Polymer Chemistry Commons^™

Evaluation Of Promising Eco-Friendly Flame Retardants For Bio-Based Rigid Polyurethane Foams Based On Modified Castor Oil, Prasadi Abeysinghe Arachchilage

Electronic Theses & Dissertations

Fossil fuel derivatives in the polyurethane industry are gradually being replaced with environmentally friendly alternative bio-based resources. Vegetable-oil-based polyols are emerging bio-based resources that can decrease cost competitiveness in polyurethane markets, reduce environmental impacts, and meet the urgent need for green and sustainable development strategies. Among this, interest is the use of castor oil to make polyurethane because of its inedibility and the fact that it contains many functionalizable chemical groups. However, the poor thermal stability and low load-bearing capacity of castor-oil-based rigid polyurethane foam limits its application. Two methods were used to address these limitations: (i) more hydroxyl groups …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Synthesis And Properties Of Bio-Based 3d Printable Resins, Cameron Woods, Seth Taylor, Jeremiah Coughlon, Turner Perdue, Sourav Chatterjee, Jason E. Bara

Scholars Week

A photopolymer resin is a monomer that, when introduced to light of a certain wavelength, starts to polymerize into a solid. This has become a growing part of the 3D printing industry. There have been many advancements in the field of 3D printing, however, a lot of these resins are not environmentally friendly and even harmful if not handled in the correct manner. Plant based resins are becoming more and more popular because of their biodegradability and for the possibility of using renewable resources. Glycerol is a plant-based compound that is produced in excess in industry. Glycerol obtained from bioethanol …

Physiochemical Properties Of Urethane-Containing Ionic Liquids And Ionenes From A Non-Isocyanate Synthetic Approach, George Timmermann

Scholars Week

Ionic polymers that are designed to contain ionic liquids (ILs) in their backbones have been shown to exhibit a high degree of variability through changing the type of ionic character and the location of the ionic region within the molecule. This large amount of variability in both the structure and characteristics of ILs allows researchers to design task-specific ionic polymers and ILs for a variety of applications including gas separation membranes and solid polymer electrolytes. The synthesis of a specific class of ILs and ionenes through the incorporation of urethane groups with imidazolium rings by reacting carbonyl diimidazole with various …

Microscale Chemical Manipulation And Imaging Using Photoactive Molecules And Light, Uroob Haris

Chemistry Theses and Dissertations

Chemical manipulation with light has been an active and growing area of research with important implications in materials science, biotechnology, and environmental science. From early investigations of light sensitive materials for photography in the 19^th century, to printing billions of transistors on a semiconductor chip in present day, scientists have gained a deep understanding of photochemistry and the processes that allow us to harness light for everyday applications. In this work, we explore microscale fabrication and molecular imaging using light and photoactive molecules as foundational tools. We develop a visible-light mediated technique for high resolution microscale chemical lithography comprising …

Hydrothermal Liquefaction Of Saccharina Latissima For The Production Of Biofuel, Mayokun A. Oke

Mechanical Engineering Theses

We performed hydrothermal liquefaction of brown macroalga (Saccharina latissima) in the presence of homogenous and heterogenous catalysts such as KOH, Na₂CO₃, Pd/C, HZSM-5, Ce/HZSM-5, and Ni/SiO₂-Al₂O₃ in hot compressed water, to investigate their effects on product yield and composition in the biocrude. To investigate hydrocarbon production, we used methanol as co-solvent (methanol-to-water 1/4 vol.%) and as the only liquefaction solvent. We carried out the experiments in a batch reactor at 330^oC and 120-130 bar, and varying temperature, algae-to-water ratio, residence time, and pretreatment method. The biocrude yields …

Pyrrolopyrrole-Based Materials For High-Contrast Electrochromics, Allison Marie Hawks

Master of Science in Chemical Sciences Theses

Understanding structure-property relationships of underutilized p-conjugated chromophores is an important task for the continued discovery of materials that will find utility in organic electronic applications. Dihydropyrrolo[3,2-b]pyrroles (DHPPs) are synthetically simple and highly tailorable chromophores that can be decorated with diverse functionalities that readily manipulate optoelectronic properties useful for a variety of applications. However, a thorough understanding of how these functionalities influence properties of DHPPs that will be useful in applications such as electrochromism is unknown. Motivated to exploit the synthetic simplicity and tailorability of DHPPs, a family of DHPP chromophores was synthesized to probe how functionality and connectivity …

