Atomic, Molecular and Optical Physics Commons^™

A Computational Investigation Of Wood Selection For Acoustic Guitar, Jonah Osterhus

Senior Honors Theses

The acoustic guitar is a stringed instrument, often made of wood, that transduces vibrational energy of steel strings into coupled vibrations of the wood and acoustic pressure waves in the air. Variations in wood selection and instrument geometry have been shown to affect the timbre of the acoustic guitar. Computational methods were utilized to investigate the impact of material properties on acoustic performance. Sitka spruce was deemed the most suitable wood for guitar soundboards due to its acoustic characteristics, strength, and uniform aesthetic. Mahogany was deemed to be the best wood for the back and sides of the guitar body …

Spin Disorder Control Of Topological Spin Texture, Hongrui Zhang, Yu-Tsun Shao, Xiang Chen, Binhua Zhang, Tianye Wang, Fanhao Meng, Kun Xu, Peter Meisenheimer, Xianzhe Chen, Xiaoxi Huang, Piush Behera, Sajid Husain, Tiancong Zhu, Hao Pan, Yanli Jia, Nick Settineri, Nathan Giles-Donovan, Zehao He, Andreas Scholl, Alpha N'Diaye, Padraic Shafer, Archana Raja, Changsong Xu, Lane W. Martin, Michael F. Crommie, Jie Yao, Ziqiang Qiu, Arun Majumdar, Laurent Bellaiche, David A. Muller, Robert J. Birgeneau, Ramamoorthy Ramesh

Physics Faculty Publications and Presentations

Stabilization of topological spin textures in layered magnets has the potential to drive the development of advanced low-dimensional spintronics devices. However, achieving reliable and flexible manipulation of the topological spin textures beyond skyrmion in a two-dimensional magnet system remains challenging. Here, we demonstrate the introduction of magnetic iron atoms between the van der Waals gap of a layered magnet, Fe₃GaTe₂, to modify local anisotropic magnetic interactions. Consequently, we present direct observations of the order-disorder skyrmion lattices transition. In addition, non-trivial topological solitons, such as skyrmioniums and skyrmion bags, are realized at room temperature. Our work highlights …

Algorithm-Based Linearly Graded Compositions Of Gesn On Gaas (001) Via Molecular Beam Epitaxy, Calbi Gunder, Mohammad Zamani-Alavijeh, Emmanuel Wangila, Fernando Maia De Oliveira, Aida Sheibani, Serhii Kryvyi, Paul C. Attwood, Yuriy I. Mazur, Shui-Qing Yu, Gregory J. Salamo

Physics Faculty Publications and Presentations

The growth of high-composition GeSn films in the future will likely be guided by algorithms. In this study, we show how a logarithmic-based algorithm can be used to obtain high-quality GeSn compositions up to 16% on GaAs (001) substrates via molecular beam epitaxy. Herein, we use composition targeting and logarithmic Sn cell temperature control to achieve linearly graded pseudomorph Ge_1−xSn_x compositions up to 10% before partial relaxation of the structure and a continued gradient up to 16% GeSn. In this report, we use X-ray diffraction, simulation, secondary ion mass spectrometry, and atomic force microscopy to analyze and …

Plasma Diagnostics For Anode Cathode Plasmas And High Energy Density Physics On A Linear Transformer Driver, Robert Beattie-Rossberg

Electrical and Computer Engineering ETDs

A twelve-brick air insulated linear transformer driver (LTD) was characterized by charging to voltages ranging from 30 to 70 kV and delivering energy to two separate resistive loads. Various plasma diagnostics were built and fielded with an emphasis on the design, implementation and analysis of a Mach Zehnder interferometer, a moiré deflectometer and a spectroscopy system providing information on the temporal evolution of plasma electron density and atomic composition. Rogowski coils, XRD radiation detectors, framing camera images and time integrated DSLR images are used to further understand load conditions where current data, x ray radiation data, velocity data and instability …

Nowcasting Solar Euv Irradiance With Photospheric Magnetic Fields And The Mg Ii Index, Kara L. Kniezewski, Samuel J. Schonfeld, Carl J. Henney

