Polymer Chemistry Commons^™

The Effects Of Color Concentrates On The Rheology Of Tint Bases, Doug James Herrick

Master's Theses

ABSTRACT

THE EFFECTS OF COLOR CONCENTRATES ON THE RHEOLOGY OF TINT BASES

Douglas James Herrick

Waterborne coatings are formulated with a number of different ingredients; water, latex polymers, pigments, surfactants, dispersants, defoamers, biocides, coalescing aids, and rheology modifiers or thickeners. Rheology modifiers are necessary in order to improve the physical properties of the coating before, during, and after application to a substrate. There are two kinds of rheology modifiers used in waterborne coatings; associative thickeners and non-associative thickeners. Coatings formulated with associative thickeners are quite sensitive to coating variations; the slightest change in the formulation has profound effects on the …

In Situ Measurements Of Electron-Beam-Induced Surface Voltage Of Highly Resistive Materials, Joshua Hodges

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Surface charging and subsequent electrostatic discharge due to interactions with the space environment is one of the primary concerns of spacecraft charging studies. Laboratory measurements of the evolution of surface voltages and dissipation currents under simulated space conditions are the primary method used to determine the response of key spacecraft materials to diverse incident fluxes. Increasing the database of information for the electronic properties of insulating materials can assist spacecraft designers in mitigating the harsh effects of the space environment.

The Utah State Materials Physics Group, with the funding of the NASA James Webb Space Telescope project and personnel support …

A Review On The Visible Light Active Titanium Dioxide Photocatalysts For Environmental Applications, Miguel Pelaez, Nicholas Nolan, Suresh Pillai, Michael Seery, Polycarpos Falaras, Athanassios G. Kontos, Patrick S.M. Dunlop, Jeremy W.J. Hamiltone, J. Anthony Byrne, Kevin O’Shea, Mohammad H. Entezari, Dionysios D. Dionysiou

Articles

Development of visible light active (VLA) titania photocatalysts

Fujishima and Honda (1972) demonstrated the potential of titanium dioxide (TiO 2) semiconductor mate-rials to split water into hydrogen and oxygen in a photo-electrochemical cell. Their work triggered the development of semiconductor photocatalysis for a wide range of environmental and energy applica-tions. One of the most significant scientific and commercial advances to date has been the development of visible light active (VLA) TiO2 photocatalytic materials. In this review, a background on TiO2 struc-ture, properties and electronic properties in photocatalysis is presented. The development of different strategies to modify TiO2 for the utilization …

Development Of A Quantitative High Throughput Method For The Early Detection Of Corrosion On Coated Aluminum, Jeffrey Clayton Foster

Master's Theses

Eight fluorescent indicators were evaluated for their ability to detect the corrosion of aluminum metal substrates. The fluorophore Rhodamine-salicylaldehyde (RSA) was selected as a candidate for further study based on its ability to bind and detect aluminum ions at low concentrations, its selectivity for aluminum ions, its long-term stability, its solubility in our solvent-based epoxy formulation, and its compatibility with our testing method.

A recent publication suggested that an alternative method of fluorescence activation was possible—an acid-promoted ring opening that occurred in the absence of metal ions. To prove the capability of RSA to bind aluminum ions, thorough ¹H …

The Development Of Transparent, Processable, Thermally-Responsive Coatings, Christopher David Roland

Master's Theses

Polymer matrices are commonly used as guest-host systems for organic chromophores for use in non-linear optical materials. The chromophores must be aligned or poled in an electric field in order to impart anisotropy and non-linear activity to the material. This poling process raises several issues, the two largest being the eventual relaxation of the chromophores back into random orientations due to brownian motion, and high molecular weight polymer matrices limiting chromophore mobility during poling. The prevention of this relaxation process is an area of significant interest, especially in applications that require long term coating stability and activity. In this study, …

Active Response Of Polymer Materials From External Stimuli – Solvents And Light; Grafting Reactions On Perovskite Layers, Jianxia Zhang

LSU New Orleans Theses and Dissertations

The active response of a series of polymeric materials was investigated. Both solvent activated and light activated thin films and wire systems show dynamic behaviors when exposed to different stimuli.

Solvent mediated fluxional behavior of polymer thin films involved extensive, rapid curling both on infusion and evaporation of good solvents. These films can be either lab-fabricated ones or commercial ones, and the curling behavior can be as fast as seconds. Conditions including polymer materials, chosen solvents, and film geometry can affect the behavior.

