Physics Commons^™

Effective Visibility In The Infrared Bands, Peter L. Dean-Erlander, Steven T. Fiorino, Ronald G. Driggers

Faculty Publications

Visibility is an atmospheric metric for the comparison of terrestrial imaging conditions and locations. A limitation of visibility is that it is defined for the visible spectrum only, and there is no simple infrared equivalent. This study compares three reflective infrared wavebands: near-IR (NIR), shortwave IR (SWIR), and extended shortwave IR (eSWIR), to the visible band across a global set of cities to develop three rule-of-thumb functions for IR effective visibility. To accomplish this, a radiometric sensor model is combined with the Laser Environmental Effects Definition and Reference (LEEDR) software package to calculate the visibility of a black-and-white contrast target …

Unveiling The Interplay Of Electronic And Phononic Excitations In Laser-Induced Oxygen Activation On Ru(0001), Xiangrui Wang, Jiamin Wang, Paul Spiering, Liping Liu, Jörg Meyer, Jerry L. Larue, Hongliang Xin

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Understanding laser-induced dynamics on metal surfaces poses significant challenges due to the intricate interplay between electronic and phononic degrees of freedom, which evolve on distinct timescales. In this study, we introduce a machine learning-accelerated approach to molecular dynamics simulations that incorporates anisotropic electronic friction, providing deeper insights into these complex processes. Our framework extends the accessible time and length scales for nonadiabatic dynamics simulations, enabling a detailed investigation of the laser-induced activation of oxygen on the Ru(0001) surface. Statistical analysis reveals that strong electronic excitation dominates the first 800 fs after laser exposure. Beyond this timescale, energy deposited by electronic …

Mechanical And Thermal Measurement Techniques For Crystalline-Core/Crystalline-Clad Optical Fibers, Evan Watkins

All Theses

Optical fiber laser systems offer advantages such as high optical gain, efficient cooling, and the production of high-quality optical beams. Fiber lasers are characterized by their unique core-cladding structure, providing optical benefits and mechanical properties that impact their performance. Interests in materials such as yttrium aluminum garnets (YAG) and lutetium oxide (Lu2O3 also lutetia) as laser mediums are due to their high average power capabilities, but thermal management remains a challenge. This thesis discusses the choice of ytterbium (Yb3+) as a dopant in YAG and lutetia, exploring its electronic structure and relevance to thermal properties. The thesis focuses on the …

Robust Zero Modes In Non-Hermitian Systems Without Global Symmetries, Jose D. H. Rivero, Courtney Fleming, Bingkun Qi, Liang Feng, Li Ge

Publications and Research

We present an approach to achieve zero modes in lattice models that do not rely on any symmetry or topology of the bulk, which are robust against disorder in the bulk of any type and strength. Such symmetry-free zero modes (SFZMs) are formed by attaching a single site or small cluster with zero mode(s) to the bulk, which serves as the “nucleus” that expands to the entire lattice. We identify the requirements on the couplings between this boundary and the bulk, which reveals that this approach is intrinsically non-Hermitian. We then provide several examples with either an arbitrary or structured …

Non-Hermitian Gauged Laser Arrays With Localized Excitations: Anomalous Threshold And Generalized Principle Of Selective Pumping, Li Ge, Zihe Gao, Liang Feng

Publications and Research

We investigate non-Hermitian skin modes in laser arrays with spatially localized excitation. Intriguingly, we observe an unusual threshold behavior when selectively pumping either the head or the tail of these modes: both cases exhibit the same lasing threshold and hence defy the conventional principle of selective pumping, which aims to maximize the overlap between the pump profile and the target lasing mode. To shed light on this enigma, we reveal a previously overlooked phenomenon, i.e., energy exchange at non-Hermitian coupling junctions with the photonic environment, which does not occur with uniform gain or loss. Utilizing a transfer matrix approach, we …