Student Publications

A new method to nowcast spectral irradiance in extreme ultraviolet (EUV) and far ultraviolet (FUV) bands is presented here, utilizing only solar photospheric magnetograms and the Mg II index (i.e., the core-to-wing ratio). The EUV and FUV modeling outlined here is a direct extension of the SIFT (Solar Indices Forecasting Tool) model, based on Henney et al. (2015, https://doi.org/10.1002/2014sw001118). SIFT estimates solar activity indices using the earth-side solar photospheric magnetic field sums from global magnetic maps generated by the ADAPT (Air Force Data Assimilative Photospheric Flux Transport) model. Utilizing strong and weak magnetic field sums from ADAPT maps, Henney …

Advancements In Characterization Of Ancient Potteries From Southeast Asia: A Review Of Analytical Techniques, Chitnarong Sirisathitkul

Makara Journal of Science

Ancient potteries offer valuable information regarding technological advancements, life dynamics, cultural diversity, and trade routes in the past. Earthenware, stoneware, and porcelain from Southeast Asia have been characterized using several analytical techniques, as reviewed in this article. Fluorescent and diffracted X-rays give rise to elemental and phase compositions, respectively. Examination of molecular bonds requires vibrational spectroscopy, which is useful for the identification of organic materials in ancient potteries. With the advent of portable X-ray fluorescence and Raman spectrometry, on-site analysis of archeological ceramics is now possible. For in-depth analysis, synchrotron light sources can provide new insights into artifacts through X-ray …

Neutron Spectrum Unfolding From Activation Foils Irradiated In Gamble Ii Using Deuterated Polyethylene Anodes, Christopher J. Smith

Theses and Dissertations

Neutrons can cause irreparable harm to electronics, and experiments are needed to understand their effects fully. This work explores using pulsed power, which is low-cost compared to other sources, to create a useful neutron-rich environment. Deuterated polyethylene was used as anode and catcher material to generate the neutrons from the Deuterium-Deuterium (DD) fusion reaction. A simple, effective, and repeatable method was employed to directly cast deuterated polyethylene onto polyethylene sheets to fabricate the anode and catcher. The DD reactions were made by an ion beam-driven pulsed power generator, Gamble II, with the catcher located in the cathode. Zinc, copper, aluminum, …

Analyzing The Effects Of Atmospheric Turbulence On Polarization-Entangled Photon Pairs Using Quantum State Tomography, Noah S. Everett

Theses and Dissertations

To help in building a quantum-based communication link, we experimentally designed a system to simulate atmospheric turbulence and characterize its effects on a polarization-entangled photon-pair source. The simulated turbulence is constructed using two afocal optical systems with a phase plate inserted in each to mimic both weak and strong atmospheric turbulence respectively. After propagation, quantum state tomography (QST) is performed on each pair to reconstruct the density matrix of the pair’s overall polarization state. In characterization of the simulated turbulence, we were able to reach strengths up to a D/r0 of 18.2, which begins to approach the strong turbulent regime. …

Compton Scattering Of Mammographic Soft X-Ray Beams By Alkali And Transition Metal Salt Filters Produce X-Ray Interference Zones That May Have Treatment Potential For Localized Cancer Lesions, Subhendra N. Sarkar, Eric Lobel, Sabina Rakhmatova, Derbie Desir, Somdat Kissoon, Daler Djuraev, Katie Tam

Publications and Research

In breast x-ray imaging scattered radiation adds 50% of harmful radiation dose from anisotropic Compton scattering mechanism. We have been working with double layered inorganic salt materials that can induce Compton scattering to the incident mammographic x ray beams (in 20-30 kVp range) with adequate isotropy (angular control). Typically metal nitrates and alkali halide salt layers are shown here to cause low energy radiation interference zones with high and low photon intensities and local flux heterogeneity in terms of flux covariance. Spatial variation of low energy photon flux creates concentrated and sparse radiation zones that may be used to induce …

Radiation Exposure Calibration Of The Al2o3:C With Radium-226 And Cesium-137 Using The Osl Method, Selma Tepeli Aydin

