Condensed Matter Physics Commons^™

Effect Of Niobium Dopant On Zno Thin Films Prepared Via The Sol–Gel Spin Coating Method, Kevin Alvin Eswar, Nur Fairuz Rostan, Maryam Mohamad, Rabiatuladawiyah Md Akhir, Rosfayanti Rasmidi, Muliyadi Guliling, Najwa Ezira Azhar, Irmaizatussyehdany Buniyamin, Mohd Firdaus Malek, Mohamad Rusop Mahmood, Husairi Fadzilah Suhaimi, Saifollah Abdullah

Makara Journal of Science

Thin films of zinc oxide (ZnO) and niobium (Nb)-doped ZnO were deposited on a glass substrate using the sol–gel spin coating method. Diethanolamine, isopropyl alcohol, and zinc acetate served as the stabilizers, solvent, and starting ma-terial, respectively. Niobium pentachloride was employed as the dopant source. Energy-dispersive X-ray analysis con-firmed Nb incorporation. Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), and ultravio-let–visible spectroscopy (UV–Vis) analyses characterized the morphology, structure, and optics of the films, respective-ly. Both films, comprising nanoparticles, were visible in FESEM. Nb doping reduced the particle size from 44.2 nm to 35.8 nm. The XRD peaks at 31.23°, …

Fabrication Of Microscale Oxide Architectures On Silicon Via A Cmos-Compatible, Deposition-Last Process, Jamal A. Brown

Material Science and Engineering Theses - Archive

This work explores the feasibility of integrating complex oxide devices on silicon using a CMOS-compatible, deposition-last approach. While previous demonstrations of this method have succeeded at larger scales, this study focuses on extending the process to microscale features, with lateral dimensions as small as two microns. The fabrication sequence begins with photolithographic patterning and reactive ion etching of the silicon substrate, followed by the deposition of a silicon nitride mask to delineate device regions. We then epitaxially grew SrTiO3 and La-doped SrTiO3 layers on top of the nitride mask via molecular beam epitaxy. Electrical transport measurements of the La:STO layer …

Beyond The Phonon Gas Model (Pgm): Unraveling The Unique Mechanistic Processes Dictating Thermal Transport In Highly Anharmonic And Disordered Materials, Sandip Thakur

Open Access Dissertations

Thermal transport in nonmetallic solids has traditionally been described by the phonon gas model (PGM), in which heat is carried by weakly interacting phonon quasiparticles in an ordered crystalline lattice. However, this model breaks down in materials characterized by strong anharmonicity, dynamic disorder, or structural complexity, features prevalent in many next-generation materials used in energy conversion, optoelectronics, and thermal management. This dissertation investigates thermal transport in such complex materials, including metal halide perovskites (MHPs), covalent organic frameworks (COFs), metal organic frameworks (MOFs), and 2D-3D heterostructures, through large-scale molecular dynamics (MD) simulations and frequency-resolved spectral analyses.

In MHPs, the work reveals …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

A Fault-Tolerant Exchange-Coupled Spin-Ensemble Qubit At Elevated-Temperatures, Aniruddha Chakraborty

Theses and Dissertations

This thesis introduces a novel qubit architecture: the ferromagnetic exchange-coupled spin ensemble qubit (E-qubit), designed to address the noise-induced instability. In this work, the time evolution of the ensemble’s density matrix is studied using the Liouville–von Neumann equation. To benchmark against a single-spin qubit, the gate fidelity of an E-qubit is computed in the presence of thermal noise. Coherence time is also analyzed under identical thermal condition and a linear scaling is observed with qubit size . The results show that, at 6 K , the gate fidelity error (0.7 % ) of the seven- spin ensemble is an order …

Investigating The Roles Of Intrinsic Point Defects And Transition Metal Doping In Monolayer And Bulk Tis2, Patrick J. Keeney

