Polymer Chemistry Commons^™

The Effect Of Heat Treatment And Chemical Treatment On Natural Fibre To The Durability Of Wood Plastic Composites – A Review, Nuratiqah Asyiqin Mohd Nasharudin, Nur Fatihah Sulaiman, Nurul Aziemah Mohammad, Wan Nor Raihan Wan Jaafar, Falah Abu Dr., Siti Norasmah Surip

Journal of Materials Exploration and Findings

The application of WPC is not only limited to indoor applications but has been extended to exterior applications where properties of WPC could compromise during service life. WPC was derived from wood fiber of various sizes to reinforce polymers. Wood fiber has the advantage of a cheaper price, being abundantly available, and ease of processing, however, the critical factor is its hydrophilic nature, where moisture absorption is likely to occur. Thus, treatments for reducing the hydrophilicity of wood fibers are applied. By treatment of wood fiber, the surface impurities were removed, leaving the roughened surface of fibers, thus providing a …

Engineered Plga Nanofibers For Drug Delivery, Andrew Mancuso

Dissertations, Theses, and Capstone Projects

Poly-lactic-co-glycolic acid (PLGA) polymers are rapidly gaining momentum as a platform for next-generation drug delivery systems due to their ease and low cost of synthesis, favorable biocompatibility and biodegradability, and lack of toxicity. In particular, the application of drug-loaded PLGA nanofibers directly to a target tissue may represent a promising alternative to traditional routes of drug administration (e.g., oral, injectable) as they offer the potential to greatly improve bioavailability, increase efficacy, and reduce off-target toxicity. Furthermore, the use of such a system may potentially allow for greater flexibility in clinical drug development, by enabling the use of compounds which have …

Potential Of Biduri Fiber (Calotropis Gigantea) As Material For Oil Spill Absorbent, Anne Sukmawati, Wulan Septiani

Journal of Materials Exploration and Findings

Biduri fiber (Calotropis gigantea) is a natural hollow fiber with hydrophobic and oleophilic properties potentially used as oil spilled sorbent from seawater. This study aims to determine the absorption capacity and efficiency of the Biduri fiber and membrane to fuel oil. Measurement of oil absorption to seawater was carried out at various fiber weights (0.5-1.5 g), fiber composition (50-95%), contact time (10-90 minutes), temperature (30 and 50°C), and compared with commercial products. The results showed that the fiber weight variation of 0.5-1.5 g has an average absorption efficiency of 96.67%, and the highest absorption was obtained in a weight of …

Application Of Mass Spectrometry For The Characterization Of Synthetic Oligomers And Natural Lignin, Poorya Kamali

Theses and Dissertations--Chemistry

As part of the ongoing effort to substitute finite fuel and chemical resources with renewable ones, biomass is emerging as one of the most promising sources. Biomass consists of three main components of cellulose, hemicellulose, and lignin. Traditionally, cellulose has been used extensively in pulping industry, while lignin has been considered waste and is burned to generate heat. Lignin, a complex aromatic polymer component of biomass, has the potential to be used as a source of aromatic chemicals and pharmaceutical synthons. The recalcitrant nature of lignin, the lack of effective lignin breakdown methods and analytical techniques to analyze it are …

4,6-O-Phenylethylidene Acetal Protected D-Glucosamine Carbamate-Based Gelators And Their Applications For Multi-Component Gels, Pooja Sharma, Guijun Wang

Chemistry & Biochemistry Faculty Publications

The self-assembly of carbohydrate-based low molecular weight gelators has led to useful advanced soft materials. The interactions of the gelators with various cations and anions are important in creating novel molecular architectures and expanding the scope of the small molecular gelators. In this study, a series of thirteen new C-2 carbamates of the 4,6-O-phenylethylidene acetalprotected D-glucosamine derivatives has been synthesized and characterized. These compounds are rationally designed from a common sugar template. All carbamates synthesized were found to be efficient gelators and three compounds are also hydrogelators. The resulting gels were characterized using optical microscopy, atomic force microscopy, …

A Highly Conductive, Flexible, And 3d-Printable Carbon Nanotube-Elastomer Ink For Additive Bio-Manufacturing, Andy Shar, Phillip Glass, Daeha Joung Ph.D.

