Condensed Matter Physics Commons^™

Cubesat Space Environments Effects Studied In The Space Survivability Test Chamber, Jr Dennison, Gregory Wilson, Alex Souvall, Ben Russon, Katie Gamaunt

Posters

CubeSats are particularly susceptible to environmental-induced modifications, which can lead to deleterious or catastrophic consequences. This is increasingly important as small satellites—with minimal shielding due to reduced mass and size constraints and reliance on more compact and sensitive electronics—have longer mission lifetimes and make more diverse, complex and sensitive measurements. The current push to expand deployment of CubeSats beyond LEO, into even more demanding environments where modest relief due to shielding by the Earth’s magnetosphere is absent (such as polar or GEO orbits), can further exacerbate these problems.

Testing of small satellites is therefore critical to avoid such problems. A …

Photonicstd-2d: Modeling Light Scattering In Periodic Multilayer Photonic Structures, Alexey Bondarev, Shaimaa Azzam, Zhaxylyk Kudyshev, Alexander V. Kildishev

The Summer Undergraduate Research Fellowship (SURF) Symposium

Efficient modeling of electromagnetic processes in optical and plasmonic metamaterials is important for enabling new and exciting ways to manipulate light for advanced applications. In this work, we put together a tool for numerical simulation of propagation of normally incident light through a nanostructured multilayer composite material. The user builds a unit cell of a given material layer-by-layer starting from a substrate up to a superstrate, splitting each layer further into segments. The segments are defined by width and material -- dielectric, metal or active medium. Simulations are performed with the finite difference time domain (FDTD) method. A database of …

Classifying Pattern Formation In Materials Via Machine Learning, Lukasz Burzawa, Shuo Liu, Erica W. Carlson

The Summer Undergraduate Research Fellowship (SURF) Symposium

Scanning probe experiments such as scanning tunneling microscopy (STM) and atomic force microscopy (AFM) on strongly correlated materials often reveal complex pattern formation that occurs on multiple length scales. We have shown in two disparate correlated materials that the pattern formation is driven by proximity to a disorder-driven critical point. We developed new analysis concepts and techniques that relate the observed pattern formation to critical exponents by analyzing the geometry and statistics of clusters observed in these experiments and converting that information into critical exponents. Machine learning algorithms can be helpful correlating data from scanning probe experiments to theoretical models …

Hydrogel Microphones For Stealthy Underwater Listening, Yang Gao, Jingfeng Song, Shumin Li, Christian Elowsky, You Zhou, Stephen Ducharme, Yong Mei Chen, Qin Zhou, Li Tan

Stephen Ducharme Publications

Exploring the abundant resources in the ocean requires underwater acoustic detectors with a high-sensitivity reception of low-frequency sound from greater distances and zero reflections. Here we address both challenges by integrating an easily deformable network of metal nanoparticles in a hydrogel matrix for use as a cavity-free microphone. Since metal nanoparticles can be densely implanted as inclusions, and can even be arranged in coherent arrays, this microphone can detect static loads and air breezes from different angles, as well as underwater acoustic signals from 20 Hz to 3 kHz at amplitudes as low as 4 Pa. Unlike dielectric capacitors or …

Localization And Delocalization In Two-Dimensional Quantum Percolation, Brianna S. Dillon Thomas

Open Access Dissertations

Quantum percolation is one of several disorder-only models that address the question of whether conduction, or more generally, delocalization, is possible in two dimensional disordered systems. Whether quantum percolation exhibits a delocalization-localization phase transition in two dimensions is an ongoing debate, but many recent studies point toward there being a delocalized phase at non-zero disorder, in contradiction to the behavior of the Anderson model, another disorder-only model. In this dissertation, I present my research on quantum percolation that shows a delocalized state is possible, both on isotropic lattices and on highly anisotropic lattices, and shows that the essential characteristics of …

Probing Symmetry And Disorder Effects In The Fractional Quantum Hall States Of The Second Landau Level, Ethan I. Kleinbaum

Open Access Dissertations

Electrons confined to two dimensions, cooled to cryogenic temperatures, and placed in a strong perpendicular magnetic field exhibit a set of ground states referred to as the fractional quantum Hall states (FQHS). The FQHSs forming in the region called the second Landau level are some of the most exciting states as several theories predict that they are very different from the well understood FQHS in the lowest Landau level. Nonetheless, the nature of these FQHSs continue to evade understanding. In this thesis, a unique ultra-low temperature setup is used to examine the FQHSs of the second Landau level in regimes …

