of multiple semiconductor light absorbing layers. Having multiple absorber layers in a solar cell allows it to absorb a larger range of the solar spectrum. When electrons recombine (relax to a lower energy state) in the top layer of a tandem solar cell, they can emit luminescent photons that are absorbed by the bottom layer of the cell. This process is called luminescent coupling, and it can be used to enhance the performance of photovoltaic cells. Another strategy to increase solar cell performance is to use perovskite as the absorber layer material. Currently, …

A Computational Investigation Of Wood Selection For Acoustic Guitar, Jonah Osterhus

Senior Honors Theses

The acoustic guitar is a stringed instrument, often made of wood, that transduces vibrational energy of steel strings into coupled vibrations of the wood and acoustic pressure waves in the air. Variations in wood selection and instrument geometry have been shown to affect the timbre of the acoustic guitar. Computational methods were utilized to investigate the impact of material properties on acoustic performance. Sitka spruce was deemed the most suitable wood for guitar soundboards due to its acoustic characteristics, strength, and uniform aesthetic. Mahogany was deemed to be the best wood for the back and sides of the guitar body …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Physics Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Physics Undergraduate Honors Theses

Mechanical Exfoliation

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

A Comprehensive Investigation Of The Influence Of Geometric Structure On The Shape Memory Performance Of Nafion, Jade Thomas

Mechanical Engineering Undergraduate Honors Theses

While perfluorosulfonic acid (PFSA) membranes have primarily been used in fuel cells due to their chemical, thermal, and mechanical stability, one PFSA, Nafion, boasts two unique characteristics: a broad glass transition (~55 °C to 130 °C) and a temperature-persistent electrostatic network. The combination of these two characteristics endows Nafion with exceptional shape memory properties – the ability of a material to morph and transform into pre-programmed shapes when exposed to an external stimulus – with enhanced permanent shape memorization, and a potentially near-infinite number of temporary shape memorization. This study focused on expanding the base of knowledge surrounding Nafion’s shape …

Numerical Simulation Of Laser Induced Elastic Waves In Response To Short And Ultrashort Laser Pulses., Alireza Zarei

All Dissertations

In an era of intensified market competition, the demand for cost-effective, high-quality, high-performance, and reliable products continues to rise. Meeting this demand necessitates the mass production of premium products through the integration of cutting-edge technologies and advanced materials while ensuring their integrity and safety. In this context, Nondestructive Testing (NDT) techniques emerge as indispensable tools for guaranteeing the integrity, reliability, and safety of products across diverse industries.

Various NDT techniques, including ultrasonic testing, computed tomography, thermography, and acoustic emissions, have long served as cornerstones for inspecting materials and structures. Among these, ultrasonic testing stands out as the most prevalent method, …

Drag Reduction In Channel Flow Configurations For Laminar And Turbulent Flow Past Superhydrophobic Surfaces, Henry Louis Ems

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

In this work, we present friction drag reduction in minichannel laminar flow past superhydrophobic metallic surfaces. Femtosecond laser surface processing (FLSP), a one-step scalable method, was used to create permanent microscale and nanoscale structures on 316 stainless steel plates. The resulting superhydrophilic plates were covered by tall (215 μm) or short (27 μm) structures. The FLSP plates were then transitioned to superhydrophobic by evaporative deposition of a fluorinated silane, a low surface energy coating. Using purified water, the friction factor was obtained by measuring pressure drop along a minichannel with a rectangular cross section for flow rates corresponding …

The Analysis Of Mechanical Exfoliation Of Graphene For Various Fabrication And Automation Techniques, Lance Yarbrough

Mechanical Engineering Undergraduate Honors Theses

Mechanical Exfoliation of Graphene is an often-overlooked portion of the fabrication of quantum devices, and to create more devices quickly, optimizing this process to generate better flakes is critical. In addition, it would be valuable to simulate test pulls quickly, to gain insight on flake quality of various materials and exfoliation conditions. Physical pulls of graphene at various temperatures, pull forces, and pull repetitions were analyzed and compared to the results of ANSYS simulations, solved for similar results. Using ANSYS’ ability to predict trends in exfoliations, flake thickness and coverage using stress and deflection analyses were investigated. Generally, both strongly …

Effect Of Fabrication Parameters On The Ferroelectricity Of Hafnium Zirconium Oxide Films: A Statistical Study, Guillermo A. Salcedo, Ahmad E. Islam, Elizabeth Reichley, Michael Dietz, Christine M. Schubert Kabban, Kevin D. Leedy, Tyson C. Back, Weison Wang, Andrew Green, Timothy S. Wolfe, James M. Sattler

