Engineering Physics Commons^™

Synthesis And Characterization Of Carbon Quantum Dots And Gold Nanoparticles For Norovirus Biosensing Applications In Water Systems, Breanne Evans

Master's Theses

Rapid, reliable detection of viral pathogens remains a significant challenge across water-treatment and environmental monitoring systems, including drinking-water, wastewater, water reuse, and environmental surveillance applications. Waterborne viral contamination can pose substantial public-health risks, making early detection essential for protecting water quality and responding quickly to treatment failures or contamination events. Direct potable reuse (DPR) is one particularly demanding example because it requires continuous verification of treatment performance and the broader need for rapid virus monitoring extends across many water-treatment and environmental surveillance applications. Norovirus is a priority target because of its widespread occurrence in wastewater, environmental persistence, and exceptionally low …

Designing Enhanced Nonlinearity In Plasmonic Devices With Epsilon-Near-Zero Films, Kevin Tran Le

Electrical Engineering and Computer Science (MS) Theses

The growing demand for energy-efficient optical information processing motivates compact nonlinear photonic devices that can operate at low power. Silicon photonics is a mature platform for linear optical functions, but nonlinear operation remains challenging because of its weak Kerr response, two-photon absorption at telecommunication wavelengths, and limited compatibility with deeply subwavelength plasmonic confinement. This thesis computationally investigates epsilon-near-zero thin films integrated into plasmonic waveguide architectures as a route toward stronger light–matter interaction in compact nonlinear devices.

Two waveguide geometries are examined: a hybrid metal-insulator-metal plasmonic slab waveguide incorporating an ultrathin indium tin oxide epsilon-near-zero layer (5–50 nm), and a dielectric-loaded …

Developing A Workforce To Build A Star On Earth, Vola Andrianarijaona, Angelina Castillo, Sean Walters

Campus Research Month

This study is meant to help understand why fusion has remained "30 years away" for decades and why that may finally be changing.We see nuclear fusion not merely as a physics phenomenon, but as a complex engineering challenge requiring coordination across different disciplines, including physics, materials science, electrical and mechanical engineering, systems engineering, robotics, and computer science, etc. Indeed, nuclear fusion is not just about "making atoms fuse"—it's about controlling, powering, measuring, and stabilizing one of the most extreme environments humans have ever built. Advances in superconducting magnets, new materials are bringing fusion closer to reality than ever before, and …

Self Spin-Orbit Torques, Ryan Greening

Electronic Theses and Dissertations

Spin–Orbit torques (SOTs) provide an energy-efficient pathway to control magnetization in nanoscale heterostructures. Recently, spin-orbit coupling within ferromagnets has been shown to generate self spin-orbit torques (SSOTs) on the magnetization itself. Previous work on self spin-orbit torques relies on thick ferromagnets with complicated film structures with chemical disorder or compositional gradients to generate inversion symmetry breaking. This dissertation advances experimental methodology and presents data on the quantification of self spin-orbit torques in magnetic thin films due to the spin-orbit coupling of standard 3d ferromagnets.

First, I develop an oblique-incidence magneto-optical Kerr effect (MOKE) technique that exploits a mirror-assisted double reflection …

Enhanced Crack Resistance Of Porous Anodic Aluminum Oxide Grown On A Tubular Substrate With The Additive Ethylene Glycol, Manogari Sianturi, Ariadne Laksmidevi Juwono, Anawati Anawati

Makara Journal of Science

The growth of a porous anodic aluminum oxide (PAAO) layer with fewer cracks on a tubular substrate is quite challenging. The PAAO layer on a curved surface grows slower than that on a flat surface and is susceptible to cracking. This study aims to improve the crack resistance of the PAAO layer grown on a tubular aluminum substrate by adding ethylene glycol (EG). Each bath contained additive concentrations of 0, 5, 10, and 15 vol% EG. Anodization proceeded for 4 h at a temperature of 10 ℃ using the potentiostatic mode at 25 V in a sulfuric acid bath and …

Silver-Alloyed Cigs Thin-Film Solar Cells On Flexible Stainless-Steel Substrate, Zhi Huang

Dissertations, Theses, and Capstone Projects

Our dissertation demonstrates the optimization of ACIGS (Ag-Cu-In-Ga-Se) thin-film solar cells, achieving an efficiency of 20.4% through the combined effects of silver incorporation and alkali metal post-deposition treatment (PDT). The incorporation of 2.8% Ag into the CIGS lattice enhanced crystal quality, reduced disorder, and widened the bandgap by 0.103 eV, as evidenced by a significant reduction in Urbach energy. These improvements resulted in stronger light absorption, increased carrier generation, and enhanced photovoltaic parameters, including a short-circuit current density Jsc of 35.31 mA/cm², an open-circuit voltage Voc of 0.74 V, and a fill factor (FF) of 75.8%. PDT using rubidium fluoride …

