Physics Commons^™

Imaging An Aligned Polyatomic Molecule With Laser-Induced Electron Diffraction, Michael G. Pullen, Benjamin Wolter, Anh-Thu Le, Matthias Baudisch, Michael Hemmer, Arne Senftleben, Claus Dieter Schroeter, Joachim Ullrich, Robert Moshammer, C. D. Lin, Jens Biegert

Physics Faculty Research & Creative Works

Laser-induced electron diffraction is an evolving tabletop method that aims to image ultrafast structural changes in gas-phase polyatomic molecules with sub-Ångström spatial and femtosecond temporal resolutions. Here we demonstrate the retrieval of multiple bond lengths from a polyatomic molecule by simultaneously measuring the C-C and C-H bond lengths in aligned acetylene. Our approach takes the method beyond the hitherto achieved imaging of simple diatomic molecules and is based on the combination of a 160kHz mid-infrared few-cycle laser source with full three-dimensional electron-ion coincidence detection. Our technique provides an accessible and robust route towards imaging ultrafast processes in complex gas-phase molecules …

Construction And Optimization Of A Tapered Amplifier System For Applications In Ultra-Cold Plasma Research, Ryan Cole

Honors Theses

The number density of cold atoms confined in a magneto-optical trap (MOT) is critically dependent on the intensity of the lasers used to cool the sample. To generate large optical powers while retaining the practicality of homemade external cavity diode lasers (ECDLs), a tapered amplifier (TA) system was designed and constructed to amplify the output of an existing 780 nm, continuous-wave ECDL. The amplifier’s performance is discussed in terms of its gain and power output. Under standard operating conditions, optical amplification of 12 dB is achieved, with a maximum power output of 0.75 W. The completed amplifier is installed into …

Barium Concentrations In Rock Salt By Laser Induced Breakdown Spectroscopy, Kiley J. Spirito

Dissertations, Master's Theses and Master's Reports - Open

Time-REsolved Laser Induced Breakdown Spectroscopy (TRELIBS) was used to determine the elemental concentration of barium in Texas Dome rock salt. TRELIBS allows for an efficient and in situ concentration analysis technique that detects a wide range of elements with no sample preparation.

TRELIBS measurements were made in the 545nm to 594nm wavelength range. The proximity of a strong barium emission line (553.5481 nm) to the sodium doublet (588.9950 nm and 589.5924 nm) allowed for measurement within a single frame of the spectrograph.

This barium emission line was compared to the sodium doublet for relative intensity. A homemade calibration sample containing …

Universality Of Returning Electron Wave Packet In High-Order Harmonic Generation With Midinfrared Laser Pulses, Anh-Thu Le, Hui Wei, Cheng Jin, Vu Ngoc Tuoc, Toru Morishita, C. D. Lin

Physics Faculty Research & Creative Works

We show that a returning electron wave packet in high-order harmonic generation (HHG) with midinfrared laser pulses converges to a universal limit for a laser wavelength above about 3µm. The results are consistent among the different methods: a numerical solution of the time-dependent Schrödinger equation, the strong-field approximation, and the quantum orbits theory. We further analyze how the contribution from different electron "trajectories" survives the macroscopic propagation in the medium. Our result thus provides a new framework for investigating the wavelength scaling law for the HHG yields.

Waveforms For Optimal Sub-Kev High-Order Harmonics With Synthesized Two- Or Three-Colour Laser Fields, Cheng Jin, Guoli Wang, Hui Wei, Anh-Thu Le, C. D. Lin

Physics Faculty Research & Creative Works

High-order harmonics extending to the X-ray region generated in a gas medium by intense lasers offer the potential for providing tabletop broadband light sources but so far are limited by their low conversion efficiency. Here we show that harmonics can be enhanced by one to two orders of magnitude without an increase in the total laser power if the laser's waveform is optimized by synthesizing two- or three-colour fields. The harmonics thus generated are also favourably phase-matched so that radiation is efficiently built up in the gas medium. Our results, combined with the emerging intense high-repetition MHz lasers, promise to …