Methods that allowed for the creation and retention of distorted wire structures were also developed; the asymmetric …

Hydro/Solvothermal Synthesis, Structures And Properties Of Metal-Organic Frameworks Based On S-Block Metals, Raj Kishore Vakiti

Masters Theses & Specialist Projects

Carbon dioxide removal from flue gases of power plants is critical for reduction of greenhouse gas emissions implicated in global warming. Metal Organic Frameworks (MOFs) promising potential applications in carbon dioxide capture due to their unique structural properties such as high porosity and high thermal stability. These MOFs have application in separation processes and gas storage. By the assembly of the organic ligands and metal oxide clusters, porous MOFs can be synthesized. The use of s-block metals such as calcium, magnesium and rubidium in porous materials is appealing because their ionic binding characters with organic ligands will general flexible MOFs. …

Modern Approaches For Multifunctional Hydrolyzying Thiol-Ene Networks, Nicole Marie Mackey

Dissertations

Marine fouling has been an expensive and time-consuming process for navies and fishermen by the accumulation of marine algae and animals on artificial surfaces. Many coatings have been proposed to combat marine fouling in efforts to extend the lifetime of objects immersed in sea water. However, all coatings tested have either failed to resist fouling for a significant length of time or have released toxins into the environment. We have investigated an environmentally friendly approach to address the problem of marine fouling through the synthesis and preparation of a biocidal and a self-polishing coating. Both novel monomers were prepared containing …

Preparation And Rapid Analysis Of Antibacterial Silver, Copper And Zinc Doped Sol–Gel Surfaces, Brendan Duffy, Swarna Jaiswal, Patrick Mchale

Articles

The colonisation of clinical and industrial surfaces with microorganisms, including antibiotic-resistant strains, has promoted increased research into the development of effective antibacterial and antifouling coatings. This study describes the preparation of metal nitrate (Ag, Cu, Zn) doped methyltriethoxysilane (MTEOS) coatings and the rapid assessment of their antibacterial activity using polyproylene microtitre plates. Microtitre plate wells were coated with different volumes of liquid sol–gel and cured under various conditions. Curing parameters were analysed by thermogravimetric analysis (TGA) and visual examination. The optimum curing conditions were determined to be 50–70C using a volume of 200ul. The coated wells were challenged with Gram-positive …

Synthesis Of An Antimicrobial Textile Coating, William M. Morris

Chemistry and Biochemistry

A titania nanosol was synthesized and coated onto nylon/cotton blended textile substrates. The substrates were characterized via SEM for adhesion and nanoparticle formation, then subjected to antimicrobial efficacy tests. The titania nanosol was successfully coated on to textiles samples. Particles were observed to be around 2 by 3 micrometers and formed between the interstitial space of textile fibers. Although larger than typical nanoparticles, the coatings exhibited what seemed to be antimicrobial activity. Titania nanosol coated textile samples were subjected to Kirby Bauer Assay in the presence of S. aureus. The coated textile sample exhibited an inhibition of growth around its …

The Investigation Of Asphaltene-Naphithenic Acid And Asphaltene-Surface Interactions, David Tristan Heaps

Dissertations

Asphaltenes represent a ubiquitous problem in the oil industry due to their adverse effects on recovery, production, and processing equipment. These problems have affected oil companies throughout the world, resulting in significant financial losses. In order to expand the existing body of knowledge related to asphaltenes, we have examined how the presence of naphthenic acids contributes to the particle aggregation and sedimentation behavior of asphaltene suspensions as well as how the physics and chemistry of a substrate affect asphaltene adsorption/deposition.

The flocculation of asphaltenes in the presence of naphthenic acids was investigated using dynamic light scattering (DLS), near-infrared spectroscopy (NIR), …

Wetting Properties Induced In Nano-Composite Poss-Ma Polymer Films By Atomic Layer Deposited Oxides, Kyle A. Vasquez, Anita J. Vincent-Johnson, W. Chris Hughes, Brian H. Augustine, Kyoungmi Lee, Gregory N. Parsons, Giovanna Scarel

Department of Physics and Astronomy - Faculty Scholarship

Due to their unique properties, nano-composite polyhedral oligomeric silsequioxane (POSS) copolymer films are attractive for various applications. Here we show that their natural hydrophobic character can become hydrophilic when the films are modified by a thin oxide layer, up to 8 nm thick, prepared using atomic layer deposition. A proper choice of the deposition temperature and thickness of the oxide layer are required to achieve this goal. Unlike other polymeric systems, a marked transition to a hydrophilic state is observed with oxide layers deposited at increasing temperatures up to the glass transition temperature (∼110 °C) of the POSS copolymer film. …