Effect Of Reduction Annealing On The Structural And Electrical Properties Of Α-Moo3 Thin Films, Sandipani Ghosh

Graduate Theses/Dissertations

2D layered molybdenum oxide has attracted significant research interest due to its tuneable bandgap and diverse structural, chemical, electrical, and optical properties influenced by growth parameters and synthesis techniques. In this study, the effects of reduction annealing on the structural and electrical properties of few-layer MoO₃ thin films, deposited on Si/SiO₂ substrates via pulsed laser deposition, were investigated. X-ray diffraction revealed nanocrystalline structures with a preferred (020) orientation, reduction annealing produced highly crystalline orthorhombic α-MoO₃ with reduced unit cell volume. FESEM/EDS provided detailed analyses of microstructures and elemental compositions. Raman spectroscopy confirmed the orthorhombic structure, with characteristic peaks at 667, …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Characterizing 2d Materials Using Positron Impact Induced Electron Spectroscopy And Development Of A Novel Thin Film Zno Based Piezo-Photonic Detector For Cryogenic And Mems Applications, Pratyanik Sau

2024 Fall Honors Capstone Projects - Archive

Surface analytical techniques are essential for engineering nano-detectors allowing characterization of their chemical composition, electromechanical properties, and physical structure. In the first chapter, the positron impact-induced secondary electron (PIISE) energy spectra and yield from single-layer graphene (SLG) and multi-layer graphene (MLG) grown on a polycrystalline Cu substrate have been presented. In the second chapter, an extensive catalog of Positron Induced Auger Spectra is presented to aid in the analysis of elemental composition of various materials. Additionally, in the third chapter, a novel detection scheme utilizing the piezo-pyroelectric properties of Zinc Oxide (ZnO) thin films have been demonstrated for its application …

Synthesis And Characterization Of A Zirconium (Zr) Thin Film On Si(100) Via Pulsed Laser Deposition, Zikrulloh Khuzhakulov

Masters Theses & Specialist Projects

This study investigates the synthesis and characterization of zirconium (Zr) thin films deposited on Si(100) substrates using pulsed laser deposition (PLD). The effects of two laser wavelengths (1064 nm and 532 nm), various substrate temperatures (25 °C, 300 °C, and 500 °C), and different laser fluences (0.25, 0.5, 1.0 J/cm²) on the properties of the Zr films were examined. Results indicated that smoother films were achieved with the 1064 nm wavelength, while surface roughness increased with higher fluences. Optimal crystalline films were obtained at a substrate temperature of 300 °C for both wavelengths. X-ray diffraction (XRD), scanning electron microscopy (SEM), …

Twist-Assisted All-Antiferromagnetic Tunnel Junction In The Atomic Limit, Yullang Chen, Kartik Samanta, Naafls A. Shahed, Haojle Zhang, Chi Fang, Arthur Ernst, Evgeny Y. Tsymbal, Stuart S.P. Parkin

Nebraska Center for Materials and Nanoscience: Faculty Publications

Antiferromagnetic spintronics^1,2 shows great potential for high-density and ultrafast information devices. Magnetic tunnel junctions (MTJs), a key spintronic memory component that are typically formed from ferromagnetic materials, have seen rapid developments very recently using antiferromagnetic materials3,4. Here we demonstrate a twisting strategy for constructing all-antiferromagnetic tunnel junctions down to the atomic limit. By twisting two bilayers of CrSBr, a 2D antiferromagnet (AFM), a more than 700% nonvolatile tunnelling magnetoresistance (TMR) ratio is shown at zero field (ZF) with the entire twisted stack acting as the tunnel barrier. This is determined by twisting two CrSBr monolayers for which the TMR …

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

Gate-Controlled Supercurrent Effect In Dry-Etched Dayem Bridges Of Non-Centrosymmetric Niobium Rhenium, Jennifer Koch, Carla Cirillo, Sebastiano Battisti, Leon Ruf, Zahra Makhdoumi Kakhaki, Alessandro Paghi, Armen Gulian, Serafim Teknowijoyo, Giorgio De Simoni, Francesco Giazotto, Carmine Attanasio, Elke Scheer, Angelo Di Bernardo

