Polymer Chemistry Commons^™

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Targeting Chemical Pollutants Through Assimilation Of Hydrophobic Deep Eutectic Solvents With Metal-Organic Frameworks, Carbon Nanotubes, And Activated Carbon, Tanner William Baughman

ONU Student Research Colloquium

Water contamination by heavy metals has a harmful human threat to the environment and to human health. This is derived from their bioaccumulation and toxicity characteristics. The study directly looks at the assimilated of lignin-derived hydrophobic deep eutectic solvents (HDES) with 3 different class of materials: Metal-Organic Frameworks (MOFs), Carbon Nanotubes (CNTs), and Activated Carbon (AC). Four different HDES mixtures were assimilated into these porous materials through impregnation. Composites were evaluated by characteristic peaks through Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The morphology of the samples was assessed as well through scanning electron microscopy (SEM). The colloidal stability …

Anthrone-Based Dummy Molecularly Imprinted Polymer For The Selective Detection Of Fluorene And Phenanthrene In Simulated River Water, Aria Pinandita, Nurrahmi Handayani, Muhammad Iqbal, Untung Triadhi, Rusnadi Rusnadi, Samitha Dewi Djajanti, Muhammad Bachri Amran, Muhammad Ali Zulfikar

Makara Journal of Science

A dummy-template molecularly imprinted polymer (DMIP) was synthesized via precipitation polymerization using anthrone as a template analog for the selective analysis of low-molecular-weight polycyclic aromatic hydrocarbons (PAHs), specifically fluorene and phenanthrene. Styrene, benzoyl peroxide, and ethylene glycol dimethacrylate were employed as the functional monomer, radical initiator, and crosslinking agent, respectively. The synthesized polymers were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and particle size analysis. The imprinting factors were 1.16 and 1.09 for fluorene and phenanthrene, respectively, indicating enhanced affinity of the imprinted sites. High-performance liquid chromatography analysis following DMIP-based solid-phase extraction yielded recoveries of 91.49% ± 3.87% for …

Trade-Off Between Limonene & Geraniol-Based Reprocessable And Non-Reprocessable Epoxy Thermosets: Role Of Aliphatic Diamines In Polymer Networks Design, Priyankkumar Kanubhai Patel

Electronic Theses & Dissertations

The growing demand for sustainable materials, driven by environmental concerns and the rapid depletion of fossil fuels, has garnered significant attention in the fabrication of bio-based epoxy thermosets as renewable alternatives to petroleum-derived thermosetting polymers. The present study focuses on the synthesis and characterization of epoxy prepolymer resins derived from limonene and geraniol via a two-step process, followed by the fabrication of thermally cross-linked flexible epoxy thermoset films using various traditional aliphatic diamine curing agents, namely 1,2-ethylenediamine (EDA), 1,4-butylenediamine (BDA), and 1,6-hexamethylenediamine (HDA). Additionally, the incorporation of cystamine, a disulfide-containing diamine, enabled the formation of a covalent adaptable network through …

Recyclable Composites Prepared From Animal Coproducts And Industrial Waste Sulfur, Perla Y. Sauceda-Oloño

All Dissertations

Pursuing sustainable and environmentally friendly materials has become a significant objective in materials science, particularly flame retardants and construction materials. This dissertation explores the development and evaluation of novel composites and high sulfur-content materials (HSMs) as potential alternatives to conventional, environmentally harmful materials.

Chapter one reviews recent advancements in environmentally benign flame-retardant additives, highlighting the potential of bio-derived phenols, polysaccharide derivatives, and greener phosphorus sources. The review discusses how green additives can enhance the flame retardancy, thermal stability, and smoke suppression properties of various polymers while addressing the challenges and future directions in the field.

Chapter two investigates the production …

Thin-Film Nanocomposite Membranes With Alumina Nanoparticles For Textile Wastewater Treatment Applications, Amr Mohamed Tayel

Theses and Dissertations

Thin-film nanocomposite (TFN) membranes are gaining great interest in industrial wastewater treatment due to their superior performance, especially for higher water flux and pollutants’ rejection, as well as improved chemical, thermal and mechanical stabilities, compared to other types of membranes. The performance of TFN membranes can be enhanced using different types of nanofillers, among which ceramic nanomaterials, such as Al2O3, offer a promising potential for applications involving treatment of industrial wastewater such as textile effluents, and this is due to their stability, hydrophilicity, and relative low cost. The study of the TFN membrane properties and structure allows the optimization and …

The Surface Chemistry And Binding Interactions Of Lignin With Polymer-Encapsulated Gold Nanoparticles Acting As Model Microplastics, Oluwaseun Ayodeji Akinsola

