Physical Chemistry Commons^™

Electrochemical Applications Of Single-Walled Carbon Nanohorns, Su-Ping Li, Huai-Min Guan, Shu-Yun Zhu, Muhammad Rehan Hassan Shah Gilani, Saima Hanif, Guo-Bao Xu, Yue-Jin Tong

Journal of Electrochemistry

Single-wall carbon nanohorns (SWCNHs) have unique properties, such as a large specific surface area, good electrical conductivity and biocompatibility. It has been widely utilized in many fields. In the present review, the progress in electrochemistry study of SWCNHs has been summarized and the future research trends have been proposed.

Enzyme-Based Dna Electrochemical Biosensors: Recent Trends, Chun-Shui Lin, Yi-Ru Wang, Xi Chen

Journal of Electrochemistry

DNA electrochemical sensors have greatly promoted the development of biosensors for their high sensitivity, good selectivity, short analysis time and low cost. To further improve the detection sensitivity and selectivity, protein enzymes, functional nucleic acid enzymes etc. are often used due to the advantages of high catalytic efficiency and specificity. This review demonstrates the research progress of electrochemical sensors based on enzymatic amplification and analyses some existing problems of electrochemical sensors.

Electrochemistry Of Glucose Oxidase Modified On Porin-Phospholipid Biomimic Membrane, Kun-Qi Wang, Zuo-Ming Zhang, Wei Xing, Chang-Peng Liu, Xing Zhou

Journal of Electrochemistry

Biomimic membrane with nano-channels, which is made up of porin MspA and 1,2-Dimyristoyl-sn-glycero-3-phosphocholine (DMPC) is constructed on glassy carbon substrate, and glucose oxidase (GOD) is modified on it. The direct electrochemical reaction and electrocatalytic behavior to oxygen and glucose of GOD on the GOD/MspA-DMPC/GC electreode are expounded by the cyclic voltammetric method. The study shows that GOD immobilized on porin MspA and DMPC biomimic membrane displays direct and surface-controlled electrochemical reaction nearby formal potential (E0′) of the flavoprotein active centre (FAD/FADH), and the electrochemical reaction contains two electrons and two protons exchange in 0.1 mmol·L^-1 phosphate buffer solution (PBS) …

Electrochemical And Surface Enhanced Raman Spectroscopic Studies Of Benzimidazole On Nickel Electrode, Ping-Jie Wei, Ya-Xian Yuan, Min-Min Xu, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

By measuring cyclic voltammograms and polarization curves, the inhibition effects of benzimidazole (BMIH) concentration in acetonitrile system on a nickel electrode were investigated. It was found that the oxidation and the corrosion potentials shifted positively, and the oxidation current decreased with the increase in the concentration of BIMH. Potential dependent adsorption and film formation behavior of BMIH on the nickel electrode were investigated by in situ SERS spectroscopy. With the potential moving from negative direction to positive direction, the complexes made of BIMH and nickel were formed, preventing the nickel electrode from corrosion. In addition, the 0.001 mol·L^-1 of …

Electro-Catalytic Oxidation Of Hydrogen Peroxide On Au/ L-Methionine /Gc Electrode, Jian-Feng Fan, Xue-Mei Luo, Jing Li, Lou-Zhen Fan

Journal of Electrochemistry

The modified electrodes have been fabricated by generation of Au nanoparticle chains, which was produced by reaction between HAuCl4 and sodium citrate without any additional capping agents or surfactants. The self-assembled Au nanoparticles were attached to the surface of glassy carbon electrode (GCE) layer by layer, using L-methionine (L-Met), thiourea (TU), allyl thiourea (ATU) and polyvinylpyrrolidone (PVP) as a crosslinking agent, respectively. The experimental results showed that the electrochemical performance of the different modified electrodes varied in [Fe(CN)₆]^3-/4- solution. The Au/L-Met/GCE exhibited an excellent electrochemical property, which is superior to other modified electrodes. In addition, the catalysis …

