Engineering Physics Commons^™

Evaluation Of The Effects Of A Plasma Activated Medium On Cancer Cells, S. Mohades, M. Laroussi, J. Sears, N. Barekzi, H. Razavi

Electrical & Computer Engineering Faculty Publications

The interaction of low temperature plasma with liquids is a relevant topic of study to the field of plasma medicine. This is because cells and tissues are normally surrounded or covered by biological fluids. Therefore, the chemistry induced by the plasma in the aqueous state becomes crucial and usually dictates the biological outcomes. This process became even more important after the discovery that plasma activated media can be useful in killing various cancer cell lines. Here, we report on the measurements of concentrations of hydrogen peroxide, a species known to have strong biological effects, produced by application of plasma to …

A Prototype Microwave Cavity Control Circuit For Use In Next Generation Free Electron Laser, Josh Thompson, Peter Neal Barrina, Jiayi Jiang, Joe Frisch, Steve Smith, Daniel Van Winkle

STAR Program Research Presentations

One of the current programs at SLAC National Accelerator Laboratory is the Linac Coherent Light Source, or LCLS. Using the existing hardware of the last third of their linear accelerator (or “linac”), SLAC has created one of the most energetic X-ray free electron lasers (or “FEL”). Since 2009, LCLS has used this FEL to perform a wide range of experiments across all sciences, most notably ultrafast filming at the molecular scale. As requests for beam-time with this laser increases, SLAC is purposing a linac upgrade to better match this demand. This upgrade, named LCLS-II, will replace existing copper radio frequency …

Effect Of Z1/2, Eh5, And Ci1 Deep Defects On The Performance Of N-Type 4h-Sic Epitaxial Layers Schottky Detectors: Alpha Spectroscopy And Deep Level Transient Spectroscopy Studies, M. A. Mannan, S. K. Chaudhuri, K. V. Nguyen, K. C. Mandal

Faculty Publications

No abstract provided.

Rubidium-Based Atomic Clock, Kate Miles

Physics

In this paper we will explore the process of building an atomic clock from a function generator, go into an in-depth introductory discussion of the Datum LPRO, and examine how rubidium function generators work.

Electrical Characterization Of Spherical Copper Oxide Memristive Array Sensors, James P. Orta

Theses and Dissertations

A new System Protection (SP) technology is explored by using electrical and mechanical interference-sensing devices that are implemented with granular memristive material. The granular materials consist of oxide-coated copper spheres with radii of about 700 µm that are placed in contact to produce thin oxide junctions which exhibit memristive behavior. Processes for etching, which compared acetic acid and nitric acid etches, and thermal oxidation at 100°C are performed and compared to produce copper spheres with a copper oxide layer over the sphere surface. Oxidized copper spheres are tested as sensor arrays by loading into a capillary tube in an aligned …

Synthesis And Optimization Of Vo₂ Thin Films For Phase Transition Applications By Atomic Layer Deposition And Rf Magnetron Sputtering, Madhavi Tangirala

Electrical & Computer Engineering Theses & Dissertations

Among many Vanadium oxides and suboxides, VO₂ has received considerable attention due to its remarkable metal-insulator transition (MIT) or semiconductor-metal transition (SMT) behavior, a reversible change in its electrical and optical properties that occurs due to a phase transition near a temperature of 68°C. Electrically, the resistivity of VO₂ can be changed as large as 4-5 orders of magnitude. Optically, the transmittance drops dramatically above the transition temperature in the metallic state where the VO₂ film becomes highly reflective in the infrared region. All these properties result in structural phase transformation from a low temperature monoclinic to …

Control System Of An Atomic Layer Deposition (Ald) Machine, Nitin Vishnu Hegde

Electrical & Computer Engineering Theses & Dissertations

Atomic Layer Deposition is one of the most efficient deposition processes for obtaining ultrathin films. The deposition by this process happens one atomic layer at a time. ALD is known for its precision and ability to develop quality films with great thickness control. ALD machines simultaneously control DC and AC currents, low pressure operations, temperature control and heating (up to 500'C), precision flow control, precision timing intervals for deposition (milli-second intervals) and constantly monitor temperature. Such a high control comes at a high price. Furthermore, at the university level, the capacity to modify or enhance a machine is critical but …

Feedback Stabilization At Spear3, Daniel Kelley, Jeff Corbett

STAR Program Research Presentations

The SPEAR3 synchrotron lightsource at SLAC relies on a sophisticated radio frequency (RF) timing system to maintain current – electrons – in the storage ring. One problem SPEAR3 operators have dealt with is the thermal expansion of one of the cables supporting this RF timing system. As the cable expands and contracts with the diurnal rise and fall of the sun, the phase of the RF in the cable shifts. This shifting phase affects the timing accuracy of electron injections into the storage ring.