All Theses

Optically stimulated luminescence (OSL) dosimetry was utilized to calibrate Al₂O₃:C powder dosimeters, available commercially as the nanoDot® from Landauer Inc., and compare the dosimeter response to radium-226 (²²⁶Ra) and cesium-137 (¹³⁷Cs). The signal from the OSL was quantified using a microSTARii^® OSL reader also produced by Landauer Inc. Dose-response curves were developed for ²²⁶Ra and ¹³⁷Cs experiments (5 dosimeters each) at thirteen absorbed doses. Individual dosimeter response was tracked by serial number. Linear regression analysis was performed to determine if there were significant differences between the intercepts of the …

Analyzing The Effects Of Ultrafast Laser Processing On Mechanical Properties Of 3d-Printed Pla Parts, Darshan Pramodbhai Yadav

Theses and Dissertations

Recent advances in additive manufacturing technologies have already led to wide-scale adoption of 3D-printed parts in various industries. The expansion in choice of materials that can be processed, particularly using Fused Deposition Modeling (FDM), and the steady advancements in dimensional accuracy control have extended the range of applications far beyond rapid prototyping. However, additive manufacturing still has considerable limitations compared to traditional and subtractive manufacturing processes. This work addresses limitations associated with the as-deposited surface roughness of 3D-printed parts. The effects of roughness-induced stress concentrations were studied on ultimate tensile strength and fatigue life. The samples were manufactured using a …

Quantitative, Photocurrent Multidimensional Coherent Spectroscopy, Adam Halaoui

Electronic Theses and Dissertations

Multidimensional coherent spectroscopy (MDCS) is a quickly growing field that has a lot of advantages over more conventional forms of spectroscopy. These advantages all come from the fact that MDCS allows us to get time resolved correlated emission and absorption spectra using very precisely chosen interactions between the density matrix and the excitation laser. MDCS spectra gives the researcher a lot of information that can be extracted purely through qualitative analysis. This is possible because state couplings are entirely separated on the spectra, and once we know how to read the data, we can see how carriers transport in the …

Brdf Measurements And Physical Optics Modeling Applied To Anisotropic Satellite Solar Cells, Madilynn E. Compean

Theses and Dissertations

Light curve analysis is often used to discern information about satellites in geosynchronous orbits, and since solar panels comprise relatively large surface areas, their reflected energy can contribute greatly to observed light curves. Data was collected using a space qualified solar cell interrogated by a green HeNe laser. The data validated certain aspects from previous work, but also identified multi-slit behavior, showed that the specular term was a second diffraction pattern, and diagnosed the out-of-plane diffraction curvature as the conical diffraction phenomenon. Two physical-optics-based models were developed to incorporate these new features and better predict solar cell BRDF solely from …

High-Power Laser Cooling And Temperature-Dependent Fluorescence Studies Of Ytterbium Doped Silica, Brian Topper

Optical Science and Engineering ETDs

Experimental observation of optical refrigeration using ytterbium doped silica glass in recent years has created a new solution for heat mitigation in high-power laser systems, nonlinear fiber experiments, integrated photonics, and precision metrology. Current efforts of different groups focus on compositional optimization, fiber fabrication, and investigating how much silica can be cooled with a laser. At the start of this work, the best effort in laser cooling ytterbium doped silica saw cooling by 6 K from room temperature. This dissertation follows the experimental efforts that culminated in the increase of this initial record by one order of magnitude. Comprehensive spectroscopic …

Study Of Radiation Effects In Gan-Based Devices, Han Gao

Electrical Engineering Theses and Dissertations

Radiation tolerance of wide-bandgap Gallium Nitride (GaN) high-electron-mobility transistors (HEMT) has been studied, including X-ray-induced TID effects, heavy-ion-induced single event effects, and neutron-induced single event effects. Threshold voltage shift is observed in X-ray irradiation experiments, which recovers over time, indicating no permanent damage formed inside the device. Heavy-ion radiation effects in GaN HEMTs have been studied as a function of bias voltage, ion LET, radiation flux, and total fluence. A statistically significant amount of heavy-ion-induced gate dielectric degradation was observed, which consisted of hard breakdown and soft breakdown. Specific critical injection level experiments were designed and carried out to explore …