Effects Of Ambient Gases On Icf Target Capsules, Bryan Chambers, Steve Letts, Michael Stadermann

STAR Program Research Presentations

We researched how the chemical and physical properties of a plasma polymer fuel capsule change as they are exposed to ambient gases. The fuel capsules contain the deuterium fuel inside them, they serve as the outer shell for the fuel and act as a ablator for the process. If they are reactive or diffusive with the atmosphere this can change their mass and effect the outcome of the fusion shots performed at the National Ignition Facility where High Powered Lasers are incident upon a gold hohlraum containing a capsule. We discovered that nitrogen and water vapor diffuse into the material …

The Preparation Of Functional Surfaces, Philip Thomas Dirlam

Master's Theses

Diels-Alder chemistry was utilized to manipulate the surface energy of glass substrates in reversible manner. Glass slides and capillaries were functionalized with hydrophobic dieneophiles resulting in a  non-wetting surface.  A retro Diels-Alder reaction facilitated by the thermal treatment of the surface’s function to cleave the hydrophobic dieneophile and resulted in the fabrication of a hydrophilic surface. Contact angle (CA) measurements were used as preliminary measurements for monitoring the changes in surface energy exhibited during the initial hydrophobic state (CA - 70±3°), after attachment of the dieneophile creating  a hydrophobic state (CA - 101±9°) followed by reestablishment of the hydrophilic state …

Development And Extrapolation Of An Undergraduate Laboratory Experiment To An Elastomeric Spinal Muscular Atrophy Brace, Richard Sterling Brose

Master's Theses

Ever since the advent of polymer science, polyurethanes have played a huge role in the industrial world. They have been used in endless applications from furniture padding to aircraft coatings, to binders for insensitive munitions. It is therefore important that the chemistry of polyurethanes is well understood as well as the ability to draw relationships between the raw materials selected and the end-use properties of the polymer. Because of the multitude of practical applications, the development of an undergraduate polymer chemistry laboratory focused on polyurethane elastomers is developed and described herein. Polymer chemistry students are exposed to hydroxyterminated polybutadiene (HTPB) …

Resorbable Polymer-Hydroxyapatite Composites For Bone Trauma Treatment: Synthesis And Properties, Troy E. Wiegand

Department of Chemistry: Dissertations, Theses, and Student Research

Contemporary therapies for hard tissue replacement involve allographs, where the donor and recipient are of the same species, or the use of xenogenic transplants.  Intraspecies materials are often in short supply and interspecies materials are subject to immunological barriers such as disease and tissue rejection.  Synthetic composites are unencumbered by these limitations.  Poly lactic acid (PLLA) and its copolymers have been used in medicine due to their ability to be resorbed by the body without adverse effects.  PLLA’s are currently most commonly used in resorbable sutures and gauzes, but there is increasing interest in using them in conjunction with hydroxyapatite …

Micro- And Nanoparticles In Uv-Cured Thin Films, T. Christopher Corkery, Joseph Chan, Mike J. Idacavage, Elizabeth R. Gillies, Paul J. Ragogna

Chemistry Presentations

No abstract provided.

Design, Synthesis, And Polymerization Of Novel Heterocyclic Monomers As Precursors For Functional Polyester, Poly(Ester Amide)S And Polyamides, Eylem Tarkin-Tas

Dissertations

The research presented in this dissertation involves the synthesis and polymerization of heterocyclic monomers which pave the way to biodegradable polyester nanocomposites, functional polyesters or poly(ester amide)s, functional polyamides and supramolecular polymers. The key monomers are ε-caprolactone, γ-acetamido-ε- caprolactone, γ-ethylene ketal-ε-caprolactam and α-amino-ε-caprolactam.

Poly(ε-caprolactone) organo-modified montmorillonite nanocomposites were prepared by in-situ polymerization using dibutyltin dimethoxide as initiator/catalyst. The montmorillonite was first modified with 1-decyl-2-methyl-3-(11-hydroxyundecyl)- imidazolium cation. The hydroxyl functionality was used for not only initiating polymer chains from the surface of the clay platelets but also for grafting polymer chains to the surface by acting as a reversible chain transfer …

Structure-Property Correlation In Cyclopolymerization Of New Acrylate-Based Functional Monomers, Huseyin Tas

Dissertations

New ether dimer; (ED-Od) and (ED-Eh) and diester; (ODE) and (EHDE) derivatives of α-(hydroxymethyl)acrylate, each having two octadecyl and 2-ethylhexyl side chains respectively, and an amine-linked di(2-ethylhexyl)acrylate (AL-Eh), having three 2-ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, Tg. The free radical polymerizations of these monomers yielded high molecular weight polymers. Cyclopolymer formation of ED-Od, ED-Eh and AL-Eh was confirmed by 13C NMR analysis and the cyclization efficiencies were found to be very high (~100%). Copolymers of ED-Od, ODE, ED-Eh, EHDE, …