UNF Graduate Theses and Dissertations

Within this thesis, the magnetic and electronic properties of various 1T-TiS₂ systems are thoroughly examined using density functional theory (DFT) and scanning tunneling microscopy (STM). Formation energies and electronic implications of intrinsic point defects in bulk TiS₂ and monolayer TiS₂ are analyzed by approximating a computational monolayer of TiS₂ as the surface layer of a bulk sample. This approximation is validated given that intralayer covalent bonding dominates interlayer van der Waals interactions. We conclude that the most energetically favorable intrinsic defects are Ti atoms settling above the outermost S plane and S vacancies. In addition, the …

Frustrated Quantum Magnetism: The Interplay Of Isotropic And Anisotropic Interactions With Application To Α-Rucl3, Evan M. Wilson

UNF Graduate Theses and Dissertations

We investigate how anisotropic spin interactions, including Dzyaloshinskii–Moriya and Kitaev terms, manifest across quantum spin systems ranging from a single S = 1/2 dimer to molecular spin clusters and layered magnetic materials. Beginning with an exact analysis of the spin dimer, we demonstrate how singlet–triplet mixing induced by Dzyaloshinskii–Moriya interaction directly influences both thermodynamic observables and inelastic neutron scattering spectra. These microscopic fingerprints are then extended to trimer, tetramer, and tetrahedron geometries, where field-induced phase transitions and heat capacity anomalies reveal the interplay between isotropic Heisenberg and anisotropic Kitaev exchanges. In the frustrated zigzag honeycomb lattice, we show that a …

Synthesis And Characterization Of Doped Rare-Earth Zinc Alloys, Partha Das

Graduate Theses/Dissertations

Rare-Earth-Zinc (RE-Zn) alloys doped with manganese represent a promising class of materials with diverse applications in magnetic, electronic, and thermoelectric devices. These alloys hold significant potential owing to the unique combination of rare-earth elements' properties with the versatility of zinc, augmented by manganese doping. In this study, I present the successful synthesis of ErMn_0.2Zn_11.8 alloys, achieved through self-flux method. The synthesized crystals were characterized using electron dispersive spectroscopy (EDS) and single crystal X-ray diffraction (XRD). Additionally, magnetic measurements were performed to investigate the magnetic properties. Future plans include DFT calculations and comparison study between Rare-Earth-Zinc alloys with …

Ge/Sige Quantum Wells: Material For The Post-Moore Era, Troy Alexander Hutchins-Delgado

Optical Science and Engineering ETDs

This dissertation demonstrates high-quality germanium quantum wells on a 200 mm silicon wafer platform, enabling novel device possibilities. Partnering with a commercial silicon-germanium epitaxy supplier, we obtained shallow, undoped germanium quantum wells with high-crystalline quality, confirmed through x-ray diffraction, secondary ion mass spectroscopy, high-resolution scanning transmission electron microscopy, and energy dispersive x-ray spectroscopy. Hall bar devices fabricated on single quantum wells revealed that surface preparation can tune transport properties while maintaining peak mobilities around 10⁵ cm²V⁻¹s⁻¹. Manganese-germanide spintronic contacts were integrated via solid-state reaction, with contact quality assessed through Schottky diodes, transfer length …

Insulator-To-Metal Transition And Isotropic Gigantic Magnetoresistance In Layered Magnetic Semiconductors, Gokul Acharya, Bimal Neupane, Chia-Hsiu Hsu, Xian P. Yang, David Graf, Eun Sang Choi, Krishna Pandey, Md Rafique Un Nabi, Santosh Karki Chhetri, Rabindra Basnet, Sumaya Rahman, Jian Wang, Zhengxin Hu, Bo Da, Hugh O.H. Churchill, Guoqing Chang, M. Zahid Hasan, Yuanxi Wang, Jin Hu

Physics Faculty Publications and Presentations

Magnetotransport, the response of electrical conduction to external magnetic field, acts as an important tool to reveal fundamental concepts behind exotic phenomena and plays a key role in enabling spintronic applications. Magnetotransport is generally sensitive to magnetic field orientations. In contrast, efficient and isotropic modulation of electronic transport, which is useful in technology applications such as omnidirectional sensing, is rarely seen, especially for pristine crystals. Here a strategy is proposed to realize extremely strong modulation of electron conduction by magnetic field which is independent of field direction. GdPS, a layered antiferromagnetic semiconductor with resistivity anisotropies, supports a field-driven insulator-to-metal transition …