Optical Tweezers: Exerting Force With Light, Gabriella Seifert

Scripps Senior Theses

Photons carry momentum. When a tightly-focused beam of photons hit a particle, they transfer some of their momentum to the particle, exerting a force. Optical tweezers take advantage of this phenomenon to trap (or “tweeze”) a spherical bead just after the focus of a diverging laser beam, creating a potential well that pulls in beads. In this thesis, I predict the force exerted on trapped beads and measure the actual force using an optical tweezers setup that I built. To predict the force, I follow the path of all possible rays from a diverging beam incident on a spherical bead …

Atomic Gradiometry Based On The Interference Of Microwave Optical Sidebands, Kaleb L. Campbell

Optical Science and Engineering ETDs

We describe a novel pulsed magnetic gradiometer based on the optical interference of sidebands generated using two spatially separated alkali vapor cells. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with Rubiduim 87 atoms in a coherent superposition of magnetically sensitive hyperfine ground states. First, experimental evidence of the sideband process is described for both steady-state and pulsed operation. Then, a theoretical framework is developed that accurately models sideband generation based on density matrix formalism. The gradiometer is then constructed using two spatially separated vapor cells, and a beat-note is generated. The …

Noncontact Liquid Crystalline Broadband Optoacoustic Sensors, Hengky Chandrahalim, Michael T. Dela Cruz

AFIT Patents

An optoacoustic sensor includes a liquid crystal (LC) cell formed between top and bottom plates of transparent material. A transverse grating formed across the LC cell that forms an optical transmission bandgap. A CL is aligned to form a spring-like, tunable Bragg grating that is naturally responsive to external agitations providing a spectral transition regime, or edge, in the optical transmission bandgap of the transverse grating that respond to broadband acoustic waves. The optoacoustic sensor includes a narrowband light source that is oriented to transmit light through the top plate, the LC cell, and the bottom plate. The optoacoustic sensor …

Developing A Data Acquisition System For Use In Cold Neutral Atom Traps, Jonathan E. Fuzaro Alencar

Physics

The rising interest in quantum computing has led to new quantum systems being developed and researched. Among these are trapped neutral atoms which have several desirable features and may be configured and operated on using lasers in an optical lattice. This work describes the development of a new data acquisition system for use in tuning lasers near the precise hyperfine transition frequencies of Rb 87 atoms, a crucial step in the functionality of a neutral atom trap. This improves on previous implementations that were deprecated and limited in laser frequency sweep range. Integration into the experiment was accomplished using an …

Study Of The Effects Of Cavity Mode Spacing On Mode-Hopping In Iii–V/Si Hybrid Photonic Crystal Lasers, Praveen K.J. Singaravelu, Sharon M. Butler, Robert N. Sheehan, Alexandros A. Liles, Stephen P. Hegarty, Liam O'Faolain

Cappa Publications

We present a design methodology for hybrid lasers to realise mode-hop free operation by controlling the cavity mode spacing. In this study, a compact hybrid photonic crystal laser (H-PhCL) was employed which allowed a reduction of the Fabry–Perot length of the laser cavity and eliminated the need for an active mode stabilisation mechanism in order to realise mode-hop free operation. The H-PhCL was formed by butt-coupling a reflective semiconductor optical amplifier (RSOA) with a two-dimensional silicon (Si) photonic crystal (PhC) cavity. Continuous stable single frequency operation with >40 dB side-mode suppression ratio (SMSR) of the laser was achieved for gain …

Spectral Singularities With Directional Sensitivity, Hamidreza Ramezani

Physics & Astronomy Faculty Publications

We propose a class of spectral singularities that are sensitive to the direction of excitation and arise in nonlinear systems with broken parity symmetry. These spectral singularities are sensitive to the direction of the incident beam and result in diverging transmission and reflection for the left (right) incident, while the transmission and reflection of the right (left) side of the system remain finite. For the pedagogical reason, first we review the scattering formalism in nonlinear systems using an abstract δ-function model. Then, using a parity symmetry broken nonlinear system consisting of two δ functions, one linear and the other nonlinear, …

Dynamics Of A Swept Source Laser Under External Injection, Uday Bangavadi Munivenkatappa

