Polymer Chemistry Commons^™

Solid-State Crystallization Of Zeolites And Their Use In Plastic Upcycling Applications, Yixin Liao

Doctoral Dissertations

Plastics have been an irreplaceable component of modern technology as well as everyday life. They have brought much convenience to us with their characteristics of great malleability, durability, and stability. The versatile and low-cost nature of plastics also enables their wide engagement in many modern industries including automobile, medical, communication as well as aerospace. Polyethylene (“PE”), made from polymerization of ethylene, is one of the most widely used plastics in the world. Being cheap, flexible, and long-lasting, they are extensively used in the packaging industry, especially for plastic bags and other sorts of containers. However, the durability of plastics, on …

Polybenzodiazine Aerogels: All-Nitrogen Analogues Of Polybenzoxazines - Synthesis, Characterization, And Their Application In Carbon Dioxide Capture, Vaibhav Edlabadkar

Doctoral Dissertations

"The rapidly risen concentration of carbon dioxide in the atmosphere over recent years contributed to global warming and ocean acidification. Carbon capture is viewed as an essential tool from keeping atmospheric CO₂ levels from rising further. This thesis focuses on the development of new materials for high capacity and selective adsorption of CO₂. One such material was based on a newly synthesized tetrahydroquinazoline (THQ), which was designed as an all-nitrogen analogue of main-stream benzoxazine monomers. THQ solutions in DMF gelled at 100 °C via HCl-catalyzed ring opening polymerization to polybenzodiazine (PBDAZ) wet gels, which were dried in …

Development Of High-Performance Hydrogels, Buddhabhushan Salunkhe

Doctoral Dissertations

Here, we present a systematic approach to design robust hydrogel compositions. The goal was to achieve excellent properties to open up new opportunities in especially two challenging applications not previously well-served by hydrogels.

The first part of this research will discuss the systematic screening of polymers for their hydrothermal stability under brine, acidic, neutral, and basic pH conditions followed by novel designs of hydrogel compositions. Certain hydrogel compositions withstand temperatures of up to 150 °C for more than 24 months in high salinity brines. This novel hydrogel composition fills a technology gap between the existing polyacrylamide-based preformed particle gels (PPGs) …

Nanomorphology Dependent Optical And Mechanical Properties Of Aerogels, Chandana Mandal

Doctoral Dissertations

"Aerogels are very low density, light weight open pore materials. A hypothesis that is under intense current investigation by the scientific community states that the mechanical properties of nanostructured polymers depend on their nanomorphology. Aerogels are nanostructured ultra-lightweight nanoporous materials with skeletal frameworks that can display a wide range of nanomorphologies. Thereby aerogels comprise a suitable platform for testing not only that hypothesis but also a wide range of other properties such as light scattering for applications, for example, in thermally insulating windows.

To study the mechanical properties of nanostructured matter as a function of nanomorphology, various shape-memory polyurethane aerogels …

Synthesis And Applications Of Ceramic (Silicon Carbide And Silicon Nitride), Metallic (Cobalt(0)) And Polymeric (Polyurethane) Aerogels, Parwani M. Rewatkar

Doctoral Dissertations

"A new method has been demonstrated for the synthesis of monolithic ceramic and purely metallic aerogels from xerogel powder compacts, and the use of polyurethane aerogels based on cyclodextrins as efficient desiccants.

I. Highly porous ( > 80%) monolithic SiC and Si₃N₄, aerogels were prepared from compressed compacts of polyurea-crosslinked silica xerogel powders. The process is time efficient as solvent-exchange through powders is fast, and energy efficient as it bypasses drying with supercritical fluids. The final ceramic objects were chemically pure, sturdy, with compressive moduli at 37 ±7 MPa and 59 ± 7 MPa, and thermal conductivities …

Polyurea Aerogels: From Nanoscopic To Macroscopic Properties, Tahereh Taghvaee

Doctoral Dissertations

"The morphology of a material is intrinsically a qualitative property and in order to relate nanomorphology to synthetic conditions, it is necessary to express nano/micro-structure quantitatively. In this context, polyurea aerogels were chosen as a model system with demonstrated potential for rich nanomorphology and being guided by a statistical Design-of-Experiments model, a large array of materials (208) with identical chemical composition, but quite different nanostructures were prepared. By reflecting upon the SEM images, it was realized that our first pre-verbal impression about a nanostructure is related to its openness and texture; the former is quantified by porosity (Π), and the …

Synthesis, Characterization And Application Of Acrylic Colloidal Unimolecular Polymer (Cup), Ameya Manohar Natu