Mathematics, Physics, and Computer Science Faculty Articles and Research

The application of a gate voltage to control the superconducting current flowing through a nanoscale superconducting constriction, named as gate-controlled supercurrent (GCS), has raised great interest for fundamental and technological reasons. To gain a deeper understanding of this effect and develop superconducting technologies based on it, the material and physical parameters crucial for the GCS effect must be identified. Top-down fabrication protocols should also be optimized to increase device scalability, although studies suggest that top-down fabricated devices are more resilient to show a GCS. Here, we investigate gated superconducting nanobridges made with a top-down fabrication process from thin films of …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Photoluminescence Of Beryllium-Related Defects In Gallium Nitride, Mykhailo Vorobiov, Mykhailo Vorobiov

Theses and Dissertations

This study explores the potential of beryllium (Be) as an alternative dopant to magnesium (Mg) for achieving higher hole concentrations in gallium nitride (GaN). Despite Mg prominence as an acceptor in optoelectronic and high-power devices, its deep acceptor level at 0.22 eV above the valence band limits its effectiveness. By examining Be, this research aims to pave the way to overcoming these limitations and extend the findings to aluminum nitride and aluminum gallium nitride (AlGaN) alloy. Key contributions of this work include. i)Identification of three Be-related luminescence bands in GaN through photoluminescence spectroscopy, improving the understanding needed for further material …

Effect Of Annealing On Photoluminescence From Defects In Gan, Oleksandr Andrieiev

Theses and Dissertations

Annealing is a critical process in modern GaN technology, essential for achieving p-type conductivity by activating the Mg_Ga acceptor, as first demonstrated by Shuji Nakamura in the early 1990s. Despite the omnipresence of hydrogen as an impurity in GaN crystals, the precise mechanisms governing hydrogen diffusion and acceptor passivation remain only partially understood. The presented research investigates the effects of annealing-induced activation and hydrogen passivation on C and Be acceptors in GaN grown by MOCVD, HVPE, and MBE methods. We explored these effects by using several annealing techniques, gas compositions, and thermal regimes. A transient behavior between the C …

Ferroelectric Hafnia Surface In Action, Xia Hong

Nebraska Center for Materials and Nanoscience: Faculty Publications

Piezoresponse microscopy and spectroscopy reveal the inextricable role of surface electrochemistry in stabilizing and controlling ferroelectricity in doped hafnia.

Doped hafnia (HfO₂), a relatively new member of the ferroelectric family, has challenged in many ways our conventional perception of ferroelectric oxides. It possesses extremely localized electric dipoles that are independently switchable,¹ making it immune to finite size effects — the loss of long-range dipole order in ferroic materials due to size scaling. While polycrystalline grains and microstructures can yield lower polarization and poorer cycling behavior in canonical ferroelectrics such as Pb(Zr,Ti)O₃ and BaTiO₃, in …

Effective Nanomembranes From Chitosan/Pva Blend Decorated Graphene Oxide With Gum Rosin And Silver Nanoparticles For Removal Of Heavy Metals And Microbes From Water Resources, Mohamed Morsy

Nanotechnology Research Centre

No abstract provided.

Domain Wall Saddle Point Morphology In Ferroelectric Triglycine Sulfate, C. J. Mccluskey, A. Kumar, Alexei Gruverman, I. Luk’Yanchuk, J. M. Gregg

Alexei Gruverman Publications

Ferroelectric domain walls, across which there is a divergence in polarization, usually have enhanced electrical conductivity relative to bulk. However, in lead germanate, head-to-head and tail-to-tail walls are electrically insulating. Recent studies have shown that this is because, when oppositely oriented domains meet, polar divergence is obviated by a combination of domain bifurcation and suspected local dipolar rotation. To explore the uniqueness, or otherwise, of this microstructure, we have used tomographic piezoresponse force microscopy to map three-dimensional domain morphologies in another uniaxial ferroelectric system: triglycine sulfate. This mapping reveals an abundance of domain wall saddle points, which are characteristic of …

Entropy-Driven Structural Transition From Tetragonal To Cubic Phase: High Thermoelectric Performance Of Cucdinse3 Compound, Tingting Luo, Yihao Hu, Shi Liu, Fanjie Xia, Junhao Qiu, Haoyang Peng, Keke Liu, Quansheng Guo, Xingzhong Li, Dongwang Yang, Xianli Su, Jinsong Wu, Xinfeng Tang