UROP Posters

The synthesis of a highly conductive, flexible, 3D-printable, and biocompatible ink has been of great interest in the field of bio-based additive manufacturing. Various applications include ultra-sensitive, microscale tactile sensors, patient-customizable scaffolds for cardiac and nerve tissue regeneration, and flexible electrocardiogram (ECG) electrodes. Here, a novel elastomeric carbon nanocomposite is presented consisting of amino-functionalized carbon nanotubes (CNT-NH₂) homogenously dispersed in a one-part room-temperature vulcanizing (RTV) silicone matrix. The use of acetone as a swelling solvent aids in electrical percolation through the elastomer matrix. CNT-NH₂ ratios can be tuned to fit various needs; higher tensile strength is favored …

Enhanced Platinum (Ii) Drug Delivery For Anti-Cancer Therapy, Marek T. Wlodarczyk

Dissertations, Theses, and Capstone Projects

Over the years, anti-cancer therapies have improved the overall survival rate of patients. Nevertheless, the traditional free drug therapies still suffer from side effects and systemic toxicity, resulting in low drug dosages in the clinic. This often leads to suboptimal drug concentrations reaching cancer cells, contributing to treatment failure and drug resistance. Among available anti-cancer therapies, metallodrugs are of great interest. Platinum (II)-based agents are highly potent and are used to treat many cancers, including ovarian cancer (OC). Cisplatin (cis-diaminedichloroplatinum (II)) is the first Food and Drug Administration (FDA)-approved metallodrug for treatment of solid tumors, and its mechanism …

Synthesis And Self-Assembly Of Amphiphilic Block Copolymers For The Fabrication Of Non-Spherical Polymersomes, Tamuka Chidanguro

Dissertations

Polymersomes, also known as polymer vesicles, have gained a lot of interest over the past two decades. These hollow spherical systems are made via the self-assembly of amphiphilic block copolymers and have found use in a range of areas from drug delivery, to cellular models, to nanoreactors. Their hollow nature allows them to carry hydrophilic cargo in their inner compartment and hydrophobic cargo in their membrane. Over the last decade, increasing efforts have focused on controlling the morphology of polymersomes. Research has shown that polymersome morphology plays an important role for instance in drug delivery, where tubular or rod-like vesicles …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Design, Synthesis And Applications Of Nanoparticles In Suppression Of Mosquito-Born Flaviviridae Viruses, Maria R. Blahove

College of Graduate Studies: Theses & Dissertations

Recently, nanoparticles have become an origin of exploration in the chemistry field due to their unique medical uses. The current drug delivery models of nanoparticles often include a metal base with a drug conjugated to its surface. However this raises concerns regarding toxicity. A novel approach to solving this dilemma is the development of nanosized biocompatible polymer-based micelles, created from PEG-PCL-PEG triblock polymer, and formed around a drug of choice. The goal is to create a drug carrier nanoparticle system that is labile at a specific intracellular pH, without undue toxicity to the cell. This creates a drug-loaded nanoparticle that …

Ethoxylation And Polymerization Of Cardanol Derived Bifunctional Monomers, James Mgaya

Journal of Humanities and Social Sciences

Cardanol and its derivative; 3-(non-8-enyl)phenol (obtained by ethenolysis reaction of cardanol) were ethoxylated via one-pot reaction with urea and ethylene glycol using Na2CO3/ZnO as co-catalysts. The ethoxylates were later methoxycarbonylated using a 1,2-bis(ditertbutylphosphinomethyl)benzene (DTBPMB) modified palladium catalyst to produce ethoxylated bifunctional monomers. Polymerization of these monomers by heating in the presence of a standard polymerization catalyst, Ti(OBu)4, formed oligomers that were plastic-like. Analysis of these oligomers by MALDI-TOF MS indicated the condensation of up to nine monomer units.

Design And Synthesis Of Core–Shell Microgels With One‐Step Clickable Crosslinked Cores And Ultralow Crosslinked Shells, Molla R. Islam, Chelsea Nguy, Sanika Pandit, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

The present study is conducted to explore the engineering of core–shell microgels such that the core can be rapidly labeled with a variety of fluorophores, while the shell retains the softness needed in specific biomedical applications. Azide containing crosslinked core particles based on a crosslinked poly(N‐isopropylacrylamide) particle, using a one‐pot, multistep polymerization is synthesized. A core–shell microgel is then synthesized by growing a crosslinker‐free poly(N‐isopropylacrylamide)‐co‐acrylic acid (ULC10AAc) shell through a two‐step seed and feed polymerization. A simple “click” reaction between the azide present on the core and dibenzocyclooctyne containing fluorophores to make dyed core–shell …