Synthesis, Characterization, And Electrochemical Evaluation Of Novel, Highly Active Catalysts For The Oxygen Reduction Reaction In Alkaline Media, Danae Jacquelyne Davis

Chemistry and Chemical Biology ETDs

Efficient electrocatalysts for the oxygen reduction reaction (ORR) are needed for fuel cells and next generation metal-air batteries, as the overall efficiency of these systems is currently limited by cathode kinetics. While Pt and Pt-based alloys demonstrate excellent electrocatalytic activities, their prohibitive cost and rarity ultimately prevents their widespread utilization. Catalyst materials that are highly active, stable, and cost effective are needed. Manganese oxide (α-MnO₂) catalysts doped with varying amounts of Cu or Ni were synthesized, characterized, and evaluated for their performance as catalysts for the oxygen reduction reaction in alkaline electrolyte. Cu-α-MnO₂ nanowire catalysts consistently attained …

Combination And Applications Of Time-Resolved Surface Plasmon Resonance Spectroscopy And Electrochemical Methods, Yu Bao, Yan Mao, Wei Wang, Zheng-Gang Li, Li Niu

Journal of Electrochemistry

Electrochemical-surface plasmon resonance (EC-SPR) technique, developed in recent years, is a new technology which combines time-resolved surface plasmon resonance spectroscopy and electrochemical methods. Surface plasmon resonance (SPR) is a physical phenomenon generated by optical coupling using a metallic thin film and is very sensitive to optical analysis. The principles of SPR and EC-SPR are briefly introduced and the applications of the combination of SPR spectroscopy with electrochemical techniques are reviewed in this paper. This new technology has been widely used in such research areas as reaction dynamics, biochemical sensors, electrode/electrolyte interfaces, kinetic parameters and bimolecular interactions.

Recent Experimental Progresses On Electrochemical Atr-Seiras, Yao-Yue Yang, Han-Xuan Zhang, Wen-Bin Cai

Journal of Electrochemistry

Technical aspects on developing electrochemical ATR surface-enhanced infrared absorption spectroscopy are briefly accounted mainly based on our recent investigations, including wet-fabrication of metallic film electrodes on Si prism, design and construction of a wide-frequency combination optical window and a spectroelectrochemical cell switchable for external and internal reflection modes.

Novel Molten-Salt Electrolysis Processes Towards Low-Carbon Metallurgy, Wei Xiao, Hua Zhu, Hua-Yi Yin, De-Hua Wang

Journal of Electrochemistry

This review focuses on recent developments in molten-salt electrolytic metallurgical processes with respect to 1) high-efficiency metallurgical technologies via electrolytic reduction of solid oxides in molten chlorides and 2) zero-carbon-footprint electrochemical splitting metallurgical technologies. Initiating with an introduction on dynamic solid/solid/liquid three-phrase interlines electrochemistry for electrochemical reduction of solid cathode, the former aspect is discussed in terms of facilitating mass transfer throughout solid cathode, one-step production of functional alloy powders with the assistance of under-potential electroreduction of active metals and near-net-shape production of metal/alloy components. Whilst the latter is summarized by introducing some zero-carbon molten-salt electrolytic technologies including electro-splitting of …

On The Molecular Mechanism Of Electron Transfer Of Cytochrome C Modulated By Gold Nanoparticles In Nano-Sandwich Architecture, Shou-Rui Lin, Li-Xu Wang, Xiu-E Jiang, Li-Ping Guo

Journal of Electrochemistry

The effects of adsorbed gold nanoparticles on the surface-enhanced infrared absorption (SEIRA) difference spectra of redox-induced cytochrome (Cyt) c in AuNPs/Cyt c/Au sandwich architecture were monitored by SEIRA spectroscopy. The results indicated that the intensity of SEIRA difference spectrum for the vibration of the heme was significantly increased due to the adsorption of gold nanoparticles on the Cyt c. This was induced by the electron transfer between the heme and the gold nanoparticles, which also promoted electron transfer of adsorbed protein. This study suggested a new technique for optimizing the electrochemical property of adsorbed protein.