Nebraska Center for Materials and Nanoscience: Faculty Publications

Cu based chalcopyrite is an important class of thermoelectric materials with excellent electronic properties, however, the thermal conductivity is relatively high due to the simple tetragonal structure with highly ordered configuration on cation sites, limiting the thermoelectric performance. Herein, we realize that the modulation of entropy via alloying CdSe achieves the structural transition from tetragonal structure with ordered configuration on cations sites in CuInSe₂ compound to cubic CuCdInSe₃. CuCdInSe₃ crystallizes in a zinc blende (ZnS) structure where Cu, Cd and In cations randomly occupy the Zn site with the occupancy fraction 1/3. This entropy driven order-disorder …

New Features In Landyne 5 - A Software Suite For Materials Characterization And Crystallography By Transmission Electron Microscopy, Xing-Zhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

Landyne software suite (version 5) includes fifteen standalone computer programs for materials characterization and crystallography by transmission electron microscopy [1]. A launcher interface is provided for users to access all components conveniently. The purpose of this software suite is twofold: i) as research tools to analyze experimental results, ii) as teaching tools to explore the varieties of electron diffraction methods and crystallographic image processing principles.

The Landyne suite previously included: PTable, an interactive periodic table of elements; SVAT, a structural visual and analytical tool; SAED and PCED, simulation and analysis of electron diffraction (spot and ring) patterns; QSAED and QPCED, …

Structural, Electronic, And Magnetic Properties Of Cofevge-Based Compounds: Experiment And Theory, Parashu Kharel, Zachary Lehmann, Gavin Baker, Lukas Stuelke, Shah R. Valloppilly, Paul M. Shand, Pavel V. Lukashev

Nebraska Center for Materials and Nanoscience: Faculty Publications

We have carried out a combined theoretical and experimental investigation of both stoichiometric and nonstoichiometric CoFeVGe alloys. In particular, we have investigated CoFeVGe, Co_1.25Fe_0.75VGe, Co_0.75Fe_1.25VGe, and CoFe_0.75VGe bulk alloys. Our first principles calculations suggest that all four alloys show ferromagnetic order, where CoFeVGe, Co_1.25Fe_0.75VGe, and Co_0.75Fe_1.25VGe are highly spin polarized with spin polarization values of over 80%. However, the spin polarization value of CoFe_0.75VGe is only about 60%. We have synthesized all four samples using arc melting and high-vacuum annealing …

Tem Studies Of A New Modulated Structure In Mn2Rusn Alloy And Intermetallic Phases In Fe3+XCo3–XTi2 (X = 0, 1, 2, 3) Alloys, Xing-Zhong Li, Shah R. Valloppilly

Nebraska Center for Materials and Nanoscience: Faculty Publications

Heusler compounds are a remarkable class of intermetallic materials with wide-ranging and tunable properties. The Mn₂RuSn Heusler compound was reported as an L2₁B-type cubic phase, a = 0.62195 nm, distinguishing from the original L2₁ structure (or L2₁A-type). The L2₁B-type structure is a disordered variant of the inverse Heusler structure, XA-type (Prototype-CuHg₂Ti, space group No. 216, F4–3m).

In our recent work [1], we observed a new modulated structure derived from the XA-type structure and its orthogonal domains in the Mn₂RuSn Heusler alloy. The structural characterization was carried out …

An Interactive Simulation And Visualization Tool For Conventional And Aberration-Corrected Transmission Electron Microscopy, Xingzhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

Contrast transfer function (CTF) is a vital function in transmission electron microscopy (TEM). It expresses to what extent amplitudes converted from the phase changes of the diffracted waves contribute to the TEM image, including the effects of lens aberrations. Simulation is very helpful to understand the application of the function thoroughly. In this work, we develop the CTFscope as a component in the Landyne software suite, to calculate the CTF with temporal and spatial dumping envelopes for conventional TEM and to extend it to various aberrations (up to fifth order) for aberration-corrected (AC)- TEM. It also includes effects on the …

Topological Shadow Of Higher-Order Topological Phases And Non-Hermitian Phases Protected By Generalized Rotational Symmetry, Kai Chen

Dissertations, Theses, and Capstone Projects

Topological phenomena in condensed matter physics have been investigated intensively in the past decades since the discovery of the integer quantum Hall effect (IQHE). For the IQHE, the energy band can be characterized by its topological invariants (Chern number or TKNN invariant), which relates to the quantized Hall conductance directly. Later, this expression was recognized as the first Chern class of a U(1) principal fiber bundle on a torus, where the fibers and torus correspond respectively to the magnetic Bloch waves and the magnetic Brillouin zone. And then, the discoveries of time-reversal symmetric topological insulators in two and three dimensions …

Study Of Thermoelectric And Lattice Dynamics Properties Of 2d Layered Mx (M = Sn, Pb; X = S, Se, Te) And Zrs2 Compounds Using First-Principles Approach, Abhiyan Pandit

