Polymer Chemistry Commons^™

Greening Of Catalytic Processes Using First-Row Transition Metals For Atom Transfer Radical Addition And Transfer Hydrogenation, Gabrielle Pros

Electronic Theses and Dissertations

This work focused on “greening” catalytic processes, atom transfer radical addition (ATRA), which adds an alkyl halide across and alkene, and transfer hydrogenation/dehydrogenation, which reduces a carbonyl without needing direct H₂ gas. Part of “greening” of these processes is through using abundant first row metals, Cu and Ni for catalysis. One aim was to design new ligands which would be more active in these systems; the second was investigation of additives for catalyst regeneration to reduce the catalyst loading necessary for high yields.

The TPMA^* family was investigated in ATRA. Rate constants followed the expected trend, which increased …

Towards Completely Automated Glycan Synthesis, Matteo Panza

Dissertations

Carbohydrates are ubiquitous both in nature as biologically active compounds and in medicine as pharmaceuticals. Although there has been continued interest in the synthesis of carbohydrates, chemical methods require specialized knowledge and hence remain cumbersome. The need for development of rapid, efficient and operationally simple procedures has come to the fore. This dissertation focuses on the development of a fully automated platform that will enable both experts and non-specialists to perform the synthesis of glycans. Existing automated methods for the synthesis of oligosaccharides are highly sophisticated, operationally complex, and require significant user know-how. By contrast, high performance liquid chromatography (HPLC) …

Hierarchical Conjugated Polymer Systems Prepared By Controlled Chain-Growth Polymerization, Chunwa Peter Kei

LSU Doctoral Dissertations

π-Conjugated polymer materials may have a significant economic impact on society by providing means for designing affordable, flexible, and portable organic electronic devices. Their successful commercialization will depend on major scientific advancements, which will challenge human society to seek out ever more detailed and fundamental processes to command. Controlled polymerization affords such a power; allowing for the design of meticulous and precisely defined systems granting detailed insight into structure-property relationships in the polymer materials and bettering understanding of novel physical phenomena.

This dissertation primarily focuses on development and preparation of well-defined hierarchically organized macromolecular systems. The novel chain-growth polymerization methodologies …

Organic Chemistry Ii Lab Manual, Caitlyn Bailey

Senior Honors Theses

This project aims to supply a full lab manual and grading key for Organic Chemistry II, a class often taken by sophomores in Liberty University’s science degree programs. Properly applied laboratory experiments create a beneficial learning environment for science students by using hands-on procedures to transform intangible lecture concepts into concrete demonstrations. Lab work also fosters the development of problem-solving and critical-thinking skills that students need in research and the workplace. Thus, having a comprehensive lab manual is critical to students’ success and understanding in this upper-level class. This project adds to the experiments of Organic Chemistry II lab through …

Photoswitchable Self-Complementary Hydrogen Bond Arrays, Suendues Noori, James A. Wisner

Western Research Forum

Background: Photochromism is the reversible transformation of a chemical material to another form by the absorption of electromagnetic radiation (light), where the two metastable forms have distinct absorption spectra and other properties. Photochromism in materials allows for the switching of their function solely based on irradiation with light. Polymers are used frequently as the building blocks for materials as they are versatile, multifunctional, can carry charge and be processed by solution-based deposition methods. Supramolecular polymers share the same definition as polymers with the exception that they are held together by reversible and directional non-covalent interactions such as hydrogen bonds. Synthesizing …

Bridging The Molecular/Material Divide: An Investigation Into The Properties Of Polyesters, Terra Marie M. Jouaneh

Senior Honors Projects

By definition, polymers consist of large molecules composed of small, repeating units called monomers. These monomers give characteristic material properties to polymers, whether they be the melting point, the folding character, or the inherent stability. Many of the objects we encounter on a daily basis are composed of polymers. These polymers may be synthetic, such as the plastic in disposable bags, or natural, like glycogen in the liver. Recent developments in biotechnology have used synthetic polymers in drug delivery, contact lenses, and even organ transplants. Polyesters, in particular, have been utilized pharmacologically due to their biodegradable properties. Understandably, not all …

Carbohydrate Polymers As Controlled Release Devices For Pesticides, Soma Chakraborty, Maria Cleofe Neri-Badang