Faculty Publications

Ferroelectricity in hafnium zirconium oxide (Hf_1−xZr_xO₂) and the factors that impact it have been a popular research topic since its discovery in 2011. Although the general trends are known, the interactions between fabrication parameters and their effect on the ferroelectricity of Hf_1−xZr_xO₂ require further investigation. In this paper, we present a statistical study and a model that relates Zr concentration (x), film thickness (t_f), and annealing temperature (T_a) with the remanent polarization (P_r) in tungsten (W)-capped Hf_1−xZr_xO₂. …

The Behavior Of ½⟨111⟩ Screw Dislocations In W–Mo Alloys Analyzed Through Atomistic Simulations, Lucas A. Heaton, Kevin Chu, Adib J. Samin

Faculty Publications

Analyzing plastic flow in refractory alloys is relevant to many different commercial and technological applications. In this study, screw dislocation statics and dynamics were studied for various compositions of the body-centered cubic binary alloy tungsten–molybdenum (W–Mo). The core structure did not appear to change for different alloy compositions, consistent with the literature. The pure tungsten and pure molybdenum samples had the lowest plastic flow, while the highest dislocation velocities were observed for equiatomic, W_0.5Mo_0.5 alloys. In general, dislocation velocities were found to largely align with a well-established dislocation mobility phenomenological model supporting two discrete dislocation mobility regimes, …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov

Theses and Dissertations

This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …

Thermal Diffusivity And Acoustic Properties Of Nb Thin Films Studied By Time-Domain Thermoreflectance, Md. Obidul Islam, Hani Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The thermal diffusion and acoustic properties of Nb impacts the thermal management of devices incorporating Nb thin films such as superconducting radiofrequency (SRF) cavities and superconducting high-speed electronic devices. The diffusion and acoustic properties of 200-800 nm thick Nb films deposited on Cu substrates were investigated using time-domain thermoreflectance (TDTR). The films were examined by X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The grain size and thermal diffusivity increase with film thickness. The thermal diffusivity increased from 0.100± 0.002 cm²s^-1 to 0.237± 0.002 cm²s^-1 with the increase in film thickness from 200 …

Direct Measurement Of Microwave Loss In Nb Films For Superconducting Qubits, B. Abdisatarov, D. Bafia, A. Murthy, G. Eremeev, H. E. Elsayed-Ali, J. Lee, A. Netepenko, C. P. A. Carlos, S. Leith, G. J. Rosaz, A. Romanenko, A. Grassellino

Electrical & Computer Engineering Faculty Publications

Niobium films are a key component in modern two-dimensional superconducting qubits, yet their contribution to the total qubit decay rate is not fully understood. The presence of different layers of materials and interfaces makes it difficult to identify the dominant loss channels in present two-dimensional qubit designs. In this paper, we present the study that directly correlates measurements of RF losses in such films to material parameters by investigating a high-power impulse magnetron sputtered (HiPIMS) film atop a three-dimensional niobium superconducting radio frequency (SRF) resonator. By using a 3D SRF structure, we are able to isolate the niobium film loss …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Characterization Of Interlayer Laser Shock Peening During Fused Filament Fabrication Of Polylactic Acid (Pla), Fabien Denise

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The field of additive manufacturing (AM) has gained a significant amount of popularity due to the increasing need for more sustainable manufacturing techniques and the adaptive development of complex product geometries. The problem is that AM parts routinely exhibit flaws or weaknesses that affect functionality or performance. Over the years, surface treatments have been developed to compensate certain flaws or weaknesses in manufactured products. Combining surface treatments with the modularity of additive manufacturing could lead to more adaptable and creative improvements of product functions in the future. The current work evaluates the feasibility of pursuing a new research axis in …

Impact Of Silicon Ion Irradiation On Aluminum Nitride-Transduced Microelectromechanical Resonators, David D. Lynes, Joshua Young, Eric Lang, Hengky Chandrahalim

Faculty Publications

Microelectromechanical systems (MEMS) resonators use is widespread, from electronic filters and oscillators to physical sensors such as accelerometers and gyroscopes. These devices' ubiquity, small size, and low power consumption make them ideal for use in systems such as CubeSats, micro aerial vehicles, autonomous underwater vehicles, and micro-robots operating in radiation environments. Radiation's interaction with materials manifests as atomic displacement and ionization, resulting in mechanical and electronic property changes, photocurrents, and charge buildup. This study examines silicon (Si) ion irradiation's interaction with piezoelectrically transduced MEMS resonators. Furthermore, the effect of adding a dielectric silicon oxide (SiO₂) thin film is …