Polymer Chemistry Commons^™

Synthesis Of Antibody Functionalized Polyaniline/Polystyrene/N-Gqds Composite Fibermats For Sweat Based Cortisol Biosensing Applications, Ashwin James

Honors Theses

Noninvasive, wearable biosensors capable of detecting stress biomarkers in sweat require electrodes that are flexible, conductive, insoluble in water, and highly sensitive at low concentrations of analyte. In this work, bovine serum albumin blocked and anti-cmab immobilized nitrogen doped graphene quantum dots integrated polyaniline/polystyrene composite fibermat electrodes (BSA/Anti-Cmab/N-GQDs/PANI/PS electrodes) were synthesized and evaluated as a potential platform for an electrochemical cortisol biosensor in sweat based systems. Polyaniline was utilized in order to provide electrical conductivity, while polystyrene served as a carrying polymer for mechanical support and its hydrophobicity. Composite fibermats were manufactured through Forcespinning™, followed by a secondary polyaniline graft …

Nitro Group Reduction For Use In Organic, Cathodic Materials, Brock G. Goeden

Honors Thesis

The industrial demand for higher capacity, light-weight battery materials has skyrocketed in recent years due to heavy investments in portable electronics, electronic vehicles, and renewable energy sources. However, rechargeable battery technology has seen little improvement since the invention of the Lithium-Ion battery in the 1980s. The low energy density of the traditionally utilized LiCoO2 cathodic material (specific capacity: 272 mAh g-1), has limited its potential to meet these increasing demands. To solve this problem, our research group is investigating new types of lightweight, organic, polymeric materials with conductive backbones as a possible replacement for the cathodic materials in Lithium-Ion batteries. …

An Investigation Of Cross-Links On Crystallization And Degradation In A Novel, Photocross-Linkable Poly (Lactic Acid) System, Nicholas Baksh

USF Tampa Graduate Theses and Dissertations

Polymeric molecular structure consists of repeating units bonded together. Mechanicalproperties can be altered without affecting chemical makeup by altering the number of these units. Small molecules can be introduced and/or polymers can be modified to form bonds between molecular chains. Cross-linking, as this is called, also introduces mechanical variation with minimal effects on chemical composition. Lastly, polymer chains reorient themselves in response to intermolecular forces. This temperature dependent response is known as crystallization. Although chemistry is unaltered, mechanical properties can depend highly on the percent of the sample that is crystallized.

Cross-linking is known to enhance the mechanical properties of …

Synthesis Of Bio-Based Polymer Products, Joshua Sukie

Williams Honors College, Honors Research Projects

The project covers the synthesis of two bio-based polymers. One aspect of the research investigates the synthesis of materials for use in vegetable oil-based UV-curable coating, and the subsequent polymerization of the materials into a coating film. The second aspect of the research follows the synthesis of a functionalized cellulose material for use as a reinforcer in a vegetable oil-based composite. Both products are subsequently analyzed by various methods.

Synthesis Of A Bipyridine Ligand For Metal-Triggered Supramolecular Polymers, Andrew D. Gould

DePaul Discoveries

Intermolecular forces, such as H-bonding, ionic interactions and metal chelation between small molecules, can lead to the assembly of higher-order supramolecular nanostructures. A metal chelator, 2-(Pyridin-2-yl) pyridine-5-carboxylic Acid (a bipyridine derivative), is expected to aid in the formation of supramolecular structures as part of amphiphilic molecules that self-assemble in solution in the presence of metal ions. The bipyridine ligand currently under synthesis can be prepared through a five-step synthesis scheme. The second reaction of this synthesis (the coupling of two pyridine rings) resulted in a combination of the desired 1,2,5-isomer, as well as an unforeseen 1,2,3-isomer. Future research will therefore …

Block-Copolymer Assisted Fabrication Of Anisotropic Plasmonic Nanostructures, Calbi J. Gunder

Graduate Theses/Dissertations

The anisotropic nanostructures of noble metals are of great interest for plasmonic applications due to the possibility of tuning the localized surface plasmon resonance (LSPR) across the UV-VIS-NIR without sacrificing the linewidth as well as to achieve larger local field enhancement. Here, we report a simple and promising fabrication method of anisotropic gold nanostructures film using polystyrene-b-2vinylpyridine (PS-b-P2VP) block copolymers (BCP) as a template. In this approach, PS-b-P2VP spherical micelles were first synthesized as a template followed by selective deposition of Au precursor inside P2VP core of the micelles using ethanol solution of Au salt. Subsequently, heat treatment of the …

Silver Nanoparticles As A Potential Solar Absorber, Benjamin Hardy

Honors Projects

This work reports the development of Silver nanoparticles implanted into a polymer as a solar absorber. The plasmonic nature of silver nanoparticle allows for adjustments to be made in its UV-VIS-NIR absorbance spectrum. A combination of different sized/shaped particles could result in ideal absorption of the majority of the solar spectrum. Allotting this with the stability of a polymer leads to potential solids or solutions that could work as a solar absorber. Tests were also performed to determine whether or not UV-C irradiation during synthesis effects the characteristics of silver nanoparticles, in particular the absorbance. Successful synthesis of silver nanoparticle …

