Polymer Chemistry Commons^™

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Assessment Of Polymeric Chloroquine Formulations For Targeted Therapy Of Ulcerative Colitis And Metastatic Colorectal Cancer, Neha Kumari

Theses & Dissertations

Effective targeted drug delivery is a critical unmet need in the management of both ulcerative colitis and metastatic colorectal cancer, where conventional systemic therapies may be hindered by suboptimal efficacy and significant side effects. This thesis explores the development and preclinical assessment of polymeric chloroquine (PCQ)-based nanotherapeutics, leveraging stimuli-responsive designs for disease-specific delivery and action.

For ulcerative colitis, a reactive oxygen species (ROS)-responsive nanogel system was engineered to release PCQ, a macromolecular derivative of hydroxychloroquine, specifically in the inflamed areas within the colon. Nanogels with well-defined size and positive surface charge were synthesized via reversible fragmentation chain transfer (RAFT) polymerization …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

An Overview Of Biomass-Derived Graphene Oxide And Its Characteristics For Future Sustainable Applications, Afif Wardana, Ahmad Nabil Shahab, Donanta Dhaneswara, Nofrijon Sofyan

Journal of Materials Exploration and Findings

The production of graphene oxide (GO) from biomass presents considerable promise as a sustainable alternative substitute for traditional semiconductors. Biomass waste, abundant and often underutilized worldwide, is distinguished by its high carbon content and regenerative characteristics, rendering it an optimal resource for sustainable material production. By heating its biopolymers, lignocellulosic biomass can be used as a new material to make graphene, which forms three-dimensional turbostratic crystallites. These crystallites, composed of partially defective aromatic carbon sheets with graphite-like characteristics, make it easier to create GO with specialized functions for cutting-edge applications. Its capability underscores the revolutionary potential of biomass waste in …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Optimization In The Synthesis Of Dual Ionic-Liquid-Functionalized Cellulosic Materials, Megan L. Franke

Honors College Theses

There is a growing urgency to develop sustainable alternatives to petroleum-based materials as concerns about environmental impact and resource depletion intensify. Among renewable biopolymers, cellulose stands out as one of the most abundant and versatile organic compounds on Earth. As the structural backbone of plant cell walls, it provides rigidity and mechanical strength, while its abundance, biodegradability, and tunable chemistry make it an attractive candidate for sustainable materials. Beyond its traditional uses in textiles, paper, and food additives, cellulose has been increasingly investigated in polymer chemistry for advanced

applications. The present study aims to optimize synthetic routes to dual ionic …

Upcycling Commodity Polymers To Advanced Materials For Energy And Environmental Sustainability, Anthony Griffin-Espinoza

Dissertations

Synthetic polymers play an essential role in nearly every aspect of our lives. Extending beyond single-use packaging, polymeric material design has progressed to attain tailorable architectures granting exceptional performance across advanced applications, including carbon-fiber reinforced polymer composites for aerospace, conductive materials for soft electronics, and drug carriers for biomedicine. While highly promising, intricately designed polymers needed to achieve excellent performance often have limited processability, complex synthetic methods, and expensive precursors. Furthermore, due to a lack of recyclability, commodity polymer waste streams result in both environmental impacts and a substantial loss of economic value. This dissertation focuses on developing robust strategies …

Synthesis Of Antibody Functionalized Polyaniline/Polystyrene/N-Gqds Composite Fibermats For Sweat Based Cortisol Biosensing Applications, Ashwin James

Honors Theses

Noninvasive, wearable biosensors capable of detecting stress biomarkers in sweat require electrodes that are flexible, conductive, insoluble in water, and highly sensitive at low concentrations of analyte. In this work, bovine serum albumin blocked and anti-cmab immobilized nitrogen doped graphene quantum dots integrated polyaniline/polystyrene composite fibermat electrodes (BSA/Anti-Cmab/N-GQDs/PANI/PS electrodes) were synthesized and evaluated as a potential platform for an electrochemical cortisol biosensor in sweat based systems. Polyaniline was utilized in order to provide electrical conductivity, while polystyrene served as a carrying polymer for mechanical support and its hydrophobicity. Composite fibermats were manufactured through Forcespinning™, followed by a secondary polyaniline graft …

