Numerical Analysis and Scientific Computing Commons^™

Track Deception Modeling Method Based On Multi-Jammer Cooperation, Wang Rui, Xiangyang Li, Zhili Zhang, Hongguang Ma

Journal of System Simulation

Abstract: The false track generated by the jammer formation is an effective interference measure against networked radars. This paper starts from the basic principle of false track generation and presents the model of the measurement error of the radar for the false track and the control error of the jammer formation. It also presents an analysis of the effects of these errors on the false track. The effectiveness of the false track is further analyzed through the confrontation scenario between the rectangular front formation of a certain type of equipment and networked radars. The simulation results show that the false …

Research On Supply Chain Recovery Strategy Under Disruption Risks, Yang Yi, Peng Chen, Yujiu Yang, Yulong Wang

Journal of System Simulation

Abstract: Aiming at supply chain disruptions, two effective supply chain recovery strategies are proposed, namely, a supplier’s preset emergency inventory strategy and a manufacturer’s product change strategy, meanwhile, emergency inventory storage cost and products return rate after change are also taken into consideration. In order to maximize the manufacturer’s profit and customer satisfaction, a single-objective model and a bi-objective model are established, respectively. The optimization problems in the two models are transformed into mixed integer programming problems, moreover, corresponding solution algorithms are presented based on ILOG CPLEX. The simulation results show that the disruption recovery strategies proposed can not only …

Radar Emitter Signal Identification Via Distance Features, Yingkun Huang, Weidong Jin, Yan Kang, Jiehao Zhu

Journal of System Simulation

Abstract: Aiming at the problem that traditional recognition methods of radar emitter signal have low accuracy in low signal to noise ratio (SNR) environment, and are usually suitable for only several specific radar signals, an identification approach of radar signal based on distance features is proposed. Several cluster centers are extracted via the k-means algorithm, and the Dynamic Time Warping (DTW) values between the radar signal and the cluster center are calculated respectively, which are combined as the input features of k-Nearest Neighbor (k-NN) algorithm. The simulation results show that when the SNR is 3 dB, the identification rate …

An Evolutionary Multi-Objective Simulation Optimization Algorithm For Supply Chain With Uncertain Demands, Hongfeng Wang, Yitian Zhang, Jingze Chen

Journal of System Simulation

Abstract: During the COVID-19 pandemic, supply chain of manufacturing companies is facing more severe product demand uncertainty, which is manifested in the sharp increase in demand for certain types of products and the increased fluctuations in supply for raw materials. For this supply chain optimization problem with demand uncertainty, a multi-objective stochastic programming model is developed in order to maximize the total profit and product order fulfillment rate simultaneously in this paper. For solving the investigated problem, a new evolutionary multi-objective simulation optimization algorithm is proposed by combining the mechanism of NSGA-II and simulation computing budget allocation adaptively. Experimental …

Research On Detection Data Driven Calibration Method Of Traffic Simulation Parameters, Wenxin Ma, Ruimin Li

Journal of System Simulation

Abstract: To improve the accuracy of traffic simulation model and timely response of traffic demand and driving behavior changes, dynamic calibration method of simulation parameters based on detection data is proposed. Dynamic interaction between detection data and simulation platform is proposed. Intersection of Guanghua Road/Jintong East Road in Beijing and five consecutive intersections on Youyi Street in Baotou are Selected as study cases. Sensitivity analysis is conducted on initial parameter combinations. Based on the analysis results, parameters to be calibrated are selected. Models of cases are developed in VISSIM and driving behavior parameters are calibrated. Simulation results show that …

Weld Bead Size Prediction Of Wire And Arc Additive Manufacturing Based On Acs-Dbn, Dong Hai, Xiuxiu Gao, Mingqi Wei

Journal of System Simulation

Abstract: Welding pass overlap is the essence of wire and arc additive manufacturing (WAAM) technology. Appropriate process parameter selection is of great significance to control the welding pass geometry and improve the dimensional accuracy of the molded parts. A prediction model of deep beilef network (DBN) optimized by adaptive cuckoo search (ACS) algorithm is constructed. The welding width and residual height of the weld pass are predicted based on the four technological parameters of the given nozzle height, welding current, welding speed and wire feeding speed. The optimal number of hidden layers and hidden elements are determined based on the …

Study On Prediction Of Crystal Properties Based On Deep Learning, Buwei Wang, Wang Min, Fan Qian, Ya'nan Wang, Hanwen Zhang, Yunliang Yue