I. Non-Degradable Polysiloxane Networks For Controlled Release Applications, And Ii. Additive Free, Degradable Silyl-Ether Furyl-Maleimide Networks, Caleb M. Bunton

Chemistry Theses and Dissertations

I. Two different series of non–degradable polysiloxane networks were prepared for the encapsulation and controlled release of a small molecule agent. For the first series, hydrosilylation was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and silylhydride functional poly(dimethyl)siloxanes. For the second series, the thiol-ene reaction was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and mercaptopropyl functional poly(dimethyl)siloxanes. Nile red dye was used as an encapsulated agent and dye release from each series of networks was measured using UV–vis spectroscopy to determine controllability …

Synthesis Of New Aliphatic Pseudo-Branched Polyester Co-Polymers For Biomedical Applications, Zachary Shaw

Electronic Theses & Dissertations

In this study, a hyperbranched polyester co-polymer was designed using a proprietary monomer and diethylene glycol or triethylene glycol as monomers. The synthesis was carried out using standard melt polymerization technique and catalyzed by p-Tolulenesulfonic acid. The progress of the reaction was monitored with respect to time and negative pressure, with samples being subjected to standard characterization protocols. The resulting polymers were purified using the solvent precipitation method and characterized using various chromatographic and spectroscopic methods including GPC, MALDI-TOF, and NMR. We have observed polymers with a molecular weight of 29,643 kDa and 33,996 kDa, which is ideal to be …

Using Green Emitting Ph-Responsive Nanogels To Report Environmental Changes Within Hydrogels: A Nanoprobe For Versatile Sensing, Mingning Zhu, Dongdong Lu, Shanglin Wu, Qing Lian, Wenkai Wang, L. Andrew Lyon, Weiguang Wang, Paulo Bártolo, Brian R. Saunders

Engineering Faculty Articles and Research

Remotely reporting the local environment within hydrogels using inexpensive laboratory techniques has excellent potential to improve our understanding of the nanometer-scale changes that cause macroscopic swelling or deswelling. Whilst photoluminescence (PL) spectroscopy is a popular method for such studies this approach commonly requires bespoke and time-consuming synthesis to attach fluorophores which may leave toxic residues. A promising and more versatile alternative is to use a pre-formed nanogel probe that contains a donor/acceptor pair and then “dope” that into the gel during gel assembly. Here, we introduce green-emitting methacrylic acid-based nanogel probe particles and use them to report the local environment …

Therapeutic Delivery Technology And Its Economic Impact, Paul E. Savas Jr.

Senior Honors Theses

Therapeutic delivery technology is a current area of high interest in both university and industrial settings. These technologies are being developed in order to deliver therapeutic agents, such as genes, proteins, and drugs, to patients more efficiently. Nanoscale delivery vehicles have proven to be useful for these applications; these vehicles may either be naturally produced or chemically synthesized. The physical properties of these nanomaterials must be characterized correctly using instrumentation that evaluates their size, morphology, and potential for agglomeration. These technologies represent a high-growth economic area that fosters entrepreneurship and innovation. Because of this innovative spirit, research and economic interest …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Combination Therapy: Parp Inhibitor Synergizes The Therapeutic Efficacy Of Doxorubicin In The Treatment Of Prostate Cancer, Momin Ansare

Electronic Theses & Dissertations

Men are most susceptible to prostate cancer in the United States. The general treatment options include surgery, hormone therapy, chemotherapy, and radiation therapy. But in recent days, the nanoformulation have shown promising applications in overcoming the drawbacks of the currently available treatment options. To complement, we tried to enhance the capability of the nanoparticle formulation by loading them with a novel drug combination for the treatment of prostate cancer. Herein, we synthesized folate conjugated iron oxide nanoparticles encapsulated with doxorubicin and olaparib for imaging and targeted treatment of prostate cancer. Both drugs are approved by FDA for clinical cancer treatment. …

Isolation Of Rna From A Mixture And Its Detection By Utilizing A Microgel-Based Optical Device, Molla R. Islam, Shakiba Azimi, Faranak Teimoory, Glen Loppnow, Michael J. Serpe