All Master's Theses

This study investigates the surface chemistry and molecular-level interactions between lignin, a special type of natural organic matter, and polymer-capped gold nanoparticles, shedding light on the strength of adsorption between lignin and nanoscale polymer surfaces. Specifically, the study presents a variety of nanoscale polymer surfaces displaying different charged functional groups, using layer-by-layer assembly of three polyelectrolytes (polyallylamine hydrochloride (PAH)), polyacrylic acid (PAA), and poly(diallyldimethylammonium chloride (PDADMAC)) on 90 nm citrate-stabilized gold nanoparticles (AuNPs). This approach provides a library of polymer-encapsulated AuNPs for investigating the binding interactions of lignin to nanoscale polymers via spectroscopic techniques. ζ-potential, dynamic light scattering (DLS), …

Synthesis, Functionalization, And Application Of Polymeric Membrane Blends Of Polysulfone, Poly-Ether Ether-Ketone, And Natural Fiber Additive Biochar For Optimal Water Treatment., Abelline Katusiime Fionah

Theses and Dissertations--Chemistry

According to the Center for disease control (CDC), an estimated 1.7 to 2.2 million persons die from waterborne diseases annually. The majority of individuals dying from diseases resulting from unsafe drinking water, such as diarrhea and gastroenteritis, are children. This has in turn created a global water crisis. Different methods have been developed to treat contaminated water in response to the global water crisis such as adsorption, filtration, ozonolysis, catalysis, etc. Of the methods available, filtration via polymeric membranes has been one of the most successfully applied. A membrane is a thin semi-permeable barrier (often made of a polymer) used …

Composite And Polymer Formulation Employing Sulfur And Bio-Olefin Feedstocks, Claudia V. Lopez

All Dissertations

Environmental sustainability represents a challenge for society since industrial growth has a direct impact on natural resources and waste production. New technologies that effectively incorporate waste into renewable resources are critical to the development of a sustainable and circular economy. The manufacturing of structural materials like Portland cement (OPC) is responsible for >8% of the global anthropogenic emissions of carbon dioxide, with ~ 1 kg of CO₂ released to the atmosphere for every kilogram of OPC produced. For instance, the development of sustainable structural materials is a key factor to reduce the greenhouse emissions and to attenuate the climate …

The Effect Of The Carbon Nanotubes’ Surface Area On The Morphology And Performance Of Cellulose Acetate Nanocomposite Membranes In Nanofiltration Applications, Nouran Elbadawi

Theses and Dissertations

Population increase and climate change have significantly affected the availability of fresh water for consumption. Studies by UNESCO showed that more than 28% of the world population didn’t have access to clean safe drinking water in 2020. This situation is expected to get more serious over the coming 30 years with the limited availability of natural fresh water sources. The need to find solutions from alternative non-freshwater resources for drinking or irrigation is becoming a necessity. Within the context of desalination technologies, thousands of investigations are conducted to find the cheapest most efficient way of water treatment aiming at expanding …

New Alkyd Resins From Underutilized Indigenous Seed Oils: Synthesis And Characterization, Aliru O. Mustapha, Hakeem B. Ayoku, Halimah A. Amao

Karbala International Journal of Modern Science

The underutilization of sesame (Sesamum indicum L.), sweet almond (Prunus amygdalus), and jatropha (Jatropha curcas) seeds indicates a significant resource waste. Nine different varieties of 25% (short), 40% (medium), and 60% (long) alkyd resins were produced from the cross-section of drying, semi-drying, and non-drying oils. A large amount of conversion occurred, with the extent of the reaction (Pav) decreasing as time progressed and the corresponding increase in alkyds' average degree of polymerization (Dp) showing synthesized alkyds. Surface drying from the set-to-dry and dry-through periods climaxed at 2 hours for all the alkyds. Except for alkali, synthesized alkyd resins demonstrated outstanding …

Carbon Dioxide Capture Potential Of Chitosan-Nanocrystalline Cellulose Aerogel Composite Materials: Synthesis, Functionalization, And Characterization, Victor Oghenekohwo

Theses and Dissertations

The carbon dioxide capture technology has been established as an invaluable player in the current global efforts to allay the warming of the planet and climate change. In this connection, the study centers on the valorization of waste organic materials for the application described herein. The sorbents, sourced from a combination of by-products of food processing and agricultural residue waste products, viz. seafood waste and sugarcane bagasse, showed prospects for selective carbon dioxide capture, adsorbing up to 5.78 mg/g of the gas at 273 K and 2.82 mg/g at 298 K, as observed on the Micromeritic ASAP 2020 surface area …

Development Of An Effective Au:Pd Bimetallic Heterogeneous Catalyst For Oxidative Lignin Depolymerization To Low Molecular Weight Aromatics, Gayan P. Karunasinghe

Theses and Dissertations--Chemistry

The principal concept behind biorefining involves the transformation of lignocellulosic biomass into valuable products and energy resources. Historically, biorefinery strategies for lignocellulosic biomass have primarily focused on improving the conversion of cellulose into ethanol, often neglecting the underutilized lignin component. Lignin consists of phenolic subunits, from which it follows that value-added products can be obtained from lignin depolymerization. Unfortunately, lignin utilization is particularly challenging due to its high structural irregularity and recalcitrance. The goal of this study was to develop an AuPd/Li-Al layered double hydroxide (LDH) bimetallic catalyst for efficient lignin depolymerization, resulting in the production of high-value aromatic compounds. …

The Analysis Of Microplastics Found In The Flowers Of Rhode Island, Hailey Hendricks, Matthew Kiesewetter

Senior Honors Projects

No abstract provided.