Journal of System Simulation

Abstract: Predicting crystal properties using traditional machine learning methods requires complex feature engineering. In order to bypass time-consuming feature engineering, element network (ElemNet), representation learning from stoichiometry (Roost), compositionally-restricted attention-based network (CrabNet) and crystal graph convolution neural network (CGCNN) based on deep learning technology are used to simulate the formation energy, total energy per atom, band gap, and Fermi energy of crystal. The residual learning is introduced into CGCNN, and a crystal graph convolution residual neural network (CGCRN) is proposed. In the CGCRN, the number of hidden layers and the number of nodes in the hidden layers are increased, …

Improved Ant Colony Optimization Algorithm For Jamming Resource Allocation, Qingyun Wang, Dezhong Jiao, Shi Shuo, Genyan Peng, Junhua Sun, Yuxin Duan

Journal of System Simulation

Abstract: Ant Colony Optimization (ACO) is a new intelligence optimization algorithm. When applied to jamming resource allocation, the velocity of convergence in optimization process is slow and the probability of obtaining the global optimal solution is low. In order to raise the efficiency of jamming resource allocation and the probability of getting global optimal solution, the attenuation factor is improved to a variable that changes according to the exponential function in optimization process. The attenuation factor is taken as a relatively small value in the initial search phase, and increases monotonically and exponentially as the number of iterations increases. Simulation …

Research On Semi-Physical Simulation Model Of Special Vehicle Cockpit With Force Feedback, Liang Feng, Zhili Zhang, Xiangyang Li, Yihao Li, Wang Bei, Long Yong

Journal of System Simulation

Abstract: To improve the interaction and immersion of cockpit simulation training system, a semi-physical model of special vehicle cockpit with force feedback is studied. The important force feedback parts of the semi-physical simulation model are designed to provide more real operation experience for operators. The simulation training method of special vehicle cockpit based on dynamic model is studied to match the action input of operators with scene changes and provide a high fidelity visual experience. The driving simulation operation process of special vehicle is analyzed and verified. Simulation experiments show that the model has the characteristics of high precision, fast …

Special Vehicle Driving Training Simulation System Based On Integration Of Virtuality And Reality, Xiangyang Li, Wang Xiao, Zhili Zhang, Yihao Li, Long Yong

Journal of System Simulation

Abstract: Aiming at the actual demands of special vehicle driving training, special vehicle driving training simulation system is designed and developed based on the integration of virtuality and reality mode. Through building all kinds of mathematical models, functional modules, workflows and control software, and applying the cab that same as actual equipment with manipulating device, central control instrument and driving seat, immersive driving training environment with integration of virtuality and reality is established based on 6-DoF motion platform and its control system as well as multi-channel visual display device. It can provide the integrated support platform with “educating, training and …

Low Power Visual Odometry Technology Based On Monocular Depth Estimation, Ma Rong, Qiurui Chen, Zhang Han, Mei Zheng, Wang Rui, Wei Wei

Journal of System Simulation

Abstract: With the development of artificial intelligence, precision machinery and computing technology, micro-unmanned system will play an important role in the future battlefield. To solve the lack of monocular visual odometry scale, micro robot power consumption and load limits, the monocular depth estimation technology is introduced and a low view dataset is collected. A convolutional neural network to predict depth information from a single image is built, and the structure of neural network model is optimized. The depth estimation with monocular visual odometry are combined and deployed on JetsonNano. Experiments show that the combined monocular visual odometry can recover scale …

Brief Review On Applying Reinforcement Learning To Job Shop Scheduling Problems, Xiaohan Wang, Zhang Lin, Ren Lei, Kunyu Xie, Kunyu Wang, Ye Fei, Chen Zhen

Journal of System Simulation

Abstract: Reinforcement Learning (RL) achieves lower time response and better model generalization in Job Shop Scheduling Problem (JSSP). To explain the current overall research status of JSSP based on RL, summarize the current scheduling framework based on RL, and lay the foundation for follow-up research, the backgrounds of JSSP and RL are introduced. Two simulation techniques commonly used in JSSP are analyzed and two commonly used frameworks for RL to solve JSSP are given. In addition, some existing challenges are pointed out, and related research progress is introduced from three aspects: direct scheduling, feature representation-based scheduling, and parameter search-based scheduling.

