Polymer Chemistry Commons^™

Investigating The Synthesis And Antibacterial Activity Of A Main-Chain Cationic Polymer, Emily Smith

Honors Theses

Antibiotic resistance is a growing threat to public health. Due to the overuse of antibiotics in agriculture, the overprescription of antibiotics, and the misuse of antibiotics by patients, antibiotic resistance is spreading at an alarming rate. As antibiotic resistance spreads, the antibiotics we depend on to treat common infections become ineffective. Therefore, it is imperative to develop novel treatments for infections that do not increase the prevalence of antibiotic resistance. One treatment being explored is the use of synthetic polymers with antibacterial properties. Synthetic polymers are advantageous because they can be synthesized from widely available precursors and their structure is …

Synthesis Of Antibody Functionalized Polyaniline/Polystyrene/N-Gqds Composite Fibermats For Sweat Based Cortisol Biosensing Applications, Ashwin James

Honors Theses

Noninvasive, wearable biosensors capable of detecting stress biomarkers in sweat require electrodes that are flexible, conductive, insoluble in water, and highly sensitive at low concentrations of analyte. In this work, bovine serum albumin blocked and anti-cmab immobilized nitrogen doped graphene quantum dots integrated polyaniline/polystyrene composite fibermat electrodes (BSA/Anti-Cmab/N-GQDs/PANI/PS electrodes) were synthesized and evaluated as a potential platform for an electrochemical cortisol biosensor in sweat based systems. Polyaniline was utilized in order to provide electrical conductivity, while polystyrene served as a carrying polymer for mechanical support and its hydrophobicity. Composite fibermats were manufactured through Forcespinning™, followed by a secondary polyaniline graft …

Effects Of Structure Of Mepegn Polymers On Hydroxide Conductivity In Anhydrous Anionic Exchange Membranes, Athan M. Gregory

Honors Theses

Anhydrous hydroxide ion (OH-) conducting polymer electrolytes composed of a 1-methyl-pyrrolidinium (1mp) head group linked to various MePEGn (n = 3, 7, 12) backbones were prepared. We have examined the structure of these anion exchange membranes to observe how the structure of the electrolyte affects the observed ionic conductivity. The structural parameters investigated were polymer length, viscosity, fractional free volume (FFV), and volume fraction of PEG (Vf,PEG), and each polymer varied in these properties. Through a comparison of the conductivity and structural parameters in the MePEGn-based anion electrolytes, we have shown that each of these structural properties weakly affects the …

Synthesis Of Single Chain Polymer Nanoparticle Networks By Reinitiating Raft Polymerization, Dallas Donovan

Honors Theses

Hydrogel materials, which are polymer networks comprised mostly of water, hold significant promise for biomedical applications due to their compatibility with biological systems. Conventional hydrogel materials are often brittle and weak, but most applications in biomedical systems require materials to be strong and tough. The topology of a polymer network dictates its mechanical properties. An important strategy for designing tougher hydrogels is the release of stored length, such as from the unfolding of polyprotein cross-linkers. Inspired by the success of the strategy, we report progress towards a fully synthetic design using single chain nanoparticles (SCNPs) into a hydrogel. SCNPs, which …

Linear Polydicyclopentadiene Copolymers: Synthesis And Thermal Properties, Connor Lewis

Honors Theses

No abstract provided.

Biomimetic Design Of Mechanochromic Single-Chain Nanoparticle Polymer Networks, Samuel Robinson

Honors Theses

Hydrogels are a class of polymer networks that show promise in many biomedical applications but are typically limited in use due to their brittle nature. Synthesizing hydrogel networks that are comparable to biological materials has long been an area of interest. In this study, we are working to create a polymer network inspired by the muscular protein, titin. Titin can unfold under mechanical tension, releasing stored length, making the muscle material extensible and durable. To mimic this behavior, we propose creating a polymer network with similar stored length using single chain nanoparticles (SCNPs) cross-linked with phenolphthalein (PP) and β-cyclodextrin (β-CD). …

Tailoring The Morphology Of Block Copolymers Via Solvent-Vapor Annealing, Bayleigh Madelin Loving

Honors Theses

Triblock polystyrene-polyisobutylene-polystyrene (PS-PIB-PS) copolymers have widespread applications from thermoplastic elastomers to protective coatings for ballistic applications. The incompatibility between the soft PIB and hard PS phases leads to phase separation and subsequent formation of morphological domains like lamellae and cylinders. The structures are stabilized by physical crosslinks, which can greatly improve the toughness of the triblock systems by preventing chain pullout during tensile deformation. We tailored the morphologies (achieving different morphologies with the same block copolymer) by changing the annealing conditions of the block copolymers. Solvent vapor annealing was used to selectively activate the mobility of a particular block, causing …

Compatible Blends Of N-Type Polymer Semiconductors: Impact On The Morphology And Mechanics Of Flexible Optoelectronics, Zachary C. Ahmad

Honors Theses

Conjugated polymers offer the potential for the development of robust, low-cost electronics, but achieving high mechanical deformability and high charge transport simultaneously in polymer semiconductors remains a significant challenge. In this work, blends of conjugated polymers were investigated to elucidate the influence of compatible conjugated blends on polymer morphology, mechanics, and electrical properties (using a partially conjugated polymer as the soft matrix and a fully conjugated polymer as the electrically active component). This work achieves a fundamental understanding of blend morphology for these similar components by establishing the framework for how they deform with strain. Grazing-incidence wide-angle X-ray scattering (GIWAXS) …

Synthesis And Study Of Unsymmetrical Bidentate Bis(Phosphino)Pyrrole Ligands And Their Transition Metal Complexes, Julia F. Vidlak

Honors Theses

Our laboratory has reported the synthesis and characterization of a broad library of unsymmetrical bidentate bis(phosphino)pyrrole (BPP) ancillary ligands for use in nickel-catalyzed cross-coupling reactions. The electronic and steric properties of nickel complexes bearing these ligands are examined, and our data support the hypothesis that these ligands produce nickel complexes with electron-deficient metal centers. The syntheses of (BPP)Ni(o-tolyl)Cl precatalysts for utilization in nickel-catalyzed Buchwald-Hartwig Amination are described, and preliminary reactivity studies reveal that (BPP)Ni(o-tolyl)Cl precatalysts are effective in promoting C–N cross-coupling reactions. Finally, we report steric measurements and electronic properties obtained from computed (BPP)NiCl2 and (BPP)Ni(CO)2 complexes, respectively. Additional reactivity …

End Group Modification Of Linear Dendritic Block Copolymers (Ldbcs), Chinwe Udemgba

Honors Theses

Linear dendritic block copolymers are amphiphilic molecules that consist of a dendritic hydrophilic portion and a linear hydrophobic portion. Its unique ability to self-assemble into spherical nanoaggregates while having the potential to uptake and transport both hydrophilic and hydrophobic drugs makes these polymers an item of interest in regard to the drug delivery field. The synthesis of polyamidoamine-polylactide linear dendritic block copolymers was designed to address the common issues in drug delivery systems, including problems in permeability, solubility, stability, specificity, and retention. Though this linear dendritic block copolymer has previously been synthesized in our lab with cationic amine surface functionalities, …

A Conductivity Analysis Of A Newly Synthesized Poly(Ethylene Glycol) Methyl Ether Hydroxide Electrolyte, Sarah Marie Peterson

Honors Theses

This thesis investigates the synthesis and conductive properties of a Poly (ethylene glycol) methyl ether-based polymer electrolyte. The goal of the synthesis is to enhance the hydroxide ion conduction properties of the polymer with its cationic groups attached. The MePEG backbone contained seven ethylene glycol groups and was modified to substitute the hydroxide group in the MePEG with trimethylamine. In addition, the bromide added in the synthesis was exchanged for hydroxide ions to allow for the transportation of hydroxide ions in polymeric electrolytes that can be used in Anion Exchange Membrane Fuel Cells. The newly synthesized polymer was compared to …

Synthesis And Conductivity Analysis Of A Methyl (Polyethylene Glycol) Comb Polymer, Olivia Fox