Substrate Interference And Strain In The Second-Harmonic Generation From Mose2 Monolayers, Sudeep Puri, Sneha Patel, Jose Luis Cabellos, Luis Enrique Rosas-Hernandez, Kaitlin Reynolds, Hugh O.H. Churchill, Salvador Barraza-Lopez, Bernardo S. Mendoza, Hiroyuki Nakamura

Physics Faculty Publications and Presentations

Nonlinear optical materials of atomic thickness, such as non-centrosymmetric 2H transition metal dichalcogenide monolayers, have a second-order nonlinear susceptibility (χ⁽²⁾) whose intensity can be tuned by strain. However, whether χ⁽²⁾ is enhanced or reduced by tensile strain is a subject of conflicting reports. Here, we grow high-quality MoSe₂ monolayers under controlled biaxial strain created by two different substrates and study their linear and nonlinear optical responses with a combination of experimental and theoretical approaches. Up to a 15-fold overall enhancement in second-harmonic generation (SHG) intensity is observed from MoSe₂ monolayers grown on SiO₂ when …

Surface Patterning On Zirconia Dental Implants Via Laser-Induced Shockwave Imprinting, Inomjon Majidov

Masters Theses & Specialist Projects

Zirconia is rapidly becoming a preferred alternative to titanium in dental applications, primarily due to its aesthetic resemblance to natural teeth. This material’s tooth-like color avoids the aesthetic issues associated with the grey metal tint of titanium implants. Additionally, zirconia is hypoallergenic, making it an ideal choice for patients with metal sensitivities or allergies. Despite these advantages, zirconia generally exhibits lower biocompatibility and osseointegration compared to titanium implants. This study investigates laser-assisted, controlled imprinting technique on zirconia surfaces to enhance these properties. Our research used zirconia pellets, produced from powdered monoclinic zirconia pressed in a pellet press machine. Two methods …

Modeling Study Of Si3N4 Waveguides On A Sapphire Platform For Photonic Integration Applications, Diandian Zhang, Shui-Qing Yu, Gregory J. Salamo, Richard A. Soref, Wei Du

Electrical Engineering and Computer Science Faculty Publications and Presentations

Sapphire has various applications in photonics due to its broadband transparency, high-contrast index, and chemical and physical stability. Photonics integration on the sapphire platform has been proposed, along with potentially high-performance lasers made of group III–V materials. In parallel with developing active devices for photonics integration applications, in this work, silicon nitride optical waveguides on a sapphire substrate were analyzed using the commercial software Comsol Multiphysics in a spectral window of 800~2400 nm, covering the operating wavelengths of III–V lasers, which could be monolithically or hybridly integrated on the same substrate. A high confinement factor of ~90% near the single-mode …

Settingsorder Article Reprints Open Accessarticle A Model To Account For The Effects Of Load Ratio And Hydrogen Pressure On The Fatigue Crack Growth Behavior Of Pressure Vessel Steels, Ashok Saxena, Kip O. Findley

Mechanical Engineering Faculty Publications and Presentations

A phenomenological model for estimating the effects of load ratio R and hydrogen pressure P_H2 on the hydrogen-assisted fatigue crack growth rate (HA-FCGR) behavior in the transient and steady-state regimes of pressure vessel steels is described. The "transient regime" is identified with crack growth within a severely embrittled zone of intense plasticity at the crack tip. The "steady-state" behavior is associated with the crack growing into a region of comparatively lower hydrogen concentration located further away from the crack tip. The model treats the effects of R and P_H2 as being functionally separable. In the transient …

Laser 3d Printing Of Diamond-Based Composite Materials For Thermal Management Applications, Nada Kraiem

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

With the trend towards miniaturization of electrical equipment and the constant increase in power density in semiconductor devices, efficient heat management has become a major concern for researchers. Indeed, this technological evolution imposes increasingly strict constraints in terms of thermal dissipation, necessitating innovative solutions to ensure better durability and reliability of components. In this context, the use of composite materials offering high thermal conductivity (TC) and low coefficient of thermal expansion (CTE) compared to pure metals has become essential to address overheating issues in electronic components.