Metal Semiconductor Contact Between Gold And Boron Carbide, Ethiyal Raj Wilson, Elena Echeverria, Aiyun Liu, Bin Dong, George Peterson, Michael Nastasi, Peter A. Dowben

UCARE: Research Products

We have investigated the interaction of gold (Au) with the semiconductor boron carbide through X-ray photoemission and heterojunction diode fabrication. The plasma enhanced chemical vapor deposition (PECVD) hydrogenated semiconducting boron carbide films, deposited from closo-1,7-dicarbadodecaborane (metacarborane, m-B₁₀C₂H₁₂), shows a shift in the binding energies of the core level photoemission features when gold is deposited on the surface. The shifting of the B 1s level is smaller than for the C 1s level and the non-uniform nature of the shifts indicates a strong, complex and reversible gold chemical interaction with the surface, particularly with the …

Low-Dimensional Materials For Organic Electronic Applications, Sumit Beniwal

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

This thesis explores the self-assembly, surface interactions and electronic properties of functional molecules that have potential applications in electronics. Three classes of molecules - organic ferroelectric, spin-crossover complex, and molecules that assemble into a 2D semiconductor, have been studied through scanning tunneling microscopy and surfacesensitive spectroscopic methods. The scientific goal of this thesis is to understand the self-assembly of these molecules in low-dimensional (2D) configurations and the influence of substrate on their properties. First, a H-bonded organic ferroelectric, the 3-Hydroxyphenalenone, is studied on two noble metal substrates. It is demonstrated how a variety of different assemblies including 1D chains, p-p …

Materials Design And Band Gap Engineering Of Complex Nanostructures Using A Semi-Empirical Approach : Low Dimensional Boron Nanostructures, H-Bn Sheet With Graphene Domains And Holey Graphene., Cherno Baba Kah

Electronic Theses and Dissertations

This dissertation will explore the potential of a semi-empirical Hamiltonian, developed by the research group at the University of Louisville, in predicting the existence of new families of low-dimensional boron nanostructures based on icosahedral α-B₁₂ clusters, and in tuning the band gaps of h-BN sheets with graphene domains and holey graphene. This semi-empirical Hamiltonian models electron-electron and electron-ion interactions using environment-dependent (ED) functions, and ion-ion interactions via usual pairwise terms. Additional features of our approach are that it uses a linear combination of atomic orbitals (LCAO) framework to describe the Hamiltonian and it calculates the charge distribution around a …

Spica: Stereographic Projection For Interactive Crystallographic Analysis, Xingzhong Li

Nebraska Center for Materials and Nanoscience: Faculty Publications

In numerous research fields, especially the applications of electron and X-ray diffraction, stereographic projection represents a powerful tool for researchers. SPICA is a new computer program for stereographic projection in interactive crystallographic analysis, which inherits features from the previous JECP/SP and includes more functions for extensive crystallographic analysis. SPICA provides fully interactive options for users to plot stereograms of crystal directions and crystal planes, traces, and Kikuchi maps for an arbitrary crystal structure; it can be used to explore the orientation relationships between two crystalline phases with a composite stereogram; it is also used to predict the tilt angles of …

Preparation And Characterization Of Van Der Waals Heterostructures, Horacio Coy Diaz

USF Tampa Graduate Theses and Dissertations

In this dissertation different van der Waals heterostructures such as graphene-MoS₂ and MoTe₂-MoS₂ were prepared and characterized. In the first heterostructure, polycrystalline graphene was synthesized by chemical vapor deposition and transferred on top of MoS₂ single crystal. In the second heterostructure, MoTe₂ monolayers were deposited on MoS₂ by molecular beam epitaxy.

Characterization of graphene-MoS₂ heterostructures was conducted by spin and angle resolve spectroscopy which showed that the electronic structure of the bulk MoS₂ and graphene in this van der Waals heterostructures is modified. For MoS₂ underneath the graphene, a band …

Simultaneous Metal-Insulator And Antiferromagnetic Transitions In Orthorhombic Perovskite Iridate Sr0.94Ir0.78O2.68 Single Crystals, Hao Zheng, Jsaminka Terzic, Feng Ye, X. G. Wan, D. Wang, Jinchen Wang, Xiaoping Wang, P. Schlottmann, Shujuan Yuan, Gang Cao