Intrinsic Point Defects (Vacancies And Antisites) In Cdgep2 Crystals, Timothy D. Gustafson, Nancy C. Giles, Peter G. Schunemann, Kevin T. Zawilski, Kent L. Averett, Jonathan E. Slagle, Larry E. Halliburton

Faculty Publications

Cadmium germanium diphosphide (CdGeP₂) crystals, with versatile terahertz-generating properties, belong to the chalcopyrite family of nonlinear optical materials. Other widely investigated members of this family are ZnGeP₂ and CdSiP₂. The room-temperature absorption edge of CdGeP₂ is near 1.72 eV (720 nm). Cadmium vacancies, phosphorous vacancies, and germanium-on-cadmium antisites are present in as-grown CdGeP₂ crystals. These unintentional intrinsic point defects are best studied below room temperature with electron paramagnetic resonance (EPR) and optical absorption. Prior to exposure to light, the defects are in charge states that have no unpaired spins. Illuminating a CdGeP_{2 …}

Filaments And Their Application To Air Lasing, Spectroscopy, And Guided Discharge, Ali Rastegari

Optical Science and Engineering ETDs

Laser filamentation is a fascinating phenomenon that occurs when an intense laser beam travels through transparent materials, in particular air. At sufficiently high power (TW in the near IR, GW in the UV), instead of spreading out like a regular laser beam, something remarkable happens: the laser beam becomes tightly focused, creating a thin and intense column of light called a laser filament. Laser filamentation is characterized by two main properties: (I) a high-intensity core that remains narrow over long distances beyond the Rayleigh range and (II) a low-density plasma channel within the core. In recent years, laser filamentation has …

Femtotesla Magnetometry And Nanoscale Imaging With Color Centers In Diamond, Yaser Silani

Optical Science and Engineering ETDs

Intriguing photophysical properties of color centers in diamond make them ideal candidates for many applications from imaging and sensing to quantum networking. In the first part of this work, we have studied the silicon vacancy (SiV) centers in diamond for nanoscale imaging applications. We showed that these centers are promising fluorophores for Stimulated Emission Depletion (STED) microscopy, owing to their photostable, near-infrared emission and favorable photophysical properties. In the second part, we built a femtotesla Radio-Frequency (RF) magnetometer based on the diamond nitrogen vacancy (NV) centers and magnetic flux concentrators. We used this sensor to remotely detect Nuclear Quadrupole Resonance …

Characterizing Gesn Alloys By Sem/Eds And Photoluminescence Spectroscopy, Christopher M. Sutphin

Theses and Dissertations

Germanium tin (GeSn) alloys are being studied as potential transition metal (Group IV) photoelectric semiconductors or optical detectors. GeSn alloys could be employed as an optically active material within a computer. Compared to current technologies, a direct band gap GeSn alloy can be engineered to operate with higher thermal stability and efficiency. The GeSn alloy studied was composed of Ge and Si substrates with various Sn percentages grown using remote plasma-enhanced chemical vapor deposition (RPECVD). Photoluminescence spectroscopy (PL) techniques were initially used to determine the GeSn properties, including the band gap. The Ge_91.2Sn_8.8 PL spectra suggested the …

Description Of Reaction And Vibrational Energetics Of Co2-Nh3interaction Using Quantum Computing Algorithms, Manh Tien Nguyen, Yueh-Lin Lee, Dominic Alfonso, Qing Shao, Yuhua Duan

Markey Cancer Center Faculty Publications

CO2 capture is critical to solving global warming. Amine-based solvents are extensively used to chemically absorb CO2. Thus, it is crucial to study the chemical absorption of CO2 by amine-based solvents to better understand and optimize CO2 capture processes. Here, we use quantum computing algorithms to quantify molecular vibrational energies and reaction pathways between CO2 and a simplified amine-based solvent model—NH3. Molecular vibrational properties are important to understanding kinetics of reactions. However, the molecule size correlates with the strength of anharmonicity effect on vibrational properties, which can be challenging to address using classical computing. Quantum computing can help enhance molecular …