Theses

Swept Sources are lasers with a periodically modulated frequency, over a wide scanning range. They are widely used in Optical Coherence Tomography (OCT) for medical imaging and metrology. The narrow instantaneous linewidth of a swept source is required for longer OCT imaging depths. The goal of the project is to investigate the mechanism that deteriorates the coherence of a swept-source laser by analyzing its properties under external injection and investigate the possibilities for a phase-locked laser operation, in order to control the coherence properties. The laser under study was a semiconductor ring fiber-based cavity laser, incorporating a tunable narrow transmission …

Fabrication Of Metal-Silicon Nanostructures By Reactive Laser Ablation In Liquid, Eric J. Broadhead

Theses and Dissertations

Metal-silicon nanostructures are a growing area of research due to their applications in multiple fields such as biosensing and catalysis. In addition, silicon can provide strong support effects to metal nanoparticles while being more cost effective than traditionally used supports, like titania. Traditional wet-chemical methods are capable of synthesizing metal-silicon nanostructures with a variety of composition and nanoparticle shapes, but they often require high temperatures, toxic solvents, strong reducing agents, or need capping agents added to stabilize the nanoparticles. Laser processing is an emerging technique capable of synthesizing metal-silicon composite surfaces that offers a faster, simpler, and greener synthesis route …

Radiation-Balanced Fiber Lasers And Amplifiers, Esmaeil Mobini Souchelmaei Mr

Optical Science and Engineering ETDs

Over the past decades, high-power fiber lasers and amplifiers have been extensively under research to achieve higher output powers. However, temperature rise in the core of fiber lasers and amplifiers has been a big issue in power-scaling. Radiation-balancing is a viable technique introduced for effective heat mitigation in lasers and amplifiers by S. Bowman in 1995. Radiation-balancing relies on solid-state laser cooling as a self-cooling mechanism to mitigate the generated heat in lasers and amplifiers. To implement the mentioned idea in fiber lasers and amplifiers, a set of issues should be scrutinized; (i) the amenability of silica glass (as the …

Laser Diodes In Photoacoustic Flow Cytometry For Detection Of Particles And Cells, Hind Jasim Jawad

Theses and Dissertations

Photoacoustic (PA) flow cytometry (PAFC) is a powerful diagnostic method that has vast potential in clinical diagnosis of cancer, infections, and cardiovascular disorders by providing highly sensitive detection and enumeration of individual circulating cells or particles associated with presence and progression of a disease. This promising diagnostic tool commonly uses solid-state lasers as the illuminating light sources. However, these lasers are usually expensive and bulky, limiting their usage in many clinical applications. Low-cost, portable, high-power pulsed diode lasers can be used as potential alternative sources for PAFC due to their high efficiency, and availability in a wide spectral range of …

An Overview Of Lasers And Their Applications, Luis Cristian Giovanni Guerrero

Physics

This paper is an overview of lasers and their applications. The fundamentals of laser operation are covered as well as the various applications of advanced laser systems. The primary focus is to highlight some of the technological advancements made possible by lasers in the last half-century.

Structuring Light For Investigating Optical Vortices, Andrew Voitiv, Mark Siemens

DU Undergraduate Research Journal Archive

Vortices are well known in our world: tornadoes, hurricanes, and quickly stirred iced tea all demonstrate the vortex phenomenon. In addition to these classical fluids, vortices exist in laser light. While classical fluid vortex dynamics is one of the oldest studied physics problems, the study of optical vortices is only a few decades old. Paralleling the community’s curiosity of quantized vortices in quantum fluids, such as super fluid helium and Bose-Einstein condensate, there is immense interest in the study of optical vortices. In this article, we cover the basic theory of structuring light to generate optical vortices and then discuss …

Characterizing Complexity In A Semiconductor With Optical Feedback From Two Mirrors, Layla M. Abrams

2020 Symposium Posters

Lasers are stable devices with a broad spectrum of applications. They can be perturbed to induce complex dynamics in their output intensity. One interesting regime in semiconductor lasers is that the output intensity of the laser emits a sequence of non-regular optical spikes. This behavior resembles that of neurons. We use a semiconductor laser with optical feedback from two mirrors to characterize the behavior of the laser's power output. The data is then analyzed by transforming the intensity time series into a sequence of patterns or words. By doing this we want to explore how the laser changes its preferred …