Development Of Engineered Soil Surrogates For Modeling Natural Soil Sorption Behavior, Ghada Yehia Abdalla

LSU Doctoral Dissertations

The land produces more than 95% of the global food supply, and with a continuously growing population, we need to optimize the use of the available agricultural land. Soil organic matter (SOM) is an essential component of soils, especially concerning their fertility and sorption behavior. The chemical composition of the SOM consists of lipids, lignin, and cellulose. However, the heterogeneous and complex nature of SOM, and real soils, makes their study challenging and introduces uncontrollable factors.

Therefore, structural mimics of natural soils with increasing complexity representing the real soil functionality were synthesized and evaluated for bulk properties related to their …

Advancements In Bio-Based Novel (Co)Monomers For Polymeric Materials, Khristal Anne Monroe

College of Graduate Studies: Theses & Dissertations

Most current research in the area of sustainable and environmentally friendly materials relate to the use of renewable sources for the fabrication of bio-based polymers and composites. Using plant-based derivatives is a common strategy. Pine sap can be distilled into turpentines (light fraction) and pine rosin (heavy fraction). Pine rosin is obtained as a brittle solid and its major component is abietic acid. This project aims at investigating a synthetic approach for the synthesis of a pine rosin-based polymer that can be potentially used for manufacturing a collection device for pine sap. The synthetic strategy consisted in the preparation of …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.

Mesoporous Adsorbents For Perfluorinated Compounds, Bertha Lotsi

Electronic Theses and Dissertations

Effective adsorbents for polyfluorinated compounds (PFCs) were successfully prepared. And they were tested in the adsorption of perfluorooctanoic and perfluorooctanesulfonic acids. Bridged silsesquioxanes containing secondary and tertiary amino groups were synthesized by sol-gel condensation of bis[3-(trimethoxysilyl)propyl]amine and bis[3-(methylamino)propyl]-trimethoxysilane in acidic media with surfactants. Obtained materials are mesoporous with a high BET surface area. They combine high structural stability with a high concentration of surface amino groups serving as adsorption sites. Batch adsorption tests demonstrated their extremely high adsorption capacity on PFCs: in some experiments, it reached up to 88% of the adsorbent weight. Adsorption of PFCs changed the surfaces of …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Carbohydrate Polymers As Controlled Release Devices For Pesticides, Soma Chakraborty, Maria Cleofe Neri-Badang

Chemistry Faculty Publications

Controlled release technology addresses problems associated with excessive use of toxic agricultural chemicals. This paper reviews the studies on the use of carbohydrate polymers as controlled release matrices for pesticides. Alginates, starch and its derivatives, chitosan, carboxymethylcellulose and ethylcellulose are some of the natural polymers discussed in this review. The advantages and disadvantages of these polymeric systems as well as the factors that affect pesticide release are presented. A discussion on the polymers’ encapsulation efficiency and release profile is also included, which will aid future researchers in identifying the suitable formulation for controlled release of pesticides. Combination of two polymers, …

Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr

Chemical Engineering

In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …

Nanomaterials For Double-Stranded Rna Delivery, Stuart Lichtenberg

Theses and Dissertations--Plant and Soil Sciences

RNA interference has enormous potential as a potent, specific, and environmentally friendly alternative to small molecule pesticides for crop protection. The use of exogenous double-stranded RNA offers flexibility in targeting and use in crops in which transgenic manipulation is not an option. The combination of RNAi with nanotechnology offers further advantages that are not available with dsRNA alone. In this work, I have evaluated several different combinations of nanomaterials and polymers for use in RNAi-based pest control systems. First, I have characterized the use of chitosan/dsRNA polyplex nanoparticles for gene knockdown using the model nematode Caenorhabditis elegans. Though chitosan/dsRNA …

Synthesis Of N-Heterocyclic Molecules And Their Applicability Towards Ion Sensing: Polymeric Chemosensors, Aikohi M. Ugboya