A common feedback control algorithm PID (Proportional Integral Derivative) has countless applications in engineering. PID feedback …

Study Of A Non-Equilibrium Plasma Pinch With Application For Microwave Generation, Ahmad Al Agry

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Non-Equilibrium Plasma Pinch (NEPP), also known as the Dense Plasma Focus (DPF) is well known as a source of energetic ions, relativistic electrons and neutrons as well as electromagnetic radiation extending from the infrared to X-ray. In this dissertation, the operation of a 15 kJ, Mather type, NEPP machine is studied in detail. A large number of experiments are carried out to tune the machine parameters for best performance using helium and hydrogen as filling gases. The NEPP machine is modified to be able to extract the copious number of electrons generated at the pinch. A hollow anode with …

Modeling A Sensor To Improve Its Efficacy, Nabin K. Malakar, Daniil Gladkov, Kevin H. Knuth

Physics Faculty Scholarship

Robots rely on sensors to provide them with information about their surroundings. However, high-quality sensors can be extremely expensive and cost-prohibitive. Thus many robotic systems must make due with lower-quality sensors. Here we demonstrate via a case study how modeling a sensor can improve its efficacy when employed within a Bayesian inferential framework. As a test bed we employ a robotic arm that is designed to autonomously take its own measurements using an inexpensive LEGO light sensor to estimate the position and radius of a white circle on a black field. The light sensor integrates the light arriving from a …

Reversible Mn Segregation At The Polar Surface Of Lithium Tetraborate, Christina L. Dugan, Robert L. Hengehold, Stephen R. Mchale, Juan A. Colon Santana, John W. Mcclory, Volodymyr T. Adamiv, Yaroslav V. Burak, Ya B. Losovyj, Peter A. Dowben

Faculty Publications

We find Mn surface segregation for single crystals of Mn doped Li₂B₄O₇, nominally Li_1.95Mn_0.05B₄O₇(001), but as the temperature increases, evidence of this Mn surface segregation diminishes significantly. At room temperature, the surface photovoltaic charging is significant for this pyroelectric material but is quenched at a temperature well below that seen for the undoped Li₂B₄O₇ samples. The suppression of surface charging in the region of 120 °C that accompanies the temperature of Mn dissolution in the bulk of Li₂B_{4 …}

Examining The Validity Of Using A Gaussian Schell-Model Source To Model The Scattering Of A Fully Coherent Gaussian Beam From A Rough Impedance Surface, Santasri Basu, Milo W. Hyde Iv, Salvatore J. Cusumano, Michael A. Marciniak, Steven T. Fiorino

Faculty Publications

Military applications that use adaptive optics (AO) often require a point source beacon at the target to measure and correct for wavefront aberrations introduced by atmospheric turbulence. However, turbulence prevents the formation of such a point beacon. The extended beacons that are created instead have finite spatial extents and exhibit varying degrees of spatial coherence. Modeling these extended beacons using a Gaussian Schell-model (GSM) form for the autocorrelation function would be a convenient approach due to the analytical tractability of Gaussian functions. We examine the validity of using such a model by evaluating the field scattered from a rough impedance …

Experimental Determination Of Electron-Hole Pair Creation Energy In 4h-Sic Epitaxial Layer: An Absolute Calibration Approach, S. K. Chaudhuri, K. J. Zavalla, K. C. Mandal

Faculty Publications

No abstract provided.

A Tunable Electromagnetic Band-Gap Microstrip Filter, Greg A. Lancaster

Master's Theses

In high frequency design, harmonic suppression is a persistent struggle. Non-linear devices such as switches and amplifiers produce unwanted harmonics which may interfere with other frequency bands. Filtering is a widely accepted solution, however there are various shortcomings involved. Suppressing multiple harmonics, if desired, with traditional lumped element and distributed component band-stop filters requires using multiple filters. These topologies are not easily made tunable either. A new filter topology is investigated called Electromagnetic Band-Gap (EBG) structures.

EBG structures have recently gained the interest of microwave designers due to their periodic nature which prohibits the propagation of certain frequency bands. EBG …

Solar Light Bulb, David G. Guzman, Virgilio Gonzalez

COURI Symposium Abstracts, Summer 2012

The Solar Lighting project is a work driven towards building a low-cost and environmental-friendly solar bulb and to understanding the science behind its behavior. A solar light bulb refers to a device capable of absorbing and transferring solar energy to light up an enclosed area. By using the physical properties of fluids and light is possible to manipulate solar light waves to illuminate an enclosed structure. Moreover, this project attempts to utilize recycled materials that reduce the cost of such device, helping not only the planet but also the costumer’s pocket. The ultimate goal for this project is to scientifically …