N-Aryl Phenoxazines As Polymer Supported Photocatalysts, Mary Kathryn Hall

Master's Theses

In photosynthesis, the energy of sunlight is perfectly harnessed to facilitate the production of small molecules that are essential for plant life on earth. Inspired by this model of energy efficiency and simplicity, this work seeks to mimic that ability to use the energy in visible light to perform new and more efficient chemistries. Just like in photosynthesis, photocatalysts can act as chromophores absorbing light to excite electrons opening new pathways for previously untapped reactivity. Recent research has provided a wide range of small molecule reactions that are made possible or easier by the use of a photocatalyst. However, these …

Controlling Properties Of Pmaa Multilayer Hydrogel Microparticles Through Network Structure, Daniel Inman

All ETDs from UAB

Advancements in the fabrication of “smart” stimuli responsive hydrogel microparti-cles have been pivotal in their optimization for applications. The responsiveness of hydro-gel networks to external stimuli enhances the intrinsic properties of hydrogels to increase functionality. Through layer-by-layer assembly, the internal composition, network struc-ture, and surface chemistry of multilayer hydrogels can be directly controlled to introduce new and unique properties. Applicable to a wide variety of shapes and sizes; hydrogel mi-croparticles are versatile for biological interactions, such as, cellular internalization, tissue regeneration, biosensors, and more. Thus, this dissertation will discuss the synthesis of shaped pH-responsive hydrogel microparticles and the investigation of …

A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Techno-Enviro-Economic Approach For Electrification Of Rural And Shrimp Farming Regional Development Of An Isolated Island In Indonesia By Utilizing Hybrid Renewable Energy Systems, Fiqih Akbar Wijaya, Mohammad Akita Indianto

Journal of Materials Exploration and Findings

One of the challenges in developing and archipelagic countries such as Indonesia is maintaining energy demand in rural and isolated areas due to difficulties in electrical distribution. For instance, in areas like Bawean Island, no additional electricity capacity has been introduced in the past year, leading to an unmet potential customer demand. One of the possible options is by utilizing Hybrid Renewable Energy Systems (HRES) that are integrated with existing fossil fuel-based energy systems to support the growing energy demand in the remote island. A case study in Bawean Island is conducted with the projected energy demand covers the energy …

Remaining Life Assessment And Fitness For Service Evaluation Of Aging Chemical Reactors In Polyethylene Terephthalate Resin Industry, Aditya Pahlawan Munthe, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra

Journal of Materials Exploration and Findings

Aging chemical reactors in the polyethylene terephthalate (PET) resin industry require comprehensive evaluation to ensure safe continued operation. This study conducts a remaining life assessment (RLA) and fitness-for-service (FFS) evaluation on five 30-year-old reactors, based on API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div. 1 standards. The analysis involves corrosion rate measurement, future corrosion allowance (FCA) projection, and minimum thickness verification. Among the reactors, R-120 was found to have the shortest remaining life less than 15 years. FFS assessments using three criteria Average Measured Thickness, MAWP from Point Thickness Readings, and Minimum Measured Thickness confirm that R-120 …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Understanding Structure-Property Relationships Within Polyolefin-Derived Vitrimer Systems, Mikaela Sadri

Dissertations

Polyolefins are extremely ubiquitous materials due to their satisfactory material properties, ease of synthesis, and low cost. Unfortunately, their extensive use has led to a global plastic waste mismanagement problem. As such, notable efforts have recently focused on converting these commodity polymers into vitrimers, or dynamic networks, to extend their use-life and tailor their properties. However, the fundamental polymer physics of these emerging materials, remain largely underexplored, hindering their widespread implementation. To address this challenge and enable a more sustainable future, the overarching goal of my dissertation research is to understand the fundamental structure-property relationships within complex polyolefin-derived vitrimer systems. …

Drug Delivery, Disulfide Crosslinked Hydrogel Coating For Polydimethylsiloxane (Pdms) Implant Materials, Paul A. Contos, Paul Anthony Contos

Master's Theses

Though polydimethylsiloxane (PDMS) is often used in medical devices due to its desirable mechanical properties and biocompatibility, its surface is often prone to bacterial adhesion. This is especially a problem for catheters, where bacteria can adhere and form biofilms that can in turn result in Urinary Tract Infections (UTI). In order to deter the presence of UTI causing bacteria on PDMS catheters, methods were developed to formulate a disulfide crosslinked hydrogel coating and create a methodology to allow adhesion to a PDMS substrate. The hydrogel coating discussed in this paper will be synthesized by chemically crosslinking stimuli-responsive vesicles, that carry …