Chemistry Faculty Publications

Controlled release technology addresses problems associated with excessive use of toxic agricultural chemicals. This paper reviews the studies on the use of carbohydrate polymers as controlled release matrices for pesticides. Alginates, starch and its derivatives, chitosan, carboxymethylcellulose and ethylcellulose are some of the natural polymers discussed in this review. The advantages and disadvantages of these polymeric systems as well as the factors that affect pesticide release are presented. A discussion on the polymers’ encapsulation efficiency and release profile is also included, which will aid future researchers in identifying the suitable formulation for controlled release of pesticides. Combination of two polymers, …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Modeling The Condensed-Phase Behavior Of Π-Conjugated Polymers, Walker Mask

Theses and Dissertations--Chemistry

It is well established that the morphology and physical properties of an organic semiconducting (OSC) material regulate its electronic properties. However, structure-function relationships remain difficult to describe in polymer-based OSC, which are of particular interest due to their robust mechanical properties. If relationships among the molecular and bulk levels of structure can be found, they can aid in the design of improved materials. To explore and detail important structure-function relationships in polymer-based OSC, this work employs molecular dynamics (MD) simulations to study various π-conjugated polymers in different environments. Two independent investigations are discussed in this work. One investigation examines how …

Stabilized, Hybrid Solid-State Photocatalysts For Water Purification: Preparation, Properties And Performance Under Visible Light Irradiation, Karpagavalli Ramji

Seton Hall University Dissertations and Theses (ETDs)

Stabilized heterogeneous photocatalysts that use only solar light and air have been prepared and successfully employed to decontaminate water from organic pollutants. Organic dye pollutants present, for example in textile effluents, are one of the major sources of water pollution owing to their limited biodegradability, toxicity and potential carcinogenic risks. Before certifying water for public consumption, reuse in industries or for discharge in surface water the organic pollutants must be degraded, an effort that is energy intensive and currently requires complex methodologies. We report solid-state photocatalysts that use only visible light and air to treat wastewater. Perfluoroalkyl perfluoro-substituted zinc phthalocyanine …

Sintering-Induced Nucleation And Growth Of Noble Metal Nanoparticles For Plasmonic Resonance Ceramic Color, Nathan Dinh, Michael C. Leopold, Ryan Coppage

Chemistry Faculty Publications

This study demonstrates the formation of nanoparticles (NPs) from metal salts within ceramic glazes, such that the use of this colorant technology is more accessible to artisans, employs less metal content, is less environmentally harmful, and allows for the use of traditional kilns. Gold NPs have been demonstrated to possess a specific, low material loading use as a ceramic glaze colorant via plasmon resonance. Pre-synthesized gold NPs that are added to ceramic glazes have been found to significantly change in size after firing in both reductive and oxidative atmospheres, but still maintain some size relationships and color properties. Unfortunately, it …

Thienoisatin Oligomers As N-Type Molecular Semiconductors, Natalie M. Kadlubowski, Xuyi Luo, Jianguo Mei

The Summer Undergraduate Research Fellowship (SURF) Symposium

Organic field effect transistors (OFETs) offer many advantages compared to traditional inorganic transistors, such as flexibility and solution processability. In this study we design and synthesize two thienoisatin-based organic semiconducting small molecules, then investigate their electronic properties in n-type OFETs. To introduce n-type charge transport, electron-withdrawing dicarbonitrile moieties were installed on thienoisoindigo and bis-thienoisatin molecules, which led to a quinoidal conjugation on thienoisoindigo, while maintaining an aromatic conjugation on the bis-thienoisatin. Following the syntheses, the molecules were characterized to determine highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) levels via cyclic voltammetry, as well as any potential …

Synthesis And Characterization Of Block Copolymers For Shear Force Responsive Materials And Sugar Conjugated Fluorescent Probes, Jacob Ryan Blankenship

Graduate Theses/Dissertations

Herein, I present my work towards two goals: shear force-responsive materials and sugarconjugated fluorescent probes for bacterial identification applications. The first work is on the development of stimuli-responsive polymers that allow for precise control over the release of encapsulated material. Stimuli-responsive polymers are becoming increasingly important in drug delivery and other applications. However there have been few reports on shear force-responsive micellar systems. I show the synthesis, and characterization by ¹H and ¹³C NMR of four macro-chain transfer agents (macro-CTAs), one of which has not been previously reported. The resulting macro-CTAs were used in polymerization of vinyl acetate …