Electrochemical Study Of Protein Modification, Jing Zhao, Xiao-Li Zhu, Gen-Xi Li

Journal of Electrochemistry

Protein post-translational modification is a key physiological procedure, which has received more and more research interests from the scientists not only in protein science but also in some other fields. The usually employed techniques for the study of protein modification include mass spectrum, affinity chromatography, etc. Considering the complexity of protein modification and the urgent demand of such kind of study, it is highly required to develop new techniques to perform more studies. Electrochemical methods, which have been widely used in chemical study and analysis, are playing an increasingly important role in many fields of biological studies. The modification of …

Electrochemical Behavior Of Imidacloprid, Jie-Qiong Wang, Wang Zhang, Ming Chen, Guo-Wang Diao

Journal of Electrochemistry

The electrochemical behavior of imidacloprid（IDP）on glassy carbon electrode has been investigated by cyclic voltammetry. The result shows that the electrochemical reduction of IDP is irreversible and controlled by diffusion. At 25 ℃, the numbers of the electrons transferred of IDP in the electrochemical reaction are four. The diffusion coefficient of IDP is 2.44×10⁶ cm²·s^-1 and the diffusion activation energy is calculated to be 9.33 kJ·mol^-1.

Synthesis, Extraction, Dissolution, And Voltammetry Of F-Species In A Room Temperature Ionic Liquid Solvent, Wendy Jacqueline Pemberton

UNLV Theses, Dissertations, Professional Papers, and Capstones

Room temperature ionic liquids (RTILs) are salts that are liquids from as low as -96 °C to up to 100 °C. RTILs are of high interest in many fields of study because of their negligible vapor pressure, high electrochemical stability, high conductivity, and wide electrochemical windows. These diverse solvents have recently been used in organic synthesis, as extraction solvents, and as electrochemical solvents. It is as a direct result of the multifunctional capabilities of these RTIL solvents that they are examined in this work. The ability to probe the chemistry of lanthanides and actinides is based on the unique properties …

Electrochemical Deposition Of Zinc Oxide Crystal Whiskers, Peng-Zeng Lu, Su Li, Jin-Qian Jia, Zhen-Hai Liang

Journal of Electrochemistry

Pine needle ZnO crystal whiskers were electrodeposited by anodization of zinc foil.The crystal whiskers were characterized by scanning electron microscopy(SEM) and X-ray diffraction(XRD) spectroscopy.The results show that the lengths and diameters of ZnO crystal whiskers are 200~300 nm and 20~50 nm,respectively,with the ratio of the length to diameter ranging from 10~15.The whiskers belong to wurtzite ZnO(JCPDS 36-1451) with good crystallinity and high purity.The crystalization behavior of ZnO was studied by cyclic voltammetry.The effects of the surface oxide layer at the zinc substrates and the [Zn(OH)₄]^2-concentration of the aqueous electrolyte on the formation of zinc oxide whiskers …

Investigation Of Titanium Nitride As Catalyst Support Material And Development Of Durable Electrocatalysts For Proton Exchange Membrane Fuel Cells, Bharat Avasarala

Legacy Theses & Dissertations (2009 - 2024)

The impending energy and climatic crisis makes it imperative for human society to seek non-fossil based alternative sources for our energy needs. Although many alternative energy technologies are currently being developed, fuel cell technology provides energy solutions, which satisfy a wide range of applications. But the current fuel cell technology is far from its target of large scale commercialization mainly because of its high cost and poor durability. Considerable work has been done in reducing the cost but its durability still needs significant improvement. Of the various materials in a PEM fuel cell, the degradation of electrocatalyst affects its durability …

Electrochemical Performance Of Zinc Tetra (Trifluoroethoxy) Phthalocyaninate In Aqueous And Nonaqueous Solvents, Xiao-Shan Wu, Li-Ying Huang, Jin-Que Zhang, Shan-Lan Zhu