College of Graduate Studies: Theses & Dissertations

Critical to biological and environmental processes are anions because often times their relative concentration in our body can be an indicator of one’s well-being. Therefore, highly sensitive and cost-efficient methods for ions recognition is necessary for human health. In recent times, polymeric chemosensors have become a vital tool for sensing ions because of its higher sensitivity and good mechanical properties compared to their monomeric counterparts. These sensors are designed to produce a measurable response in the presence of a targeted ion such as an electrochemical or optical signal. The unique structure and the photophysical properties of the 1,2,3-triazole core coupled …

Stabilized, Hybrid Solid-State Photocatalysts For Water Purification: Preparation, Properties And Performance Under Visible Light Irradiation, Karpagavalli Ramji

Seton Hall University Dissertations and Theses (ETDs)

Stabilized heterogeneous photocatalysts that use only solar light and air have been prepared and successfully employed to decontaminate water from organic pollutants. Organic dye pollutants present, for example in textile effluents, are one of the major sources of water pollution owing to their limited biodegradability, toxicity and potential carcinogenic risks. Before certifying water for public consumption, reuse in industries or for discharge in surface water the organic pollutants must be degraded, an effort that is energy intensive and currently requires complex methodologies. We report solid-state photocatalysts that use only visible light and air to treat wastewater. Perfluoroalkyl perfluoro-substituted zinc phthalocyanine …

Exploring The Effects Of Different Classroom Environments On The Learning Process. Synthesis Of Thiazole-Linked Porous Organic Polymers For Co2 Separation And Nitro-Aromatics Sensing., Davide D'Urbino

Theses and Dissertations

When attempting to study the learning process of undergraduate chemistry student, the classroom and any interaction that take place within it constitute the social context of interest. By studying how different approaches can foster different classroom environments, it is possible to approach course design from an informed and scientifically sound perspective. Thus, it becomes necessary to identify and quantify the factors that have a positive or negative effect on the classroom environment. Social comparison concerns, comfort levels and self-efficacy have been shown to be social factors that affect each other as well as the learning process and have therefore been …

Characterization Of S-Swcnt/Pf-Pd Dispersions And Networks, Tamara N. El-Hayek Ms., Jeffrey Blackburn, Andrew Ferguson, Tammy Pheuphong

STAR Program Research Presentations

Single-Walled Carbon Nanotubes (SWCNTs) are being investigated for their use in a wide variety of renewable energy applications. Their unique physical properties contribute to desirable traits such as a high carrier mobility, strong optical absorption and tunable electronic band gap. Unfortunately, due to variability in certain parameters, SWCNTs are limited in their application. The major drawback is that SWCNTs are variable in size and type and typical synthetic methods are not selective. As a result, selective methods must be developed in order to sort these tubes and extract those which are desirable for a particular application. Though there are several …

A Comparison Of Solvent And Water-Borne Alkyd Coatings And The History Of Voc Regulations In The United States, Molly Elise Burns

Master's Theses

A Comparison of Solvent and Water-Borne Alkyd Coatings Abstract

Conventional solvent based alkyd coatings have gone out of favor due to concerns over volatile organic compound (VOC) content. However, due to recent focus on renewable raw materials, alkyds are making a comeback in waterborne form. Water based alkyd coatings are known to have poor shelf stability and corrosion resistance, as well as other problems during the formulation process. This project focused on comparing solvent borne to two types of water-borne alkyds, water reducible alkyds and alkyds emulsions. The purpose was to understand the differences between the three types of alkyds …

Systematic Postsynthetic Modification Of Nanoporous Organic Frameworks And Their Performance Evaluation For Selective Co2 Capture, Timur Islamoglu

Theses and Dissertations

Porous organic polymers (POPs) with high physicochemical stability have attracted significant attention from the scientific community as promising platforms for small gas separation adsorbents. Although POPs have amorphous morphology in general, with the help of organic chemistry toolbox, ultrahigh surface area materials can be synthesized. In particular, nitrogen-rich POPs have been studied intensively due to their enhanced framework-CO₂ interactions. Postsynthetic modification (PSM) of POPs has been instrumental for incorporating different functional groups into the pores of POPs which would increase the CO₂ capture properties. We have shown that functionalizing the surface of POPs with nitro and amine groups …

Investigation Of The Chemical Protection Capacity Of Common Shoe Materials In Undergraduate Laboratories, Sarah E. Lawson

Undergraduate Honors Theses

The objective of this study was to evaluate the chemical resistance of common shoe materials regularly worn in undergraduate chemistry laboratories by subjecting the materials to hydrochloric acid and sodium hydroxide. The materials tested were leather, canvas cotton, and polyester. Due to the lack of restriction on undergraduate laboratory footwear, the research discussed in this thesis is important to undergraduate universities. Currently, many universities across the nation only require undergraduate students to wear close-toed, close-heeled shoes in chemistry laboratories, and often the resistance of the shoe material to acids and bases may not be taken into careful consideration. Overall, the …