Dynamics Of Non-Thermal Plasma Jets Under Variable Pressure, Mehmet Arda Akman

Electrical & Computer Engineering Theses & Dissertations

Non-thermal plasma (NTP) jets driven by short DC pulses have attracted the attention of researchers within the past decade due to their promising bio-medical applications in the fields of wound healing, cancer treatment and sterilization. The ability to operate at atmospheric pressure, room temperature and simple device configuration has greatly contributed to their appeal and adoption in the plasma science community. However, the mechanisms that sustain the plasma generation and propagation in ambient air are currently a topic of debate. For instance, what appears as a continuous stream of a plasma plume extending outwards from a plasma device into the …

The Double Pendulum: Construction And Exploration, Benjamin J. Knudson

Physics

The exploration of a nonlinear mechanical system, the Double Pendulum, a physical pendulum on the end of a physical pendulum, using analytic and experimental approaches. Also included discussion of the design and construction of the Double Pendulum apparatus to work with Vernier LabPro and LoggerPro. The apparatus outputs live data of the angles to a LoggerPro which collects and produces time evolution graphs as well as a corresponding animation lending itself to comparison with theoretical models. Normal mode frequencies are found both analytically and experimentally for the the general (real) double pendulum. Examples of both simple (periodic) and complex (chaotic) …

Inductive Metal Identification, Paul Maggi

Electrical Engineering

This project focuses on creating a device to differentiate between various types of metals via magnetic induction. Magnetic induction is used because it is both non-optical and non-contact. It achieves this by generating a varying magnetic field, which induces eddy currents in the metal. These eddy currents produce small disturbances in the surrounding magnetic field, which can be sensed with Hall Effect Sensors (HES). The primary challenge in this project was generating a sufficiently strong magnetic field to detectable disturbances. In order to achieve better results, a stronger magnetic field must be used as well as more sensitive Hall Effect …

Low-Loss Meta-Atom For Improved Resonance Response, Derrick Langley, Ronald Coutu Jr., Peter J. Collins

Faculty Publications

Measurements of a meta-atom integrated with a low noise amplifier into the split-ring resonator are presented. A comparison is made between baseline meta-atoms and one integrated with a GaAs low noise amplifier. S-parameter measurements in a RF strip-line show the resonant frequency location. The resonance null is more prominent for the integrated meta-atom. Biasing the low noise amplifier from 0 to 7 VDC showed that the resonant null improved with biasing voltage. As the biasing voltage increases, the transmission null reduced from -11.82 to -23.21 dB for biases from 0 to 7 VDC at resonant frequency.

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

Growth Of Alkali Antimonide Photosensitive Thin Films, George Annobil

Electrical & Computer Engineering Theses & Dissertations

The experiment performed in this research addresses the growth of an alkali antimonide photosensitive film. Research was conducted to understand and develop a growth technique for a unique vapor deposition system in a vacuum environment. Specifically, the grown film will be utilized as a photocathode, and hence quantum efficiency (QE) and photocathode lifetime measurements are conducted. The research presents the successful growth of the binary compound cesium antimonide with achieved quantum efficiency of ~0.07% at ~240V anode bias. This experimental result demonstrated that the deposition technique was reliable in producing a feasible cathode. It further allowed the verification of theoretical …

Analysis Of Interband, Intraband, And Plasmon Polariton Transitions In Silver Nanoparticle Films Via In Situ Real-Time Spectroscopic Ellipsometry, S. A. Little, R. W. Collins, S. Marsillac

Electrical & Computer Engineering Faculty Publications

The dielectric function of Ag nanoparticle films, deduced from an analysis of in situ real-time spectroscopic ellipsometry (RTSE) measurements, is found to evolve with time during deposition in close consistency with the film structure, deduced in the same RTSE analysis. In the nucleation regime, the intraband dielectric function component is absent and plasmon polariton behavior dominates. Only at nuclei contact, does the intraband amplitude appear, increasing above zero. Both intraband and plasmon amplitudes coexist during surface smoothening associated with coalescence. The intraband relaxation time increases rapidly after surface smoothening is complete, also in consistency with the thin film structural evolution.

Structural Characterization Of Nb Films Deposited By Ecr Plasma Energetic Deposition On Crystalline Insulators, Xin Zhao, A. -M. Valente-Feliciano, J. K. Spradlin, H. L. Phillips, C. E. Reece, D. Gu, H. Baumgart, K. Seo

Physics Faculty Publications

An energetic condensation thin film coating technique with an electron cyclotron resonance (ECR) induced Niobium (Nb) plasma ion source is used to deposit Nb thin films on crystalline insulating substrates, such as a-plane and c-plane sapphire (Al₂O₃) and on magnesium oxide, MgO (100), (110), and (111).

Hetero-epitaxial Nb films were produced by ECR deposition with regulated substrate temperature. The residual resistivity ratio (RRR) of about 1 micron thick films on a-plane (1,1,-2,0) sapphire substrates reach values (350 - 450) comparable to high RRR bulk NB commonly used for SRF cavities.