The Talbot Effect, Malia Kawamura

Honors Theses

The goal of this project is to experimentally investigate the optical Talbot effect and the electron Talbot effect. The Talbot effect is a near-field diffraction effect which occurs when plane waves are incident upon a grating. The Talbot effect creates full grating revivals at integral Talbot lengths and revivals with greater spatial periodicity at fractional Talbot lengths. We use a green helium neon laser and Ronchi rulings to take CCD camera images of the fractional Talbot revivals directly. Additionally, a photodiode records light intensity as a function of time as a second identical grating is moved to verify the presence …

Forcing Mutual Coherence In Diode Laser Stacks, Jonathan R. Wurtz

Honors Theses and Capstones

This paper will discuss both theoretical and experimental attempts to improve the spatial beam quality of diode laser stacks using an external optical system. An overview and derivation of the mathematics of both the optical system and diode lasers will be discussed. The experimental setup will be presented, as well as the fundamental theoretical and experimental results that suggest the external optical system used for this thesis fails to improve the beam quality of a diode laser stack.

Integration Of Instrumentation And Processing Software Of A Laser Speckle Contrast Imaging System, Jacob James Carrick

Dissertations, Master's Theses and Master's Reports - Open

Laser speckle contrast imaging (LSCI) has the potential to be a powerful tool in medicine, but more research in the field is required so it can be used properly. To help in the progression of Michigan Tech's research in the field, a graphical user interface (GUI) was designed in Matlab to control the instrumentation of the experiments as well as process the raw speckle images into contrast images while they are being acquired. The design of the system was successful and is currently being used by Michigan Tech's Biomedical Engineering department. This thesis describes the development of the LSCI GUI …

Optimization Of Laser Marking With The Help Of Simulation Models, Lyubomir Kostadimov Lazov, Nikolay Angelov Petrov

Turkish Journal of Physics

This article covers the results of several numerical experiments carried out with specific software working under MATLAB for marking of tool steel and electronic elements. CuBr and Nd:YAG lasers were used in this study. Simulations with 3 different durations of pulse of laser radiation were achieved. Numerical calculations were performed with values (for laser sources and technological parameters) based on real experiments.

Numerical Experiments For Determining Laser-Induced Temperature Fields, Lyubomir Kostadinov Lazov, Nikolay Angelov Petrov

Turkish Journal of Physics

Based on the equation of energy balance and the equation of heat conductivity with the help of specialized software, tentative engineering calculations were performed for the process of laser marking by melting and structural changes. The functional capabilities of the software product were examined. Distribution of temperature by layers for samples of tool steel was obtained.

Properties Of High Energy Laser Light Transmission Through Large Core Optical Cables, Christopher Kennedy

Electronic Theses and Dissertations

Laser induced damage is of interest in studying the transmission of large amounts of optical energy through step-index, large core multimode fibers. Optical fibers often have to be routed around objects when laser light is being transmitted between two locations which require the fiber to bend into a curve. Depending on how tight the bend is, this can result in transmission losses or even catastrophic damage when the energy density of the laser pulse exceeds the damage threshold of silica glass. The purpose of this study is to: Establish a minimum bend radius that would allow high energy (GW/cm2 ) …

Dynamic Feedback Pulse Shaping For High Power Chirped Pulse Amplification System, Dat Nguyen

Electronic Theses and Dissertations

The topic of this proposal is the development of high peak power laser sources with a focus on linearly chirped pulse laser sources. In the past decade chirped optical pulses have found a plethora of applications such as photonic analog-to-digital conversion, optical coherence tomography, laser ranging, etc. This dissertation analyzes the aforementioned applications of linearly chirped pulses and their technical requirements, as well as the performance of previously demonstrated parabolic pulse shaping approaches. The experimental research addresses the topic of parabolic pulse generation in two distinct ways. First, pulse shaping technique involving a time domain approach is presented, that results …