Design And Fabrication Of Single-Chain Nanoparticles, Vitrimers, Bottlebrush And Comb Polymers, Logan Dugas

Dissertations

The introduction of novel dynamic exchange chemistries into polymer chains and networks has shown great potential of giving next generation polymeric materials. Within the scope of this thesis, dynamic chemistry is employed to realize single-chain nanoparticles, vitrimer networks, bottlebrush and comb polymers. CHAPTER I provides a broad introduction to the topics at hand, focusing upon the techniques utilized to achieve such materials with relevant literature and understanding of the techniques and architectures explored. CHAPTER II focuses upon the synthesis of single-chain nanoparticles via a copolymerization of polyisobutylene macromonomers with norbornene monomers equipped with pendant anthracene moieties. Through this work, the …

The Synthesis, Characterization, And Utilization Of Functionally Diverse Romp-Based Bottlebrushes, Cheyenne Liu

Dissertations

Bottlebrush polymers have garnered interest in many disciplines for their unique structure-property characteristics and potential applications. These polymers typically exhibit extended rodlike conformations as a result of sterically crowded side-chains. Further, extensive work has focused on expanding the synthetic toolbox for these systems, resulting in excellent molecular weight control, diverse functional group utility and corresponding stimuli-responsive behaviors. This dissertation examines both synthetic and stimuli-responsive tools in the context of bottlebrush systems.

A broad overview of bottlebrush characteristics, synthesis, and applications is discussed in CHAPTER I. CHAPTER II focuses on the use of a chain-transfer agent in the ring-opening metathesis polymerization …

Magnetic Interactions In Open-Shell Conjugated Polymers, Michael Steelman

Dissertations

Most materials are closed shell in which every electron participates in a bond, resulting in unremarkable magnetometry signatures and functionalities. While rare, modern technologies rely on magnetic materials in which unpaired electrons are localized to inorganic atomic centers. In recent decades, a collection of organic open-shell π-conjugated molecules have shown magnetic ordering, albeit at exceedingly low temperatures; a result of weak noncovalent intermolecular interactions limiting long range electronic exchange. Thus, practically applicable sp orbital magnetism that persists at or above room temperature remains a grand challenge for chemistry and physics. Despite the wide variety of chemical structures afforded by organic …

Dual Ionic Liquid-Functionalized Cellulosic Materials: Thermal, Mechanical And Conductive Properties, Elizabeth Mcgrew, Kevin M. Miller Phd

Posters-at-the-Capitol

Cellulose, an inexpensive and renewable biomacromolecule, represents an intriguing synthetic foundation for new materials with task-specific properties. Here, we wish to report a synthetic route for functionalizing cellulose with a side chain containing two ionic liquid functional groups using azide-alkyne ‘click’ cyclization strategy, followed by quaternization of the two resulting heterocycles (1,2,3-triazole and imidazole). Through this functionalization strategy, the resulting cellulosic materials exhibited significant softening, with several glass transition (T_g) values observed below room temperature, indicating the amorphous nature of the materials, with the T_g dependent on both the length of the side chain and the …

Paek- And Pes-Like Perarylated Phosphonium Ionenes: Synthesis, Thermal Properties, And Conductivity, Samantha Sims

Murray State Theses and Dissertations

Ionic liquids (ILs) are useful for many applications due to the tunability of their characteristic properties making these salts ideal for many applications. To further increase possible areas of application for these materials, some ILs can be incorporated into polymer structures to form poly ionic liquids (PILs) or ionenes. The specific ions used within the material will determine the thermal, mechanical, and chemical stability properties exhibited by the polymer. Adjustments can be made to the ion structures during the synthetic process to influence these observed properties.