Survey Of Ship Detection In Video Surveillance Based On Shallow Machine Learning, Zhenbo Bi, Shiyou Zhang, Yang Hua, Yuanhong Wu

Journal of System Simulation

Abstract: At present, detection of ship targets in video surveillance based on shallow machine learning methods is still attracting attention in the fields of underwater cultural heritage protection, marine aquaculture, maritime traffic, and port management. This paper provides a review and discussion for this kind of ship detection methods. The ship target detection based on video surveillance is divided into five parts according to the key technologies involved: preprocessing, region of interest extraction, target segmentation, ship feature extraction and ship type recognition. According to different functional modules, the core problems involved in them are pointed out, and the core ideas, …

Real-Time Simulation Technology Of Fluid-Thermo-Solid Coupling Of Hypersonic Vehicle, Yunqin Liu, Li Ni, Luming Zhao, Jinpeng Bai, Tingjun Li, Chenguang Wang

Journal of System Simulation

Abstract: The solution of the coupling characteristics of fluid-thermo-solid physics in the modeling of hypersonic vehicle is an unavoidable difficulty, and the real-time simulation of fluid-thermo-solid coupling is particularly challenging. Aiming at the conflicting problem of solution accuracy and solution efficiency in fluid-thermo-solid coupling real-time simulation, a CFD (Computational Fluid Dynamics)/ CSD (Computational Structural Dynamics)-based fluid-thermo-solid coupling characteristic solution method is established, which realizes the high-precision solution of the fluid, temperature, and structural deformation field coupling. According to the multi-condition offline solution set modeling method, by accumulating a large number of offline solutions as effective support for online …

A Data-Driven Modeling Method For Game Adversity Agent, Zeng Bi, Fang Xiao, Deshuai Kong, Xiangxiang Song, Zhengxuan Jia, Tingyu Lin

Journal of System Simulation

Abstract: Aiming at the problems of collaborative modeling of formation behavior and intelligent generation of decision-making in complex confrontation scenarios, based on the serious game to simulate the confrontation scenarios of complex maritime equipment against the air, this paper proposes a data-driven modeling method for game agent and uses a distributed modeling technology of parallel adversarial scenarios and opportunistic decision making technology of smart targets to achieve agent modeling. It provides support for the further exploration of multi-objective collaborative modeling in complex confrontation scenarios. The simulation results show that deep reinforcement learning algorithms can provide a basis for the modeling …

Research On Usv Navigation Simulation Key Technologies, Jianhai Jin, Zexing Zhou, Zhang Bo, Yihong Chen, Xizhong Wei

Journal of System Simulation

Abstract: In order to solve the problems of long test time, high cost and high risk, a general framework of simulation system for autonomous navigation test and verification of USV(Unmanned Surface Vessel) has been developed, and some key simulation technologies such as complex scenario simulation, intelligent perception, navigation simulation and environmental effect modeling are researched. the dynamic equation, kinematics equation, wind load modeling, wave surface modeling, wave drift force modeling and ocean current modeling are designed and realized. The simulation system is proved to have high accuracy and fidelity by the real ship test on the lake, which can greatly …

Kinematics Analysis And Simulation Of Automatically Tracking Dental Surgery Lamp, Zerui Jiang, Lijun Yang, Li Jun, Xiaolong Jiao, Zheng Hang

Journal of System Simulation

Abstract: In order to solve the problem that the oral surgical lamp cannot automatically adjust the irradiation posture of the surgical lamp according to the face direction and oral cavity position, a six-degree-of-freedom automatic tracking visual manipulator solution is proposed. Coordinate conversion is achieved through binocular vision to obtain three-dimensional information of oral cavity position and face normal vector. The geometric method is introduced into the kinematics calculation, and the closed solution of the inverse kinematics is obtained. The correctness is verified by the Maltab programming and the introduction of numerical values. Five-degree polynomial motion planning is performed …

Research On Digital Twin-Based Modeling And Monitoring Of Five-Axis Grinder, Xiao Tong, Haifan Jiang, Guofu Ding, Jiang Lei, Shuwen Ma

Journal of System Simulation

Abstract: Aiming at the poor virtual-real interaction ability, single data presentation mode, and hysteretic abnormality handling in CNC machine tool status monitoring, a visual monitoring method for machine tool process based on digital twin is proposed, Which realizes the mapping of three subsystems of machine tool, machinery, control and electrical to the information space from three dimensions of geometry, logic and data. The verification of instructions and CNC programs, real-time status monitoring and abnormality handling during operation are carried out. A digital twin-based machine tool modeling and monitoring system is designed and developed. Taking a five-axis CNC …