Polarization Properties Of Airy And Ince-Gaussian Laser Beams, Sean Michael Nomoto

Graduate Theses and Dissertations

The description of polarization states of laser light as linear, circular polarization within the paraxial scalar wave approximation is adequate for most applications. However, this description falls short when considering laser light as an electromagnetic wave satisfying Maxwell's equations. An electric field with a constant unit vector for direction of the field and a space dependent complex scalar amplitude in the paraxial wave approximation does not satisfy Maxwell equations which, in general, requires all three Cartesian components of electric and magnetic fields associated for a nonzero laser beam to be nonzero.

Physical observation of passing a linearly polarized laser through …

Lasers, Noah B. Caro

Physics

No abstract provided.

Carbon Multicharged Ion Generation From Laser-Spark Ion Source, Md. Mahmudur Rahman, Oguzhan Balki, Hani E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Multicharged carbon ions are generated by using a laser-assisted spark-discharge ion source. A Q-switched Nd:YAG laser pulse (1064 nm, 7 ns, ≤ 4.5 × 10⁹ W/cm²) focused onto the surface of a glassy carbon target results in its ablation. The spark-discharge (∼1.2 J energy, ∼1 µs duration) is initiated along the direction of the plume propagation between the target surface and a grounded mesh that is parallel to the target surface. Ions emitted from the laser-spark plasma are detected by their time-of-flight using a Faraday cup. The ion energy-to-charge ratio is analyzed by a three-mesh retarding field …

Improving Performance Of Inverse Compton Sources Through Laser Chirping, Balsa Terzić, A. Brown, I. Drebot, T. Hagerman, E. Johnson, Geoffrey A. Krafft, C. Maroli, V. Petrillo, M. Ruijter

Physics Faculty Publications

We present a new method for computation of radiation spectra in the non-linear regime of operation of inverse Compton sources characterized by high laser intensities. The resulting simulations agree well with the experiments. Increasing the laser intensity changes the longitudinal velocity of the electrons during their collision, leading to considerable non-linear broadening in the scattered radiation spectra. The effects of such ponderomotive broadening are so deleterious that most inverse Compton sources either remain at low laser intensities or pay a steep price to operate at a small fraction of the physically possible peak spectral output. This ponderomotive broadening can be …

Spectroscopy Of Neon For The Advanced Undergraduate Laboratory, H. C. Busch, M. B. Cooper, C. I. Sukenik

Physics Faculty Publications

We describe a spectroscopy experiment, suitable for upper-division laboratory courses, that investigates saturated absorption spectroscopy and polarization spectroscopy in a neon discharge. Both experiments use nearly identical components, allowing students to explore both techniques in a single apparatus. Furthermore, because the wavelength of the laser is in the visible part of the spectrum (640 nm), the experiment is well-suited for students with limited experience in optical alignment. The labs nicely complement a course in atomic or plasma physics, provide students with the opportunity to gain important technical skills in the area of optics and lasers, and can provide an introduction …

Argon Metastable And Resonant Level Densities In Ar And Ar/Cl² Discharges Used For The Processing Of Bulk Niobium, Jeremy Peshl, Roderick Mcneill, Charles I. Sukenik, Milka Nikolić, Svetozar Popović, Leposava Vŭsković

Physics Faculty Publications

A comparative analysis of two popular spectroscopy techniques is conducted in a coaxial cylindrical capacitively coupled discharge designed for the plasma processing of superconducting radio frequency (SRF) cavities. The density of the metastable and resonant levels in Ar is measured in both Ar and Ar/Cl₂ discharges to properly characterize the unique discharge system and aid in the development of a cavity etching routine. The first method, deemed the “branching fraction method,” utilizes the sensitivity of photon reabsorption of radiative decay to measure the lower state (metastable and resonant) densities by taking ratios of spectral lines with a common upper …