Fuel cells, batteries, solar cells, and capacitors, all require materials that can withstand high …

Synthesis And Application Of Redox-Active Covalent Organic Frameworks In Rechargeable Batteries, Mohammad K. Shehab

Theses and Dissertations

Synthesis and Application of Redox-Active Covalent Organic Frameworks in Rechargeable Batteries

Mohammad K. Shehab

Department of Chemistry, Virginia Commonwealth University, Richmond, Virginia 23284, United States

Abstract

In recent years, lithium-ion batteries (LIBs) have been considered the dominant energy storage devices for portable electronics and electric vehicles due to their high energy density, low self-discharge rate, and long cycle life. In LIBs, the traditional positive electrodes employed are mainly derived from metal-containing inorganic compounds composed of cobalt, iron, nickel, or manganese (LiCoO₂, LiMn₂O₄, and LiFePO₄) coupled with graphite as the negative electrode. Despite …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

Application Of Mass Spectrometry For The Characterization Of Synthetic Oligomers And Natural Lignin, Poorya Kamali

Theses and Dissertations--Chemistry

As part of the ongoing effort to substitute finite fuel and chemical resources with renewable ones, biomass is emerging as one of the most promising sources. Biomass consists of three main components of cellulose, hemicellulose, and lignin. Traditionally, cellulose has been used extensively in pulping industry, while lignin has been considered waste and is burned to generate heat. Lignin, a complex aromatic polymer component of biomass, has the potential to be used as a source of aromatic chemicals and pharmaceutical synthons. The recalcitrant nature of lignin, the lack of effective lignin breakdown methods and analytical techniques to analyze it are …

Investigation Of Additives And Ingredients Of Bio-Resin For Visible Wavelength Laser-Induced Polymerization, Patrick Riggs

College of Graduate Studies: Theses & Dissertations

Optical 3D printing is a branch of Additive manufacturing (AM) that utilizes low-waste production leading to efficient and rapid prototyping. Currently, this method of AM is associated with mainly petroleum-based resins. Bio-resin polymerization is an emerging research area for finding replacements for petroleum-based resins, but curing the resin with laser energy is not normally a practical use case. Current optical 3D printing uses lasers to cure liquid resins to form solid 3D objects in a layer-by-layer process which is time consuming, defect prone, and a leading limiting factor for high volume production; so, finding a way to incorporate bio-resin into …

Converting Hydrazone-Based Photoswitches Into Functional Materials, Sirun Yang

Dartmouth College Ph.D Dissertations

The development of new classes of molecular switches with enhanced performance and brand-new functionalities enables practitioners to push the frontiers of adaptive materials. In the realm of photoswitches, the bistability of hydrazones (i.e., molecules that incorporate the C=N-NH functional group) allows for the kinetic trapping of polymer and supramolecular assemblies resulting in multistate actuation and emergent phenomena that are not tractable with other photoswitches. This property has transformed hydrazone photoswitches into powerful tools that can be used in understanding fundamental molecular interactions and how to apply them in modulating the physicochemical properties of materials.

Progressing from disordered to …

Polyaniline-Derivatives Based On Poly (Heterocyclic Diphenylamine) With Improved Electrochemical Stability And Processability, Mohammed Noifa Almtiri

Theses and Dissertations

Today, smart innovation has become an essential part of human life; thus, contemporary technologies are always looking for intelligent, responsive, and efficient materials to satisfy these demands. Consequently, synthetic "metals" or, more precisely, intrinsically conducting polymers (CPs) have begun to find a place as valuable and practical materials for a new generation of devices. Amongst all intrinsic conducting polymers, polyaniline (PANI) has attracted significant attention due to its outstanding air and moisture stability, simple preparation technique, and high electrical conductivity (chapter I).

Chapter II represents the synthesis of a new PANI derivative that contains a phenoxazine unit co-polymerized with p-phenylenediamine …

Designing Dynamic And Degradable Polymeric Materials With Thiol-X Chemistries, Reese Sloan

Dissertations

With plastic production poised to increase in coming years, there arises a need to develop new polymeric materials designed to combat the global pollution crisis. A commonly utilized approach in addressing this challenge is to employ a responsive functional moiety into the polymer architecture. Thiol-X reactions, a commonly utilized class of “click” reactions, have garnered broad implementation in new stimuli-responsive materials. This work specifically focuses on utilizing radical-mediated thiol-ene coupling and base-catalyzed thiol-isocyanate reactions to develop a library of ternary thiol-ene/thiourethane covalent adaptable networks (CANs) and hydrolytically labile poly(thioether ketal) thermoplastics. CANs are a class of network materials capable of …

Studies In The Use Of 1,1'-Di(1-Hydroxyethyl)Ferrocene As A Flame Retardant For Polyurethanes, Chanel Yeary