Development Of Interatomic Potential Of High Entropy Diborides With Artificial Intelligence Approach To Simulate The Thermo-Mechanical Properties, Nur Aziz Octoviawan

Graduate Theses/Dissertations

The interatomic potentials designed for binary/high entropy diborides and ultra-high temperature composites (UHTC) have been developed through the implementation of deep neural network (DNN) algorithms. These algorithms employed two different approaches and corresponding codes; 1) strictly local & invariant scalar-based descriptors as implemented in the DEEPMD code and 2) equivariant tensor-based descriptors as included in the ALLEGRO code. The samples for training and validation sets of the forces, energy, and virial data were obtained from the ab-initio molecular dynamics (AIMD) simulations and Density Functional Theory (DFT) calculations, including the simulation data from the ultra-high temperature region (> 2000K). The study …

Exploration And Synthesis Of Half-Heusler And Disordered Ternary Intermetallic Single Crystals, Md Fahel Bin Noor

Graduate Theses/Dissertations

Due to their distinct physical and chemical characteristics, half-Heusler compounds are intermetallic materials that have undergone substantial research. The general formula for these compounds is XYZ, where X and Y are transition metals and Z is a p-block element. Thermoelectricity is among the half-Heusler compounds' most exciting potential uses, but additional possible applications include spintronics, magnetic refrigeration, and superconductivity, among others. Recently, half-Heuslers (and Heuslers) have emerged as candidates for catalysts for hydrogenation. The CoNbSn half-Heusler compound, as well as another unique intermetallic ternary compound, the disordered Mn_4-xCr_xAl₁₁, were successfully grown as single crystals …

High Energy Blue Light Induces Oxidative Stress And Retinal Cell Apoptosis, Jessica Malinsky

Capstone Showcase

Blue light (BL) is a high energy, short wavelength spanning 400 to 500 nm. Found in technological and environmental forms, BL has been shown to induce photochemical damage of the retina by reactive oxygen species (ROS) production. Excess ROS leads to oxidative stress, which disrupts retinal mitochondrial structure and function. As mitochondria amply occupy photoreceptors, they also contribute to oxidative stress due to their selectively significant absorption of BL at 400 to 500 nm. ROS generation that induces oxidative stress subsequently promotes retinal mitochondrial apoptosis. BL filtering and preventative mechanisms have been suggested to improve or repair BL-induced retinal damage, …

Effect Of Decorating Super Paramagnetic Iron Oxide Nanoparticles With Silver Nanoparticles On Their Magneto-Photo Thermal Heating Efficiency, Anthony Joseph Afful

All Graduate Theses, Dissertations, and Other Capstone Projects

Cancer treatment is rather dangerous to the body, often involving many secondary effects, including nausea, hair loss, and weight fluctuations. The search for non-invasive, highly efficient, and targetable treatments ameliorates these issues. Super paramagnetic iron oxide nanoparticles (SPIONS) have been used for other medical purposes such as magnetic resonance imaging contrast agent and is being extensively studied as a potential candidate for many cancer therapeutic and diagnostic approaches due to its biocompatibility and superior magnetic properties. When subjected to an external alternating magnetic field SPIONS generate heat mainly due to the friction of the SPIONS against the fluid it is …

Machine Learning Strategies For Potential Development In High-Entropy Driven Nickel-Based Superalloys, Marium Mostafiz Mou

Graduate Theses/Dissertations

In this study, I developed Deep Learning interatomic potentials to model a multi-phase and multi-component system of Ni-based Superalloys. The system has up to three major phase constituents, namely Gamma, Gamma Prime, and Transition-metal rich Carbide. I utilized invariant scalar-based and/or equivariant, tensor-based neural network (NN) approach as implemented in DEEPMD, NEQUIP/ALLEGRO codes, respectively, and Moment Tensor Potential (MTP). For the training and validation sets, I employed the ab-initio molecular dynamics (AIMD) trajectory results and ground state DFT calculations, including the energy, force, and virial database from highly diverse compositions, temperatures, and pressures following a “High Entropy Strategy.” The Deep …