Journal of Electrochemistry

The cyclic voltammetric performance of ZnPcF in N,N-dimethylformaide(DMF),dimethyl sulfoxide(DMSO) solution and phosphate buffer solutions(PBS) has been examined.The results showed that four pairs of redox peaks appeared in nonaqueous solvents,and the values of half-wave redox potential were 0.558 V,-0.761 V,-1.034 V,-1.417 V,respectively,exhibiting four quasi-reversible phthalocyanine ligand based one-electron transfers.In PBS only two redox peaks were observed and the values of half-wave redox potential were-0.885 V,-1.104 V,exhibiting irreversible behavior characteristics.Comparing to the zinc phthalocyanine(unsubstitute ZnPc),introducing electron-withdrawing groups-trifluoroethoxyl to the peripheral sites of the phthalocyanines shifts the redox processes of the complex toward positive potentials.

In-Situ Surface Enhanced Raman Scattering Electrochemical Investigation Of 4-Aminoantipyrine On Silver Electrode, Li-Jun Zhang, Wei Song, Ling Chen, Zong-Rang Zhang, Hai-Feng Yang

Journal of Electrochemistry

In this paper, 4-AAP was self-assembled on silver surface to form monolayers. Surface-enhanced Raman Spectroscopy (SERS) was used to in-situ investigate the adsorption mechanism of the 4-aminoantipyrine(4-AAP) on silver surface dependent on shifting potentials and the effect of solution pH. Based on density functional theory(DFT) calculation of vibration modes,approximate assignment of 4-AAP SERS spectrum was conducted. In situ SERS spectral electrochemical experiments indicated that the 4-AAP monolayers experience a dynamic adsorption process from a tilted fashion to a more vertical mode for benzene ring and more parallel for pyrine ring with the potential applied toward more negative voltages. The complete …

Electrochemical Surface-Enhanced Raman Spectroscopy—Current Status And Perspective, Bin Ren, Jian-Feng Li, Yi-Fan Huang, Zhi-Cong Zeng, Zhong-Qun Tian

Journal of Electrochemistry

Electrochemical interface is a very important interface closely related to various energy and life processes. Surface-enhanced Raman scattering was widely used in electrochemistry soon after its discovery to understand the surface bonding,configuration,and orientation of the surface species. In recent 10 years,the fast development of nanoscience and nanotechnology has offered SERS with abundant substrates and characterization methods,which has allowed impressive development of electrochemical SERS. This articles will follow the time line to make systematically overview of SERS on Au and Ag,thin-layer transition-metal SERS,pure transition metal SERS,core-shell SERS and those methods for studying single crystal surfaces,including gap-mode SERS, TERS and SHINERS. Emphasis …

Fabrication Of Electrochemically Activated Glassy Carbon/Bismuth Film Electrodes For Sensitive Analysis Of Pb(2+) And Cd(2+), Kang Shi, Wen-Jing Wang, Kun Hu

Journal of Electrochemistry

The application of electrochemically activated glassy carbon (GC) in the in-situ preparing of bismuth film electrodes (BiFEs) to analyze Pb^{2 +} and Cd^{2 +} was investigated. The glassy carbon electrodes were electrochemically activated by either potentiostic or cyclic polarization in 1 mol·L^-1 NaOH solution. Experimental results show that employment of HCl solution as the analytical solution not only can reproducibly renew the electrochemically activated GC electrode surface with an electrochemical clear procedure, but also can greatly enhance the sensitivity of BiFes method for analysis of Pb^{2 +} and Cd^{2 +}. The test range thus …

Synthesis And Development Of Novel Fullerene-Based Structures For Photovoltaics, Electronic Applications And Mri Contrast Agents, Manuel Chaur