Electronic Theses & Dissertations

Significant research in non-toxic flame retardants (FR) has been performed in recent years since the dangerous consequences of halogenated FR were found. As early as the 1970’s, carcinogenic the side effects of halogenated compounds were being acknowledged. Since the early 2000’s halogenated FRs began being phased out of use due to these negative side effects. Since then, significant research has been exploring alternative effective flame retardants. Ferrocene (Fc) is a promising alternative to halogenated FRs due to its nontoxicity and FR properties. This research will report on the synthesis of 1,1’-di(1-hydoxyethyl) ferrocene (DHEFc) and its incorporation into a polyurethane. A …

Synthesis Of Conjugated Polymers From Xanthene And Alkenyl Flanked Diketopyrrolopyrrole Monomers For High-Performance Electronic Applications., Ranganath Wijesinghe Wahalathantrige Don

Theses and Dissertations

In traditional electronics, inorganic materials such as silicon and germanium are used as semiconductors due to their outstanding semiconducting properties. Unfortunately, inorganic materials are rigid due to their high crystalline nature, and processing these materials is complex and expensive. Furthermore, traditional semiconducting materials do not have favorable mechanical properties in applications such as wearable devices and large-area applications with complicated shapes. Conjugated conducting polymers (CCPs) are being explored as alternative materials to conventional semiconductors due to their mechanical properties and high conductivity. CCPs offer properties such as solution and low-temperature processability, flexibility, thermal and optical properties that traditional semiconductors could …

A Modular Synthesis Of Processable And Thermally Stable Semi-Fluorinated Aryl Ether Polymers Via Step-Growth Polymerization Of Fluoroalkenes, Ketki Eknath Shelar

Theses and Dissertations

Tailored fluoropolymers remain the leading choice for a wide variety of advanced high-performance applications, including electronic/optical and energy conversion, owing to their unique blend of complementary high-performance properties. Amorphous semi-fluorinated polymers exhibit improved solubility and melt processability when compared to traditional perfluoropolymers. A leading class of semi-fluorinated aryl ether polymers includes perfluorocyclobutyl (PFCB), perfluorocycloalkenyl (PFCA), and fluoroarylene vinylene ether (FAVE) polymers. Monomers containing aromatic trifluorovinyl ethers (TFVE) are used to synthesize PFCB polymers via radical-mediated [2+2] cyclodimerization. On the other hand, FAVE and PFCA polymers are polymerized via base-mediated nucleophilic addition/elimination of bisphenols with TFVE monomers and decafluorocyclohexene respectively. The …

Synthesis And Characterization Of Sustainable And Biobased Copolymers From Lignocellulosic, Guery Saenz

Theses and Dissertations

Natural compounds have been the primary resource used to produce polymeric materials by humankind since the mid-1900s. Yet, progress in bio-based polymers from renewable feedstock has encountered some obstacles, mainly due to the low prices of petroleum-based monomers, compared to natural and sustainable materials. However, most commodity plastics are non-degradable materials, and solid plastic waste accumulation adversely affects the environment. As the world population is growing and demanding chemicals, energy, and plastics materials, polymer research is focusing on synthesizing bio-based and degradable polymers. Thus, biomass, a sustainable and inexpensive feedstock, is highly appropriate for designing alternative thermoplastics that are degradable …

Nitro-Aromatic Polymers For Conversion-Style Battery Cathodic Materials, Brady P. Samuelson

Honors Thesis

The development of organic electrode materials in rechargeable batteries has seen a resurgence in recent decades. This spike in interest is mostly due to the increased investments in renewable energy sources, grid-scale energy storage, and the rapid transition to electric vehicles. Current lithium battery cathode materials typically use some form of lithium metal oxide (specific capacity: 272 mAh g^-1 which has problems with limited capacity, thermal runaway, and an unreliable supply chain. Our research group’s solution involves investigating new lightweight, organic redox groups combined with a conductive polymer backbone to serve as a possible replacement for the cathode in …

Analysis Of The Light Responsive Azobenzene Peptide Nucleic Acid Duplexes, Kat Nguyen

Honors College Theses

Peptide nucleic acids (PNAs) are oligonucleotide analogues in which the sugar-phosphate backbone has been replaced by a pseudopeptide skeleton. Since PNAs use the natural nucleobases (Adenine, Thymine, Cytosine, Uracil, and Guanine) found in either DNA and/or RNA, they are able to hybridize according to Watson-Crick base-pairing to form duplexes. PNA is a promising therapeutic agent because they can function as antigene or antisense chemical agents. To further enhance their utility, we aim to incorporate a photoswitchable moiety using azobenzene. Here, we report the results of the synthesis and purification of a photoswitchable 11 mer PNA along with initial characterization efforts.