Honors Theses

The overall goal of work in this field is to improve materials for use in a variety of applications in fuel cell and battery production. This thesis specifically investigates the synthesis of two variations of a methyl (polyethylene glycol) comb polymer electrolyte (MePEG_nwhere n=7) to understand how the molecular structure of an ion-conducting polymer affects its electrochemical properties. The MePEG used in this synthesis contains seven ethylene glycol groups and was added to a poly (methylhydrosiloxane) comb polymer backbone. In the first sample, the polymer contained only the MePEG sidechain, and in the second sample, the polymer contained …

Synthesis Of Polyethylene Glycol - Trifluoromethyl Sulfonamide And Analysis Of Its Ion-Transport Properties, Andrew Groneck

Honors Theses

This project investigates the synthetic pathway to develop a polyethylene glycol – trifluoromethyl sulfonamide compound to be used as an electrolyte in a proton exchange membrane fuel cell. The inspiration to develop a trifluoromethyl sulfonamide compound tethered to a polyethylene glycol polymer was inspired by the work of David P. Siska and D. F. Shriver in their studies of polysiloxane – trifluoromethyl sulfonamide electrolytes.

In this thesis, I have developed the synthesis of MePEG7-Trifluoromethyl sulfonamide (MePEG7-NHSO2CF3) from monomethylpolyethylene glycol (MePEG7OH). Unfortunately, due to the COVID-19 pandemic, I was unable to complete the depronation and ion-exchange to the Li+ and H+ …

The Synthesis Of A Mepeg-Based Hydroxide Conducting Electrolyte And The Optimization Of The Mepeg-Tosylation Reaction, Andrew Ladner

Honors Theses

As society is becoming increasingly aware of the effects of climate change and the ever-looming threat of a fuel shortage, exploring green and renewable alternative energy production, such as fuel cells, is paramount. This project investigates the synthesis of a polyethylene glycol monomethyl ether (MePEG_n) based polymer as well as the optimization of the MePEG Tosylation reaction. The MePEG explored contains seven polymerized ethoxy groups (MePEG₇). The MePEG₇ polymer was modified by substituting a positively-charged trimethylamine group in the place of the alcohol functional group at the end of the PEG chain. The reason for …

Discriminating Azo Dyes: Conjugated Polymers, The Inner Filter Effect, And Array Sensors, Erin Crater

Honors Theses

Azo dyes are abundant pollutants that contaminate water supplies and threaten humans, biota, and ecosystem health. Their detection and discrimination are an incredible challenge due to the structural, chemical, and optical similarities between dyes, the complexity of the wastewater environment in which they are found, and their low environmental concentrations. In this work, the inner filter effect (IFE), combined with conjugated polymer array-based sensing, is utilized for the quantitative profiling of these pollutants. The array was constructed using three fluorescent, anionic conjugated polyelectrolytes whose varying spectroscopic properties led to distinct IFE patterns in the presence of the dyes. The unique …

Synthesis, Characterization, And Utilization Of Iron Ii Ion Sensing Fluorescent Probes For Detection Of Early Onset Anodic Corrosion, Dane N. Wedgeworth

Honors Theses

Corrosion effects can be seen in infrastructure all around the world. From rusted bridges, ships, and other steel surfaces, the price of corrosion adds up quickly with repairs, maintenance, and complete replacement. Common approaches to corrosion detection and prevention require slow, optical inspection to begin the repair and maintenance process, which can also be very slow and costly. However, recent literature suggests that metal chelating probes can yield new understanding of the processes of corrosion faster and with greater specificity in location and diversity in mechanisms for early onset of corrosion. Earlier corrosion detection can be characterized by several ways. …

Pro-Antimicrobial Networks Prepared Via Degradable Thiol-Ene Acetal Photopolymerization, Sarah Swilley

Honors Theses

A degradable, antimicrobial polymer network with acetal crosslink junctions derived from p-anisaldehyde (pA), a common constituent found in star anise extract, is reported. The p-anisaldehyde was converted into a bis-functional acetal alkene monomer, which serves as a pro-antimicrobial form of the active aldehyde and a building block for materials referred to as pro-antimicrobial polymer networks via degradable acetals (PANDAs). Subsequently, the bis-functional acetal alkene monomer was photopolymerized with a multifunctional thiol to yield a thiol-ene network. PANDAs exhibit surface erosion behavior and yield sustained release of pA over 38 days when exposed to neutral or biologically relevant conditions. The pA …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Synthesis Of Polythioether Nanoparticles Via Thiol-Alkene/Alkyne Photopolymerization In Miniemulsion, Susan E. Walley