Melts To Solutions: Structure, Dynamics, And Response Of Polyelectrolytes, Shalika Meedin

All Dissertations

The current research elucidates the changes in the structure and motion of polyelectrolytes as they are perturbed by solvents and shear flows. Polyelectrolytes are macromolecules whose backbone consists of long, predominantly hydrocarbon chains, substituted by ionizable groups, which tend to dissociate into ions in polar solvents. Their properties result from a delicate balance of elastic energy that arises from the polymeric backbone and electrostatic forces, which stem from the ionizable groups. Though polyelectrolytes have an immense potential to propel numerous technologies, from clean energy to drug delivery systems, understanding the delicate balance between the properties of the polymer backbone and …

Poly(Pyridinium Salt)S Containing 9,9-Bis(4- Aminophenyl)Fluorene Moieties With Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline And Light-Emitting Properties, Pradip K. Bhowmik, David King, Haesook Han, Andras F. Wacha, Matti Knaapila

Chemistry and Biochemistry Faculty Research

Main-chain conjugated and non-conjugated polyelectrolytes are an important class of materials that have many technological applications ranging from fire-retardant materials to carbon-nanotube composites, nonlinear optical materials, electrochromic materials for smart windows, and optical sensors for biomolecules. Here, we describe a series of poly(pyridinium salt)s-fluorene containing 9,9-bis(4-aminophenyl)fluorene moieties with various organic counterions that were synthesized using ring-transmutation polymerization and metathesis reactions, which are non-conjugated polyelectrolytes. Their chemical structures were characterized by Fourier transform infrared (FTIR), proton (1H) and fluorine 19 (19F) nuclear magnetic resonance (NMR) spectrometers, and elemental analysis. They exhibited polyelectrolytic behavior in dimethyl sulfoxide. Their lyotropic liquid-crystalline phases were …

Structural Color Pigments For Waterborne Coatings, Kyle William Liston

Master's Theses

Structural colors offer unique alternatives to conventional pigments, utilizing their microstructures to produce vibrant colors. These pigments offer an alternative source for colorants without the need for less environmentally friendly conventional pigments. In keeping with the sustainability approach, the use of waterborne coatings was chosen over solvent-based coatings. Here we report the synthesis of brushite platelet, silica supraball, and inverse opal pigments. Brushite platelets were produced through a condensation reaction, while silica supraballs were synthesized via the Stöber process and assembly was attempted using an oil-in-water emulsion. Inverse opal was produced through the templating of silica on poly(methyl methacrylate) (PMMA) …

Catalyzed Chemical Recycling Of Poly(Ethylene Terephthalate) For Enhanced Sustainability, Gilberto J. Hernandez-Leypon Jr.

Master's Theses

Plastics are ubiquitous in the production of consumer and industrial products; their chemical stability, low cost of production, and performance versatility make them the best option for many industries. Their inherent benefits, specifically durability, is the basis for the negative environmental impact of polymers. Improper containment of endof-life polymer products causes unintentional migration into the environment. The monomers for many common polymer types are also fossil fuel based further increasing the environmental impact of the plastic lifecycle. Recycling is a possible method of closing the loop of the plastic lifecycle. Currently most recycling is physical, thermally reprocessing used plastics into …

Myceli-Yum: Elucidating Structure-Property Relationships For Polymer Degradation By Mycelial Digestion, Jordan Scott Ford

Master's Theses

Since the industrial entrance of polymer plastic materials, plastic has become ubiquitous in both everyday use and waste. Due to inefficiencies and knowledge gaps, current recycling methods are not able to account for the high scale of plastic waste, resulting in the bulk of this waste being landfilled, mishandled, and deposited in the environment. Mycelium, the microorganism responsible for fruiting mushroom bodies and mold growth, holds potential to reduce plastic waste and can potentially be utilized as a method of industrial recycling. Following a drug-design approach, the active site of mycelial enzymes responsible for natural biopolymer degradation have been assessed …

Comparing Machine Learning Paired Optimization Strategies For Single-Component Waterborne Direct-To-Metal Coatings, Harvir S. Kalkat

