Physics Commons^™

Development Of E-Lkpd Assisted By Phet Colorado Basedon Discovery Learning: Critical Thinking Skills On Lightmaterial At Junior High School, Flora Yani Saragih, Pintor Simamora

Jurnal Pendidikan Sains

Critical thinking is necessary for 21st-century pupils, but PISA data suggest that Indonesian students, especially junior high school students, lack it. The junior high science/physics light material is abstract and involves in-depth reasoning (reflection, refraction, and shadow generation). Without critical thinking, kids memorize formulas or notions without analyzing real phenomena. Discovery learning involves pupils discovering concepts via observation and experimentation. Critical thinking requires initiative, exploration, and reasoning, which these foster. Therefore, this study aims to develop E-LKPD based on Discovery Learning assisted by an interactive simulation of PhET Colorado to strengthen the critical thinking skills of grade VIII students on …

Guided Inquiry Learning Assisted By Crossword Puzzlemedia: Student Scientific Literacy And Critical Thinkingability For Middle School, Agis Putri Niswa, Mariati Purnama Simanjuntak, Ramlan Silaban, Fauziyah Harahap, Ridwan Abdullah Sani

Jurnal Pendidikan Sains

Scientific literacy and critical thinking skills are two fundamental competencies that students need in the 21st century. Scientific literacy is essential for students to understand and use scientific knowledge to make informed decisions, while critical thinking trains students to analyze information, evaluate arguments, and solve problems logically. Therefore, the intent of this study was to determine the effect of the guided inquiry learning model assisted by crossword puzzle media on students’ scientific literacy and critical thinking skills. The type of research used was quasi-experimental with a two-group pretest-posttest design. The sample consisted of two classes: class VII-8 as the control …

Enzymes Of Calendula Officinalis L. As Affected By Foliar Application Of Nano-Nitrogen And Potassium Fertilizers, Under Water Stress Conditions, Aqeel Abdulabbas Alsudani, Qais Hussain Abbas Al-Semmak

Karbala International Journal of Modern Science

Water stress is a major environmental factor that limits the growth and productivity of Calendula officinalis L. To alleviate its negative effects, recent approaches have increasingly focused on nano-fertilizers that enhance plant antioxidant defenses. This study therefore aimed to evaluate the effect of foliar application of nano-nitrogen (0, 2, and 4 mL L⁻¹) and nano-potassium (0, 2, and 4 g L⁻¹) fertilizers under two irrigation regimes (100% and 50% of field capacity) on the activity of key antioxidant enzymes, including catalase (CAT), superoxide dismutase (SOD), and peroxidase (POD). The results revealed that irrigation at 50% field capacity significantly increased CAT, …

Effect Of Au Nanoparticles Doping On The Structure, Surface Morphology And Optical Properties Of Znago Nanorods, Mohsin Talib Mohammed, Salah M. Saleh Al-Khazali, Bassam A. Salih, Adel H. Omran Alkhayatt

Karbala International Journal of Modern Science

In this work, nanoparticles (NPs) composed of noble elements (Au and Ag) were prepared using a chemical reduction method and then combined with a spray pyrolysis technique for synthesizing ZnAgO and Au-doped ZnAgO nanorods (NRs). The films were produced by adding 2 wt% of Ag NPs and 2, 4, and 6 wt% of Au NPs at 420°C. The results showed that the films have a polycrystalline ZnO (wurtzite) with a hexagonal structure. Also, all films had a preference orientation along the (002) plane. The crystal size increased with increasing Au doping from 64.4 to 65.33 nm. For ZnO doped with …

Collisional Excitation Of Hcn By Co To Refine The Modeling Of Cometary Comae, Francesca Tonolo, Ernesto Quintas-Sánchez, Adrian Batista-Planas, Richard Dawes, François Lique

Chemistry Faculty Research & Creative Works

We present the first dataset of collisional (de)-excitation rate coefficients of HCN induced by CO, one of the main perturbing gases in cometary atmospheres. The dataset spans the temperature range of 5–50 K. It includes both state-to-state rate coefficients involving the lowest ten and nine rotational levels of HCN and CO, respectively, and the so-called "thermalized" rate coefficients over the rotational population of CO at each kinetic temperature. The derivation of these coefficients exploited the good performance of the statistical adiabatic channel model (SACM) on top of an accurate interaction potential computed at the CCSD(T)-F12b/CBS level of theory. The reliability …