All Dissertations

Metallic nitride endohedral metallofullerenes (EMFs) are one of the most interesting types of metallofullerenes due to their high yields and interesting electronic properties. The synthesis of these compounds allows the encapsulation of different metals inside fullerenes making it possible to combine the properties of the metal with those of the fullerene. Their interesting electrochemical and optical features make them potential candidates for several applications such as molecular electronics, biomedical imaging, non-linear optical devices, and magnetic resonance imaging (MRI) agents. This thesis reports the synthesis of novel metallic nitride EMFs based on Gd, Nd, Pr, Ce and La. These families of …

Electrochemical Characteristics Of Vitaminb6 At Polybromocresol Green Modified Electrode, Jun Yao, Jiang-Yuan Li, Yang Luo

Journal of Electrochemistry

Electrochemical characteristics of VB₆ were investigated at PBG modified electrode by Cyclic voltammetry and linear sweep voltammetry.The VB₆ produced an irreversible oxidation peak at 0.978 V(Vs.SCE) in HAc-NaAc(pH=4.0) buffer solution over the potential range of 0.7 to 1.2 V.The electron number,the proton number,the transfer coefficient were determined to be 1,1 and 0.37,respectively.The oxidation peak currents of VB₆ versus its concentration showed a linear relationship in the concentration range of 1×10^-3~2×10^-5mol/L with the correlation coefficient of 0.9967 and the detection limit of 2×10^-6mol/L.The recovery was 100.06%.

The Endpoint Determination In Hydrochloric Pickling By Electrochemistry Method, Shu-Jie Chen, Chun-Jie Ye, Hong-Liang Pan

Journal of Electrochemistry

Pickling is an effective way to remove the oxide scale covered on steel materials.It is vital to determine the endpoint in the course of pickling process investigation.According to the reaction process of the oxide scale covered on hot-rolling strips with the hydrochloric acid,a method for determining the endpoint of pickling based on electrochemical principle was suggested.In the pickling experimentation of hot-rolling strips,an accurate precision can be obtained using this method.

Performance Of Magnetic Field Coupled With Electrochemical Process For Preparing Polyaluminum Chloride, Ke-Wu Pi, Wen-Qi Gong, Zheng-Qing Huang

Journal of Electrochemistry

Polyaluminum chloride(PAC) was prepared by electrochemical process coupled with magnetic field paralleling to the gravitation direction.The electrolyte of 0.1 M AlCl3 solution was used,with the iron plates as cathode and aluminum sheets as anode.PAC of 0.6 M total aluminum(AlT),83.2% Alb to AlT and basicity(Ba)=2.4 was synthesized when magnetic flux density was 0.4T,the distance of electrodes was 15 mm,the voltage of electrolysis cell was 2.4 V and current density was 300 A/m2.Under above experimental conditions,the voltage efficiency,energy efficiency and electrodes surface area to reduction cells of electrochemical reactor were 85.2%,81.5% and 140.1m2/m3,respectively.The polarization curves determined by constant-current method showed that the …

Preparation Of Zn-Ni Alloy Whisker By Electrochemical Method, Zhen-Hai Liang, Xi-Hua Xia

Journal of Electrochemistry

The Zn-Ni alloy whiskers were prepared by electrochemical method and were characterized by XRD, SEM and EDS methods. The results showed that Ni₅Zn₂₁ and Ni₃Zn₂₂ whiskers were obtained with the length of 2~4 μm and the diameter of 250 nm, thereby the rations of length/diameter fell between 8 and 16. The electrochemical behavior was investigated by cyclic voltammetry method simultaneously. A new method was provided on whisker preparation based on this work.

Electrochemical Separation Of Curium And Americium, David W. Hatchett, Kenneth Czerwinski

Separations Campaign (TRP)

The objective was to use electrochemical techniques to develop a thermodynamic understanding of actinide and lanthanide species in RTIL solutions, and use this data to effectively separate species with very similar chemical properties.

In consultation with a DOE collaborator, electrochemical methods and materials were evaluated and used to exploit the thermodynamic differences between similar chemical species enhancing the ability to selectively target and sequester individual species from mixtures. This project, in its third year, successfully completed phases 1, 2. Phase 3 was partially completed. The project expanded to include phase 4.