The utilization of advanced materials such as diamond (D), with exceptional TC and hardness …

Dual Light Emission Of Cssni3-Based Powders Synthesized Via A Mechanochemical Process, Xuan Huang, Xiaobing Tang, Xiyu Wen, Yuebin Charles Lu, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Lead toxicity has hindered the wide applications of lead halide perovskites in optoelec- tronics and bioimaging. A significant amount of effort has been made to synthesize lead-free halide perovskites as alternatives to lead halide perovskites. In this work, we demonstrate the feasibility of synthesizing CsSnI3-based powders mechanochemically with dual light emissions under ambi- ent conditions from CsI and SnI2 powders. The formed CsSnI3-based powders are divided into CsSnI3-dominated powders and CsSnI3-contained powders. Under the excitation of ultraviolet light of 365 nm in wavelength, the CsSnI3-dominated powders emit green light with a wavelength centered at 540 nm, and the CsSnI3-contained powders …

Spin And Charge Transport In Metallic Ferrimagnets And Disordered Magnetic Oxides, Leopoldo A. Hernandez

Electronic Theses and Dissertations

Recent efforts have been exploring the use of thin film synthetic ferrimagnets and disordered magnetic oxides for applications in spintronic devices. Due to the antiferromagnetic exchange interaction, ferrimagnetic materials offer the ultrafast dynamics of the antiferromagnetic exchange, with a net magnetization that can be influenced externally. With two, or more, competing ferromagnet sublattices, interesting properties arise that depend on the final magnetic landscape after growth of the material and it’s inherent magnetic anisotropy energies. Properties such as magnetic compensation temperatures, and perpendicular magnetic anisotropy are attractive for applications in spintronic memory and logic devices, some already being implemented in MRAM …

Photodegradation Of Microplastics Through Nanomaterials: Insights Into Photocatalysts Modification And Detailed Mechanisms, Yiting Xiao, Yang Tian, Wenbo Xu, Jun Zhu

Biological and Agricultural Engineering Faculty Publications and Presentations

Microplastics (MPs) pose a profound environmental challenge, impacting ecosystems and human health through mechanisms such as bioaccumulation and ecosystem contamination. While traditional water treatment methods can partially remove microplastics, their limitations highlight the need for innovative green approaches like photodegradation to ensure more effective and sustainable removal. This review explores the potential of nanomaterial-enhanced photocatalysts in addressing this issue. Utilizing their unique properties like large surface area and tunable bandgap, nanomaterials significantly improve degradation efficiency. Different strategies for photocatalyst modification to improve photocatalytic performance are thoroughly summarized, with a particular emphasis on element doping and heterojunction construction. Furthermore, this review …

Effects Of Ti Addition On The Characteristics Of Al-10zn-6mg-2si/Zro2 Composites Produced By Squeeze Casting, Qesha Diva Prameshvara, Pipin Indah Lestari, Bondan Tiara Sofyan

Journal of Materials Exploration and Findings

Metal matrix composite (MMC) with 7xxx aluminum matrix is potential for ballistic applications due to the combination of strength, toughness, and light weight. Previous study successfully produced aluminum-based composites with SiC particles which were able to stop type III bullet, however cracks remained on back of the plate. Therefore, in this research, SiC was replaced by zirconia (ZrO₂) due to its high fracture toughness. Ti-B grain refiner was added to further improve toughness through grain boundary strengthening mechanism. This research developed 5 vol.% ZrO₂ strengthened Al-10Zn-6Mg-2Si composite with addition of Al-5Ti-1B grain refiner produced through squeeze casting …

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

Shorting At Long Duration: Impact Of Extended Discharge Capacity On Battery Solid Electrolytes, Ryan C. Hill, Amanda S. Peretti, Leo J. Small, Erik D. Spoerke, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