Center for Advanced Materials Faculty Publications

The orthorhombic perovskite SrIrO₃ is a semimetal, an intriguing exception in iridates where the strong spin-orbit interaction coupled with electron correlations tends to impose an insulating state. We report results of our investigation of bulk single-crystal S_r0.94Ir_0.78O_2.68 or Ir-deficient, orthorhombic perovskite SrIrO₃. It retains the same crystal structure as stoichiometric SrIrO₃ but exhibits a sharp, simultaneous antiferromagnetic (AFM) and metal-insulator (MI) transition occurring in the basal-plane resistivity at 185 K. Above it, the basal-plane resistivity features an extended regime of almost linear temperature dependence up to 800 K but the strong …

Anisotropic Softening Of Magnetic Excitations In Lightly Electron-Doped Sr2Iro4, X. Liu, M. P. M. Dean, Z. Y. Meng, M. H. Upton, T. Qi, T. Gog, Y. Cao, J. Q. Lin, D. Meyers, H. Ding, Gang Cao, J. P. Hill

Center for Advanced Materials Faculty Publications

The magnetic excitations in electron-doped (Sr_1−xLa_x)₂IrO₄ with x = 0.03 were measured using resonant inelastic x-ray scattering at the Ir L₃ edge. Although much broadened, well defined dispersive magnetic excitations were observed. Comparing with the magnetic dispersion from the undoped compound, the evolution of the magnetic excitations upon doping is highly anisotropic. Along the antinodal direction, the dispersion is almost intact. On the other hand, the magnetic excitations along the nodal direction show significant softening. These results establish the presence of strong magnetic correlations in electron-doped (Sr_1−xLa_{x …}

Transport Of Dirac Electrons In A Random Magnetic Field In Topological Heterostructures, Hilary M. Hurst, Dimitry K. Efimkin, Victor Galitski

Faculty Research, Scholarly, and Creative Activity

We consider the proximity effect between Dirac states at the surface of a topological insulator and a ferromagnet with easy plane anisotropy, which is described by the XY model and undergoes a Berezinskii-Kosterlitz-Thouless (BKT) phase transition. The surface states of the topological insulator interacting with classical magnetic fluctuations of the ferromagnet can be mapped onto the problem of Dirac fermions in a random magnetic field. However, this analogy is only partial in the presence of electron-hole asymmetry or warping of the Dirac dispersion, which results in screening of magnetic fluctuations. Scattering at magnetic fluctuations influences the behavior of the surface …

Classical Transport In Disordered Systems, Antonios Papaioannou

Dissertations, Theses, and Capstone Projects

This thesis reports on the manifestation of structural disorder on molecular transport and it consists of two parts. Part I discusses the relations between classical transport and the underlying structural complexity of the system. Both types of molecular diffusion, namely Gaussian and non-Gaussian are presented and the relevant time regimes are discussed. In addition the concept of structural universality is introduced and connected with the diffusion metrics. One of the most robust techniques for measuring molecular mean square displacements is magnetic resonance. This method requires encoding and subsequently reading out after an experimentally controlled time, a phase ϕ to the …

Effect Of Electrolyte Concentration On The Capacitance And Mobility Of Graphene, Flint A. Martino

Senior Theses

The use of graphene field-effect transistors as a biosensor is increasingly being used to study biological phenomena, due to the sensitivity and low reactivity of graphene. To further improve sensitivity in biological environments, we examined how different salt concentrations affect the mobility of capacitance of the graphene. Samples were also measured after an annealing process. We report on the positive correlation between sensitivity and electrolyte concentration and speculate on methods to improve future detectors. Mobility of the device was found to change from 1.07*10³cm²/ (V*s) in de-ionized water to 2.78*10³cm²/ (V*s) in …

Modeling The Behavior Of The Graphene To Liquid Interfaces In An Electrolytic Liquid, Caitlin Duffner

Senior Theses

Understanding the mechanism for charge transfer between a graphene biosensor and its electrodes within an electrolyte solution is vital to better understand the sources of electrical noise in the system. By measuring the effective resistance and capacitance of the system at different frequencies, it is possible to develop a circuit model of the system's electrical behavior. This model provides a deeper understanding of the fundamental interactions that occur in a top-­gated graphene device and provides opportunities to improve a signal. To reduce noise created at the liquid to graphene interface, a buffer layer of Yttrium Oxide was applied. While the …

Pressure-Induced Confined Metal From The Mott Insulator Sr3Ir2O7, Yang Ding, Liuxiang Yang, Cheng-Chien Chen, Heung-Sik Kim, Myung Joon Han, Wei Luo, Zhenxing Feng, Mary Upton, Diego Casa, Jungho Kim, Thomas Gog, Zhidan Zeng, Gang Cao, Ho-Kwang Mao, Michel Van Veenendaal