Master's Theses

As R&D attempts to fine tune properties before production, the redesign and testing process can become highly iterative. The repetitive nature of formulating can be difficult to escape when relying on chemical intuition alone. To provide some guidance in this process, machine learning (ML) can leverage data from previous trials¹ to design suggestions for subsequent trials. Although ML capabilities have vastly expanded in the last few years, integration of ML into chemistry R&D and education has been slow. Unraveling the mystique of ML can help change what has been a slow embrace in the coatings industry. It is important …

Complementary Design Of Optical And Photochemical Systems, Joshua Plank

Chemistry Theses and Dissertations

The ability to manipulate chemical systems has been prized through history as the bridge between the macroscopic and microscopic worlds. As an example, the camera obscura has arguably existed since the earliest days of humanity; however, it was the discovery of early silver halide chemistry that lead to the ability to fix these images into the earliest photographs. In modern photolithography employed in electronics manufacturing, the primary resolution limits arise not from the chemistry of the molecules involved, but from the limits of the systems used to project light. Thus, as much as photochemistry advances, optical imaging and projection techniques …

The Effects Of Reprocessing, Post-Processing Conditions, And Environmental Exposure On The Physical Properties Of Post-Industrial And Post-Consumer Polyethylene, Grant M. Howard

Electronic Theses & Dissertations

THE EFFECTS OF REPROCESSING, POST-PROCESSING CONDITIONS, AND ENVIRONMENTAL EXPOSURE ON THE PHYSICAL PROPERTIES OF POST-INDUSTRIAL AND POST-CONSUMER POLYETHYLENE

An Abstract of the Thesis by

Grant Howard

Plastic pollution is a rapidly growing problem. Globally, millions of tons of plastic waste are produced, and that amount is projected to increase each year. To address this, recycling of commodity thermoplastics like polyethylene, polypropylene, and polyethylene terephthalate, have become a point of emphasis in industry. Companies have started to investigate the use of recycled plastics instead of virgin plastics in their products. The advantages of using recycled material are to receive tax breaks, …

Soybean Oil-Derived Acrylate/Methacrylate Ether For High Resolution Additive Manufacturing (3d Printing) Technology, Tanuj Patel

Electronic Theses & Dissertations

Additive Manufacturing is one of the rapidly developing techniques, as industries continue to explore new ways to create prototypes and end-use parts, one of the significant challenges that remains is the reliance on petroleum-based plastics for 3D printing, especially in the production of photocurable resins. that may be used to prototype complex structures and sophisticated geometries that are typically challenging to produce with conventional methods. Thus, replacing petroleum-based plastics with renewable resources is increasingly important for additive manufacturing (3D printing) of photocurable resins. The use of bio-based renewable resources in AM is a feasible alternative to traditional petroleum-based plastics. Henceforth, …

Epoxidized Castor Oil Based Thermosets With Reprocessable And Non Reprocessable Properties, Vaibhav Patel

Electronic Theses & Dissertations

Castor oil-based polymers have gained significant attention due to their renewable nature, low cost, and ease of processing, making them ideal for various applications, including biofuels and the petrochemical industry. Among these, epoxidized castor oil (ECO)-based thermosets have been extensively studied for their promising mechanical and thermal properties. This study focuses on recent advancements in ECO thermosets synthesized with 4,4-dithiodianiline (DTDA) which has aromatic disulfide bonds and 4,4-ditaminodiphenylmethane (DMPM) which has methylene bridge. FTIR spectroscopy confirmed the successful incorporation of epoxy functionalities into castor oil. The structure-reactivity relationship was examined through differential scanning calorimetry (DSC), which reveals that ECO_DMPM based …

Bio-Based Composites With Enhanced Mechanical Strength And Flame Retardancy, Riya Patel

Electronic Theses & Dissertations

Composites are versatile and useful in many fields, including aerospace, automotive, construction, and healthcare, due to their high mechanical strength. It is common practice to synthesize these materials using petroleum-based chemicals. Nonetheless, in the twenty-first century, scientists are more interested in using renewable resources to create composites. The greatest substitute for petroleum-based chemicals is vegetable oil. It has unsaturated double bonds that are modifiable chemically. In the present study, bio-polyol was synthesized using castor oil, an inedible vegetable oil. A ring-opening process was used to modify it and produce castor oil-based polyol. The synthesized castor oil-based polyol was characterized by …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …