Polymer Chemistry Commons^™

Mechanistic Investigation Of Ring-Opening Polymerization Of Polycaprolactone Using Tin(Ii) Catalysts: Ligand Effects And Biomedical Applications, Eva-Larue M. Barber

Honors Scholar Theses

This research explores the mechanistic aspects of ring-opening polymerization (ROP) of ε-caprolactone (CL) to produce polycaprolactone (PCL), a biodegradable polymer widely used in biomedical applications. The study investigates how light exposure and catalyst concentration influence polymerization efficiency, using tin(II) 2-ethylhexanoate [Sn(Oct)₂] as the catalyst in a non-polar toluene solvent at 90 °C. Reactions were conducted under either ambient light or black light bulb (BLB) illumination, with monomer-to-catalyst ratios of 1:1 and 200:1.

Proton nuclear magnetic resonance (¹H NMR) spectroscopy was used to analyze conversion efficiency by tracking the disappearance of monomer signals and appearance of characteristic PCL peaks. Results revealed …

Development And Characterization Of Polysaccharide-Based Controlled Drug Delivery Platforms, Amanda Pepler

Open Access Dissertations

Drug delivery research focuses on overcoming challenges in patient treatment. Most therapeutics are delivered systemically through oral or intravenous routes. However, these administration methods are often inefficient due to therapeutic hydrophobicity, poor bioavailability, and liver metabolic clearance, necessitating frequent dosing. When treatment plans require frequent dosing, patients experience significant fluctuations in therapeutic concentration in the bloodstream, which can increase adverse side effects. These factors contribute to low patient compliance. Therefore, the core focus of drug delivery research is to develop new administration routes for therapeutics. Drug delivery systems (DDS) that can target therapeutics to a localized region offer advantages over …

Engineered Plga Nanofibers For Drug Delivery, Andrew Mancuso

Dissertations, Theses, and Capstone Projects

Poly-lactic-co-glycolic acid (PLGA) polymers are rapidly gaining momentum as a platform for next-generation drug delivery systems due to their ease and low cost of synthesis, favorable biocompatibility and biodegradability, and lack of toxicity. In particular, the application of drug-loaded PLGA nanofibers directly to a target tissue may represent a promising alternative to traditional routes of drug administration (e.g., oral, injectable) as they offer the potential to greatly improve bioavailability, increase efficacy, and reduce off-target toxicity. Furthermore, the use of such a system may potentially allow for greater flexibility in clinical drug development, by enabling the use of compounds which have …

Amphiphilic Block Copolymers And The Applications In Therapeutics Delivery, Jie Dou

Dissertations

Well-defined thermo-responsive triblock copolymers containing polyethylene oxide (PEO) and poly(N-isopropyl acrylamide) PNIPAM are synthesized by a type of living controlled polymerization, named iniferter polymerization. The polymers are amphiphilic in nature and are self-assembled into a micelle. Their properties and application are characterized and investigated in this work.

Foremost, the initiator of the polymerization (iniferter) is designed and synthesized by condensation polymerization, where PEO is incorporated into the structure to improve biocompatibility, which has great potential for biological application. Moreover, this iniferter reagent could be applied to more than 70 percent of vinyl monomers.

NIPAM, a commercial vinyl monomer, is chosen …

End Group Modification Of Linear Dendritic Block Copolymers (Ldbcs), Chinwe Udemgba

Honors Theses

Linear dendritic block copolymers are amphiphilic molecules that consist of a dendritic hydrophilic portion and a linear hydrophobic portion. Its unique ability to self-assemble into spherical nanoaggregates while having the potential to uptake and transport both hydrophilic and hydrophobic drugs makes these polymers an item of interest in regard to the drug delivery field. The synthesis of polyamidoamine-polylactide linear dendritic block copolymers was designed to address the common issues in drug delivery systems, including problems in permeability, solubility, stability, specificity, and retention. Though this linear dendritic block copolymer has previously been synthesized in our lab with cationic amine surface functionalities, …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Recently Developed Carbohydrate Based Gelators And Their Applications, Joedian Morris, Jonathan Bietsch, Kristen Bashaw, Guijun Wang

Chemistry & Biochemistry Faculty Publications

Carbohydrate based low molecular weight gelators have been an intense subject of study over the past decade. The self-assembling systems built from natural products have high significance as biocompatible materials and renewable resources. The versatile structures available from naturally existing monosaccharides have enriched the molecular libraries that can be used for the construction of gelators. The bottom-up strategy in designing low molecular weight gelators (LMWGs) for a variety of applications has been adopted by many researchers. Rational design, along with some serendipitous discoveries, has resulted in multiple classes of molecular gelators. This review covers the literature from 2017-2020 on monosaccharide …

Antibacterial Coatings Derived From Novel Chemically Responsive Vesicles, Emily B. Mobley

Master's Theses

In order for a drug, or any material used for the purpose of eliciting a change in an organisms’ physical or chemical state, to be effective it must reach the intended target intact and for a sustained rate over time. Drug delivery systems encapsulate a drug to protect it from degradation, prevent side reactions, increase solubility, improve accumulation rates at target sites, and release drugs at a controlled rate. Controlled and sustained release of drugs is achieved by degradation of the carrier triggered by breaking dynamic chemical bonds caused by changes in the chemical environment such as pH or redox …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Photopolymerization Synthesis Of Magnetic Nanoparticle Embedded Nanogels For Targeted Biotherapeutic Delivery, Daniel Jonwal Denmark

USF Tampa Graduate Theses and Dissertations

Conventional therapeutic techniques treat the patient by delivering a biotherapeutic to the entire body rather than the target tissue. In the case of chemotherapy, the biotherapeutic is a drug that kills healthy and diseased cells indiscriminately which can lead to undesirable side effects. With targeted delivery, biotherapeutics can be delivered directly to the diseased tissue significantly reducing exposure to otherwise healthy tissue. Typical composite delivery devices are minimally composed of a stimuli responsive polymer, such as poly(N-isopropylacrylamide), allowing for triggered release when heated beyond approximately 32 °C, and magnetic nanoparticles which enable targeting as well as provide a mechanism for …

Poly(Ethyl Glyoxylate)-Poly(Ethylene Oxide) Nanoparticles: Stimuli- Responsive Drug Release Via End-To-End Polyglyoxylate Depolymerization, Bo Fan, Elizabeth Gillies

Chemistry Publications

The ability to disrupt polymer assemblies in response to specifi c stimuli provides the potential to release drugs selectively at certain sites or conditions in vivo. However, most stimuli-responsive delivery systems require many stimuli initiated events to release drugs. “ Self-immolative polymers” offer the potential to provide amplifi ed responses to stimuli as they undergo complete end-to-end depolymerization following the cleavage of a single end-cap. Herein, linker end-caps were developed to conjugate self-immolative poly(ethyl glyoxylate) (PEtG) with poly(ethylene oxide) (PEO) to form amphiphilic block copolymers. These copolymers were self-assembled to form nanoparticles in aqueous solution. Cleavage of the linker …

Addressing The Issues Of Drug Delivery Via Advanced Macromolecular Design, Brooks Allen Abel

Dissertations

The work described in this dissertation focuses on the development of synthetic approaches toward novel polymer architectures that specifically address the issues of in vivo drug delivery. Successful implementation of the synthetic methodologies described herein required fundamental investigations into the underlying chemistries in ways that now provide greater insights into the nature of the these chemical reactions.

In Section I, the synthesis of tunable pH- and CO₂-responsive sulfonamide-containing polymers using reversible addition-fragmentation chain transfer (RAFT) polymerization is described. Initially, poor polymerization control of methacryloyl sulfonamide (MSA) monomers was observed using traditional RAFT polymerization conditions. Ultimately, reducing the polymerization …

Biological Materials: Part A. Temperature-Responsive Polymers And Drug Delivery And Part B. Polymer Modification Of Fish Scale And Their Nano-Mechanical Properties, Xu Xiang

Dissertations, Master's Theses and Master's Reports - Open

This research has three parts. Two parts deal with novel nanoparticle assemblies for drug delivery, and are described in Part A, while the third part looks at properties of fish scales, an abundant and little-used waste resource, that can be modified to have value in medical and other areas.

Part A describes fundamental research into the affects of block sequence of amphiphilic block copolymers prepared from on a new and versatile class of monomers, oligo(ethylene glycol) methyl ether acrylate (OEGA) and the more hydrophobic di(ethylene glycol) methyl ether methacrylate (DEGMA). Polymers from these monomers are biologically safe and give polymers …

Tuning Responsiveness Of Polypeptide Based Block Copolymers For Drug Delivery, Ashley J. Johnson

Dissertations

The goal of this dissertation was to tune the pH response and self-assembled morphologies of amphiphilic polypeptide block copolymers for use as drug delivery vehicles. Poly(L-lysine) and poly(L-glutamtic acid) are responsive, ionizable polypeptides that undergo secondary structure transitions, from α-helix to random coil, whereby the change in conformation of the peptide chain results in changes to the global morphology of a self-assembled system. The main focus of this work was to understand how changes in the polymer composition and the local environment can lead to control over the behavior of the overall system. First, the responsive behavior of poly(L-lysine) block …