Valorization Of Biopolymers And Biomass To Produce Materials For A More Circular Economy, Moira Lauer

All Dissertations

With a globally increasing population and largely unchecked consumption of raw materials, human society is on track for devastating consequences. Two industries responsible for utilizing massive amounts of raw materials and generating equally gargantuan quantities of waste are the packaging and infrastructure sectors. In 2017 in Europe, for example, packaging reached a record 173 kg of packaging waste per capita. One of the largest packaging consumers is the food industry, in which 40% of packaging is made of petroleum-derived single-use plastic, leading to a massive carbon imbalance. “The Built Environment,” on the other hand, is responsible for about 50% of …

Synthesis And Study Of Unsymmetrical Bidentate Bis(Phosphino)Pyrrole Ligands And Their Transition Metal Complexes, Julia F. Vidlak

Honors Theses

Our laboratory has reported the synthesis and characterization of a broad library of unsymmetrical bidentate bis(phosphino)pyrrole (BPP) ancillary ligands for use in nickel-catalyzed cross-coupling reactions. The electronic and steric properties of nickel complexes bearing these ligands are examined, and our data support the hypothesis that these ligands produce nickel complexes with electron-deficient metal centers. The syntheses of (BPP)Ni(o-tolyl)Cl precatalysts for utilization in nickel-catalyzed Buchwald-Hartwig Amination are described, and preliminary reactivity studies reveal that (BPP)Ni(o-tolyl)Cl precatalysts are effective in promoting C–N cross-coupling reactions. Finally, we report steric measurements and electronic properties obtained from computed (BPP)NiCl2 and (BPP)Ni(CO)2 complexes, respectively. Additional reactivity …

Simplified Synthesis Of Conjugated Polymers Enabled Via 1,4-Dihydropyrrolo[3,2-B]Pyrrole, Kenneth-John Jack Bell

Master of Science in Chemical Sciences Theses

Conjugated polymers have attracted significant attention as the active layer material in organic electronics, such as organic photovoltaics and light-emitting diodes, partly due to the ability to influence a broad range of properties through structural design motifs. However, high performance conjugated polymers suffer from numerous synthetic steps, generation of toxic waste, and harsh reaction conditions all of which impart additional costs that inhibit their widespread utilization. Therefore, an emphasis on reducing synthetic complexity and utilizing abundant, commercially available starting materials is needed for organic electronics to reach their full potential. Dihydropyrrolo[3,2-b]pyrrole (H₂DPP) chromophores offer a simple one-pot synthesis …

Towards Semiconductor Nanorods With Nickel/Iron Cocatalyst., Kehinde Ayorinde

Masters Theses & Specialist Projects

The adverse effects associated with the utilization of fossil fuels has led to the need to provide an alternative cleaner energy. Photocatalytic hydrogen evolution reaction via water splitting provides a renewable pathway to generating energy. Our photocatalyst system includes a semiconductor component (CdSe/CdS core/shell nanorods) to capture light and an attached metal (cocatalyst) for the hydrogen evolution reaction. Platinum is an effective metal catalyst for this reaction due to strong proton binding energy that easily facilitates the reduction of water to produce hydrogen gas. However, due to the high cost of platinum, there is a need to find a less …

4,6-O-Phenylethylidene Acetal Protected D-Glucosamine Carbamate-Based Gelators And Their Applications For Multi-Component Gels, Pooja Sharma, Guijun Wang

Chemistry & Biochemistry Faculty Publications

The self-assembly of carbohydrate-based low molecular weight gelators has led to useful advanced soft materials. The interactions of the gelators with various cations and anions are important in creating novel molecular architectures and expanding the scope of the small molecular gelators. In this study, a series of thirteen new C-2 carbamates of the 4,6-O-phenylethylidene acetalprotected D-glucosamine derivatives has been synthesized and characterized. These compounds are rationally designed from a common sugar template. All carbamates synthesized were found to be efficient gelators and three compounds are also hydrogelators. The resulting gels were characterized using optical microscopy, atomic force microscopy, …