Rational Design Of Self-Assembled Nanostructures Based On Polymers Synthesized Via Aqueous Reversible Addition-Fragmentation Chain Transfer Polymerization, Stacey Kirkland York

Dissertations

Recent advances in reversible addition-fragmentation chain transfer (RAFT) polymerization have allowed the rational, bottom-up design of biorelevant assemblies. Utilizing foresight, polymers can be tailored to self-assemble into nano-, micro-, and macroscopic structures. Given the size scale on which rationally-designed polymers can be tailored, they hold significant promise in the biomedical field. For example, nanoscale materials can be designed to carry small-molecule and gene therapeutics while macroscopic structures can be tailored for cell growth scaffolds. The design process begins by selecting monomers, chain transfer agents, and reaction conditions which will yield the desired polymer architecture and composition.

The work herein builds …

Investigation Of Novel Quasiliving Polyisobutylene Chain-End Functionalization (Quenching) Methods, David Lee Morgan

Dissertations

This volume recounts efforts toward the development and understanding of chain functionalization techniques involving the direct addition of nucleophiles to quasiliving polyisobutylene (PIB). Nucleophiles included in the study were sterically hindered organic bases, (di)sulfides, N-substituted pyrroles, and alkoxybenzenes. A kinetic investigation of the end-quenching of TiCl4-catalyzed quasiliving PIB with sterically hindered amines was used to determine the mode of interaction with TiCl4 and the active species responsible for -proton abstraction. 2,5-disubstituted-N-hydropyrroles formed pyrrole-TiCl3 adducts that were active in formation of exo-olefin chain ends; whereas, with other sterically hindered amines, only an equilibrium fraction of the amine that did not complex …

Nanomaterials From Biologically Active Molecules: Self-Assembly And Molecular Recognition, Min Yu

Dissertations

This dissertation describes the development of molecular assemblies and molecular recognition of phospholipids (PLs) that exhibit potential applications in emerging nanotechnologies. It consists of two parts: (1) structural features of PLs responsible for recognition of synthetic copolymers, and (2) design, synthesis and analysis of magnetic nanotubes obtained from PLs with a common theme of colloidal synthesis served as a platform for film formation and nano-assemblies of nanotubes. Poly(methyl methacrylate/n-butyl acrylate) (p-MMA/nBA) colloidal particles that were stabilized by 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) PLs were synthesized, and upon the particle coalescence, PL stratification resulted in the formation of surface localized ionic clusters (SLICs). These …

Aqueous Raft Synthesis Of Stimuli-Responsive, Amphiphilic Block Copolymers And Self-Assembly Behavior In Solution And Incorporation Into Lbl Films, Matthew Grady Kellum

Dissertations

Of all the living radical polymerization techniques, reversible addition– fragmentation chain transfer (RAFT) polymerization is arguably the most versatile in terms of the reaction conditions (e.g. temperature and solvent selection), monomer selection (e.g. neutral, anionic, cationic, and zwitterionic), and purification. Since the introduction of RAFT in 1998, the McCormick research group and others including the Lowe, Sumerlin, and Davis research groups have synthesized a wide range of (co)polymers with predetermined molecular weights, low polydispersities, and advanced architectures utilizing aqueous RAFT (ARAFT) polymerization. These research groups have also studied how various block copolymers exhibit stimuli-responsive behavior due to a change in …

Multi Stimuli-Responsive Copolymers Obtained From Colloidal Dispersions, Fang Liu

Dissertations

This dissertation describes the design, synthesis, and development of multi stimuli-responsive random copolymers that exhibit collective responsiveness to temperature, pH or electromagnetic radiation. New colloidal particles of poly(N-(DL)-(1- Hydroxyymethyl) propylmethacrylamide/n-butyl acrylate) (p(DL-HMPMA/nBA) and poly(2-(N,N′-dimethylamino)ethyl methacrylate/n-butyl acrylate) (p(DMAEMA/nBA)) were synthesized, which upon coalesce to form solid continuous films. The presence of lower glass transition (Tg) nBA components not only facilitate film formation, but also provide sufficient free volume for polymer chain rearrangements. These studies showed that coalesced films exhibit 3D dimensional changes upon external stimuli, which are attributed to the collapse and conformational changes of stimuli-responsive components as well as buckling …

Synthesis, Characterization, And Deuterium Labeling Of Polyamides Studied By Nuclear Magnetic Resonance Spectroscopy, Christopher Allen Lange

Dissertations

The synthesis, characterization, and deuterium labeling of polyamides have been investigated. In Chapter II, selective deuterium labeling of various polyamides was demonstrated via a facile method which does not require organic solvent or catalyst. Quantitative solution-state NMR analysis showed deuterium incorporation at the carbon alpha to the carbonyl ranged from 20-75%. Incorporation in ε-caprolactam increased with repeated treatments. Isotopic shift effects for the deuterated materials were additive for all sites within experimental error.