Thermally Stable Hybrid Cavity Laser Based On Silicon Nitride Gratings, Simone Iadanza, Andrei P. Bakoz, Praveen K. J. Singaravelu, Danilo Panettieri, Stefan Schulz, Ganga Chinna Rao Devarapu, Sylvain Guerber, Charles Baudot, Frédéric Boeuf, Stephen Hegarty, Liam O'Faolain

Cappa Publications

In this paper, we show the experimental results of a thermally stable Si3N4 external cavity (SiN EC) laser with high power output and the lowest SiN EC laser threshold to our knowledge. The device consists of a 250 μm sized reflective semiconductor optical amplifier butt-coupled to a passive chip based on a series of Si3N4 Bragg gratings acting as narrow reflectors. A threshold of 12 mA has been achieved, with a typical side-mode suppression ratio of 45 dB and measured power output higher than 3 mW. Furthermore, we achieved a mode-hop free-lasing regime in the range of 15–62 mA and …

Precision Spectroscopy Of Beryllium, Advik D. Vira

Theses, Dissertations, and Projects

We report on the calibration and absolute frequency results for the 2s2p1P1 state in neutral atomic beryllium-9. We start off with a discussion of the method used to calibrate the laser, which includes a detailed explanation of the basic physics involved, and then discuss the results for the lowest singlet state in neutral beryllium-9. We discuss a way to predict the spectra using optical Bloch equations and then present and analyze the experimental results. We found the absolute frequency for the 1P1 state to be 42565.4487(30) cm-1, which is in agreement with the current best theoretical estimateof42565.441(11)cm-1 [49]. Amoresophisticatedanalyticaltechniqueisproposed; however, …

Two-Photon Excitation Of Cesium Alkali Metal Vapor 72D, 82D Kinetics And Spectroscopy, Ricardo C. Davila

Theses and Dissertations

Pulsed excitation on the two-photon Cs 6²S_½ → 7²D_3/2,5/2 transition results in time-resolved fluorescence at 697 nm and 672 nm. The rates for fine structure mixing between the 7²D_3/2,5/2 states have been measured for helium and argon rare gas collision partners. The mixing rates are very fast, 1.26 ± 0.05 x 10^-9 cm³/(atom sec) for He and 1.52 ± 0.05 x 10^-10 cm³ /(atom sec) for Ar, driven by the small energy splitting and large radial distribution for the valence electron. …

Three Ways To Stabilize An Injection Lock, Ethan Welch, Dallin Durfee, Jarom Jackson

Student Works

An injection locked laser can jump out of lock if its current or temperature drifts. By monitoring the spectra or the amplitude of the injection locked laser, we have been able to detect drifts and apply feedback to prevent injection lock from breaking.

Recent Advances In Electronic And Optoelectronic Devices Based On Two-Dimensional Transition Metal Dichalcogenides, Mingxiao Ye, Dongyan Zhang, Yoke Khin Yap

Department of Physics Publications

Two-dimensional transition metal dichalcogenides (2D TMDCs) offer several attractive features for use in next-generation electronic and optoelectronic devices. Device applications of TMDCs have gained much research interest, and significant advancement has been recorded. In this review, the overall research advancement in electronic and optoelectronic devices based on TMDCs are summarized and discussed. In particular, we focus on evaluating field effect transistors (FETs), photovoltaic cells, light-emitting diodes (LEDs), photodetectors, lasers, and integrated circuits (ICs) using TMDCs.

Using An Atomic Molecular Optics Laboratory For Undergraduate Research And Mentoring Of Physics Students In Georgia, Matthew P. Dallas

Georgia College Student Research Events

Using an Atomic Molecular Optics Laboratory for Undergraduate Research and Mentoring of Physics Students in Georgia

An Atomic and Molecular Optical (AMO) Physics research lab is an excellent tool to train and mentor undergraduate students in advanced laboratory techniques. Students gain valuable basic experience in experimental designs, data acquisition techniques, working with high precision optical equipment, building electronics, and working in the machine shop. The current project is building and testing an enclosure for the diode laser to reduce sound and vibrational interference. In addition, we are developing and evaluating a new, more compact laser cavity which is 3d printed. …