Open Access. Powered by Scholars. Published by Universities.®

Polymer Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

University of Malaya

Discipline
Keyword
Publication Year
Publication

Articles 1 - 14 of 14

Full-Text Articles in Polymer Chemistry

Plastic Crystal - Gel Polymer Electrolytes For Magnesium Rechargeable Batteries, Diyana Hambali Dec 2020

Plastic Crystal - Gel Polymer Electrolytes For Magnesium Rechargeable Batteries, Diyana Hambali

Student Works (2020-2029)

Polymer electrolytes are known to be the possible substitution for liquid electrolytes due to their excellent safe performance and good compatibility with electrodes compared to its liquid counterpart. Thus, in the present work, gel polymer electrolytes (GPEs) have been studied comprising plastic crystal succinonitrile (SN) to form plastic crystal - gel polymer electrolytes. The GPEs were prepared by using two types of magnesium salts which are magnesium trifluoromethanesulfonate (MgTf2) and magnesium bis(trifluoromethanesulfonimide) (Mg(TFSI)2) varied from 5 to 30 wt.%. In the preparation of GPEs, four GPE systems were introduced which are single plasticized systems (PVdC-co-AN/SN/MgTf2 and PVdC-co-AN/SN/Mg(TFSI)2) and double plasticized …

Go to article

Synthesis And Characterization Of Water-Soluble Polyaniline For Hydrazine Detection / Hazira Hussin, Hazira Hussin Sep 2020

Synthesis And Characterization Of Water-Soluble Polyaniline For Hydrazine Detection / Hazira Hussin, Hazira Hussin

Student Works (2020-2029)

In this study, polyaniline (PAni) was synthesized through the chemical oxidation method using aniline (Ani) as a monomer, hydrochloric acid (HCl) as a dopant, and ammonium persulphate (APS) as an initiator. PAni was rendered water soluble through treating with cellulose derivatives. Cellulose derivatives such as methylcellulose (MC), hydroxypropyl cellulose (HPC), and hydroxypropyl methylcellulose (HPMC) were used as a stabilizer to improve the solubility of PAni in an aqueous medium. The water-soluble PAni-cellulose derivative was applied as a chemical sensor for hydrazine detection. The chemical structures and electrical conducting behaviours of PAni-cellulose derivatives were investigated using Fourier transform infrared (FTIR) and …

Go to article

Synthesis Of Polyaniline Modified With Palm Oil Based Alkyd As Counter Electrode In Solar Cell Application, Ramli Mariam Fadzlina Aug 2020

Synthesis Of Polyaniline Modified With Palm Oil Based Alkyd As Counter Electrode In Solar Cell Application, Ramli Mariam Fadzlina

Student Works (2020-2029)

Presently, shortage of sustainable and environmental friendly energy resources has become an important global concern. Dye-sensitized solar cell (DSSC) has widely been used as a clean energy conversion device that can solve this problem. Platinum (Pt) has commonly been used as counter electrode (CE) in DSSC due to its good redox property. However, Pt is expensive and could be easily corroded in tri-iodide solution. Recently, polyaniline (PAni) has shown promising performance in DSSC, but PAni exhibit poor adhesion on fluorine-doped tin oxide (FTO) substrate. In this study, an environmental friendly CE was developed by modifying PAni using titanium dioxide (TiO2) …

Go to article

Development Of Plasticized Methylcellulosepotato Starch Blend Based Polymer Electrolytes For Protonic Cell And Supercapacitor Applications, Hamsan Muhamad Hafiz Aug 2020

Development Of Plasticized Methylcellulosepotato Starch Blend Based Polymer Electrolytes For Protonic Cell And Supercapacitor Applications, Hamsan Muhamad Hafiz

Student Works (2020-2029)

In the current work, the preparation of the polymer electrolyte (PE) systems consists of methylcellulose-potato starch polymer matrix, ammonium nitrate (NH4NO3) as ionic source and glycerol as plasticizer are done by solution cast technique. X-ray diffraction (XRD) has shown that blend with 60 wt.% methylcellulose and 40 wt.% potato starch possesses the lowest degree of crystallinity. The possible interactions within the PE are verified using Fourier transform infrared (FTIR) spectroscopy. As the concentration of NH4NO3 is at 30 wt.%, the conductivity is optimized up to (4.37 ± 0.16) × 10-5 S cm-1 and then maximized to (1.26 ± 0.1) × …

Go to article

The Synthesis Of Urethane Acrylate Resin From Palm Fatty Acid Distillate And Some Mechanical Properties, Kim Teck Teo May 2020

The Synthesis Of Urethane Acrylate Resin From Palm Fatty Acid Distillate And Some Mechanical Properties, Kim Teck Teo

Student Works (2020-2029)