Long-duration energy storage (LDES) is critical to a stable, resilient, and decarbonized electric grid. While batteries are emerging as important LDES devices, extended, high-power discharges necessary for cost-competitive LDES present new materials challenges. Focusing on a new generation of low-temperature molten sodium batteries, we explore here unique phenomena related to long-duration discharge through a well-known solid electrolyte, NaSICON. Specifically, molten sodium symmetric cells at 110 ° C were cycled at 0.1 A cm−2 for 1–23 h discharges. Longer discharges led to unstable overpotentials, reduced resistances, and decreased electrolyte strength, caused by massive sodium penetration not observed in shorter duration discharges. …

Interfacial Magnetism And Anisotropy In Dirac And Weyl Semimetals, Noah Schulz

USF Tampa Graduate Theses and Dissertations

Semimetals have gained intense interest recently due to their exotic magnetic and electronic properties. One of the most widely studied semimetals is graphene, a Dirac semimetal. The utilization of graphene in devices and sensors requires interfacing it with other materials, which may induce potentially strong interfacial effects. Furthermore, graphene alone does not possess magnetic order. Studying the interfacial effects between graphene and magnetic materials is therefore of great importance in the application of graphene to meet modern technological needs. Furthermore, by understanding the fundamental interfacial physics between graphene and magnetic materials, new properties can be unlocked, broadening the possible applications …

Machine Learning Prediction Of Photoluminescence In Mos2: Challenges In Data Acquisition And A Solution Via Improved Crystal Synthesis, Ethan Swonger, John Mann, Jared Horstmann, Daniel Yang

Seaver College Research And Scholarly Achievement Symposium

Transition metal dichalcogenides (TMDCs) like molybdenum disulfide (MoS2) possess unique electronic and optical properties, making them promising materials for nanotechnology. Photoluminescence (PL) is a key indicator of MoS2 crystal quality. This study aimed to develop a machine-learning model capable of predicting the peak PL wavelength of single MoS2 crystals based on micrograph analysis. Our limited ability to consistently synthesize high-quality MoS2 crystals hampered our ability to create a large set of training data. The project focus shifted towards improving MoS2 crystal synthesis to generate improved training data. We implemented a novel approach utilizing low-pressure chemical vapor deposition (LPCVD) combined with …

The Interplay Of Spin, Charge, And Heat: From Metal/Insulator Heterostructures To Perovskite Bilayers, Sam M. Bleser

Electronic Theses and Dissertations

In this dissertation begin with an investigation of non-local spin transport in an amorphous germanium (a-Ge) sample via the inverse spin Hall effect (ISHE). In that study we show that commonly used techniques such as differential conductance and delta mode of a paired Keithley 6221/2182a for non-local resistance measurements can lead to false indicators of spin transport. Next, we turn out attention to a thickness dependent study in thermally-evaporated chromium (Cr) thin films on a bulk polycrystalline yttrium-iron-garnet (YIG) substrate. This project analyzed the spin transport in the Cr films versus thickness via the longitudinal spin Seebeck effect (LSSE). This …

Thermal, Electrical, And Spin Transport: Encompassing Low-Damping Ferromagnets And Antiferromagnetic/Ferromagnetic Heterostructures, Matthew Ryan Natale

Electronic Theses and Dissertations

Continuing technological advancements bring forth escalating challenges in global energy consumption and subsequent power dissipation, posing significant economic and environmental concerns. In response to these difficulties, the fields of thermoelectrics, spintronics, and spincaloritronics emerge as contemporary solutions, each presenting unique advantages. Thermoelectric devices, based on the Seebeck effect, other a passive, carbon-free energy generating solution from waste heat. Although current thermoelectric technology encounters hurdles in achieving optimal efficiencies without intricate designs or complex materials engineering, recently research into low-damping metallic ferromagnetic thin films have provided a new method to enhance spin wave lifetimes, thus contributing to thermoelectric voltage improvements. As …