Mechanical Behavior Of Metallic Core-Shell Nanoparticles Under Compressive Loading, Phillip Tomich

Graduate Research Theses & Dissertations

Core/shell metallic nanoparticles have been shown to be a promising material type for additive manufacturing in the aerospace and automotive fields. Within additive manufacturing they will be used to accurately make an array of nanoparticles within the grains of metal matrix composites. This in turn will help to strengthen the material while remaining ductility and light weight. In this study, copper/aluminum core/shell nanoparticles are compressed under [100], [110], [111], and [112] directions to showcase their anisotropic material properties. Models of their individual counterparts were also investigated. There are no previous works showing the deformation mechanisms of copper/aluminum core/shell nanoparticles. Molecular …

Impulse Measurement Methods For Pulsed Laser Ablation Propulsion, Ishaan Mishra, Scott Kirkpatrick

Rose-Hulman Undergraduate Research Publications

Pulsed laser ablation propulsion has the potential to revolutionize space exploration by eliminating the requirement of a spacecraft to carry its propellant and power source as the high-power laser is situated off-board. More experimentation needs to be done to optimize this propulsion system and understand the mechanisms of thrust generation. There are many methods used to calculate the impulse imparted in pulsed laser ablation experiments. In this paper, key performance parameters are derived for some of the impulse measurement methods used in ablation propulsion experiments. Regimes discussed include the torsional pendulum system, simple pendulum system, and solid and liquid microspheres.

Low-Cost Compact Optical Spectroscopy And Novel Spectroscopic Algorithm For Point-Of-Care Real-Time Monitoring Of Nanoparticle Delivery In Biological Tissue Models, Zahid Hasan, Jing Yan, Zhongchao Yi, Madison O. Korfhage, Sheng Tong, Caigang Zhu

Markey Cancer Center Faculty Publications

Objective: Real-time monitoring of nanoparticle delivery in biological models is essential to optimize nanoparticle- mediated therapies. However, few techniques are available for convenient real-time monitoring of nanoparticle concentrations in tissue samples. This work reported novel optical spectroscopic approaches for low-cost point-of-care real-time quantification of nanoparticle concentrations in biological tissue samples.

Methods: Fiber probe measured diffuse reflectance can be described with a simple analytical model by introducing an explicit dependence on the reduced scattering coefficient. Relying on this, the changes on the inverse of diffuse reflectance are proportional to absorption change when the scattering perturbation is negligible. We developed this model …

Enabling Rapid Chemical Analysis Of Plutonium Alloys Via Machine Learning-Enhanced Atomic Spectroscopy Techniques, Ashwin P. Rao

Theses and Dissertations

Analytical atomic spectroscopy methods have the potential to provide solutions for rapid, high fidelity chemical analysis of plutonium alloys. Implementing these methods with advanced analytical techniques can help reduce the chemical analysis time needed for plutonium pit production, directly enabling the 80 pit-per-year by 2030 manufacturing goal outlined in the 2018 Nuclear Posture Review. Two commercial, handheld elemental analyzers were validated for potential in situ analysis of Pu. A handheld XRF device was able to detect gallium in a Pu surrogate matrix with a detection limit of 0.002 wt% and a mean error of 8%. A handheld LIBS device was …

Developing Optical Devices And Projects For Teaching Engineering, Nathan D. Lemke, John Mccauley, Tristan E. Noble, Grace Riermann, Ellesa St. George, Nathan C. Lindquist, Keith R. Stein, Karen Irene Rogers

Physics and Engineering Faculty Publications

We are creating a suite of tools and techniques based on optics to be used for teaching a variety of engineering topics. Each tool is intended for non-expert use and without the need for high-end equipment such as vibration-free optical tables. Here we report progress on three such tools: image-plane digital holography for measuring mechanical deformation; schlieren imaging of convective flows using a smart phone; and a simple optical communication protocol using LabVIEW. We will present the designs of the tools and preliminary results from teaching engineering labs and projects with these tools. Specific courses impacted to date include Fluid …