Commissioning Of The Asta Laser Lab With Uv Pulse Length Characterization, Daniel Kelley, Jeff Corbett

STAR Program Research Presentations

The Linac Coherent Light Source (LCLS) at SLAC depends on a photocathode electron gun to provide the linear accelerator with the raw material – electrons – used for making X-ray laser pulses. The photocathode used in the LCLS Injector is a clean copper plate in high vacuum. When the cathode is struck with high energy UV light, electrons are liberated from its surface and then accelerated down the linac with radio-frequency electric fields. These fast-moving bunches of electrons are directed through an undulator magnet to radiate X-ray light.

Although scientists have been using photocathode techniques at SLAC for 25 years, …

Building And Characterization Of Laser Diodes As Well As System Design Of A Dual Wavelength Fabry-Perot Interferometer, Nicholas Czapla

Physics

No abstract provided.

Ultrafast Intense-Field Photoionization And Photofragmentation Of Systematic Series Of Substituted Organic Molecules, Timothy D. Scarborough

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

The abundance and relevance of organic molecules similar to benzene makes their study important. Studying the interactions of such molecules with intense light fields has implications for the generation of short-wavelength radiation, attosecond science, high-harmonic generation, and many other fields. However, the computing power necessary to complete fully ab initio calculations describing molecules of this size does not exist; this leaves theoretical studies to rely on assumptions and approximations just to calculate the energies of the ground state. Including any sort of dynamics in these calculations is prohibitively complicated, and this makes experimental observations important. Since many organic molecules are …

Characterization And Application Of Isolated Attosecond Pulses, Michael Chini

Electronic Theses and Dissertations

Tracking and controlling the dynamic evolution of matter under the influence of external fields is among the most fundamental goals of physics. In the microcosm, the motion of electrons follows the laws of quantum mechanics and evolves on the timescale set by the atomic unit of time, 24 attoseconds. While only a few time-dependent quantum mechanical systems can be solved theoretically, recent advances in the generation, characterization, and application of isolated attosecond pulses and few-cycle femtosecond lasers have given experimentalists the necessary tools for dynamic measurements on these systems. However, pioneering studies in attosecond science have so far been limited …

Assessing Laser Lifetime Test Performance, Joe Weichman, Hamid Hemmati, Malcolm Wright

STAR Program Research Presentations

Assessing expected component lifetime is necessary in developing instruments for future space-flight projects to ensure long term operation in the challenging environment. Although semiconductor diode lasers have widespread use in terrestrial applications, their use in space is still an emerging technology that requires on-going testing to demonstrate their capability. The project called for re-establishing the test setup for assessing lifetime performance of 20 continuously running 200mW 830 nm diode lasers. These lasers underwent previous testing based on parameters for NuSTAR’s laser metrology system, and met the six month lifetime project requirements under nominal operating conditions. Laser testing is currently underway …

Laser-Induced Breakdown Spectroscopy, Connor Drake

Physics

The goal of this work is to use a Neodymium-Doped Yttrium Aluminum Garnet (Nd:YAG) Laser, spectrometer, and computer to create a Laser Induced Breakdown Spectroscopy (LIBS) system. LIBS utilizes a focused, high-powered, pulsed laser whose peak electric field ionizes materials at the beam focal point, creating localized plasma.  The plasma state includes broken molecular bonds, atom/electron-ionization, and excited electrons, which on the macroscopic level is a loud “snap” and a bright spark. In this project, a fiber optic cable is used to capture light emitted from the spark, and direct it into a spectrometer which tallies the number of photons …

Laser-Induced Breakdown Spectroscopy (Libs): An Innovative Tool For Studying Bacteria, Qassem I. Mohaidat

Wayne State University Dissertations

Laser-induced breakdown spectroscopy (LIBS) has gained a reputation as a flexible and convenient technique for rapidly determining the elemental composition of samples with minimal or no sample preparation. In this dissertation, I will describe the benefits of using LIBS for the rapid discrimination and identification of bacteria (both pathogenic and non-pathogenic) based on the relative concentration of trace inorganic elements such as Mg, P, Ca, and Na. The speed, portability, and robustness of the technique suggest that LIBS may be applicable as a rapid point-of-care medical diagnostic technology.