Honors Theses

Emulsion-based processes – such as miniemulsion polymerizations – provide well-studied synthetic routes to polymer nanomaterials. Miniemulsion polymerizations are characterized as aqueous dispersions of small, narrowly distributed monomer droplets created through high shear and stabilized against Ostwald ripening/collisional degradation by addition of an appropriate surfactant and costabilizer. In this work, thiol–alkene/alkyne photopolymerization in miniemulsion is demonstrated as a simple, rapid, and one-pot synthetic approach to polythioether nanoparticles with tuneable particle size and clickable functionality. Nanoparticles with mean particle diameters ranging from 45 nm to 200 nm were synthesized through simple modifications to the miniemulsion formulation and processing parameters. Facile access to …

Characterization Of Epoxy/Amine Networks With Glycidal Polyhedral Oligomeric Silsesquioxane Surface Modified Silica Nanoparticles, Reese K. Sloan

Honors Theses

Silica nanoparticles were surface modified with octa-functional glycidal polyhedral oligomeric silsesquioxane (G-POSS) and incorporated into an epoxy/amine system in an effort to increase the mechanical performance of the inorganic/organic hybrid material. The silica nanoparticles were first functionalized with 3-aminoprpyltrimethoxysilane (APTMOS) at 5 and 10 weight percent, and then modified with G-POSS at ratios of 1:10 and 1:5 (APTMOS: G-POSS). The modified particles were then incorporated into an epoxy/amine network consisting of diglycidyl ether of bisphenol A (DGEBA) and aromatic amine, diamine diphenyl sulfone (4,4’ DDS) at 1 and 5 weight percent, resulting in 8 different formulations. The incorporation of the …

Functionalizing Β-Cyano Oligo(P-Phenylene Vinylene) Chromophores For Use In Mechanochromic Materials, Alexander J. Wink

Honors Theses

Mechanochromic materials are materials that change color upon mechanical deformation. This concept can be applied in areas of quality control, since the knowledge of damaged parts will easily be detected due to a color change in the material that has undergone deformation. Typically these types of materials are enabled by employing functional small molecules. Often, these are conjugated organic molecules or chromophores, which fluoresce different colors determined by the stimulus (or lack thereof) acting upon the material. In this work, we explore a new avenue to elicit color changes in polymeric materials based on the process of restriction of intramolecular …

The Effect Of Acrylic Acid On Ring Formation In Polyacrylonitrile, Elisha Cade Willis

Honors Theses

The addition of comonomers into carbon fiber precursor, polyacrylonitrile (PAN), has shown to have effects on the extent of stabilization and thermal behavior.1 Acrylic Acid (AA) was added at varying initial apparent weight percent and added via semibatch reaction to copolymerize with acrylonitrile to form carbon fiber precursor. Accompanying batch reactions were synthesized for comparison. Degradation was found to be greater in the semibatch reactions although overall was comparable to the batch reactions. Differential scanning calorimetry (DSC) confirmed the addition of higher concentrations of AA into the reaction resulted in a less intense exotherm upon cyclization, along with a greater …

Synthesis Of Acceptors For Use In Donor-Acceptor Copolymers And Characterization Of These Polymers, William D. Walker

Honors Theses

In this thesis, a selenium-derivatized acceptor was synthesized to examine the heavy atom effects of selenium on the position of the frontier molecular orbitals (HOMO/LUMO band gap) as opposed to sulfur in a donor-acceptor copolymer for use in light harvesting and detection applications. Over the course of this research, standard operating protocols for ultraviolet-visible (UV-Vis-NIR) and Fourier transform infrared (FT-IR) spectroscopies, as well as cyclic voltammetry (CV) characterization techniques were established. Once synthesized, the polymers were characterized through use of the established characterization protocols. The selenium-derivatized polymer exhibited a bathochromic shift compared to the sulfur analogue, with a solid-state absorption …

Using Intrinsic Properties Of Polyaniline To Sense Expression Of The Microrna Let-7, Jared N. Gloria