Needs Analysis Of Interactive Learning Media For Teachingheat Transfer In Physics: Students’ And Teachers’Perspectives, Rizki Eka Shintya, Ika Mustika Sari, Ida Kaniawati

Jurnal Pendidikan Sains

Heat transfer material in physics is known to be abstract. This study specifically analyzes the conceptual difficulties, and visualization needs specific to this material, which is different from the analysis of physics needs in general. This analysis does not only look for the need for traditional media but explicitly looks for the need for interactive media (simulation, animation, virtual laboratory). Therefore, this study aims to identify the need for interactive learning media in physics education, specifically in the teaching of heat transfer, from the perspective of students and teachers in West Java, Indonesia. Using a quantitative descriptive survey, data were …

Efficacy Of Teaching At The Right Level Approach Combined With The Problem-Based Learning Model On Science Learning Outcomes At Middle School, Heri Syahputra Azhar Panjaitan, Ryan Dwi Puspita

Jurnal Pendidikan Sains

This research seeks to evaluate the efficacy of the Teaching at the Right Level (TaRL) strategy in conjunction with the Problem-Based Learning (PBL) model on the scientific learning outcomes of eighth-grade students at middle school Islam Terpadu Khairul Imam. This research addresses the inadequate scientific problem-solving abilities and science learning outcomes of Indonesian students, necessitating a more interactive and individualized instructional technique. The methodology used is a quasi-experimental design with a nonequivalent control group. The sample included two purposively chosen eighth-grade classes: one experimental class (n=25) underwent the TaRL–PBL intervention, whereas the control class (n=25) simply used the lecture approach. …

Development Of Students Worksheet Based On Project-Based Learning To Train Critical Thinking Skills At Vocational High School, Dia Ayu Permatasari, Harun Nasruddin

Jurnal Pendidikan Sains

Critical thinking is a cognitive skill that helps identify problems and generate solutions, leading to logical decisions or considerations for solving those problems. Students' critical thinking skills can be trained through learning activities to further improve students' critical thinking skills with learning tools. Therefore, this research intends to produce a student worksheet based on project-based learning to train students' critical thinking skills on the colligative properties of solutions. The development research uses the 4D development model from Thiagarajan, limited to the development stage. A limited trial was conducted with 30 students of industrial chemical engineering expertise at Vocational High School …

Development Of Digital Comic Learning Media Based On Mobile Learning On Media: Making Media Materials In Plant Tissue Culture, Sufina Intan Pertiwi, Fauziyah Harahap, Aline Gusti Yolanda Harahap, Marsya Amira Indrawati, Aline Jelita Christiani Simanullang, Yanda Febry Gracea Br Tarigan, Maureen Efriyanti Sitinjak

Jurnal Pendidikan Sains

his research was conducted based on student needs analysis, analysis of learner characteristics, and curriculum analysis, namely the lack of visualization and presentation of concepts and the lack of utilization of interactive technology in the learning process on media material and media making in tissue culture for college students. This study intends to develop digital comic media based on mobile learning and making media materials in tissue culture. This research method used research and development (R&D) with the ADDIE model: analyze, design, develop, implement, and evaluate. The subjects of this study were students of the Department of Biology, Universitas Negeri …

Problem-Based Learning Assisted By Augmented Reality On The Respiratory System Topic: A Study Of Students’ Critical Thinking Skills And Learning Motivation, Nyimas Dilviana, Ade Yeti Nuryantini, Sumiyati Sa'adah

Jurnal Pendidikan Sains

This study aims to examine the effectiveness of the Problem-Based Learning (PBL) model assisted by Augmented Reality (AR) technology regarding the respiratory system in improving students’ critical thinking skills and learning motivation. The research method used was a quasi-experimental design with a one-group pretest-posttest model. The subjects were 30 eleventh-grade students from a public high school in Garut City. Research instruments included a critical thinking test and a learning motivation questionnaire. The results showed a significant improvement in students’ critical thinking scores after the implementation of PBL with AR support. Additionally, learning motivation data analyzed from 16 statement items revealed …

Synthesis Of Nitrogen-Enriched 3d Graphene Foam For Electrochemical Sensing Of Hydrogen Peroxide (H₂O₂), Bhargavi Dronavalli, Madhava Rao Vallabhaneni, Jatla Murali Prakash, Deepti Kolli, Dandamudi Srilaxmi