LIBS spectra of multiple genera of bacteria such as Escherichia, Streptococcus, Mycobacterium, …

Simultaneous Higher Harmonic Detection And Extraction Of Information From Oxygen Spectra, Karan Dineshchandra Mohan

Electrical & Computer Engineering Theses & Dissertations

Wavelength Modulation Spectroscopy (WMS) is a highly sensitive technique that utilizes synchronous detection at the N-th harmonics of a modulating frequency, by modulating the laser beam used to probe a gaseous species. The advantage of this technique lies in the greater effective signal-to-noise ratio one obtains as a direct consequence of the larger amount of structure present in the higher harmonics, and thus a greater amount of information that can be obtained from that structure. We present the development of a novel technique where data at multiple harmonics is obtained simultaneously, rather than sequentially. This removes the susceptibility of the …

The Development Of Scalable Pump Techniques For Gg Iag Fiber Lasers And Passive Athermalization Techniques For Solid State Laser, William Hageman

Electronic Theses and Dissertations

This dissertation consists of two parts: research pertaining to the development of scalable pump techniques for gain guided index-antiguided fiber lasers and research relating to the development of passive athermalization schemes for solid state lasers. The first section primarily details the development of a side pump scheme that allows for power scaling of gain-guided index anti-guided fibers. While these fibers have been demonstrated in past research, none have used a pump technology capable of pumping with the efficiencies, uniformity, and necessary length to allow for scaling of the fiber lasers to high output powers. The side pumped scheme developed in …

Constructing A Magneto-Optical Trap For Cold Atom Trapping, Eric S. Muckley

Physics

A magneto-optical trap, or MOT, is a device that traps atoms between three pairs of opposing perpendicular laser beams for cooling the atoms to temperatures near absolute zero. The MOT uses Doppler cooling and a magnetic quadrupole field to trap the atoms; in our case, Rb87 atoms. In the future, the MOT will be used in experiments pertaining to the advancement of quantum computing. In this paper, I explain some of the processes required for construction and operation of the MOT.

Power Scaling Of Large Mode Area Thulium Fiber Lasers In Various Spectral And Temporal Regimes, Timothy Mccomb

Electronic Theses and Dissertations

High power thulium fiber lasers are interesting for a myriad of applications due to their potential for high average output power, excellent beam quality, compactness, portability, high operating efficiency and broad, eye-safe spectral range from 1.8-2.1 microns. Currently, the majority of thulium laser research effort is being invested into scaling average output powers; however, such output powers are being scaled with no degree of control on laser system output spectrum or temporal behavior. Thulium fiber laser technology is not useful for many of its most important applications without implementation of techniques enabling tunable, narrow spectral widths with appropriate pulse durations …

Mode Dercalization In 1d Photonic Crystal Lasers, Yeheng Wu, Kenneth D. Singer, Rolfe G. Petschek, Hyunmin Song, Eric Baer, Anne Hiltner

Faculty Scholarship

We have investigated the formation of in-bandgap delocalized modes due to random lattice disorder as determined from the longitudinal mode spacing in a distributed Bragg laser. We were able to measure the penetration depth, and from transfer matrix simulations, determine how the localization length is altered for disordered lattices. Transfer matrix simulations and studies of the ensemble average were able to connect the gap delocalized modes to localized modes outside of the gap as expected from consideration of Anderson localization, as well as identify the controlling parameters.