The following were specific goals for 2007-2008:

• To …

F-Element Electrochemistry In Rtil Solutions: Electrochemical Separation Of Lanthanides And Actinides, David W. Hatchett

Separations Campaign (TRP)

Electrochemical methods can be used to effectively separate actinide and lanthanide species from complex mixtures. This is based on the unique electrochemical properties of each specific target species. In studies it has been found that, with the exception of Ce, aqueous solutions provide unsuitable electrochemical windows to effectively evaluate the thermodynamic properties that are useful for chemical separations. Therefore, a more novel approach was examined which eliminated the aqueous solution with a room temperature ionic liquid (RTIL) solution. RTIL solutions do not suffer from the side reactions that are prominent in aqueous environments. In addition, the potential window is much …

Investigation On The Electrochemical And Spectra Properties Of Myricetin, Dong-Mei Wu, Shuang Liu, Hong-Fu Gao, Jin-Lian Li, Hai-Yan Liu, Qi-Chao Liang

Journal of Electrochemistry

The electrochemical mechanism of redox and stability of myricetin were investigated using cyclic voltammetry and electronic absorption spectra.Two oxidation reactions and two reduction reactions were achieved in B-R buffer solution.The oxidation reactions were both due to oxidation of 4′-OH on ring B and 3-OH on ring C within a one electron one proton process.The reduction reactions both correspond to the transformation of 4-carbonyl group on ring C to intermediate radical,and intermediate radical to hydroxyl group within a one electron one proton process,respectively.The redox of myricetin is pH dependent because of deprotonation,resulting in an increase of the antioxidant ability upon formation …

Template Synthesis And Electrochemical Studies Of Ag(Core)Au(Shell) Nanowires, Li Ling, Ya-Xian Yuan, Min-Min Xu, Jian-Lin Yao, Ren-Ao Gu

Journal of Electrochemistry

Agcore Aushell nanowires with different thicknesses were prepared by combining template synthesis and chemical reduction method,and characterized by SEM and cyclic voltammetry(CV).The CV results revealed that the AgcoreAushell nanowires with pinhole were transferred to pinhole free structure after several potential scans.By using thiophenol(TP)and p-aminothiophenol(PATP)as probe,the surface enhanced Raman scattering(SERS)effect was investigated on the core-shell nanowires.The results indicated that AgcoreAushell nanowires could be served as a potential SERS substrate,and the difference in the spectral feature of PATP adsorbed onto Au and Ag nanowires enable us to diagnose the pinhole effect of core-shell nanowires by SERS.

Study On The Electrochemical Extraction Of Oxygen And Influence Factors Of Oxygen Purity, Xiao-Ke Zhi, Guang-Chuan Liang, Xiu-Qin Ou, Shu-Guang Liu, Bin Han

Journal of Electrochemistry

A method for the electrochemical extraction of oxygen is prasented.The concentration of HO₂^-ions and the purity of oxygen were measured by KMnO₄ standard method,and by cuprammonium absorb method respectively.Effect of the membrane and the spacing between cathode and anode on the purity of oxygen were also tested.The experiment results were showed that the system could work continuously above 500h and the purity of oxygen was above 99.8% when using proper membrane at 80 mA·cm^-2 current density,Electrochemical reaction included 4e reacting course and 2e reacting course,the ratio of 2e reaction is about 38%~44% of the whole …

Electrochemical Separation Of Curium And Americium, David W. Hatchett, Kenneth Czerwinski

Separations Campaign (TRP)

The objectives of this project are to use electrochemical techniques to develop a thermodynamic understanding of actinide and lanthanide species in RTIL solution, and to use this data to effectively separate species with very similar chemical properties. In consultation with a national laboratory collaborator, electrochemical methods and materials will be evaluated and used to exploit the thermodynamic differences between similar chemical species, enhancing the ability to selectively target and sequester individual species from mixtures. This project is in its third year and has successfully completed phases 1 and 2. Phase 3 has been partially completed. The tasks have been expanded …