Hyperspectral Rx Anomaly Detection Method Based On The Fusion Of Spatial And Spectral Feature, Liu Xuan, Xiangyang Li, He Fang, Jianwei Zhao, Fenggan Zhang

Journal of System Simulation

Abstract: To address the problem that the hyperspectral anomaly detection algorithm does not make full use of the spatial information of the hyperspectral image and the detection accuracy is limited, a FSSRX (Fusing Spatial and Spectral Reed-Xiaol) anomaly detection algorithm that fuses spatial and spectrum information is proposed to improve the accuracy of hyperspectral anomaly detection. In FSSRX algorithm, the spatial feature of hyperspectral images is firstly extracted by the EMAP(Extended Multi-attribute Profile) method and the abnormal score of each pixel in spatial features is then calculated with RX detector. Meanwhile, RX anomaly detection is carried out directly on the …

Research On Model Reuse Technology Based On Semantic Matching And Composition, Xingyu Tian, Guangxun Zeng, Yunbo Gao, Lili Ye, Guanghong Gong, Li Ni

Journal of System Simulation

Abstract: In order to solve the data barriers between the conceptual model and the simulation scenario of the combat system, the intelligent mapping and model reuse technology of the simulation scenario is researched. The conceptual model is analyzed using DOM technology. Based on the ontology theory, the knowledge base of the combat domain is constructed and the web crawler is customized to build the domain thesaurus. Through the SWRL rule library, the reasoning engine is called to realize the relational reasoning at the semantic level. An intelligent matching algorithm is designed to map the semantic relationship to the combination relationship …

Research On Cloud Tool Integration And Management Methods, Tianying Zhang, Ji Hang, Junhua Zhou, Tao Luan

Journal of System Simulation

Abstract: In response to the application needs of using professional tools to develop complex products in the fields of aerospace, aviation, weapons, ships, etc., it is urgent to implement centralized management of cloud tools and cross-professional sharing of tools through tool service-oriented methods, so as to solve issues such as inconsistent tool versions, cross-professional resource barriers, and high thresholds for tool mastery during the traditional model development process. By studying the integration and calling methods of cross-professional and different versions of self-developed tools, as well as methods of tool server operation control, authority management, etc., and taking the local …

Predictive Control Method Of Peak Hour Passenger Flow At Urban Rail Station, Xiaohe Li, Jianping Wu, Depin Peng

Journal of System Simulation

Abstract: With the rapid development of subway in China, the urban rail station, especially the transfer station, is prone to generate passenger congestion in the peak period. After analyzing the types of passenger flow in and out of the platform, a predictive control model of passenger flow is established based on the discrete linear quadratic optimal control theory. Taking Fuxingmen Station as an example, the simulation environment of the station is built by using the simulation software of Anylogic. The historical passenger flow data in peak period and the optimal passenger flow control sequence obtained by solving the passenger flow …

Study And Effect Evaluation On The Setting Of Contraflow Left-Turn At Intersections, Zhao Dan, Xuejun Niu, Shuhao Zhang, Jiaxu Wei

Journal of System Simulation

Abstract: Contraflow left-turn is one of the traffic organization ways at intersections. By analyzing the setting parameters of the contraflow left-turn, the length and the range of the contraflow left-turn lane, the constrained conditions of the contraflow left-turn are determined, and the applicable conditions are determined from the road, traffic and signal control. VISSIM software is used to analyze a road intersection, simulate and evaluate the indicators related to the intersection entrance, optimize the timing plan of contraflow left-turn lane, and validate the feasibility and advantages of contraflow left-turn lane. The results show that the intersection delays are reduced by …

Variety Recognition Based On Deep Learning And Double-Sided Characteristics Of Maize Kernel, Feng Xiao, Zhang Hui, Zhou Rui, Qiao Lu, Wei Dong, Dandan Li, Yuyao Zhang, Guoqing Zheng

Journal of System Simulation

Abstract: In order to construct a maize kernel variety recognition model with high recognition accuracy and suitable for mobile phone application, a mobile phone is used to obtain maize kernel double-sided (embryonic and non-embryonic) images. Based on the lightweight convolutional neural network MobileNetV2 and transfer learning, a maize kernel image variety recognition model is constructed. In view of the existing research methods are mainly for single-sided recognition of maize kernel variety, the performance of single-sided and double-sided characteristics modeling and recognition is compared. The results show that the double-sided recognition accuracy of maize kernel double-sided characteristics modeling is 99.83%, which …