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

In this investigation, we show that RNA can be separated from a solution containing DNA and RNA and the isolated RNA can be detected using poly (N-isopropylacrylamide-co-N-(3-aminopropyl) methacrylamide hydrochloride) microgel-based optical devices (etalons). The isolation of RNA was accomplished by using hairpin-functionalized magnetic beads (MMPDNA) and differential melting, based on the fact that the DNA–RNA hybrid duplex is stronger (i.e., high melting temperature) than the DNA–DNA duplex (i.e., low melting temperature). By performing concurrent etalon sensing and fluorescent studies, we found that the MMPDNA combined with differential melting was capable of selectively separating RNA from DNA. This selective separation and …

Glucosamine From Hydrolysis Of 3d Printing Chitosan For Osteoarthritis Treatment, Ruj Dansriboon, Laphon Premcharoen

The International Student Science Fair 2018

This project aims to introduce a new way for osteoarthritis treatment which is expected to increase in the future. Glucosamine is the main subject for a treatment, which can be derived by hydrolyzing chitosan. This project also includes extraction of chitosan from shrimp waste to make a worthy use of food waste from industry. In this project, 3D printer is applied to print chitosan gel since 3D printing is adjustable to form various shapes of the gel.

The research process begins with the extraction of chitosan from shrimp shells. For the next step, the percent of deacetylation of chitosan was …

Microgel Core/Shell Architectures As Targeted Agents For Fibrinolysis, Purva Kodlekere, L. Andrew Lyon

Biology, Chemistry, and Environmental Sciences Faculty Articles and Research

We demonstrate the utility of microgel core/shell structures conjugated to fibrin-specific peptides as fibrinolytic agents. Poly(N-isopropylmethacrylamide) (pNIPMAm) based microgels conjugated to the peptide GPRPFPAC (GPRP) were observed to bring about fibrin clot erosion, merely through exploitation of the dynamic nature of the clots. These results suggest the potential utility of peptide–microgel hybrids in clot disruption and clotting modulation.

Functionalizing Titanium Implants With Bioactive Peptides To Increase Osseointegration, Neil Bernard

Williams Honors College, Honors Research Projects

Orthopedic surgeries have continued to increase, but the material of choice remains constant: titanium. Titanium has become the benchmark implant material due to its durability and non-immunogenic properties. However, while high rates of success are correlated with joint replacement surgery, certain patients with predisposed diseases such as diabetes or arthritis may have increased complications.¹ This can be due to lack of osseointegration due to decreased bone formation and mineralization,² which will lead to increased rates of infection or aseptic loosening of the implant from the bone. ³ Current methods to alleviate these complications include invasive revisional surgeries, which …

Two-Component Hydrogel As Biomimetic Vitreous Substitutes, Sruthi Santhanam

McKelvey School of Engineering Graduate Student Theses & Dissertations

The vitreous humor of the eye is a biological hydrogel principally composed of fibrillary collagen interspersed with semi-flexible polyelectrolyte, hyaluronic acid (HA). Certain pathological conditions necessitate its removal and replacement. Current vitreous substitutes, such as silicone oils and perfluorocarbons, are hydrophobic, do not resemble the properties of the vitreous, and have known complications. An ideal vitreous substitute should have properties of the natural vitreous, perform its functions, and be biocompatible in the eye. Inspired by the structure and composition of the natural vitreous, we used bio-mimicry to develop an injectable two-component hydrogel. The hydrogel is composed of a fibrillary gellan, …

Regioselective Baeyer–Villiger Oxidation Of Lignin Model Compounds With Tin Beta Zeolite Catalyst And Hydrogen Peroxide, John Adam Jennings, Sean R. Parkin, Eric Munson, Sean Delaney, Julie L. Calahan, Mark Isaacs, Kunlun Hong, Mark Crocker

Chemistry Faculty Publications

Lignin depolymerization represents a promising approach to the sustainable production of aromatic molecules. One potential approach to the stepwise depolymerization of lignin involves oxidation of the benzylic alcohol group in β-O-4 and β-1 linkages, followed by Baeyer–Villiger oxidation (BVO) of the resulting ketones and subsequent ester hydrolysis. Towards this goal, BVO reactions were performed on 2-adamantanone, a series of acetophenone derivatives, and lignin model compounds using a tin beta zeolite/hydrogen peroxide biphasic system. XRD, ¹¹⁹Sn MAS NMR spectroscopy, DRUVS and XPS were used to determine tin speciation in the catalyst, the presence of both framework Sn and extra framework …

One-Pot Syntheses And Characterizations Of “Click-Able” Polyester Polymers For Potential Biomedical Applications, James F. Beach Ii