Depletion of petroleum reserves and increasing environmental concerns have stimulated the efforts to explore materials from readily available, renewable natural resources, such as carbohydrates, oils, fats and proteins. Plant oil and its fatty acids are promising renewable resources to produce environmentally friendly polymeric materials. Palm oil is a major crop in Malaysia and consequently palm fatty acid distillate (PFAD) has been an abundant by-product during the refinery process. PFAD could be a renewable raw material for industrial application. Thus, we develop new PFAD-based acrylate resins UV curable for coatings applications. The resins could be produced by two approaches. Firstly, mixtures …

Go to article

Synthesis Of Chemically Produced Toner (Cpt) By Emulsion Aggregation Process., Ng Wei Goon Apr 2010

Synthesis Of Chemically Produced Toner (Cpt) By Emulsion Aggregation Process., Ng Wei Goon

Student Works (2010-2019)

This project studied the full process of producing Chemically Produced Toner (CPT) used in laser printer. Latex particles of 0.40 to 0.60 μm were prepared by semicontinuous emulsion polymerization process. A series of latexes was made from the copolymerization of styrene, butyl acrylate and acrylic acid monomers in the presence of surfactants Dowfax 2A1 (anionic) and Ipegal 897 (non-ionic) surfactants with potassium persulphate as the initiator. The addition of different percentage of chain transfer agent (CTA), 1-dodecanethiol was used to control the molecular weight distribution. As the percentage of CTA was increased, the molecular weight and glass transition temperature decreased …

Go to article

Preparation Of Styrene Acrylic Copolymer Toner Resin By Solution Polymerization., Neo Su Siang Apr 2010

Preparation Of Styrene Acrylic Copolymer Toner Resin By Solution Polymerization., Neo Su Siang

Student Works (2010-2019)

This project has investigated solution polymerization to produce toner resins. There are three stages: (i) synthesis of low molecular weight styrene acrylic copolymer; (ii) synthesis of high molecular weight styrene acrylic copolymer; (iii) mixing high and low molecular weight copolymers. Gel Permeation Chromatography (GPC) was used to study molecular weight distributions, Melt Flow Index (MFI) Instrument to study the flowability of resin, Differential Scanning Calorimetry (DSC) to study the thermal properties of resin, and acid number to quantitate the amount of acidic group in the resin. A comparison of properties between the experimental samples, patent’s claims, and commercial resins had …

Go to article

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir Jan 2010

Characteristics Of Proton Conducting Pva-Chitosan Polymer Blend Electrolytes., Mohd Fakhrul Zamani Abdul Kadir

Student Works (2010-2019)

The main focus of this present work is to build a good conducting solid polymer electrolyte (SPE) based on chitosan and poly(vinyl alcohol)(PVA) blend. Solution cast technique has been employed to produce sample films in this work. From the scanning electron micrographs (SEM) the surface morphology of the blend containing 40 wt.% chitosan and 60 wt.% PVA (C4P6) is homogenous and miscible in one and another. The C4P6 film is the most amorphous and is the best candidate for the polymer host in the electrolyte systems studied in the present work. Ammonium Nitrate (NH4NO3) is the doping salt that provides …

Go to article

The Thermal Characteristic Of Imipenem Encapsulated In Low And High Molecular Weight Of Polyethylene Glycol., Abdul Aziz Ismail Jan 2010

The Thermal Characteristic Of Imipenem Encapsulated In Low And High Molecular Weight Of Polyethylene Glycol., Abdul Aziz Ismail

Student Works (2010-2019)

Microencapsulation technique is widely used in pharmaceutical industries to control the release of a drug. Biodegradable polymer such as Polyethylene glycol (PEG) is frequently used as encapsulation material. This study has tried to produce microencapsulation product of Imipenem antibiotics in Polyethylene Glycol.Commercially available product called Tienam® was used as a major source of Imipenem. We used freeze-drying method to produce the microencapsulation products. The successful of producing of this product is confirmed by the yellowish appearance of the product whereby it shows the colour properties of Tienam® Thermal analysis using Differential Scanning Calorimeter (DSC) was used to characterize pure materials …

Go to article

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani Jan 2010

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadhel A. A. Alsanabani

Student Works (2010-2019)

A slightly branched urethane acrylate macromer (UAM) was synthesized by reacting palm oil-based polyol with excess amounts of polymeric methylene diphenyl diisocyanate (MDI) to form urethane prepolymer, then reacted with 2-hydroxyethyl methacrylate (HEMA) and FT-IR spectroscopy confirmed the urethane and grafted acrylate groups. 0.2% by weight of camphoroquinone (CQ) and 0.8% by weight of ethyl-4-N,N-dimethylamino-benzoate (4EDMAB) by weight were added to render the experimental resins light-curable. Their viscosity, percentage of degree of conversion (%DC) and cross-linking density (CLD), percentage of volumetric polymerization shrinkage (%VPS), water sorption and solubility, flexural strength, modulus of elasticity and toughness were determined and compared to …