Thermosetting Polymers Via Azide Alkyne Cycloaddition, Richard H. Cooke Iii

Dissertations

This dissertation exploits properties inherent to azide-alkyne cycloaddition and applies practical solutions to difficult problems. Chapter II addresses structure-property relationships in glassy azido-alkyne matrices by varying the identity of the central linkage within tetrapropargyl bis-aniline-type crosslinkers, and by the addition or omission of Cu(I) catalyst. This systematic study showed that an ether or methylene linkage yielded lower melting tetrapropargyl crosslinkers that were soluble in, and produced homogeneous, networks when cured with, a standard azido resin, di(3-azido-2-hydroxypropyl) ether of bisphenol-A; in contrast, a sulfone linkage yielded a relatively insoluble crosslinker and poorly dispersed, heterogeneous networks when reacted with the same …

Synthesis Of A Bipyridine Ligand For Metal-Triggered Supramolecular Polymers, Andrew D. Gould

DePaul Discoveries

Intermolecular forces, such as H-bonding, ionic interactions and metal chelation between small molecules, can lead to the assembly of higher-order supramolecular nanostructures. A metal chelator, 2-(Pyridin-2-yl) pyridine-5-carboxylic Acid (a bipyridine derivative), is expected to aid in the formation of supramolecular structures as part of amphiphilic molecules that self-assemble in solution in the presence of metal ions. The bipyridine ligand currently under synthesis can be prepared through a five-step synthesis scheme. The second reaction of this synthesis (the coupling of two pyridine rings) resulted in a combination of the desired 1,2,5-isomer, as well as an unforeseen 1,2,3-isomer. Future research will therefore …

A Detailed Study Of Novel High-Performance Bromine And Phosphorus Based Reactive Flame Retardants In High-Quality Bio-Polyol Based Rigid Polyurethane Foams, Sanket Bhoyate

Electronic Theses & Dissertations

Structural fire is one of the most catastrophic issues related to human safety observed from reports of National Fire Protection Association of United States in past years. Polyurethanes are one of the important structural material used as thermal insulation in housing. They are also used in automotive, construction, medical, packaging, furniture, thermal, electrical, and vibration insulation. Considering this, we have synthesized bio-based polyurethane foams using limonene-based polyol, isocyanates, and other compounds. Flame retardancy was imparted using reactive flame retardant polyols. Firstly, flame retardancy test was performed on the foams using two novel aliphatic and two novel aromatic bromine-based synthesized reactive …

Flame Retardancy Of Ferrocene Incorporated Epoxide, Sultan Alanazi

Electronic Theses & Dissertations

Epoxy resins are thermosetting resins that are used in a variety of applications such as electrical and electronic devices. However, epoxy resins can be inherently flammable. To circumvent this problem, epoxy resins were prepared by incorporating ferrocene carboxylic acid into the epoxy prior to thermal setting, as a flame retardant. Ferrocene carboxylic acid was prepared by condensing o-chlorobenzoyl chloride with ferrocene followed by hydrolysis. The synthesized ferrocene carboxylic acid was characterized by ¹H-NMR spectroscopy, ¹³C-NMR spectroscopy, and FT-IR spectroscopy. Epoxy films were then prepared by reacting ferrocene carboxylic acid (10, 15, and 20% by wt) with bisphenol A …

Highly Flame Retardant And Bio-Based Rigid Polyurethane Foams Derived From Orange Peel Oil, Chunyang Zhang

Electronic Theses & Dissertations

Polyurethane is an important class of polymer which is being used for various industrial applications in the form of rigid foams, flexible foams, thermoplastic, elastomer, coating, and adhesive. Especially there is a huge market for rigid polyurethane foams for their applications as thermal insulating material in building and housing. In general, polyurethanes are prepared using polyols and diisocyanates. Most of the polyols used by industries are petrochemical based. In this project, a novel polyol from an orange peel oil-based derivative, limonene dimercaptan, was synthesized using one step photochemical thiol-ene reaction. The synthesized polyol was used to prepare flame retardant polyurethane …