The epitaxial relationship of Nb/crystalline substrate is found to be …

Ignition Of A Large Volume Plasma With A Plasma Jet, M. Laroussi, M. A. Akman

Electrical & Computer Engineering Faculty Publications

Here we report on a method to generate a long plasma plume and to ignite a large volume plasma by means of the jet. The plasma plume is generated by our tube reactor and then introduced into a chamber where the pressure is controlled. We discovered there are three operating phases:Aphasewhere the plume length remains approximately constant, followed by a second phase where the jet increases in length as the pressure decreases. Then at pressures below 70 Torr a mode transition occurs where the plume length decreases and the plasma expands until the entire chamber is filled.

Doping Dependence Of Electronic And Mechanical Properties Of Gase1−XTeX And Ga1−XInXSe From First Principles, Zs. Rak, S. D. Mahanti, K. C. Mandal, N. C. Fernelius

Faculty Publications

No abstract provided.

Simulation Of Temperature Distributions In Tissue Upon Laser Pulse Irradiation Including Water Mass Transfer, Deepthi Nagulapally

Electrical & Computer Engineering Theses & Dissertations

Lasers, due to their unique characteristics, have tremendous applications in the medical field. Generally all laser applications in hie-medicine involve the propagation of laser energy through tissue. Energy is deposited giving rise to many physical, hie-chemical, and mechanical effects. Among these are dynamical changes in the local temperature distributions within the tissue. Analysis of the temperature changes requires the creation of an appropriate optical transmission and heat flow model that incorporates user specified laser parameters. Here, a numerical simulation model was developed to study both steady state and time dependent temperature distributions due to pulsed laser radiation within user specified …

Finite Element Analysis Of Ring-Shaped Emission Profile In Plasma Bullet, Yukinori Sakiyama, David B. Graves, Julien Jarrige, Mounir Laroussi

Electrical & Computer Engineering Faculty Publications

Using a one-way coupled model of neutral gas flow and plasma dynamics we report a mechanism to explain the ring-shaped emission pattern that has been observed experimentally in plasma bullets at atmospheric pressure. We solve a fluid model with the local field approximation in one-dimensional cylindrical coordinates, corresponding to a cross-section of a plasma bullet. Pulselike uniform electric field is assumed to be applied perpendicular to the simulation domain. Time and spatially resolved spectroscopic measurements support the simulation results.

Electron Multipactor: Theory Review, Comparison And Modeling Of Mitigation Techniques In Icepic, Neil G. Rogers

Theses and Dissertations

Mitigation approaches for single surface multipactor at dielectric windows are investigated using Particle-In-Cell (PIC) simulations. Initially baseline susceptibility diagrams are constructed analytically and compared with self-consistent, dynamic system trajectories. The power deposited on the surface of a dielectric window in an HPM system is considered using three different methods and the results of PIC simulations. Geometric mitigation is then considered by varying the window orientation with respect to the HPM electric held. Small angular deviations, less than 20 degrees, from the nominal case of normal incidence show dramatic changes in the susceptibility diagram. A materials approach to mitigation is then …

The Effect Of Copt Crystallinity And Grain Texturing On Properties Of Exchange-Coupled Fe/Copt Systems, H. Oguchi, A. Zambano, M. Yu, Jason R. Hattrick-Simpers, D. Banerjee, Y. Liu, Z. L. Wang, J. P. Liu, S. E. Lofland, D. Josell, I. Takeuchi

Faculty Publications

The effect of the crystallinity and the grain texturing of CoPt hard layers on exchange coupled Fe/CoPt soft/hard magnetic systems was studied using gradient thickness multilayer thin films. We have studied the hard layer structures by transmission electron microscopy and x-ray diffraction, and characterized the exchange coupling interaction through magnetization loops obtained by the magneto-optical Kerr effect measurement. We found that exchange coupling strongly depends on the crystalline characteristics of the CoPt hard layer. There is correlation between the mixture of different grain orientations of the CoPt hard layer and coupling efficiency. In particular, interlayer coupling is enhanced when there …

Biomarker Identification For Prostate Cancer Using An Efficient Feature Selection Algorithm, Vamsi Krishnam Raju Mantena

Electrical & Computer Engineering Theses & Dissertations

In recent years, there has been an increased interest in using protein mass spectrometry to identify biomarkers that discriminate diseased from healthy individuals. A biomarker is a characteristic that is objectively measured and evaluated as an indicator of normal biological processes, pathological processes, or pharmacological responses to a therapeutic intervention. Identifying biomarkers will be an important step towards disease characterization and patient management. One challenge of biomarker identification is how to handle the high dimensional mass spectral data. In this thesis, we applied an efficient feature selection algorithm to mass spectrometry data obtained from prostate tissue samples to identify prostate …