In Chapter III, the effect of stoichiometric imbalances on the polymerization of poly(dodecamethylene terephthalamide)was investigated. Molecular weight was varied by polymerizing the monomer salt with excess diaminododecane, …

Structure-Property Relationships In The Formation Of Polyphenylsulfone Molecular Composites And Nanocomposites, Paul Joseph Jones

Dissertations

As the constituent phases in a polymer composite approach the molecular level, specific phenomena occur that can lead to significant changes in material properties when only minimal quantities of the additive are incorporated into the polymer matrix. Molecular composite and nanocomposites are state-of-the-art polymeric materials that contain nanostructured additives effectively dispersed within polymer matrices. The properties of molecular composites and nanocomposites are directly related to the interactions of the nanostructured additive and the polymer matrix. Subtle changes to the nanostructured additive can have profound effects on the ultimate properties of the composite material. Therefore, understanding the structure-property relationships in these …

Dual-Action Hygienic Coatings: Benefits Of Hydrophobicity And Silver Ion Release And Surface Analysis, Niall Stobie, Brendan Duffy, John Colreavy, Patrick Mchale, Steven Hinder, Declan Mccormack

Articles

Coatings that demonstrate reduced attachment of crystalline precipitates and the medical device colonising Staphylococcus epidermidis were prepared by the immobilisation of silver doped perfluoropolyether–urethane siloxane thin films on glass substrates. The presence of stratified hydrophobic perfluoropolyether groups protects the coating surface from the attachment of crystalline hydrophilic species such as chlorides and phosphates, whilst silver ion release inhibited attachment of S. epidermidis and subsequent biofilm formation in vitro. The release of silver ions protects the perfluoro groups from the hydrophobic interactions of S. epidermidis cells, which can reduce the hydrophobicity of the protective coating. These coatings also exhibited significant antibacterial …

Investigation Of Network Architecture Development And Properties In Thermoset Matrices, Jeremy Owen Swanson

Dissertations

Matrices employed in composite materials directly influence overall composite properties. In all thermoset materials, molecular level interactions and transformations during cure result in heterogeneous architecture. Variability in connectivity results from the often dramatic spatial and topological changes that occur during the crosslinking process. Compatibility (fillers, pigments, additives), temperature gradients and reactivity differences in the precursors only serve to increase the complexity of network formation. The objective of the research herein is to characterize and understand the relationships between cure conditions, conversion, connectivity, network architecture and properties in glassy thermosetting matrix resins.

In this research, epoxy and vinyl ester resins (VERs) …

Investigation Of Novel Thiol "Click" Reactions, Justin William Chan

Dissertations

The thio-Michael addition reaction is traditionally considered a base catalyzed reaction which involves high catalyst concentrations and long reaction times. This reaction utilizes potent, simple nucleophiles to catalyze the reaction, decreases the catalyst concentration and greatly increases the reaction times. The free radical mediated thiol-ene click reaction uses light or heat and an initiator to catalyze the rapid and quantitative addition of thiols to most electron rich enes without the formation of side products and in the absence of solvent. Recently, the thiol-ene click reaction has been exploited for these reasons in materials science and organic synthesis. The research herein …

Investigation Of The Relationship Between Polymer Structures And Thermal, Mechanical, Viscoelastic Properties, Ethem Kaya

Dissertations

The research presented in this dissertation involves four distinct areas: physical crosslinking systems, UV curable coatings for enhanced oxygen and carbon dioxide barrier properties, synthesis, and investigation of melting behavior/crystallinity relations of linear polyamides with long alkyl chains, and synthesis and characterization of cyclic diamides as precursors to linear polyamides 6 4.

The physical crosslinking section involves synthesis of monomers and polymers bearing cyclodextrin and adamantane pendent groups, and investigation of non-covalent interactions between these polymers (Chapter II). Two methacrylate monomers bearing cyclodextrin and adamantane were synthesized, and copolymerized with poly(ethylene glycol) methyl ether methacrylate. The specific interaction between copolymers …