Investigations Into Ring-Opening Polymerization Of Functionalized Ε-Caprolactones, Danielle N. Coderre, Matthew K. Kiesewetter

Senior Honors Projects

Polymers are defined as large molecules constructed from small, repeating units (monomers) which make up everyday items, such as: plastic bags and bottles, waterproof coatings, pipes, etc. H-bonding urea (U) or thiourea (TU) catalysts paired with base cocatalysts used for organocatalytic ring-opening polymerization (ROP) of cyclic esters have been shown to exhibit fast rates of polymerization and result in polymers with controlled molecular weights (Mn) and low polydispersity indexes (PDI). Additionally, organocatalytic ring-opening polymerization (ROP) techniques have been shown to be tolerant of the incorporation of functional groups into the monomer feed, which is vital for the catalytic synthesis of …

Higher Energy Gap Control Of Fluorescence In Conjugated Polymers, Chien-Hung Chiang

LSU Doctoral Dissertations

Chemo- and biosensors based on fluorescent conjugated polymer benefit from greater detection sensitivity due to amplification of the electronic perturbations produced by analyte binding. This amplification stems from the exciton-transporting properties of conjugated polymers. A conventional design paradigm relies on the analyte binding events which generate sites of lower energy relative to the polymer energy: either fluorescence quenching sites (turn-off sensors) or bathochromically shifted fluorophores (turn-on sensors). In both type sensors, the excitons migrate to the lower-energy site created by analyte binding.

This dissertation primarily focused the investigation of an alternative paradigm when analyte binding creates higher energy gap sites …

Synthesis And Characterization Of Covalent Adaptable Networks Comprised Of Dynamic Imine And Aminal Covalent Bonds, Albert Chao

LSU Doctoral Dissertations

The dissertation is about the design, synthesis and characterization of materials comprised of covalent adaptable networks (CANs). There are three chapters within this dissertation.

Chapter 1 contains a short overview of conventional thermosets and thermoplastics. A new strategy of combining advantages from thermosets and thermoplastics is utilizing dynamic covalent chemistry (DCC) for material design. Dynamic covalent bonds are able to undergo dynamic exchange which allow the material to adapt to a new state when under stimuli such as stress or strain. Material comprised of such reversible networks is called covalent adaptable networks (CANs). These types of reversible covalent bonds followed …

Synthesis And Catalytic Testing Of A Proline Functionalized Amphiphilic Block Copolymer, Eric Firestone

Master's Theses and Doctoral Dissertations

Catalysts are reagents used to reduce the amount of energy that a reaction needs to execute, allowing it to proceed at a higher rate while not being consumed. The use of catalyst functionalized amphiphilic copolymer allows easier recovery of the catalyst at the end of the synthesis and allows for the reaction. In water, under appropriate conditions, the amphiphilic block copolymers will form micelles and allow the reaction to occur on the interior of the micelle. The synthesis of amphiphilic copolymer with a hydrophobic O-methacryloyl-trans-4- hydroxy-L-proline and methyl methacrylate end and a hydrophilic acrylic acid end was characterized. The polymer …

Direct Measurement Of Rupture Force Of Single Triazole Molecule By Atomic Force Microscope And Solid Phase Synthesis Of Monodisperse Polyethylene Glycols, Ashok Khanal

Dissertations, Master's Theses and Master's Reports

This dissertation includes two topics, which are related to each other: (1) Rupture force measurement of single triazole molecule by atomic force microscope (AFM) and (2) Solid phase stepwise synthesis of polyethylene glycols (PEGs).

The reaction of an alkyne and an azide to form a 1,2,3- triazole has found wide applications. However, the stability of triazole under mechanical stress is unclear. We investigated the cycloreversion at the single molecular level using atomic force microscopy. A mica surface functionalized with a molecule containing a 1,2,3-triazole moiety in the middle and an activated ester at the end was prepared. An AFM tip …

Study Of The Effect Of Steric Bulk Of Side Chains On The Properties Of Conjugated Polymers, Bei Zhang