Electronic Theses & Dissertations

In this study, a synthetic polyester polymer was designed using polyethylene glycol, sorbitol, glutaric acid and 4-pentynoic acid as monomers. The synthesis was carried out using standard melt polymerization technique and catalyzed by Novozyme-435, an enzyme suitable for polyesterification of biocompatible compounds. The progress of the reaction was monitored with respect to time and vacuum exposure, with samples being subjected to standard characterization protocols. Polymers with high molecular weight and water solubility were chosen for further modification into folate-functionalized polymeric nanoparticles for targeted drug delivery to cancer cells. This was achieved by employing a solvent diffusion method, wherein the polymer …

Polymer Micelle Formulation For The Proteasome Inhibitor Drug Carfilzomib: Anticancer Efficacy And Pharmacokinetic Studies In Mice, Ji Eun Park, Se-Eun Chun, Derek Alexander Reichel, Jee Sun Min, Su-Chan Lee, Songhee Han, Gongmi Ryoo, Yunseok Oh, Shin-Hyung Park, Heon-Min Ryu, Kyung Bo Kim, Ho-Young Lee, Soo Kyung Bae, Younsoo Bae, Wooin Lee

Pharmaceutical Sciences Faculty Publications

Carfilzomib (CFZ) is a peptide epoxyketone proteasome inhibitor approved for the treatment of multiple myeloma (MM). Despite the remarkable efficacy of CFZ against MM, the clinical trials in patients with solid cancers yielded rather disappointing results with minimal clinical benefits. Rapid degradation of CFZ in vivo and its poor penetration to tumor sites are considered to be major factors limiting its efficacy against solid cancers. We previously reported that polymer micelles (PMs) composed of biodegradable block copolymers poly(ethylene glycol) (PEG) and poly(caprolactone) (PCL) can improve the metabolic stability of CFZ in vitro. Here, we prepared the CFZ-loaded PM, PEG-PCL-deoxycholic …

Micro-Spectroscopy Of Bio-Assemblies At The Single Cell Level, Jeslin Kera

Honors Undergraduate Theses

In this thesis, we investigate biological molecules on a micron scale in the ultraviolet spectral region through the non-destructive confocal absorption microscopy. The setup involves a combination of confocal microscope with a UV light excitation beam to measure the optical absorption spectra with spatial resolution of 1.4 μm in the lateral and 3.6 μm in the axial direction. Confocal absorption microscopy has the benefits of requiring no labels and only low light intensity for excitation while providing a strong signal from the contrast generated by the attenuation of propagating light due to absorption. This enables spatially resolved measurements of single …

Synthesis Of Multifunctional Polyacrylates And A Binding Group To Hemoglobin For The Treatment Of Traumatic Brain Injuries, Marina Michaud

Honors College Theses

Hemoglobin based oxygen carriers (HBOCs) hold promise as an effective emergency treatment of severe traumatic brain injuries (TBI). In the latest generation of HBOCs, polynitroxyl-pegylated hemoglobin (PNPH), cell-free hemoglobin is modified with TEMPO and PEG which reduce the toxicities associated with earlier generations of HBOCs. In our efforts to optimize the economic and therapeutic impacts of PNPH’s we have synthesized polydimethylaminoethyl methacrylate (poly-DMAEMA) under controlled living conditions via reverse addition-fragmentation chain transfer (RAFT) polymerization. The poly-DMAEMA was then successfully functionalized via quaternization of its NMe₂ groups using chloroacetate derivatives of the TEMPO and PEG. This process was quantitative and …

Synthesis, Self-Assembly, And Immunological Activity Of Α-Galactose-Functionalized Dendron–Lipid Amphiphiles, John Trant, Namrata Jain, D. M. Mazzuca, J Trevor Mcintosh, Bo Fan, S M Mansour Haeryfar, Sebastien Lecommandoux, Elizabeth Gillies

Chemistry Publications

Nanoassemblies presenting multivalent displays of biologically active carbohydrates are of significant interest for a wide array of biomedical applications ranging from drug delivery to immunotherapy. In this study, glycodendron–lipid hybrids were developed as a new and tunable class of dendritic amphiphiles. A modular synthesis was used to prepare dendron–lipid hybrids comprising distearylglycerol and 0 through 4th generation polyester dendrons with peripheral protected amines. Following deprotection of the amines, an isothiocyanate derivative of C-linked α-galactose (α-Gal) was conjugated to the dendron peripheries, affording amphiphiles with 1 to 16 α-Gal moieties. Self-assembly in …