Design And Fabrication Of Space Variant Micro Optical Elements, Pradeep Srinivasan

Electronic Theses and Dissertations

A wide range of applications currently utilize conventional optical elements to individually transform the phase, polarization, and spectral transmission/reflection of the incident radiation to realize the desired system level function. The material properties and the feasibility of fabrication primarily impact the device and system functionality that can be realized. With the advancement in micro/nano patterning, growth, deposition and etching technology, devices with novel and multiplexed optical functionalities have become feasible. As a result, it has become possible to engineer the device response in the near and far field by controlling the phase, polarization or spectral response at the micro scale. …

In Situ Measurement Of Three-Dimensional Ion Densities In Focused Femtosecond Pulses, James Strohaber, Cornelis J. Uiterwaal

Department of Physics and Astronomy: Dissertations, Theses, and Student Research

We image spatial distribution of xenon ions in the focus of a laser beam of ultrashort, intense pulses in all three dimensions, with a resolution of three by twelve microns in the two transverse directions. This allows for studying ionization processes without spatially averaging ion yields. Our in situ ion imaging is also useful to analyze focal intensity profiles and to investigate the transverse modal purity of tightly focused beams of complex light. As an example, the intensity profile of a Hermite-Gaussian beam mode HG recorded with ions is found to be in good agreement with optical images.

Interactions Of Electrons And Rydberg Atoms In Ultra-Cold Plasmas, Cristian Vesa

Honors Theses

This thesis discusses an experimental technique for investigating electron temperature control by Rydberg atoms in ultra-cold plasmas. The objective we set ourselves was twofold. Firstly, we sought to gain an insight into the processes whereby the creation of Rydberg atoms within the plasma lengthens the lifetime of the plasma. To this end, we created the plasma using a Littman dye laser and subsequently, at a variable time delay, we excited neutral atoms in the plasma to specific Rydberg states using a narrow bandwidth pulsed dye laser. Secondly, we employed radio-frequency (rf) electric fields to excite electron oscillations within the plasma …

Monte Carlo Simulation Of Hole Transport And Terahertz Amplification In Multilayer Delta Doped Semiconductor Structures, Maxim Dolguikh

Electronic Theses and Dissertations

Monte Carlo method for the simulation of hole dynamics in degenerate valence subbands of cubic semiconductors is developed. All possible intra- and inter-subband scattering rates are theoretically calculated for Ge, Si, and GaAs. A far-infrared laser concept based on intersubband transitions of holes in p-type periodically delta-doped semiconductor films is studied using numerical Monte-Carlo simulation of hot hole dynamics. The considered device consists of monocrystalline pure Ge layers periodically interleaved with delta-doped layers and operates with vertical or in-plane hole transport in the presence of a perpendicular in-plane magnetic field. Inversion population on intersubband transitions arises due to light hole …

Measurement And Characterization Of Microwave Transient Electromagnetic Fields Generated From Laser/Matter Interaction, Nicholas Barbieri

Electronic Theses and Dissertations

From past experiments conducted with high intensity lasers, it has been known for some time that laser matter interactions result in the emission of short, transient electromagnetic pulses. Previous investigations into laser generated electromagnetic pulses provide basic information regarding frequencies where such pulses may be present, along with the time duration of the pulses. Such investigations have also demonstrated a number of measurement techniques in which basic information on the pulses may be obtained. The purpose of this current investigation is to obtain a more thorough description and understands of electromagnetic pulses generated for laser matter interaction. To this end, …

The Effects Of Electrode Geometry On Current Pulse Caused By Electrical Discharge Over An Ultra-Fast Laser Filament, Matthew Bubelnik

Electronic Theses and Dissertations

The time-resolved electrical conductivity of a short-pulse generated plasma filament in air was studied. Close-coupled metal electrodes were used to discharge the stored energy of a high-voltage capacitor and the resulting microsecond-scale electrical discharge was measured using fast current sensors. Significant differences in the time dependence of the current were seen with the two electrode geometries used. Using sharp-tipped electrodes additional peaks in the time-resolved conductivity were seen, relative to the single peak seen with spherical electrodes. We attribute these additional features to secondary electron collisional ionization brought about by field enhancement at the tips. Additional discrepancies in the currents …