Theses and Dissertations--Chemistry

Donor-acceptor conjugated polymers opened a new era for conjugated polymer research due to the abundant selection and combination of different conjugated units. This class of polymers function as semiconductor materials with potential application in plastic consumer electronics. The frontier molecular orbital energies of the polymers are generally determined by the selection of donor and acceptor units in the backbone structure, and their substituents. The side chains attached to the backbone not only affect the solubility of the materials, but also their self-assembly and morphological characteristics, which indirectly govern optoelectronic properties. It is important therefore to consider backbone architectures and the …

Advancing Structure-Property Relationships In Functional Materials Via Thiol-Ene Photopolymerization, Brian Richard Donovan

Dissertations

Thiol-ene photopolymerizations provide a robust and versatile synthetic pathway to functional materials, and owing to the radical step-growth nature of polymerization and the resulting homogenous network structure, provide non-convoluted insight into how network chemistry influences and dictates macromolecular properties.

The first facet of this dissertation focuses on the design and synthesis of bio-inspired, thin film adhesives for dry and aqueous adhesion. Drawing inspiration from the intertidal marine mussel, Chapter II details the synthesis of adhesive networks containing a monofunctional catechol-based monomer. The inclusion of a catechol group resulted in significant improvements in adhesion on a variety of substrates. In Chapter …

Rate Acceleration Of Organocatalytic Ring-Opening Polymerization Rough The Application Of Bis- And Tris- ( Io)Urea H- Bond Donors, Samuel S. Spink

Senior Honors Projects

Well-defined and functionalized polymers have a wide variety of applications in biomedical studies. Advancements in the fields of drug delivery, microelectronics, and medical imaging, among other applications, are predicated upon the development of methods for the synthesis of precision polymers. Organocatalytic ring-opening polymerization (ROP) of cyclic monomers is an effective route to the production of polymeric materials, namely polyesters and polycarbonates, whose biodegradable properties make them a viable option in biomedical research. Arguably, H-bond mediated catalysts are among the most selective catalysts for ROP, giving rise to highly functionalized polycarbonates, well-controlled polymerizations, and other custom tailored applications. With respect to …

Enediyne Derived Conjugated Polymers, Keda Hu

Chemistry and Chemical Biology ETDs

The advance of conjugated polymers (CPs) is largely relied on the development of new polymerization methods, the discovery of novel polymers that possess unique chemical and physical properties, and understanding of their structure-property relationship. We have employed a set of trans-enediynes (trans-EDYs) for the preparation of four series of CPs, polydiacetylenes (PDAs), platinum-segmented PDAs, polytriacetylenes (PTAs) and boron doped polyacetylenes (BPAs). The resulting polymers displayed interesting optical and electrochemical properties which could be fine-tuned by the attachment of various side chains on the EDY moieties. We have applied acyclic EDY metathesis for the synthesis of PDAs, a class of CPs …

Synthesis Of Multifunctional Polyacrylates And A Binding Group To Hemoglobin For The Treatment Of Traumatic Brain Injuries, Marina Michaud

Honors College Theses

Hemoglobin based oxygen carriers (HBOCs) hold promise as an effective emergency treatment of severe traumatic brain injuries (TBI). In the latest generation of HBOCs, polynitroxyl-pegylated hemoglobin (PNPH), cell-free hemoglobin is modified with TEMPO and PEG which reduce the toxicities associated with earlier generations of HBOCs. In our efforts to optimize the economic and therapeutic impacts of PNPH’s we have synthesized polydimethylaminoethyl methacrylate (poly-DMAEMA) under controlled living conditions via reverse addition-fragmentation chain transfer (RAFT) polymerization. The poly-DMAEMA was then successfully functionalized via quaternization of its NMe₂ groups using chloroacetate derivatives of the TEMPO and PEG. This process was quantitative and …

Micro-Spectroscopy Of Bio-Assemblies At The Single Cell Level, Jeslin Kera

Honors Undergraduate Theses

In this thesis, we investigate biological molecules on a micron scale in the ultraviolet spectral region through the non-destructive confocal absorption microscopy. The setup involves a combination of confocal microscope with a UV light excitation beam to measure the optical absorption spectra with spatial resolution of 1.4 μm in the lateral and 3.6 μm in the axial direction. Confocal absorption microscopy has the benefits of requiring no labels and only low light intensity for excitation while providing a strong signal from the contrast generated by the attenuation of propagating light due to absorption. This enables spatially resolved measurements of single …