Mechanisms Of Dendritic Shorting In Lithium Metal Batteries With Li7la3zr2o12 Solid Electrolytes, Lukas Karapin-Springorum

Pomona Senior Theses

Energy storage will play a crucial role in efforts to mitigate the effects of climate change caused by greenhouse gas emissions from human activity. Lithium metal batteries using solid electrolytes like Li₇La₃Zr₂O₁₂ have higher energy density than lithium-ion batteries, which may enable a more rapid and complete electrification of transportation. However, lithium metal batteries suffer from undesirable short-circuiting when metallic lithium deposits connect the two electrodes. It has been debated whether these lithium dendrites generally grow directionally from the anode or are generated by the reduction of lithium ions inside the solid electrolyte, …

Structural And Magnetic Properties Of Molecular Beam Epitaxy (Mnsb2te4)X(Sb2te3)1−X Topological Materials With Exceedingly High Curie Temperature, Candice R. Forrester, Christophe Testelin, Kaushini Wickramasinghe, Ido Levy, Dominique Demaille, David Hrabovsky, Xiaxin Ding, Lisa Krusin-Elbaum, Gustavo Lopez, Maria C. Tamargo

Publications and Research

Tuning the properties of magnetic topological materials is of interest to realize exotic physical phenomena, new quantum phases and quasiparticles, and topological spintronic devices. However, current topological materials exhibit Curie temperature (T_C) values far below those needed for practical applications. In recent years, significant progress has been made to control and optimize T_C, particularly through defect-engineering of these structures. Most recently, we reported T_C values up to 80 K for (MnSb₂Te₄)_x(Sb₂Te₃)_1−x when 0.7 ≤ x ≤ 0.85 by controlling the composition x and the …

“Zero” Porosity High Loading Nmc622 Positive Electrodes For Li-Ion Batteries, Haidar Y. Alolaywi, Kubra Uzun, Yang-Tse Cheng

Chemical and Materials Engineering Faculty Publications

LiNi0.6 Mn0.2Co0.2 O 2 (NMC622) is a widely used positive electrode material for lithium-ion batteries, including electric vehicles. In this work, we investigated the effects of porosity, ranging from “zero” to the typical 35%, on the electrochemical behavior of high- loading NMC622 electrodes. Although it is well known that the energy density of the electrode increases with increasing areal capacity and decreasing porosity, NMC-positive electrodes with exceedingly low porosity (e.g., near zero) and high loading (e.g., 4 mAh cm−2 ) have not been investigated. Here, we report an intriguing observation that the “zero porosity” NMC electrode can have higher capacity …

Processing, Stability, And High-Temperature Properties Of Doped Lacro3-Based Refractory Ceramics And Composites For Harsh Environments Sensing Applications, Javier A. Mena

Graduate Theses, Dissertations, and Problem Reports (ETD)

In order to test and monitor the operational stability and conditions of various energy, transportation, and manufacturing systems and their components, accurate sensors capable of operating at temperatures over 1000 °C in various environments for long durations are required. In addition, many of these harsh environmental systems do not permit sensors to be directly inserted into the environment, so the sensors need to be embedded into the surrounding support or thermal protective materials. Some technological and industrial applications that require the use of harsh environment conditions sensing include nuclear and chemical reactors, jet engines, heavyduty gas turbines, rotating bearings in …

Design And Performance Of Superconducting Switches For Nanowire Detectors In Magnetic Fields, Timothy James Draher

Graduate Research Theses & Dissertations

Superconducting nanowire devices fit a broad spectrum of applications, including particle detection and quantum computing, and their expanding use across various fields highlights their role in the hybridization of superconducting and conventional semiconductor electronics. Despite their potential, the low signal output of these devices raises challenges in scalability and integration, particularly in applications for nuclear and high-energy physics, where resilience in magnetic fields is becoming a critical optimization factor. The superconducting nanowire cryotron (nTron) addresses these issues by providing operational gain and logic switching in superconducting nanowire circuits, demonstrating adaptability to multiple materials. This dissertation focuses on modifying the conventional …