Go to article

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa Jan 2010

Electrical And Structural Studies Of Polyacrylonitrile (Pan) Complexed With Inorganic Salts., Khairul Bahiyah Md Isa

Student Works (2010-2019)

In the present study, polymer electrolyte films composed of polyacrylonitrile (PAN) as a host polymer, ethylene carbonate (EC) as the plasticizer and lithium triflate (LiCF3SO3) and sodium triflate (NaCF3SO3) as dopant salts were prepared by the solution cast technique. Five systems of polymer electrolytes films have been prepared; these systems are the plasticized-PAN system i.e. PAN-EC system, two salted-PAN systems i.e. PAN-LiCF3SO3 and PAN-NaCF3SO3, and two plasticized-salted PAN systems i.e. PAN-EC-LiCF3SO3 and PAN-EC-NaCF3SO3. The pure PAN film was prepared as a reference. The ionic conductivity for each system is characterized using impedance spectroscopy. The room temperature conductivity of the pure …

Go to article

Synthesis Of Chromium-Based Ziegler-Natta Catalysts And Thier Application In Ethylene Polymerization And Copolymerization., Wong Jun Xuan Jan 2010

Synthesis Of Chromium-Based Ziegler-Natta Catalysts And Thier Application In Ethylene Polymerization And Copolymerization., Wong Jun Xuan

Student Works (2010-2019)

Four chromium-based oxo-trinuclear carboxylate complexes were prepared by reacting Cr(NO3).9H2O with acetic acid and substituted carboxylic acids to produce [Cr3O(CH3COO)6.3H2O]NO3.7H2O,[Cr3O(ClCH2COO)6.3H2O]NO3.3H2O, [Cr3O(Cl2CHCOO)6.3H2O]NO3.H2O and [Cr3O(Cl3CCOO)6.3H2O]NO3.2H2O, which alysis (TGA).Chromium content in each complex was determined by titrimetry method and the result was in good agreement with that from TGA. Chromium(III)monochloroacetate complex[Cr3O(ClCH2COO)6.3H2O]NO3.3H2O in combination with diethylaluminium chloride formed heterogeneous catalyst system for ethylene polymerization and ethylene-propylene copolymerization. Both Al/Cr ratio and temperature influenced the catalytic activity. The maximum activity of ethylene polymerization was 1768 gPE/gCr/hr/atm, achieved by polymerizing ethylene at 29°C with Al/Cr ratio 30.8. Effect of chloro-substituent groups on carboxylic ligand was studied …

Go to article

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadheel A. A. Alsanabani Jan 2010

Synthesis Of Urethane Acrylate Macromer From Palm Oil-Based Polyol And Its Application As A Resin For Dental Composite., Fadheel A. A. Alsanabani

Student Works (2010-2019)

A slightly branched urethane acrylate macromer (UAM) was synthesized by reacting palm oil-based polyol with excess amounts of polymeric methylene diphenyl diisocyanate (MDI) to form urethane prepolymer, then reacted with 2-hydroxyethyl methacrylate (HEMA) and FT-IR spectroscopy confirmed the urethane and grafted acrylate groups. 0.2% by weight of camphoroquinone (CQ) and 0.8% by weight of ethyl-4-N,N-dimethylamino-benzoate (4EDMAB) by weight were added to render the experimental resins light-curable. Their viscosity, percentage of degree of conversion (%DC) and cross-linking density (CLD), percentage of volumetric polymerization shrinkage (%VPS), water sorption and solubility, flexural strength, modulus of elasticity and toughness were determined and compared to …

Go to article

Analysis Of Plastics In The Tyre Industry Using Fourier Transform Infrared Techniques, Differential Scanning Calorimetry And Softening Point Apparatus, Ching Ching Loh Jan 2002

Analysis Of Plastics In The Tyre Industry Using Fourier Transform Infrared Techniques, Differential Scanning Calorimetry And Softening Point Apparatus, Ching Ching Loh

Student Works (2000-2009)

The plastics in a tyre factory were investigated. The plastics were analysed by FTlR-transmission, FTI.R-ATR, softening point apparatus as well as a Differential Scanning Calorimeter. All the plastics were detected to be polyethene based with melting point range of 107 to 125°C. It was also observed that The FTIR transmission spectrum can be different from the FTIR-ATR spectrum. The FTIR-ATR spectrum gives a higher band intensity at longer wavelengths compared to the FTIR-Transmission spectrum. Interference fringes can be present in the FTlR transmission spectrum. In addition to the above, it was also found that the melting point of plastics obtained …

Go to article