Smart Decision-Making Via Edge Intelligence For Smart Cities, Nathaniel Hudson

Theses and Dissertations--Computer Science

Smart cities are an ambitious vision for future urban environments. The ultimate aim of smart cities is to use modern technology to optimize city resources and operations while improving overall quality-of-life of its citizens. Realizing this ambitious vision will require embracing advancements in information communication technology, data analysis, and other technologies. Because smart cities naturally produce vast amounts of data, recent artificial intelligence (AI) techniques are of interest due to their ability to transform raw data into insightful knowledge to inform decisions (e.g., using live road traffic data to control traffic lights based on current traffic conditions). However, training and …

A Practical Approach To Automated Software Correctness Enhancement, Aleksandr Zakharchenko

Dissertations

To repair an incorrect program does not mean to make it correct; it only means to make it more-correct, in some sense, than it is. In the absence of a concept of relative correctness, i.e. the property of a program to be more-correct than another with respect to a specification, the discipline of program repair has resorted to various approximations of absolute (traditional) correctness, with varying degrees of success. This shortcoming is concealed by the fact that most program repair tools are tested on basic cases, whence making them absolutely correct is not clearly distinguishable from making them relatively more-correct. …

Deep Convolutional Neural Networks For Accurate Diagnosis Of Covid-19 Patients Using Chest X-Ray Image Databases From Italy, Canada, And The Usa, Amgad A. Salama, Samy H. Darwish, Samir M. Abdel-Mageed, Radwa A. Meshref, Ehab I. Mohamed

The University of Louisville Journal of Respiratory Infections

Introduction: Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), famously known as COVID-19, has quickly become a global pandemic. Chest X-ray (CXR) imaging has proven reliable, fast, and cost-effective for identifying COVID-19 infections, which proceeds to display atypical unilateral patchy infiltration in the lungs like typical pneumonia. We employed the deep convolutional neural network (DCNN) ResNet-34 to detect and classify CXR images from patients with COVID-19 and Viral Pneumonia and Normal Controls.

Methods: We created a single database containing 781 source CXR images from four different international sub-databases: the Società Italiana di Radiologia Medica e Interventistica (SIRM), the GitHub Database, the …

Hierarchical Control Of Multi-Agent Reinforcement Learning Team In Real-Time Strategy (Rts) Games, Weigui Jair Zhou, Budhitama Subagdja, Ah-Hwee Tan, Darren Wee Sze Ong

Research Collection School Of Computing and Information Systems

Coordinated control of multi-agent teams is an important task in many real-time strategy (RTS) games. In most prior work, micromanagement is the commonly used strategy whereby individual agents operate independently and make their own combat decisions. On the other extreme, some employ a macromanagement strategy whereby all agents are controlled by a single decision model. In this paper, we propose a hierarchical command and control architecture, consisting of a single high-level and multiple low-level reinforcement learning agents operating in a dynamic environment. This hierarchical model enables the low-level unit agents to make individual decisions while taking commands from the high-level …

Fuzzy Information Granulation And Improved Rvm For Rolling Bearing Life Prediction, Xiaoman Hu, Wang Yan, Zhicheng Ji

Journal of System Simulation

Abstract: Aiming at the low accuracy in life prediction and unpredictable problems of degenerative performance trends and fluctuation ranges, etc. Of the bearing life prediction, an improved complete ensemble empirical mode decomposition with adaptive noise analysis and fuzzy information granulating method of improved relevance vector machine is proposed. Focusing on bearing data containing a lot of noise, through the improved complete ensemble empirical mode decomposition with adaptive noise analysis in combination with wavelet packet denoising, the principal component analysis is carride out by exitracing a variety of characeteristics of the signal, the effective information is extracted by granulating the fuzzy …

Simulation Of Pedestrian In Multifunctional Passageway Of Metro Station Area Based On Social Force Model, Wang Xi, Zhang Rui, Fei Shuo, Minghang Yang

Journal of System Simulation

Abstract: Transitional passageway connecting subway stations and commercial facilities is generally designed as the multifunctional passageway, in which the traffic function is the main and the service function is the auxiliary. The impact of the service facilities on both sides of the passage on pedestrian traffic is difficult to be quantitatively analyzed and simulated and modeled. Through measurement, it is found that the viscous effect of service facilities on pedestrian traffic is mainly slowing down the speed or changing the trajectory direction. Through analyzing the horizontal influence range of service facilities, dividing the passage into different areas, and introducing the …