Graduate Theses and Dissertations

The aim of this dissertation is the investigation of thermoelectric and lattice dynamics properties of two-dimensional (2D) MX (M = Sn, Pb; X = S, Se, Te) and ZrS2 compounds based on the first-principles density functional theory. The dimensionality reduction (e.g., using 2D structure) of bulk materials is found to have enhanced thermoelectric efficiency. This enhancement is attributed to the increase of the Seebeck coefficient as a result of higher electronic density of states near the Fermi level in low-dimensional materials. In addition, lowering the dimensionality increases phonon scattering near interfaces and surfaces in 2D materials, which leads to a …

Ultra-High Carrier Mobilities In Ferroelectric Domain Wall Corbino Cones At Room Temperature, Conor J. Mccluskey, Matthew G. Colbear, James P.V. Mcconville, Shane J. Mccartan, Jesi R. Maguire, Michele Conroy, Kalani Moore, Alan Harvey, Felix Trier, Ursel Bangert, Alexei Gruverman, Manuel Bibes, Amit Kumar, Raymong G.P. Mcquaid, J. Marty Gregg

Alexei Gruverman Publications

Recently, electrically conducting heterointerfaces between dissimilar band-insulators (such as lanthanum aluminate and strontium titanate) have attracted considerable research interest. Charge transport has been thoroughly explored and fundamental aspects of conduction firmly established. Perhaps surprisingly, similar insights into conceptually much simpler conducting homointerfaces, such as the domain walls that separate regions of different orientations of electrical polarisation within the same ferroelectric band-insulator, are not nearly so well-developed. Addressing this disparity, we herein report magnetoresistance in approximately conical 180° charged domain walls, which occur in partially switched ferroelectric thin film single crystal lithium niobate. This system is ideal for such measurements: firstly, …

Controlling Magnetic Exchange And Anisotropy By Nonmagnetic Ligand Substitution In Layered M P X 3 ( M = Ni , Mn; X = S , Se), Rabindra Basnet, Kamila M. Kotur, Milosz Rybak, Cory Stephenson, Samuel Bishop, Carmine Autieri, Magdalena Birowska, Jin Hu

Physics Faculty Publications and Presentations

Recent discoveries in two-dimensional magnetism have intensified the investigation of van der Waals magnetic materials and further improved our ability to tune their magnetic properties. Tunable magnetism has been widely studied in antiferromagnetic metal thiophosphates MPX3. Substitution of metal ions M has been adopted as an important technique to engineer the magnetism in MPX3. In this work, we have studied the previously unexplored chalcogen X substitutions in MPX3 (M=Mn/Ni; X=S/Se). We synthesized the single crystals of MnPS3−xSex (0≤x≤3) and NiPS3−xSex (0≤x≤1.3) and investigated the systematic evolution of the magnetism with varying x. Our study reveals the effective tuning of magnetic …

A Modulated Structure Derived From The Xa-Type Mn2Rusn Heusler Compound, Xingzhong Li, Wen-Yong Zhang, Ralph Skomski, David J. Sellmyer

Nebraska Center for Materials and Nanoscience: Faculty Publications

A modulated structure derived from the inverse Heusler phase (the XA-type and the disordered variant L2₁B-type) has been observed in rapidly quenched Mn2RuSn ribbons. The powder X-ray diffraction pattern of the quenched ribbons can be indexed as an L2₁B-type structure. Electron diffraction patterns of the new structure mostly resemble those of the XA-type (and the disordered variant L2₁B-type) structure and additional reflections with denser spacing indicate a long periodicity. Orthogonal domains of the modulated structure were revealed by a selected-area electron diffraction pattern and the corresponding dark-field transmission electron microscopy images. The structure was …

Localization Effects And Anomalous Hall Conductivity In A Disordered 3d Ferromagnet, Paul M. Shand, Y. Moua, G. Baker, Shah R. Valloppilly, Pavel V. Lukashev, Parashu Kharel

Nebraska Center for Materials and Nanoscience: Faculty Publications

We have prepared the Heusler alloy CoFeV_0.5Mn_0.5Si in bulk form via arc melting. CoFeV_0.5Mn_0.5Si is ferromagnetic with a Curie temperature of 657 K. The longitudinal resistivity exhibits a minimum at 150 K, which is attributable to competition between quantum interference corrections at low temperatures and inelastic scattering at higher temperatures. The magnetoresistance (MR) is positive and nearly linear at low temperatures and becomes negative at temperatures close to room temperature. The positive MR in the quantum correction regime is evidence of the presence of the enhanced electron interaction as a contributor to …