Karbala International Journal of Modern Science

In this work, A simple hydrothermal process was utilized to create 3D-foam-type Nitrogen-doped graphene (NDG). The synthesized material was characterized using a range of physicochemical characterization techniques. These techniques confirm that nitrogen is successfully incorporated into the carbon network, resulting in NDG. Cyclic voltammetry (CV) investigation demonstrated that NDG-modified glassy carbon electrode (NDG/GCE) displayed finite charge transfer properties against typical redox systems. NDG/GCE is identified as a simple, facile, and efficient electrocatalyst material for the estimation of hydrogen peroxide (H₂O₂). From CV analysis, it is revealed that NDG/GCE can produce a signal for electrochemical quantification of …

Synthesis And Characterization Of Fe-Zn Bimetallic Nanoparticles Via Two-Step Laser Ablation And Their Antibacterial Activity, Hudhaifa M. Mohammed, Sahar Naji Rashid

Karbala International Journal of Modern Science

In this study, Nd: YAG laser at a wavelength of (1064 nm), energies of (300 and 400 mJ), and a pulse repetition rate of (3 Hz) was used to synthesize metallic nanoparticles from iron and zinc individually using a one-step pulsed laser ablation approach, followed by the two-step synthesis of bimetallic nanoparticles. The physical properties of the synthesized nanoparticles were then investigated using UV-visible (UV-Vis), X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and energy-dispersive X-ray (EDX) techniques. The results of characterization of the obtained NPs confirmed the formation of core-shell nanocomposites, as evidenced by the increased absorbance intensity of …

Effect Of Varying Chitosan Molecular Weights On The Morphology And Physical Characteristics Of Pva/Chitosan Composite Hydrogels, Yuan Alfinsyah Sihombing, Halida Rahmi Luthfianti, William Xaveriano Waresindo, Marathur Rodhiyah, Nur’Aini Nafisah, Dian Ahmad Hapidin, Dhewa Edikresnha, Khairurrijal Khairurrijal

Makara Journal of Science

We employed the innovative freeze–thaw method to investigate the effect of chitosan (CS) molecular weights incorporated into polyvinyl alcohol on the morphology and physical characteristics of the hydrogel. This study aimed to unravel the intricate relationships between CS molecular weight variations, CS concentration, and the number of freeze–thaw cycles (4 or 6 cycles) on hydrogel swelling degree and weight loss. Incorporating CS improved the hydrogel structure and enhanced its porosity, resulting in remarkable increases in swelling degree ranging from 2 to 6 times the initial weight. Higher molecular weight CS (310,000–375,000 Da) exhibited a lower swelling degree than medium molecular …

Enhancing Science Learning Outcomes With Sitaya Miniature Media: A Quantitative Study Of Elementary Education, Gilang Kripsiyadi Praramdana, Hamdan Hamdan, Agus Gunawan, Fauziah Dwi Hijriani

Jurnal Pendidikan Sains

This study investigates the impact of SITAYA Miniature media on the learning outcomes of grade VI students in science subjects at SDN 2 Darma. Conventional teaching methods, often less engaging for students, were identified as a significant factor contributing to low academic performance. The study employed a quantitative research approach, with a randomized sample of 43 students divided into an experimental group (24 students) and a control group (19 students). Pretest and posttest data were collected using a structured test instrument, and statistical analyses, including normality, homogeneity, t-tests, and N-Gain tests, were conducted to assess the effectiveness of SITAYA Miniature …

Green Synthesis Of Copper And Silver Nanostructured Particles From Eremurus Plant Extract And Comparison Of Their Optical Properties And Antibacterial Activities, Doaa Ayad Kamil, Ali F. Al-Rawaf, Mohammed Yarub Hani, H.H. Obeed, Tabarek Falah Deindee, Mohammed Ridha Shaeed

Karbala International Journal of Modern Science

In the present investigation, silver (Ag) and copper (Cu) nanostructured particles were synthesized from Eremurus plant by means of an environmentally benign methodology in which plant extracts served as both reducing and stabilizing agents. The resultant nanostructured particles were subjected to characterization techniques, including X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FESEM), and energy-dispersive X-ray spectroscopy (EDXS). XRD analysis confirmed development of Ag nanostructured particles with face-centered cubic (fcc) structure and also Cu nanostructured particles with cubic form. Moreover, the average crystallite dimensions obtained for Ag and Cu were 18.3 nm and 65.7 nm, …