Physics and Astronomy Faculty Publications

The spin-orbit Mott insulator Sr₃Ir₂O₇ provides a fascinating playground to explore insulator-metal transition driven by intertwined charge, spin, and lattice degrees of freedom. Here, we report high-pressure electric resistance and resonant inelastic x-ray scattering measurements on single-crystal Sr₃Ir₂O₇ up to 63–65 GPa at 300 K. The material becomes a confined metal at 59.5 GPa, showing metallicity in the ab plane but an insulating behavior along the c axis. Such an unusual phenomenon resembles the strange metal phase in cuprate superconductors. Since there is no sign of the collapse of spin-orbit …

Reflective Efficiencies Of Materials For Applications Of Bifacial Solar Cells, Michael Metter

Senior Theses

The bifacial solar cell is superior to its monofacial predecessor due to its ability to convert both incident light on top and reflected light from below into energy. The scattering of the reflected light is affected by the property of the material on which it is interacting. To date, little work has been contributed to studying the properties of these materials to determine optimal quantities for bifacial solar cells. In the first experiment, reflective efficiencies compared to the angle of reflection were explored for different grit of sandpaper in order to develop an understanding of how surface texture impacts reflectivity. …

Searching To Distinguish Defects And The Presence Of Negative Capacitance, Thaddeus Cox

Senior Theses

In the search for solar cells with lower manufacturing costs, thin film technology was developed. These thin films are only micrometers thick and are grown at relatively low temperatures, resulting in films with imperfections known as defects. Defects can cause thin film solar cells to have lower efficiencies than their single crystalline counterparts. In order to create more efficient thin film solar cells the physical mechanisms behind defects need to be investigated by sensitive techniques. Capacitance measurements of solar cells detect minute changes in charge in the material. For that reason, capacitance is used to electrically characterize the solar cell. …

Ferromagnetic Resonance Studies Of Coupled Magnetic Systems, Daniel J. Adams

LSU New Orleans Theses and Dissertations

The high-frequency properties of coupled magnetic systems have been investigated using vector network analyzer ferromagnetic resonance (VNA-FMR) spectroscopy. SAF structures consist of two ferromagnetic layers separated by a non-magnetic spacer, coupled through the indirect exchange interaction. The ferromagnetic layers of our samples were composed of FeCoB separated by a layer of Ru. The thickness of Ru was varied in the range of 8 to 18 Å among the samples studied. Antiferromagnetic coupling can be quickly identified by the major hysteresis loop (MHL).

A new way of displaying FMR data for these trilayer samples is presented which completely preserves the anisotropy …

Instrumentation Enhancements For Electron Yield Measurements Of Extremely Low-Conductivity High-Yield Dielectrics, Justin Christensen, Gregory Wilson, Jr Dennison

Presentations

Electron yield, a material dependent property which describes how it will charge under incident electron irradiation of a given energy, is defined as the number of electrons emitted from a material per incident electron. While very important for spacecraft charging modelling, the measurement of electron yield for insulating materials is very challenging because insulators quickly charge up under electron irradiation, thereby modifying the yield measurements.

Improved techniques have been implemented to reduce charging with each yield measurement, as well as to neutralize acquired charge between measurements. The goal is to determine the “intrinsic yield” (yield of uncharged insulator). New analysis …

Instrumentation Enhancements For Electron Yield Measurements Of Extremely Low-Conductivity High-Yield Dielectrics, Justin Christensen, Gregory Wilson, Jr Dennison

Conference Proceedings

Electron yield, a material dependent property which describes how it will charge under incident electron irradiation of a given energy, is defined as the number of electrons emitted from a material per incident electron. While very important for spacecraft charging modelling, the measurement of electron yield for insulating materials is very challenging because insulators quickly charge up under electron irradiation, thereby modifying the yield measurements.

Improved techniques have been implemented to reduce charging with each yield measurement, as well as to neutralize acquired charge between measurements. The goal is to determine the “intrinsic yield” (yield of uncharged insulator). New analysis …

Giant Enhancement Of Magnetic Anisotropy In Ultrathin Manganite Films Via Nanoscale 1d Periodic Depth Modulation, Anil Rajapitamahuni, L. Zhang, Mark A. Koten, V. R. Singh, John D. Burton, Evgeny Y. Tsymbal, Jeffrey E. Shield, Xia Hong