Honors Theses

MicroRNAs are approximately 22-nucleotide long RNA molecules that function through decay and translational repression of messenger RNA. The microRNA let-7 is found to play a role in maintaining the fate of differentiated cells in humans. Thus, expression level of this microRNA is a reliable biomarker of tumor cell phenotype. However, there are significant limitations in the current profiling techniques of microRNA. The current methods like northern blotting, microarrays, RT-PCR, or using locked nucleic acid (LNA) for in-situ hybridization are either laborious, semi-quantitative, or expensive. In this research we try to address this issue by developing a fast, specific, and inexpensive …

Biomimetic Adhesive Thiol-Ene Films For Improved Adhesion, Laken L. Kendrick

Honors Theses

Current dental restoration materials fall short in adhesion and often pull away from the surface of the tooth upon curing. This project seeks to design polymers that can adhere to wet, heterogeneous surfaces as potential materials for dental restoration applications. The goal of this project is to mimic the structure and adhesive properties of natural adhesives containing 3,4-dihydroxyphenyl-L-alanine (DOPA). We will synthesize mono- and di-functional DOPA derivatives with catechol functionality and investigate their adhesion compared to their non-catechol-containing alternative through incorporation into a model thiol-ene photopolymerization. Functional group conversion, real time kinetics, and adhesion data will be used to analyze …

Analysis Of The Mechanical Properties Of Dgebf/4,4’-Dds Thermoset Systems As A Function Of Cure Rate, Chase B. Thompson

Honors Theses

The relationship between macroscopic mechanical and thermal properties and ramp rate during cure of epoxy-amine systems consisting of the epoxide resin digylcidyl ether of bisphenol F (DGEBF, provided Hexion specialty chemicals) and 4,4-diaminodiphenyl sulfone (4,4-DDS, provided by Atul Sulpho) were probed using Dynamic Mechanical Analysis (DMA), Positron Annihilation Lifetime Spectroscopy (PALS), and compression testing. These systems were cured in a programmable oven; the samples were heated from 35°C to 180°C at ramp rates of 0.5, 1.0, 1.5, 2.0, 2.5, 5.0, 10, and 15°C/min. Even as the ramp rates during the cure of these materials was changed, there was very little …

Polymerization Of Blocked Isocyanate Functional Polymer Surfaces And Post-Polymerization Modification By Thiol-Isocyanate Reactions, Chase A. Tretbar

Honors Theses

Direct polymerization of isocyanate-functional monomers has been achieved with controlled radical polymerizations (CRP) for precisely engineered modification platforms with highly reactive side chains. However, despite the success of these strategies, the inherent reactivity of isocyanates still leads to adverse side reactions, such as hydrolysis, that are difficult to suppress. Phenol, lactam, and oxime-based blocking agents have been used to limit the reactivity of isocyanates in applications such as multicomponent urethane coating systems. The reactivity of these blocked isocyanates can be restored by thermal deprotection of the blocking agent to achieve the desired reactions. In this work, we use blocked isocyanate-functional …

Effects Of Varying The Cure Profiles Of An Epoxy-Amine System, Patrick W. Hollingsworth

Honors Theses

The cure of an epoxy prepolymer with an amine hardener induces stress in thermosetting systems. The extent of residual stresses in the cured epoxy-amine thermosets are dependent on several factors; one of which is the cure profile utilized. The effect of cure profile on cure induced stresses of an epoxy-amine thermoset was examined in the current study. A difunctional epoxide based on diglycidyl ether of bisphenol-A (DGEBA) and a tetrafunctional amine curative were used to conduct this study. Two cure profiles were selected to prepare samples of varying degrees of stress in the cured thermosets. The first was constant heating …

Raft Polymerization Of Sulfonamide-Containing Methacrylamides, Michael B. Sims

Honors Theses

Targeted delivery of cancer therapeutics offers an exciting new opportunity for utilization of controlled polymerization techniques. However, a major obstacle in achieving the desired therapeutic effect is facilitating endosomal release of active agents following endocytosis. Peptides and pH-responsive polymers have been utilized as a means of triggering endosomal release via phase transition-induced membrane disruption. Unfortunately, the fidelity by which the pKa of these polymers/peptides can be varied is limited, such that it reduces their versatility in altering the phase transition point to best match the endosomal pH of a particular cell-type. Herein, we report the controlled polymerization of library of …