Fabrication And Characterization Of Epoxy Resin Co-Doped With 2,5-Diphenyloxazole And Cerium Fluoride Nanoparticles For Radiation Detection, Akapong Phunpueok, Jaruwan Seangrit, Sarawut Jaiyen, Krittiya Sreebunpeng, Wuttichai Chaiphaksa, Kewalee Nilgumhang, Voranuch Thongpool

Karbala International Journal of Modern Science

This paper presents the fabrication and characterization of a plastic scintillator prepared from epoxy resin doped with 2,5-diphenyloxazole (PPO) and cerium fluoride nanoparticles (CeF₃ NPs) for radiation detection. The CeF₃ NPs were prepared by a chemical process and examined by X-ray diffraction (XRD) and scanning electron microscopy (SEM); it was found that the prepared particles were true CeF₃ NPs with an average particle size of approximately 17 nm. The CeF₃ NPs were co-doped with PPO into epoxy resin and formed into a plastic scintillator of 3 cm in diameter and 2 cm in length. Analysis of …

Hybrid Path Planner For Centralized Multi-Robotic Long-Vehicle Based On Adaptive Dimensionality And Grey Wolf Algorithm, Noor Kadhim Ayoob, Ali Hadi Hasan

Karbala International Journal of Modern Science

The present robot planning methods pay no attention to the impact of the robot's size and the space it occupies in the environment on path planning. This paper presents a centralized hybrid method to plan optimal paths for multiple robotic long vehicles (RLVs) competing with each other to reach one common goal, taking into account the space that must be available to the RLV at each step to avoid narrow spaces that are too small to pass through. The environment analysis for each RLV is improved by assigning constant weight to the obstacles and calculating two new parameters: safety (SF) …

Influence Of Variable Climate On Mechanical Properties Of Composite Materials: An Experimental Study, Alexandra Tazhibaeva, Safaa M.R.H. Hussein, Mikhail Kuznetsov, Farid Shakirzyanov, Nikita Kharin, Igor Muravyev, Timur Agliullin, Gulshat Saleeva, Victor Mitryakin, Oleg Morozov, Oskar Sachenkov

Karbala International Journal of Modern Science

This study investigates the degradation of carbon fiber-reinforced plastic composites, fabricated via non-autoclave molding, under tropical climatic conditions across three regions over three years. Forty specimens (10 control, 30 exposed) with 2x2 twill weave and 0°/90° fiber orientation were subjected to tensile and compressive testing, microscopy, and X-ray computed tomography. Control specimens established baseline properties, while exposed specimens underwent three-year weathering. Statistical and principal component analyses revealed significant mechanical degradation, with tensile strength decreasing by up to 16.1% (p

Impact Of Plasma-Activated Water On Breast Cancer Cell Viability, Maryam G. Jasim, Hammad R. Humud

Karbala International Journal of Modern Science

Plasma-activated water (PAW) was generated using a dielectric barrier discharge (DBD) plasma system operating with a 1:1 mixture of nitrogen and argon gases to evaluate its cytotoxic effects on MCF-7 breast cancer cells. Water samples were divided into five groups: 0 minutes (control), 5, 10, 15, and 20 minutes of plasma exposure. The resulting PAW was applied to cultured cells, and cell viability was assessed 24- and 48-hour post-treatment. Viability was evaluated using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The results showed an apparent time-dependent increase in cytotoxicity. At 24 hours, cell mortality rates were 1.9%, 40.7%, 48.1%, 53.6%, …

Low-Cost Cutaneous Protoporphyrin Ix (Ppix) Detection (Cpd) Device For Follow-Up Monitoring Of Patients After Photodynamic Therapy, Md Asaduzzaman Rasel

Graduate Masters Theses

Background: Photodynamic Therapy (PDT) utilizes specific wavelengths of light to activate photosensitizing chemical compounds, known as photosensitizers, which induce the generation of cytotoxic reactive oxygen species (ROS) for the targeted destruction of cancer cells. Among various photosensitizers for PDT, Protoporphyrin IX (PpIX) is widely employed in oncology and dermatology due to its natural in situ generation via the metabolic conversion of 5- aminolevulinic acid (ALA), a non-phototoxic prodrug. Systemic administration of ALA after 3-6 hr drug delay leads to peak PpIX accumulation in tissues, facilitating therapeutic and diagnostic applications. However, PpIX can persist in the skin for 24–48 hours post-treatment, …

Simulating Chemiluminescence Spectra Of Oh Radical Using Quantum Dynamical Simulations, Triet M. Cao

Research from the Berry Summer Thesis Institute, 2025

Chemiluminescence is a phenomenon of light emission that occurs when molecules transition from an excited state to the ground state. This phenomenon is widely utilized in applications ranging from quantifying product yields in chemical reactions to biological imaging and atmospheric chemistry studies. It has also been used in many crucial applications in the scarce conditions of heat and electricity, such as light sources for astronomy discovery or deep-sea diving. A notable example of such reactions is combustion, where highly reactive hydroxyl radicals (OH) are products. These radicals exhibit a chemiluminescence spectrum because of the interaction between their ground state and …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

64th Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 64th annual meeting of the Rocky Mountain Conference on Magnetic Resonance. Held in the Snowbird Resort and Conference Center, Snowbird, Utah, August 3-7, 2025.

Antifungal Peptides From Casein Milk Of Etawa Crossbreed (Capra Hircus) As Biopreservation Agent For Bread And Molecular Docking Studies, Dian Riana Ningsih, Winarto Haryadi, Rachma Wikandari, Tri Joko Raharjo

Karbala International Journal of Modern Science

Bread without peptide fraction treatment started to grow mold on the fourth day with a total of 24x10⁷ fungi colonies/ml. Meanwhile, the addition of peptide fractions GMC5, GMC6, GMC7, and GMC8 effectively preserved bread for up to 4 days, indicated by no mold growth. The best treatment was the GMC6 peptide fraction on day 8 which grew the least amount of fungus at 7x10⁷ spores/ml. Peptide interaction with the CaATPase receptor Aspergillus sp. was carried out using HADDOCK 2.4. The 3D CaATPase structure prediction resulted in a model with good structural quality. This was supported by residues in …

Insights Into The Radiation Chemistry Of Flash Radiation Therapy, Alan E. Lopez Hernandez

Dissertations and Theses (Open Access)

Purpose: FLASH radiation therapy (FLASH-RT) is an emerging modality that delivers radiation at ultra-high dose rates (UHDR) and has shown consistent normal tissue sparing while preserving tumor control compared to conventional RT—a phenomenon termed the FLASH effect. Despite promising results, the mechanisms behind the FLASH effect remain unclear. Many hypotheses point to radiolytic interactions, but experimental validation is limited. This work aims to develop a robust experimental platform to evaluate the relationship between radiolytic species production and physical beam parameters relevant to FLASH-RT, alongside dosimetry tools for reliable UHDR beam characterization.

Methods: A beam collector (BC) Faraday cup detector was …

Computational And In Vitro Investigation Of P. Crocatum Bioactive Compounds As Pancreatic Lipase Inhibitors, Gusnia Meilin Gholam, Dimas Andrianto, Dewi Anggraini Septaningsih, Mega Safithri

Karbala International Journal of Modern Science

Obesity, a prevalent metabolic disorder characterized by excessive fat accumulation, can severely affect overall health if left untreated. This study investigated the potential of a 70% ethanol extract from Piper crocatum (red betel) leaves as an in vitro inhibitor of pancreatic lipase (PL), supported by computational analyses to identify alternative compounds to orlistat. The phytochemical profile was characterized using LC-MS/MS, revealing alkaloids and terpenoids with contents of 1.1 ± 0.01 mg CE/g and 3.14 ± 0.3 mg UAE/g, respectively. The extract exhibited 49 ± 9.1% inhibition of PL activity. Molecular docking identified three promising compounds: calanolide A (10.43 kcal/mol), myricanone …

A Systematic Approach To The Characterization Of Liquid-Vapor Coexistence In Platinum, Meghan K. Lentz

Physics & Astronomy ETDs

Platinum is a material standard used in high pressure and shock compression experiments at Sandia National Laboratories. During experiments, materials are subjected to a very large range of thermodynamic conditions, during which materials regularly enter the liquid-vapor coexistence region. Despite its status as a standard, the region around the liquid-vapor critical point is poorly understood for platinum, with reported critical temperatures spanning approximately 7000 K. In this dissertation we conduct density functional theory based molecular dynamics (DFTMD) simulations for platinum for a range of temperatures and densities near liquid-vapor coexistence. The phase diagram for platinum is refined near the critical …