Evgeny Tsymbal Publications

The relatively low magnetocrystalline anisotropy (MCA) in strongly correlated manganites (La,Sr)MnO₃ has been a major hurdle for implementing them in spintronic applications. Here we report an unusual, giant enhancement of in-plane MCA in 6 nm La_0.67Sr_0.33MnO₃ (LSMO) films grown on (001) SrTiO₃ substrates when the top 2 nm is patterned into periodic stripes of 100 or 200 nm width. Planar Hall effect measurements reveal an emergent uniaxial anisotropy superimposed on one of the original biaxial easy axes for unpatterned LSMO along (110) directions, with a 50-fold enhanced anisotropy energy density of 5.6 × …

Energy Transfer And Localization In Molecular Crystals, Mitchell A. Wood

Open Access Dissertations

With the aim of developing new technologies for the detection and defeat of energetic materials, this collection of work was focused on using simulations to characterize materials at extremes of temperature, pressure and radiation. Each branch of the work here is collected by which material response is potentially used as the detectable signal.

Where the chemical response is of interest, this work will explore the possibility of non-statistical chemical reactions in condensed-phase energetic materials via reactive molecular dynamics (MD) simulations. We characterize the response of three unique high energy density molecular crystals to different means of energy input: electric fields …

Impedance Spectroscopy Studies Of Yttria Stabilized Zirconia Under Extreme Conditions, Quinlan Blaine Smith

UNLV Theses, Dissertations, Professional Papers, and Capstones

Yttria Stabilized Zirconia (YSZ) is of interest for many industries. Varying amounts of Yttria (Y2O3) can be doped into Zirconia (ZrO2) to create materials with specific characteristics. For instance, 3mol% YSZ (3YSZ) is known to be a super hard material and is used as a coating on drill tips and as an abrasive. Eight mol% YSZ (8YSZ) is commonly used as a solid electrolyte in Solid Oxide Fuel Cells because of its good ionic conducting abilities and stability at high temperatures. In this thesis project, a novel experimental setup was created and used to study the ionic conductivity of (3 …

High-Pressure Properties Of Several Narrow Bandgap Semiconductors From First-Principles Calculations, Andrew Michael Alvarado

UNLV Theses, Dissertations, Professional Papers, and Capstones

The electronic, thermodynamic, and structural properties of three semiconducting materials, ZnO, InN, and PbS, at high pressure are investigated utilizing first-principles calculations based on density function theory. The first two systems, ZnO and InN, crystalize as hexagonal structures at ambient conditions and transition to a cubic structure at higher pressures. The last system, PbS, is cubic at ambient conditions, but transitions to an orthorhombic structure at higher pressure. At ambient conditions, these materials are well known semiconductors with vast amount of research and a variety of wide ranging applications in electrical devices. However, there is a lack of understanding of …

Charge Collection Kinetics On Ferroelectric Polymer Surface Using Charge Gradient Microscopy, Yoon-Young Choi, Sheng Tong, Stephen Ducharme, Andreas Roelofs, Seungbum Hong

Stephen Ducharme Publications

A charge gradient microscopy (CGM) probe was used to collect surface screening charges on poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] thin films. These charges are naturally formed on unscreened ferroelectric domains in ambient condition. The CGM data were used to map the local electric current originating from the collected surface charges on the poled ferroelectric domains in the P(VDF-TrFE) thin films. Both the direction and amount of the collected current were controlled by changing the polarity and area of the poled domains. The endurance of charge collection by rubbing the CGM tip on the polymer film was limited to 20 scan cycles, after …

Synthesis, Characterization, And Electronic Properties Of Novel 2d Materials : Transition Metal Dichalcogenides And Phosphorene., George Anderson

Electronic Theses and Dissertations

Scaling electronic devices has become paramount. The current work builds upon scaling efforts by developing novel synthesis methods and next generation sensing devices based on 2D materials. A new combination method utilizing thermal evaporation and chemical vapor deposition was developed and analyzed to show the possibilities of Transition Metal Dichalcogenide monolayers and heterostructures. The materials produced from the above process showed high degrees of compositional control in both spatial dimensions and chemical structure. Characterization shows controlled fabrication of heterostructures, which may pave the way for future band gap engineering possibilities. In addition, Phosphorene based field effect transistors, photodetectors, and gas …

Thermal Analysis Of Borosilicate Glass For Its Biological Applications, Gregory Humble

Symposium of Student Scholars

Borosilicate glass doped with varying wt% of cerium oxide is investigated for biological applications. Thermal studies of each formulation were conducted using an SDT Q600 differential scanning calorimeter. 30mg samples of 350 - 425 μm particle size of each type of glass were heated to 1200°C in order to obtain the glass transition, crystallization, and melting temperatures. Samples were then heated to 900°C at several heating rates, ranging from 2°C/min to 100°C/min, then compared against each other as well as against an undoped borosilicate glass.