Doctoral Dissertations

"Colloidal Unimolecular Polymer (CUP) particles were prepared by the process of water reduction on amphiphilic acrylic copolymers prepared via free radical polymerization technique. The formation of CUP particles was driven by the polymer-polymer interaction being greater than the polymer-solvent interaction and entropically favored by release of the water. It was demonstrated by Dynamic Light Scattering technique that CUP particles based on copolymers below 13,000 MW were unstable and the particles aggregated to a higher particle size. For the polymers with molecular weight (MW) above 13,000, a good correlation between the theoretical and experimental CUP particle size was observed. The rheology …

Mechanical Characteristics Of Organically Modified Fly Ash-Kaolinite Mixtures, Xin Kang

Doctoral Dissertations

"Fly ash is a hazardous waste material to the environment. Beneficial reuse of fly ash, however, brings economic and environmental benefits, i.e., decreases the cost of disposal, reduces greenhouse gas emission, and improves mechanical properties of construction materials. Due to the lack of pozzolanic properties, the reuse rate of Class F fly ash in geotechnical engineering is relatively low (ACAA 2013). In order to promote the effectiveness and sustainability of high volume reuse of class F fly ash in geotechnical engineering, biopolymers (Chitosan, and Xanthan gum) and synthetic polymers (Polyethylene Oxide, PEO) were used instead of the traditional stabilizers to …

The Synthesis And Characterization Of Water-Reducible Nanoscale Colloidal Unimolecular Polymer (Cup) Particles, Cynthia J. Riddles

Doctoral Dissertations

"The coatings industry has adapted to more stringent guidelines in paint formulations. Current VOC (volatile organic compound) limits placed by the federal government have pushed the industry toward the development of paint formulations which have very little to no VOC's. The development of Colloidal Unimolecular Polymer (CUP) particles is a step in the direction of providing a resin system which exists in zero VOC aqueous dispersion.

The CUP particles are a part of the polymer field of Single Chain Nano Particles (SCNP) and ranged in diameters of 3-9 nm. The research presented in this dissertation describes the synthesis and design …

Application Of Colloidal Unimolecular Polymer (Cup) Particles In Coatings, Sagar Vijay Gade

Doctoral Dissertations

"Colloidal unimolecular polymer (CUP) particles were prepared by the process of water reduction on copolymers containing hydrophobic and hydrophilic monomers at definite ratio using free radical polymerization. The CUPs are formed by the effect of hydrophilic /hydrophobic interactions of the polymer with a change in the solvent environment around them. Once formed these colloidal particles are thermodynamically stable with collapsed hydrophobic groups forming a spheroidal core and hydrophilic charges on the surface stabilizing the particle by the charge repulsion. CUPs contain only the charged CUP particles, water and counterions with all the functionality on the surface for further chemistry. CUP …

Computational Studies Of Ion Transport In Polymer Electrolytes, Hui Wu

Doctoral Dissertations

Improving ionic conductivity and lithium mobility in polymer electrolytes is important for their practical use for battery electrolytes. In this study, a combination of molecular dynamics and Monte Carlo simulations was used to bring insight into lithium ion transport in poly(ethylene oxide) (PEO) with plasticizers and also next to alumina solid surface doped with lithium salt. The simulations were performed using a moderately high molecular weight polymer (Mn = 10,000 g/mol) at an EO:Li ratio of 15. For the plasticized system, the PEO with LiN(CF3SO 2)2 (LiTFSI) was mixed with 10 wt% plasticizers that included either cyclic ethylene carbonate …

Chasing Μ, Joseph P. Cannon

Doctoral Dissertations

Conducting and semiconducting, π-conjugated polymers are promising materials for micro- and nano-optoelectronic applications because of their widely tunable physical, electrical, and optical properties. These polymers have been used to fabricate a number of electronic devices including field-effect transistors, light-emitting diodes, and photovoltaic cells. However, widespread commercial application of these devices has yet to be realized, due in part to poor electronic transport characteristics and device degradation.

Nanostructuring of conjugated polymers by various methods has demonstrated marked improvements in molecular ordering and electronic transport. In this research, nanoscale, tubular structures of semiconducting polymers fabricated by template wetting nanofabrication procedures are explored. …

Poly(Ethylenedioxythiophene) Based Electronic Devices For Sensor Applications, Jie Liu

Doctoral Dissertations

Organic electronic devices, based on Poly (3,4-ethylenedioxythiophene)-Poly (styrene sulfonic acid) (PEDOT-PSS) as the active layer for sensor applications, have been studied. Two sets of sensors have been developed. In one case, sensors consisting of PEDOT-PSS resistors have been realized and demonstrated for soil moisture monitoring. The resistor model for the soil moisture sensor enables the sensor device to be fabricated at low cost and easily tested with a simple structure. Unlike the large dimension device used in Time Domain Reflectometry (TDR), the sensors are small and are capable of capturing microscale behavior of moisture in soil which is useful for …