Calculating The Energy Barriers Required To Join Metal-Organic Framework Synthesis Intermediates With Non-Equilibrium Molecular Simulation, Marcus A. Tubbs, David Cantu, Roger Rousseau, Vassiliki-Alexandra Glezakou

STAR Program Research Presentations

Metal organic frameworks are synthetic porous materials with great capacity for adsorption of carbon dioxide and methane. They chemically appear as a chain-link fence with nodes of metal connected by organic linkers. The pores between the nodes define the characteristics of the material, allowing gas particles of specific size to pass through while blocking larger particulates. While there has been success in synthesizing small amounts of metal organic frameworks, the mechanistic details behind their assembly remain unknown. Understanding the synthesis mechanism is necessary to understand the kinetics involved and be able to produce this useful material on an industrial scale. …

A New Synthesis Of Bis (4-Tert-Butylphenyl) Iodonium Hexafluoroantimonate; A Known Catalyst For Photopolymerization, Matthew C. Salvi

Chemistry Master’s Theses

This thesis describes a novel reaction protocol for the synthesis of bis (4-tert-butylphenyl) iodonium (BtPhI) hexafluoroantimonate (2) via the formation of diacetoxy (t-butylphenyl)-λ3-iodane (1). It is also important to provide a safe and robust reaction procedure for future scaled-up production.

Biodegradable Poly(Ester Urea's) Scaffold Sponges Containing Platelet-Rich Plasma For Targeted Tendon-Bone Fixation, Alex B. Ellenberger Mr.

Williams Honors College, Honors Research Projects

In this report the synthesis and characterization of L-valine and L-isoleucine poly(ester ureas) (PEUs) for future use in the synthesis of biodegradable PEUs sponges will be discussed. The method of monomer and polymer synthesis will be explained along with the characterization of the monomer and polymer products. This characterization will be done by the use of Nuclear Magnetic Resonance (NMR) and Size Exclusion Chromatography (SEC). NMR is a quick and convenient method for determining structure and purity of the monomer and polymer products. SEC gives the number average molecular weight, which is the statistical average molecular weight of all the …

Latent Cysteine Residues From Polymers Prepared Via Free And Controlled Radical Polymerizations, Douglas Vincent Amato

Master's Theses

One less commonly used “click” reaction is thiazolidine chemistry. Thiazolidine chemistry is a commonly used reaction used in biological systems because the reaction requires the presence of both cysteine (a common amino acid) and an aldehyde or ketone. If cysteine residues could be incorporated into a polymer then a variety of applications could be developed. Polymers containing free thiols (aka thiomers) have developed in the last decade to become great mucoadhesives. If there was a facile route to control the amount of free thiols along the polymer then more fine-tuned and potentially stronger adhesives could be made. For these reasons …

Synthesis, Characterization, And Deuterium Labeling Of Polyamides Studied By Nuclear Magnetic Resonance Spectroscopy, Christopher Allen Lange

Dissertations

The synthesis, characterization, and deuterium labeling of polyamides have been investigated. In Chapter II, selective deuterium labeling of various polyamides was demonstrated via a facile method which does not require organic solvent or catalyst. Quantitative solution-state NMR analysis showed deuterium incorporation at the carbon alpha to the carbonyl ranged from 20-75%. Incorporation in ε-caprolactam increased with repeated treatments. Isotopic shift effects for the deuterated materials were additive for all sites within experimental error.

In Chapter III, the effect of stoichiometric imbalances on the polymerization of poly(dodecamethylene terephthalamide)was investigated. Molecular weight was varied by polymerizing the monomer salt with excess diaminododecane, …

Size-Controlled Synthesis Of Monodisperse Core/Shell Nanogels, William H. Blackburn, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

Small, monodisperse nanogels (similar to 50-nm radius) were synthesized by free-radical precipitation polymerization and were characterized using a suite of light scattering and chromatography methods. Nanogels were synthesized with either N-isopropylacrylamide or N-isopropylmethacrylamide as the main monomer, with acrylic acid or 4-acrylamidofluorescein as a comonomer and N,N'-methylenebis(acrylamide) as a cross-linker. By varying the surfactant and initiator concentrations, particle size was controlled while maintaining excellent monodispersity. An amine-containing shell was added to these core particles to facilitate subsequent bioconjugation. Successful conjugation of folic acid to the particles was demonstrated as an example of how such materials might be employed in a …

Synthesis And Characterization Of Highly Conductive Polypyrrole And Polypyrrole/Lignosulfonate/Graphite Composites, Aopeau Imvittaya

Theses and Dissertations

Polypyrrole (PPy) is one of the conductive polymers frequently used in commercial applications, mainly due to its long-term stability and the possibility of forming homopolymers or composites with optimal properties. Polypyrroles were prepared by the chemical polymerization of pyrrole using various methods. The effects of several parameters such as oxidant, dopant type, additives and reaction conditions on the properties of PPy were investigated. In addition, PPy/graphite composites were prepared because graphite is highly conductive and effectively incorporated into the polymer matrix during the polymerization. The amount of graphite in the composite was varied to determine the maximimum conductivity achievable in …